Convert Labview 5.1 library to 2010

Hi,
Could anybody help me out to convert this library into a 2010 version?
Thank you very much in advanced.
Best regards,
danidpr
Solved!
Go to Solution.
Attachments:
WK4265.llb ‏185 KB

attached as 8.2, which youc an open
Attachments:
WK4265.llb ‏125 KB

Similar Messages

NI-LabVIEW run-time engine interop 2010 failed to install

Hi,
While installing Labview 2010 (32 bit) I got an error message:
NI-LabVIEW run-time engine interop 2010 installation has failed with the following error:
Error 1935. .... (see the .ppt for screenshot if interested)... HRESULT 0x8002802F
I googled HRESULT 0x8002802F and found a page that said that this error is usually b/c of a missing/corrupt entry in the registry: file %windir%\system32\mscoree.dll, and that "repairing the highest version of the .NET Framework on the system will correct any problems resulting from this error."
I have verified that mscoree.dll is not present, and I don't have the .NET Framework installed on my system. SO, I have the following questions:
1) do you concur with the advice given on the page referenced re: the reason for the error;
2) If so, should I install .NET Framework, and what do I then need to do in LabVIEW to tell it that the .dll is now present?
3) If your opinion is other, what do you advise?
Cheers
Attachments:
Labview Installation error.ppt ‏227 KB

Hi Luke,
After doing some research, there are two possible solutions.
1) According to a KB, it could be your antivirus. You may want to try to turn off any spyware blocking software such as Ad-Aware, Norton, etc and try the installation again.
2) Another customer had the same error, and they got it working by installing .NET 3.5 from Microsoft's website and then installing LabVIEW again.
Hope one of those options work for you!

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

Please try with latest version of MS Word and Acrobat.
Regards,
Anoop

Is it possible to convert LabView data into OLE variant?

Hi. I'm using Activex Data Objects (ADO) to communicate with MySQL. Some ActiveX methods give OLE variant output, with "Variant Type" like "VT_ARRAY|VT_UI1", "VT_UI1" or "VT_BSTR". With some deduction and trial and error is relatively simple to extract data from this OLE variants and convert them to LabView data types. The problem is when I try to input variant data to some ActiveX methods, it almost always give me errors, I suppose because it expects the same type of the outputs, this is: OLE variants. Now, the question is: ¿Is there any way to convert LabView data into OLE variant data? ¿How?
I've been searching and found a lot of posts about problems when passing variant data into ActiveX, saying that sometimes SAFEARRAYs are needed, sometimes saying that there were some bugs in LV6, giving some workarounds to this bug and saying that it is fixed in LV7.1, but the supposed workarounds don't work and the bug is still present in LV7.1, if it is really a bug.
I think that if I could put LV data into OLE variant shape I may find an answer and solution to this matter.
Thank you
Daniel R.
UdeC - Chile

Below I describe how to handle OLE Variants, but I wanted to mention that LabVIEW does have a Database Connectivity toolkit (http://sine.ni.com/nips/cds/view/p/lang/en/nid/6429) that has already created a set of VIs for ADO. You might check that out first.
However, handling OLE Variants in LabVIEW is automatic. LabVIEW itself has a variant datatype. When you use the ActiveX property or invoke nodes and one of the parameters is an OLE Variant, it is automatically converted to a LV Variant. You can then use the LV Variant VIs (such as "Variant to Data" and "To Variant").
Brian Tyler
http://detritus.blogs.com/lycangeek

Can Aperture 3 upgrade read/convert v1.5.6 library?

In the process of migrating apps/files from G5 to Mac Pro. Unfortunately, my trusty version of Aperture 1.5.6 will not run on the Mac Pro forcing me to upgrade to v3. I have the original Aperture library and two backups, my question is when I go to install the Aperture 3 upgrade and tell it to read/convert the existing Aperture library will it be able to? Thanks.

I think it should and will. My advice to you would be to copy the Ap Library to a separate drive in your Mac Pro with lots and lots of free space. Then control-click on that (or open A3 and use File/Open), and choose A3 to open it, and be prepared to wait for several hours, depending upon the size of your library.
Btw, I use Managed files, but have my Aperture Library on a separate hard drive at all times. Seemed the thing to do, taking a cue from Final Cut where you are always advised to have your video assets on a different drive from the boot drive.
Ernie

How to convert LabVIEW 2.2 for Mac to PC

Need to convert labview software from MAC to PC.
Moved files from mac to pc. No files with .vi extension. several resource.frk files in sub directories. Is there any instructions for conversion or is this not possible?

