Convert labview 10 to labview 9

Please convert from labview 10 to labview 9
Thanks
Solved!
Go to Solution.
Attachments:
Error Processor.vi ‏21 KB
Error Options.ctl ‏6 KB
Error prompt.vi ‏52 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Error Processor.vi ‏20 KB
Error prompt.vi ‏34 KB
Error Options.ctl ‏5 KB

Similar Messages

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

DC to DC converter basics using Labview on FPGA Control with VHDL

DC to DC converter basics using Labview
I am fairly a novice, that is why simplifications required, before I begin thanks in advancefor them who will response
I am designing a DC to DC (Intermediate Bus Converter, a step down BUCK converter, of 24 v input and output 9 v and 5 amp current output), using FPGA controller, I need to program this using VHDL, for which I take LabVIEW, but as I am new so do not have any idea as what are the steps that I need to take for implementation, what types of function that FPGA does in this so that it can generate 24 v and what other mechanisms that have to control inside or outside of FPGA programming and designing that it can give the desired output voltage, if you have any idea about this then I would be glad to receive the steps that are necessary to complete this

NI supports two Spartan 3E products through either LabVIEW FPGA or MultiSIM, the Digital Electronics FPGA Board (http://sine.ni.com/nips/cds/view/p/lang/en/nid/207010) and, if you are in academia, the Xilinx Spartan 3E XUP starter board (as linked by Dennis_Knutson).
Also note that if you wanted to implement some logic in VHDL and have access to that logic in a LVFPGA diagram, you could utilize the Component-level IP (CLIP) fuctionality (http://zone.ni.com/reference/en-XX/help/371599G-01/lvfpgaconcepts/using_component_ip/)

How to convert Subvi into Labview function

Hi,
I made costum vis of UDP Read and Write using dot net functions.when i tried to Make them reentrant. It is halting the application.
i want to run these vis in sepate thread.
Can you please tell me how can i convert sub vi in labview fuction(like yellow one in Function pallet eg.Index arry or replace array).
Regards
Sandeep soni
9922958092

From help
Adding VIs and Controls to the User and Instrument Drivers Subpalettes
Adding VIs and Controls to the User and Instrument Drivers Subpalettes
The
User Controls and User Libraries palettes
contain subpalettes for each directory, LLB, or palette (.mnu) file in labview\user.lib and icons for each file in labview\user.lib.
Save
subVIs in the user.lib directory only if they are usable, without
modification, across projects. Paths to VIs in user.lib are relative to the labview directory. Paths to subVIs you save elsewhere are
relative to the parent VI. Therefore, copying a VI from user.lib to modify it for a special case does not change
the path to its subVIs located in user.lib.
Caution Do not save
your own VIs and other files in LLB
files installed with LabVIEW. Save your controls and VIs in the user.lib directory to add them to the
Controls and Functions
palettes.
Complete the following steps to add new VIs and controls to the
user palettes.
Save the controls and VIs in the labview\user.lib directory to add them to the
User Controls and User Libraries palettes,
respectively.
Restart LabVIEW. LabVIEW updates the palettes to contain the controls and
VIs in the labview\user.lib directory.
The
Instrument Drivers palette corresponds to the labview\instr.lib directory. Save instrument drivers in
this directory to add them to the Functions palette.
Note If you add a subdirectory or LLB to the labview\user.lib or labview\instr.lib directory and the subdirectory or
filename begins with an underscore (_), the
contents of the subdirectory or file do not appear on the User
Libraries or Instrument Drivers palettes.

Converting Units in LabView and specifying sampling rate with Universal Library functions

Hi,
I am having trouble converting units in LabView 7.0 and having it write to a file / output on a chart in Nm instead of in volts. I can't seem to find any straightforward instructions, eventhough it seems like a simple task.
Another task that would seem rather simple is changing the sampling rate with the XAIn program from the Universal Library for LabView (this is version 5.40).
If anyone could help me out, I would greatly appreciate it - I have tried other sources without much luck!
Thanks
Jenna

Are you really needing to change units or do you need to scale the voltages read from your sensors? If it's scaling, it would be trivial to set this up in mAX or with the DAQ Assistant if you were using an NI board. Since you are not, then you could use the Scaling and Mapping Express VI. The y axis of a chart is just a label. You can use the text tool to change it to anything you want.
I have no idea how to change sample rate for your board. Have you asked the vendor?

