Convert LabV 5.1 *.llb to 2013

Can somone please upconvert this LabV 5.1 llb to 2013? Thanks...
Solved!
Go to Solution.
Attachments:
Financial front panel.llb ‏671 KB

Mass compiled in 8.2.1, which you can open with 2013.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Financial front panel.llb ‏464 KB

Similar Messages

Help needed to convert 4.0 version llb to 6.0 or above

Can some help me convert the attached old llb (written in LV 4.0) to 6.0 or higher version so I can open it in LV 2012? Thx
Solved!
Go to Solution.
Attachments:
igorbin4.llb ‏315 KB

Try posting here: http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion
Just for reference, here is a chart to help you know the minimum versions required. Version 6.0+ is correct.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos!

Can I convert a 2010 CAB file to 2013 CAB file?

Can I convert a 2010 CAB file to 2013 CAB file?
For further information:
We generate CAB files from MMS Term Store and send it to other teams. Currently we are using 2010 and few consumers are requesting to send a 2013 CAB file. So my question is, can a convert a 2010 CAB file to 2013 CAB file?
Help is appreciated.
Thanks,
Praveen

it seems there is no difference between the cab file that SharePoint 2010 exported, and cab file 2013 exported.
we can export the cab file from 2010, then import to 2013 managed metadata service.
during this step, please make sure the the account you use is added to the relative db 'bulkadmin' permission, then execute following script to import:
$mmsApplication = Get-SPServiceApplication | ? {$_.TypeName -eq "Managed Metadata Service"}
$mmsProxy = Get-SPServiceApplicationProxy | ? {$_.TypeName -eq "Managed Metadata Service Connection"}
Import-SPMetadataWebServicePartitionData $mmsApplication.Id -ServiceProxy $mmsProxy -Path "C:、mmsdata.cab" -OverwriteExisting
Qiao Wei

Convert LabV 7 to 2013

I have 2 vi's I'd like upconverted from LabV express 7 to 2013. Thanks..
Solved!
Go to Solution.
Attachments:
System_Trigger_for_DG535.zip ‏205 KB

You can convert it yourself. Version 7 files can be read by 2013.

Converting Word Templates from 2003 to 2013 Version

Hello. I work at a school environment and most of our secretaries had been running Office 2003. They have a lot of Word templates. Recently, as we have decided to upgrade Office to 2013, we have the problem of hundreds of old templates
that need to be converted over to the 2013 version.
Is there a quick and efficient way to do this? Instead of manual converting each file, one by one.
Thanks in advance!

In addition to the answer of Edward I would add the following line of code:
Sub Convert2003To2013()
' Convert2003To2013 Macro
Application.ScreenUpdating = False
Dim strFolder As String, strFile As String, wdDoc As Document
strFolder = "D:\Sample\OfficeDev\Word\OldFolder"
If strFolder = "" Then Exit Sub
strFile = Dir(strFolder & "\*.doc", vbNormal)
While strFile <> ""
If InStrRev(strFile, ".docx") = 0 Then
Set wdDoc = Documents.Open(FileName:=strFolder & "\" & strFile, _
AddToRecentFiles:=False, Visible:=False)
wdDoc.Convert
wdDoc.SaveAs2 FileName:=strFolder & "\" & Left(strFile, InStrRev(strFile, ".doc")) & "docx", _
Fileformat:=wdFormatXMLDocument, AddToRecentFiles:=False
wdDoc.Close SaveChanges:=False
End If
strFile = Dir()
Wend
Set wdDoc = Nothing
Application.ScreenUpdating = True
End Sub
I added the wdDoc.Convert because otherwise you are not explicitly converting documents but only renaming them to .docx
The additional functionality of Office 2013 comes available when the document is actually converted. You can test this by opening the document after het has been really converted, you should be able to see the SmartArt options. If you only rename them to
.docx you will see that the 'new' smart art functionality is not available.
Doesn't mean that the provided code block by Edward doesn't work, it does a great job. My advice would be to add the convert line if you really want 'converted' files.
Last thing you have to think about is these code snippets use SaveAs2, that means that you will get two instances of your document. If you choose convert you are actually converting the original document. In that case you do not choose SaveAs2
but you use Save.
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

Converting from InMotion Hosting to Exchange 2013 Migration

Hello everyone,
We are looking to convert our current mail service being hosted on InMotion using POP3 to our Exchange 2013 server. Is there a migration guide somewhere I could find or something to lead me in the right direction? We want to forward the mail from InMotion
to the Exchange mailboxes as well. I know this involves converting MX records and the such but I feel like something is missing in the grand scheme of things.