I've heard of people doing this before. It's been a couple of years but the process involved going from LV 2 to 3 on the MAC. Then from 3 MAC to 3 LV. Then use the LabVIEW converion kit. You may be able to bypass the 2 to 3 on MAC step.
From my understanding you can open LV 4 and onwards VIs with LV 6. Here's a Knowledgebase entry you might find useful:
http://digital.ni.com/public.nsf/websearch/6f80a168949d5799862569310076f14b?OpenDocument
Another KB entry discusses how to move files between the PC and MAC:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5b64515b3246bd8b862565210079a8dd?OpenDocument
Best of luck,
Kamran

Please convert Labview 2011 file to Labview 7.0

Please convert Labview 2011 file to Labview 7.0. Thanks alot!
Attachments:
FreqResponse.vi ‏104 KB

attached
You will need to replace the front-panel graph. Downconversion sometimes corrupts graphs.
Attachments:
FreqResponse.vi ‏299 KB

Convert a Mac iTunes library to a Windows iTunes library?

This sounds like heresy, but I've switched my home system from a ten year old Mac Powerbook, to a screamingly fast, new Dell laptop. I have a large iTunes library on the old Mac; s there a way I can convert my Mac iTunes Library into a Windows iTunes Library, or do I have to (gasp) rebuild the whole thing in Windows?

Hello autochthon,
Thanks for using Apple Support Communities.
To transfer your iTunes library to another computer just follow the steps in the article below.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Take care,
Alex H.

Convert labview file 2010 to 2009

Hi,
Can anyone convert the file from labview 2010 version to labview 2009.
File attached as attachment.
Thanks in advance
Owen
Solved!
Go to Solution.
Attachments:
LAPP.vi ‏37 KB

For future reference, there is the Conversion Board for this kind of thing.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
LAPP.vi ‏96 KB

I want to convert labview 4.2 to labview 2010

hello, I need immediately help..
I have examples. they created by Labview 4.2. I'm using Labview 2010. How can I open that examples?

Hello,
You have a dedicated thread where you can put your VIs and ask for conversion:
http://forums.ni.com/t5/LabVIEW/Upconvert-VI-Requests/td-p/1067230
Most of the VIs can be converted to version 8.2.1 and then from 8.2.1 to more recent versions.
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

Convert labview date/time to excel date/time

How do I convert the "seconds since 1904" from the function "Get Date/Time in Seconds" to an MS Excel date/time format? The application runs in the Solaris environment.

hi, I am not sure about Solaris env.
Maybe this will help in one way or another.
Regards
ian.f
Sg/My
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
GetDatenTime_to_File.vi ‏48 KB

How to convert Labview document into PDF format

Hi! can any one tell me, can we convert the Labview document (Labview saved files)into PDF format. I wanted to convert it using a VI. If any one suggest me or send me the example vi i will be very thankful.
Regards
Ramesh.C

Hi,
We have a brand new PDF library for LabVIEW. Release date is in october. The library can create pdfs, with all kinds of text writing and picture stuff. It works stand alone, so there is no need for other programs. It should also be platform independend.
If your interested, drop me a mail. I can send you mail when it's released. Maybe we can give you a "beta test", if you send use your findings.
Regards,
Wiebe. (email is " my name " @ carya . nl )
"Ramme" <[email protected]> wrote in message news:[email protected]..
Hi! can any one tell me, can we convert the Labview document (Labview saved files)into PDF format. I wanted to convert it using a VI. If any one suggest me or send me the example vi i will be very thankful. RegardsRamesh.C

How to convert Labview file 10.0 to 7.1

Hi I was wondering if anyone could tell me how to convert my 10.0 vi file to a 7.1 vi file. Thank you very much.
By the way, it's from a student version if that matters at all.
-Brian

You would need to have version 8 of LabVIEW along with version 2010 or 2011. Open the 10.0 file in LV10 or later, saveas LV version 8.
Open the LV8 version in LV8 and the save for previous version as 7.1
If you don't have those versions, then that is what this message board is for. Read Conversion Board Rules! and attach your VI to your message.

Ayuda convertir labview 5.0 a 8.5

necesito que me ayuden a convertir mis archivos de labview 5.0 a 8.5 gracias de antemano
i need to convert from labview 5.0 to 8.5 labview version, i need your help thanks so much!!
Attachments:
Send to Pic 16f84.VI ‏66 KB
serialout1.0.llb ‏199 KB

Attached as 8.2. I did not include the library, since that library contains VIs that are part of <vi.lib>. VIs from <vi.lib> should never be converted. When you open the VI it will relink to the library that ships with LabVIEW.
Attachments:
Send to Pic 16f84.VI ‏23 KB

Convert labview 5 llb to 8.6

Could someone please convert this library (apparently from Labview 5) into a format compatible with Labview 8.6? Also, if it is possible to download labview version 8.2 (so I can do these conversions myself without bothering anyone) that would be great too. I've tried accessing some links but get am denied access. From reading prior posts, this is not uncommon.
Many thanks for any help you can provide!
Solved!
Go to Solution.
Attachments:
NetCDF_LV_5_0_x.llb ‏712 KB

Hi Samoth,
here you go (LV7.1, missing dll...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
VLabLib.llb ‏348 KB
VLabSample.llb ‏79 KB

Convert Labview 5.1 library to 2010

Similar Messages

Maybe you are looking for