Labview version 7.1 is too old to convert to current Labview version 8.0

I had developed my Labview code sometime back using LV-7.1 and now I am trying to deploy it on a new PC. The Test Stand version that I have is 3.1. I did everything right and after I installed my deployment package, I get the error that the Labview version 7.1 is too old to convert to current Labview version 8.0.
I am going to look into converting my code using Labview 8.0, but I am puzzled, why would it matter, as am using the same Labview (7.1) and TestStand (3.1) as before, and getting this error? I also installed the old Traditional DAQ drivers (instead of the DAQmx) and so everything is the same except that the PC is new.
Shoab
Attachments:
ErrorMessage.jpg ‏225 KB

Hey Shoab,
Are you getting this when you run the sequence in the Sequence Editor? If so then I would suggest checking the adapter configurations. Go to Configure>>Adapters select LabVIEW and click the Configure.. button. Once in there you can change the run-time engine to 7.1.
Let me know if that helps.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Can convert it to labview 8.5

hi
can convert it to labview 8.5
thanks
Attachments:
SFC or GRAFCET of Moving Wagons.vi ‏28 KB

I included your other VI in this zip file as well.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
moving wagons.zip ‏31 KB

Convert cvi to labview

I have some C code that was developed using LabWindows/CVI and is controlled with TestStand 3.1. We also have some new development that we want to begin soon. Both efforts are do a great deal of communiction with hardware and test equipment. We'd like to use LabView on the new development. My questions...
1) What types of issues should we expect to encounter if we try to convert the CVI / TestStand effort to LabView.
2) Does it make sense to do this, or should the CVI tests (currently in a DLL) remain and should the new tests be written in LabView (RealTime) and all tests coordinated through TestStand.

The only way to convert CVI to LabVIEW is to use Tools>Instrumentation>Import CVI Instrument Driver. However, all this does is put a LabVIEW wrapper around the CVI DLL so the conversion will gain you nothing. The only real conversion is to completely rewrite your CVI functions in LabVIEW. I freely mix and match TestStand steps types with no problems. Some are CVI DLLs, C++ DLLs, LabVIEW DLLs, and some are LabVIEW VIs. I'd focus on the new development.

Use NI LabView and LabView RT with third party PXI chassis

I want to use NI LabView and LabView RT, some PXI chassis of N.I and
some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
Pharlap ETS ( LabView RT ) on those third party PXI's.
More simply
Third party PXI chassis and controllers support LabView RT or not?
Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
"You can't. I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers. There is no way to get LabVIEW-RT running on a controller not purchased from NI. You will have to use a standard RTOS like Linux,VxWorks, or QNX.
Regards

As described in the web links below, the only way to run LabVIEW Real-Time for ETS on a third-party system would be to follow the procedure for desktop PC computers. You may find that your third party PXI controller may meet the requirements listed in the below link and you will be able to run Real-Time on the controller. If you decide to do this, you will need to purchase the LabVIEW Real-Time Desktop Deployment license (also linked below). After purchasing the deployment license, you will be sent boot disks that will install the real-time OS onto your system. There is no need to purchase Pharlap ETS from Ardence directly.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?OpenDocument
http://sine.ni.com/nips/cds/view/p/lang/en/nid/13751
Instead of using LabVIEW Real-Time for ETS, you could use LabVIEW Real-Time for RTX instead. This system allows you to run Windows and the Ardence Real-Time eXtensions (RTX) real-time kernel concurrently on one machine. Currently device support for LabVIEW RT for RTX systems is limited to RIO devices. This is all described in the below link.
http://zone.ni.com/devzone/conceptd.nsf/webmain/9cc60298315a687e86256e78007b3a96
I hope this answers your question.
Regards,
Kristi H - National Instruments

Send sms from Labview without LabVIEW 8.0 PDA module

Does anyone can send sms from Labview without LabVIEW 8.0 PDA module?