Hi,
The migration can include:
1. Account migration.
2. Database migration.
3. Some A and MX records need to be configured.
For more details, you can either consult Inmotion support or Microsoft support below:
Inmotion Support
https://www.inmotionhosting.com/support/launch-chat/?rdid=2324923566971164486&url=http%3A//www.inmotionhosting.com/support/email/general-information/getting-started-guide-email
Microsoft Advisory Support
https://support.microsoft.com/gp/advisoryservice
Thanks,
Simon Wu
TechNet Community Support

Xi Pro wont convert all sheets of an Excel 2013 to pdf

When using the "combine files in Acrobat" only sheet #1 of the spread sheet is converted. However, this only happens on our machine that has Excel 2013. The same documents are converted flawlessly when the feature is used on a machine that has Excel 2010.

Hi,
Kindly post your query in Adobe Acrobat forum:Acrobat
Regards,
Florence

Convert RDL to RDLC in vs 2013

Hi I am trying to covert rdl file to rdlc.
rdl created in vs2013(SQL Server 2014) and I am add this also in vs 2013 project.
I rename rdl file to rdlc and place in project.assign data set ,but when run no error occurred but also report will not shown.
but if I add report in project using add new item its working fine .
any idea/possibility why its not working and how I make it working?
I also try https://msdn.microsoft.com/en-us/library/ms252109%28v=vs.80%29.aspx

Hi kuntalb,
As my understanding, you want to add drillthrough action to the second label report, if that is the case, please refer to the following article:
https://technet.microsoft.com/en-us/library/ms159847(v=sql.100).aspx
In addition, since the issue regards SQL Server Reporting Services. I suggest you post the questions in
SQL Server Reporting Services forums. It is appropriate and more experts will assist you.
Regards,
Michelle Li

Requesting .llb with 14 .vi's from 5.1 to 2013

Hello again, I am delighted how active and helpful this community is. I am requesting a library containting 14 .vi's made in labview 5.1 to be converted to be compatable with labview 2013. The library of interest is attached. Cheers.
Solved!
Go to Solution.
Attachments:
KE6485 Examples.llb ‏795 KB

Hi,
Here it is in LV 8 You can read this in LV 2013
Kees
Attachments:
Mass Compile.zip ‏232 KB

How do you convert OPC servers 2012 opf file to OPC servers 2013?

When I upgraded from LV 2012 to LV 2013 SP1 my NI OPC Servers 2012 was also involuntarily upgraded to 2013. Now my shared variables don't work. How do you migrate or convert a 2012 *.opf file to 2013? The only clue given by the software Help file is a hint that ProgID Redirect can be used, but there is no explantion of how or where to find this feature or how to use it!

Hi JT1958,
I set up a system that had LabVIEW 2012 along with NI OPC Servers 2012 and upgraded it to 2013. I found that the .opf file I created from NI OPC Servers 2012 was able to be opened by NI OPC Servers 2013 without any issues and I was able to access the tags from a LabVIEW project. However, one difference between our setups is that I did not upgrade my project from LabVIEW 2012 to 2013 - I create a new project in LabVIEW 2013.
Are you getting any error message when you try to open the .opf file in NI OPC Servers 2013? Or did it seem to import correctly? What if you try to create new bindings for a few shared variables rather than using your existing shared variables (just to see if it works)? Perhaps some of the references just need to be updated.
Hope this helps!
Best Regards,
Matthew B.
Applications Engineer
National Instruments

How to Export Import vCard contacts in Outlook 2013? Does it convert multiple Contacts at once?

