Convert LabVIEW 2012 to LabVIEW 2011
Hi all,
Can anybody convert the attached zip folder to LV 2011.
Thanks in advance.
Regards,
KM
Attachments:
stereo.zip 284 KB
Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
stereo 2011.zip 197 KB
Similar Messages
-
Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011
Hello,
can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
Thank you very much for your support.
Solved!
Go to Solution.
Attachments:
TCPIP_Nagle_algorithm.zip 63 KBAdditionally I am sorry that I have put my post in LabVIEW and not under Version Conversion
-
Please Convert tktds5xx from LabView 2012 to LabView 2011.
I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip 777 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip 529 KB -
Convert VIs LabVIEW 2012 to LabVIEW 2009
Hi all,
Need help to convert VIs attached below (LabVIEW 2012) to LabVIEW 2009.
Thank you very much
Attachments:
EMG Analysis.vi 1670 KBYou didn't enclude the sub.vis and these issues are usually addressed on the version conversion board (see the floating link at the top on the board) but here is your vi. Broken since it is missing depanancies
Jeff
Attachments:
EMG Analysis.vi 842 KB -
Bind FPGA host reference to type definition in labVIEW 2012 crashes labVIEW
Hi,
I am using FPGA target device 5641R and labview FPGA 2012 with 5640R ver 1.7.
On the configure window of open FPGA VI reference function, choosing the dynmaic mode shows broken arrow when wired to the 5640R configuration VIs (i.e. Configure timebase, Configure ADC default, Configure ADC NCO functions). So i tried the other option which is binding the FPGA host reference to type definition and choose the control from path C:\Program Files\National Instruments\LabVIEW 2012\instr.lib\ni5640R\Configuration\NI-5640R VIs\ni5640R FPGA VI Reference.ctl. But after that when i try to save the VI on which open FPGA VI reference function is placed, labVIEW crashes. I am unable to figure out the reason. Earlier I was working with labVIEW 2011 and it was working fine there. Any suggestions would be highly appretiated.
Please see the attached images for more details.
Thanks
Attachments:
1.png 33 KB
2.png 71 KB
3.png 40 KBCheck out this thread. It looks like someone else ran into a similar issue and made changes that fixed their application.
http://forums.ni.com/t5/IF-RIO/correct-5640r-template-use-recommendation/td-p/1331918
Jeff B.
Applications Engineer
National Instruments -
Convert Instrument drive LabVIEW 2012 to LabVIEW 2009
Hi . now we user Ver. 2009 and we need to use Instrument driver (support at Ver.2012)
How we can do?
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=24352down load file .
Attachments:
espec_climatic_chamber.zip 1121 KB -
Conversion from LabVIEW 2012 to 8.2
Dear All
Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
PVT - Mathscript Node.vi 83 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
PVT - Mathscript Node.vi 90 KB -
Hi,
Will my EV3 Lego mindstorm brick work with LabVIEW 2012 and LabVIEW Lego MindstormNXT 2012? Because when I'm installing LabVIEW module for Lego 2012, it'sprompting me to install LV2012 SP1. I already have LV2012 but NOT SP1.
Regards.NapDynamite wrote:
The system in my lab has no SP1, probably the guy over here never bothered to install that update. Now when I checked those updates to install SP1, the update service is locked for this patch and is asking for renewal of subscription.
My boss, who is not very cognizant of software stuff, is now asking me to use the EV3 software which comes along with LEGO pack becuase he's not ready to spend much to renew.
And my dream of teaching LabVIEW to school kids is now in vain.
Regards.
In vain?
A bit dramatic isn't it?
One license is $99.
Site license is $570.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/210666 -
Hi,
Could anyone convert this labview 2012 driver to labview 2011?
Thank you in advance.
Attachments:
hp4195.zip 263 KBSaved for 2011.
Adam
CLD & CTD
Attachments:
hp4195_2011.zip 177 KB -
Only have LabVIEW 2012. Why am I asked to download LabVIEW 2011 SP1 f2 RTE Patch?
Hello,
I recently got a new machine (clean install of Windows 8), and installed LabVIEW 2012, with no other previous versions. However, when I ran the NI Update Service, it listed "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as a critical update.
I'm confused; did I accidentally install LV 2011 too?
Thanks
Solved!
Go to Solution.Also, some addons use older RunTime Engines. It is not suprising that you need the 2011 RTE patch.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
LabVIEW 2012 LLB for VBAI 2011
Hi
I'm trying to build some labview vi's in LabVIEW 2012, to be compatible with Vision Builder AI 2011. I want to include some shared variables. I have the library file containing a string shared variable and a labview VI with just a string control into the shared variable. This is to read text from the vision build inspection. Both the library and the vi is saved under version 2010 but when I try to make a LLB file, the versions change to 2012 again. Do you have any inpute into why this could be?