You can get a wireless (GSM) modem for the pc. There have been some discussions here that you can do search for. One is http://forums.ni.com/ni/board/message?board.id=170&message.id=142443&view=by_date_ascending&page=1.

Convert vi from LabVIEW 5.0 to v.8.2

Hello-
I am trying to open a subVI in LabVIEW 9.0 but it was written for v. 5.0... someone told me that if I open the vi in a version before 8.2 and save it, then I should be able to open it in 9.0. I don't have any version before 9.0 so he suggested that I post the file on this forum... I have attached the subVI so if someone could please convert it (who has a version of LabView older than v. 8.2) it would be much appreciated!
Thanks!
Attachments:
SBImodem.vi ‏49 KB
SBIprinter.vi ‏49 KB

Hi NEGR,
as long as you don't give us the missing subvis it's pretty useless to convert the vis...
(Now in LV7.1)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
SBImodem.vi ‏34 KB
SBIprinter.vi ‏34 KB

I can't convert .vi from labview 5.0 to 8.6

I'm tring to convert a labview project from 5.0 version to 8.6 version. I know that direct conversion is not possible. I saw at this link:
http://zone.ni.com/devzone/cda/tut/p/id/8387
that conversion is possible by intermediate comnversion with 8.0 version (I have it).
Unlikely somethings wrong happen when I try to open my original labview 5.0 .vi with 8.0 version.
Do someone know alternative version to convert my project????
thanks in advance
A.
Attachments:
scrivemoo.vi ‏116 KB

albs wrote:
this is strange because I open it without problems with labview 5.0. I try to attach it again
thanks
There is still a problem with that VI. Are you sure it's written in LV 5. I get the error which is shown below. But PLEASE move this conversion to HERE
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012

How to convert dasylab to labview

Hi all,
I get a project invovled a serial port reading, then use the band pass filter and FFT to process the signal. At last, locat the peak frequency of the spectrum. This project used to be achieved by dasylab as shown in the attachment. Since I am not familar with labview, can somebody please spare me several minutes to convert this program to labview VI. Thank you very much for your kind help.
Baicy
Solved!
Go to Solution.
Attachments:
fft.png ‏18 KB

As I said, images are worthless because they tell no one how you have those functions configured. If you do decide to post the actual code, then you will have to be somewhat lucky in finding someone who has both DASYLab and LabVIEW.
The Express VIs that you will want to look at include the Instrument I/O Assistant, Filter, Spectral Measurements, and Statistics. Probably just need a loop areound the Instrument I/O Assistant if you need to collect x number of points.
Message Edited by Dennis Knutson on 06-12-2010 01:09 PM
Attachments:
Express.png ‏189 KB

URGENT: please help to convert Tektronix TDS754C Labview driver 7.0 to 6.1

Hello,
Could someone please try to convert Labview 7.0 driver to a version 6.1?
I attached Tektronix TDS 754C Labview driver 7.0 below.
Or National Instruments, please provide me with Tektronix TDS754C Labview 6.1 driver.
Thanks to everyone in advance,
Al.
Attachments:
tktds7xx.zip ‏1732 KB

Try this. The error was just because the functions are part of the LabVIEW distribution and had nothing to do with converting the driver.
Attachments:
tktds7xx_61.zip ‏1414 KB

How to convert llb from LabVIEW version 8 to 7.1

Can someone tell how to convert the llb from LabVIEW version 8 to version 7.1?
I hope to sent the program to the others, but the other side are using LabVIEW version 7.1 but not version 8.0.
I know I can save to VI file as previous version, but it contains severals of VI in the library, it is quite time consuming.
Can everyone sugguest any method or solution to solve my problem.
Thanks.

Hi anson,
it will run also in LV7.1 - but you should check those warnings (probably things not/differently supported by LV7.1...) anyway!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Please Convert tktds5xx from LabView 2012 to LabView 2011.

I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip ‏777 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip ‏529 KB

Convert labview 10 to labview 9

Similar Messages

Maybe you are looking for