I am using latest edition of Microsoft Outlook 2013. I believed that it will definitely help to convert 1500 vCards contacts into Outlook 2013, all at once, but it is not supported to be possible because, still, Outlook 2013 has not improved in this direction.
Any hope for me rather than exporting or importing contacts one by one???

If it is one time requirement, simply use vbacode but it exports few garbage values. I tried this code and got below given garbage value (in place of image) apart from real one in every vCards. Vbacode did not export images:
X-MS-CARDPICTURE;TYPE=JPEG;ENCODING=BASE64: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X-MS-OL-DESIGN;CHARSET=utf-8:<card xmlns="http://schemas.microsoft.com/office/outlook/12/electronicbusinesscards" ver="1.0" layout="left" bgcolor="ffffff"><img xmlns="" align="fit" area="16" use="cardpicture"/><fld xmlns="" prop="name" align="left"
dir="ltr" style="b" color="000000" size="10"/><fld xmlns="" prop="org" align="left" dir="ltr" color="000000" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="telwork" align="left" dir="ltr" color="000000" size="8"><label
align="right" color="626262">Work</label></fld><fld xmlns="" prop="telcell" align="left" dir="ltr" color="000000" size="8"><label align="right" color="626262">Mobile</label></fld><fld xmlns="" prop="email" align="left"
dir="ltr" color="000000" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld
xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/></card>
REV:20130313T094717Z
END:VCARD
As my no of vcards were limited, so i removed this value manually from all and missed my vcard avatar.
If your requirement is on regular basis or permanent and vcards have profile images then simply call to vCard magic application that seems pretty good.

Please Convert Vis from Labview 2013 to Labview 2011

Please convert the attached Vis from Labview 2013 to Labview 2011
Solved!
Go to Solution.
Attachments:
Convert from2013 to 2011.zip ‏255 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Converted to 2011.zip ‏176 KB

Convert 8.5 llb to 8.2 llb

Can anyone convert those 8.5 LLB to version 8.2 or older. I cannot access them with LabView 8.2
m.s.m.
Solved!
Go to Solution.
Attachments:
LC100.llb ‏818 KB
LC1_Drv.llb ‏504 KB
LC1.llb ‏413 KB

We have a thread for this: Downconvert Requests Thread. The link for it is right on the front page of the forums in the Announcements section.
In the future please post your requests there.
Attachments:
LC1 8.2.zip ‏184 KB
LC1_Drv 8.2.zip ‏198 KB
LC100 8.2.zip ‏388 KB

How to make SharePoint 2013 convert License type in PowerShell?

How create script for passing Product Key for converting farm license type for Sharepoint 2013 like it is describied below:
http://macslui.blogspot.com/2013/02/sharepoint-2010-convert-license-type.html

How create script for passing Product Key for converting farm license type for Sharepoint 2013 like it is describied below:
http://macslui.blogspot.com/2013/02/sharepoint-2010-convert-license-type.html
All of the methods for licensing are marked internal, so without reflection you wouldn't be able to set the license via PowerShell.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What is best practice to convert a SP2010 Solution to a SP2013 Solution

Hi,
i have developed a Solution for SharePoint 2010 which includes some WebParts, some Custom Application Pages and a TimerJob.
I would like to convert this Solution to a SharePoint 2013 Solution.
What is the preferred way to do this?
Best Regards
Bog
Developers Field Notes | www.bog1.de

Check below article which explains in details about converting SharePoint 2010 solutions and projects to SharePoint 2013
http://zimmergren.net/technical/upgrading-your-sharepoint-2010-visual-studio-projects-and-solutions-to-sharepoint-2013
if you have multiple projects which need to be migrated you can use the below powershell script
http://www.codeproject.com/Articles/522220/ConvertingplusmultipleplusSharePointplus2010pluspr
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Convert LabV 5.1 *.llb to 2013

Similar Messages

Maybe you are looking for