Convert measure dimension to flat measure option not found

Hi All,
I am integrating Essbasse with BI. In the physical layer, I tried to convert measure dimension to flat measures. But when I right clicked my Essbase cube I am unable to find the
convert measure dimension to flat measures option . My BI machine version is 11.1.1.6 .Kindly guide me to overcome this issue.
Thanks and Regards
Sai

Sai, you first have to make sure that the properties of ONE of your dimensions is set to be a measures dimension. Then this option will show up upon right clicking.

Similar Messages

In nokia C7 integrated GPS option not found in pos...

In nokia C7 integrated GPS option not found in positioning method
Attachments:
Scr000001.jpg ‏14 KB

@shajjeel
AFAIK this would only occur in device originally destined for sale in Syria.
Happy to have helped forum with a Support Ratio = 42.5

Personal Hotspot option not found on my iPhone 4S Using airtel?

Personal Hotspot option not found on my iPhone 4S Using airtel connection. Do any one wat may be the reason?

I had the same issue
Go to Settings / Cellular / Cellular Data Network, scroll down and you will see PERSONAL HOTSPOT.
For APN I used 'internet'.
The password came in automatically
All was restored then

Enroll Device option not found

HI,
I have enrolled devices successfully before. Now when I open company portal I cant see the Enroll device option in the page only all apps and My devices are dispalyed and no Enroll Device option is found
Please help me

Hi Jon,
This information is correct, but now we are not able anymore to use SCCM 2012 to connect to Intune!
"Acces denied: You cannot use the configuration manager console to manage mobile devices for this subscription because the mobile device management authority has been permanently set to Windows Intune. Select a different Windows Intune subscription."
How can we solve this so that we can use SCCM 2012R2?

Startup items options not found under user name

I'm sure this has been covered before, but I couldn't find an exact match.
Under the accounts setup-one of the profiles does not have "Login Items" as an option, only has Password, Picture, and Parental Controls. I have full access as administrator to all accounts. How do I get the Login Items Options to show up?
On a larger issue, the reason I would like to access the user account login items is to turn on DirectfonfigX for that login, the particular login will not work with a DVI connection. (Display may be set to VGA, I don't recall the exact reason why it does not work with the same DVI connection as normal login user. they are basically the same user profiles, but I can access some software under one user that the other user will not recognize that I have registered my software, or profile settings. But perhaps that is an even larger issue.)

Sam,
Just ran a test here--Login Items are only available for the currently logged in account (owner of the keyboard/mouse/display). You'll have to log in as each of those users and set the login items appropriately. Seems that an admin should be able to set these but not so.

IPCC extension option not found under End user on CUCM

Hi
I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
Thanks

Hi
+5 for MR/Chris
1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
admin:run sql select paramname,paramvalue from processconfig
where paramname like '%nstalled%'
Thanks
Please rate all useful information

Safari 5.0 - Disable local file restrictions Option not found under Develop Menu

Hi All,
My system specs are as follows :
Platform : Linux
OS : lubuntu
OS Version : 13.10 Saucy Salamander
Browser : Safari 5.0
I need to open a html file in Safari before which I need to enable this option - "Disable local file restrictions" under Develop menu as available in Safari 7.0 for OS X Marvericks.
Problem here is I am not able to find this option in Safari 5.0, also I am not able to find any way to upgrade Safari in Linux.
Please suggest how can I activate this.

Safari->Preferences->Advance->on the bottom. To get the Debug menu which includes a listing of Keyboard & Mouse Shortcuts, among other useful things, run this in the Terminal app and quit & relaunch Safari:
*defaults write com.apple.Safari IncludeInternalDebugMenu 1*

Tablespace Option not found under Storage Menu (OEM 12c Express)

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

RB_Split option not found for message split

Hi all,
We're configuring to split a single XML with multiple records into multiple single record XML files.
We have referenced the blog:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but, during interface determination config, we cannot find the options for RB_Classic & RB_Split.
We're on SPS17 already...are we missing a patch of some sort?
Thanks!
Steve