Cheers.You need to use the LV project to create a source distribution that includes all the dependencies (including vi.lib). Then close out LV 2012 to make sure you don't accidentally get any cross linking. Open the main VI of your built LLB with LV 2012 and then go to File>>Save for Previous. If there are any licensed VIs from vi.lib included, those may not save for previous, but I think this is what you should try to do.
I'm not sure exactly what you are trying to do, but if you want to use shared variables, VBAI (2010 or later) can update a shared variable with it's results (or read the variable if you want to pass data to VBAI), and then any version of LV can read/write that shared variable because shared variables are not LV version specific so you don't have to have the same version of LV to read/write shared variables. If this is all you want to do, you could just keep your LV code in LV 2012 and read/write the variable that is used by VBAI 2011. You can also use the VBAI API to control the inspection from any version of LV 2010 or higher regardless of the version of VBAI. You can see an example here:
C:\Program Files (x86)\National Instruments\Vision Builder AI XXXX\API Examples\LabVIEW Examples
Let us know if this still does not address your question and provide more details if this doesn't help.
Thanks,
Brad -
File conversion of LabView 2012 to 2011
Hello ,
I am new to Lab View. I am stuck with conversion of this file from LabView 2012 to 2011 .Help is very much appreciated
Thank you ,
With Regards,
Jagadish
Solved!
Go to Solution.
Attachments:
kiran_prob2.vi 7 KBduplicate post
-
Convert 5.1 files to 2012 in Labview
Hello all,
Could someone please convert the attached file's that are in labview 5.1 into a file's that I can open in labview 2012.
Thank you in advance for the help.
Cheers,
Rich
Solved!
Go to Solution.
Attachments:
Dynamic Vave Train Testing (Filter).zip 78 KB
Valve Train Durability Testing_mag (Filter)2.zip 52 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
AI.LLB 682 KB
CUSTOM.LLB 369 KB -
Please Convert Vis from Labview 2013 to Labview 2011
Please convert the attached Vis from Labview 2013 to Labview 2011
Solved!
Go to Solution.
Attachments:
Convert from2013 to 2011.zip 255 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Converted to 2011.zip 176 KB -
LabView 2012 Security System Main vi's have error 200559
The vi's give errors of 200559 in my LabView 2012 and NI application engineer "John Staskal" told me as "Another good step
is to recreate the VI in your current version of LabVIEW so that you know the error is not caused by upgrading the VI to a newer version of LabVIEW." I did all that, but not resolved.
Their application engineer John Staskal also told me as "In addition to working to resolve the error you may want to pursue is posting on our upgrade forum and asking the community to convert the VI to a current
version of LabVIEW. http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion".
I did all trouble shooting steps such as highlight execution, probes, etc as what their application engineer told me and still having error of 200559 in LabView 2012.
I appreciate help from any one.
Ali Tariq Bhatti
Ali Tariq Bhatti
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
NI ELVIS II Security System VIs (2).zip 313 KB
Error 200559.docx 500 KBRavensFan,
I) Yes, I open up the front panel of the Express VI's and probe into them.
2) I use the express vi's, but if you see my attached vi's file. You will see Security System Main vi is the main vi where the program is running and where I am getting the error of 200559.
3) I also attached the word document file, so I am getting error of 200559 in probes 3, 4, and 5 using Export Key Press and Voltage vi's in this post.
4)Do you know, how to convert these my attached vi's to 2011, 2010, 2009, or LabVIEW8.5 version. May be, it fix the problem, or if you know some one to get help from or get chance to use ELVIS II board, so let me know .Your help or any one's help is appreciated.
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
did probes for Export Press and Key vi's file.docx 340 KB
Maybe you are looking for
-
Error message "unable to acesses IXP213.tmp" when installing itunes
I have windows XP and whenever i try to upgrade, install or uninstall itunes i get teh error message, "Unable to accesses file C:\DOCUME~1\user\LOCALS~1\Temp\IXP213.TMP\ please confirm that registry exists or select an alternate route." I've tried al
-
WSAD issue with unresolved types...
Hi, I'm new to servlets and WS is sayng that it doesn't understand "response" i.e. response.setContentType("text/html");. Do I need to import more than the usual things, or is it something in the build path that needs to be changed? Here are the clas
-
SQL Data Modeler - Startup Problem
Hi I've created a Relational Model with Oracle SQL Developer Data Modeler, with a few tables, and everything was working ok. Yesterday I made some changes to the model, added columns and another table, saved the model and closed the Data Modeler. Tod
-
Cannot resize or move a placed image
I am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6. Thoughts?
-
ITunes sounds scratchy and slow
When I play songs in iTunes, they sound scratchy and have pops in them. At about 8-10 seconds in, it really slows down for a second or two and then seems to free up a bit, but not without the scratching and pops. I have iTunes 7.0.1.8 running on Wind