Hi Bhavesh,
OK! I forgot to modify the 0...Unbound option in interface mapping. So that solves the first part.
Now, I'm simplifying my test to use 1 XML with 2 records and attempt to generate 2 single record XMLs. I'm still only getting 1 output single record XML only.
My input XML looks like:
<ns0:MultiXML xmlns:ns0="urn:himax:b2bi:poc:multiMapTest">
   <Record>
      <ID>1</ID>
      <FirstName>Steve</FirstName>
      <LastName>Chen</LastName>
   </Record>
   <Record>
      <ID>2</ID>
      <FirstName>Sunny</FirstName>
      <LastName>Huang</LastName>
   </Record>
</ns0:MultiXML>
and desired output is:
<ns0:SingleXML>
   <Record>
      <ID>1</ID>
      <FirstName>Steve</FirstName>
      <LastName>Chen</LastName>
   </Record>
</ns0:MultiXML>
... generate as many files as the original # of records.
For mapping, I have:
<MultiXML> 1..1              <SingleXML> 0..unbounded (no mapping)
<Record> 1..unbounded   <--->   <Record> 1..1
    <ID> 1..1             <--->     <ID> 1..1
etc. etc.
Is it something to do with my occurence settings?
Thanks!!!
Steve

Javah -stubs option not found

Hi!
I am using jdk1.5 (update JDK-5.0-update-9) and I am trying to learn about JNI. After creating a header file using command
javah -jni Hello
at most of the places the next step is to create stubs using
javah -stubs
An error occurs indicating that jni doesn't require stubs.
Moreover, at many places I read that for C code, a ".h" and ".c" file will be created, where as for me only a ".h" file is created and I need to write the ".c" file.
Can anyone explain these things to me.
thanks,

Hi Jon,
This information is correct, but now we are not able anymore to use SCCM 2012 to connect to Intune!
"Acces denied: You cannot use the configuration manager console to manage mobile devices for this subscription because the mobile device management authority has been permanently set to Windows Intune. Select a different Windows Intune subscription."
How can we solve this so that we can use SCCM 2012R2?

Delete option not found in newsexplorer page.

hey all..
I have copied the standard newsexplorer layout set and created a new one for my portal. Even though I have edit_xml_forms and delete commands in newsgroup which is in news resource renderer, I cant see delete option when I login into the portal. I can see only edit option. Plz suggest me with a solution.
Regards,
PP.

hey i have resolved this issue by changing the delete command in newsgroup for news resource renderer to delete_session. Now I can see the delete option on my portal.

Unit of measure JHR not defined

Hi Friends,
What can cause this problem. I am getting this error message
"Unit of measure JHR not defined" after I am creating a Shopping card in EBP.
JHR is existing on both sides Backend and EBP in the table T006.
Regards
Marco M.

COM_PRODUCT_UNIT
you need to debug this program . JHR is not SAP or international UOM . it could be customised one
COM_PRODUCT_UNIT_READ_API
Is a unit of the product convertable into i_unit?
    CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
      EXPORTING
        meinh                       = iv_unit
      EXCEPTIONS
        dimension_not_dimensionless = 1
        t006d_entry_missing         = 2
        t006_entry_missing          = 3
        OTHERS                      = 4.
    CASE sy-subrc.
      WHEN 0.
        MESSAGE e020(com_product_unit) "unit is dimensionless
               WITH iv_unit
               RAISING unit_not_allowed.
      l_lines = l_lines + 1.
        CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
   CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
          WHEN 2.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                    RAISING overflow.
E        COM_PRODUCT_UNIT       020     Unit of measure & is not defined for product
When do you get this error ? while ordering Internal goods and services or describe procurement?
or while procure from catalog.

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

Views and Base unit of Measure is not coming in Chines Lang

HI All
Plz Help me.
I log-In Chines Server, during MM01 the views are coming in English language instead of chines.
and during PO creation The Base unit of Measure is not Coming in Chines Language it is displaying Some number??
I have maintained Source and taget lag in CUnI..but still Im getting this problem..
How to solve this plz help..
Thanks and regards
Ramesh reddy

Hi
Please maintain the translation in the Following Configuration
Logistics - General->Material Master->Configuring the Material Master->Define Structure of Data Screens for Each Screen Sequence
Select the Specific Screen Sequence & Maintain the languages
Similarly please maintain the Translations in the Transaction CUNI for the Base UOM in respective languages
I hope currently in your system only Language EN is maintained
Thanks
Madhav

Convert measure dimension to flat measure option not found

Similar Messages

Maybe you are looking for