Convert mp3 to 5.1 surround sound?

i have a xfi and im attempting to convert a mp3 to 5.1 surround sound. When i got to do it, it says failure file conversion not supported. Am i doing something wrong or can it not be done? it only lets me convert mp3s to 2 channel.

http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=2563
For to get mp3 saved as multichannel audio, you need to record while playing the mp3 file using Creative Media Source (play mp3 file w/ another software, on Media Source set the recording format to "WAV multichannel" and recording source to "What U Hear". You also need to set the CMSS 3D by the instructions behind the above link).
jutapa

Similar Messages

DTS & 5.1 Surround Sound using my Home AV Receiver and X

Hello, new to the boards and computers (buying @ least). Let me start with my Desktop, followed by the sound card and my home AV Recei'ver. BTW, all drivers are current and up to date.
HP m820n
Processor
Intel Viiv Processor Intel Core2 Quad Processor Q6600 (2.4GHz)
Operating system
Genuine Windows Vista Home Premium
Creative Sound Blaster X-Fi Platinum Fatalty w/ I/O Dri've
AV RECEIVER
Yamaha HTR-5730 5. w/ DTS and Dobly Pro Logic II.
Connection between the two:
Digital Coax Cable from X-Fi I/O SPDIF Out to AV Reciever CD Coax Digital Input.
At first there wasn't any sounds coming from my receiver using the current connection (see above). However, I was able to change an input to digital PCM (pulse code modulation) on my AV Recei'ver and all of the sudden, I'm listening to mp3 & wma files in surround sound (all 6 speakers).
I thought that the problem was solved. Well then today I discovered it changed to stereo only, and as long as the digital input cable was hooked in back of the receiver, I couldn't change the setting from "stereo, PCM" to DSP, DTS or DoblyII. Solution? buy the Home Theater cable set or external decoder.
Next Problem, for some reason when I change the X-Fi settings to 5. ( or 2.0) and set up a "test" (whether creat.labs or Window's Media Center)there's no sound coming from any channel/speakers. HOWEVER, my AV Recei'ver will even change the setting from "Stereo" to "5." on the test automatically....but still, there's no sound??
So.... I ignored it and figured to grab my Led Zeppelin Double Disc DVD that's Dobly Digital and DTS 5. Sorround sound. After messing w/ the default & SPDIF by-pass settings and inserting the DVD, I can only listen to it in Stereo (left and right PCM). BTW, changed audio selection in menu on DVD too.
What gives? What's digital even good for on these things since the only solutions are to ether decode or switch to analog. Also, sorry that this is so long and possibly parts don't make sense but I'm extremely tired (2:45 am Central).
Thanks,
Chris

To the Top...
Also, an update. Using my TV Tuner card, I was able to watch tonights football game in HD which is Dobly 5. Surround sound. Sure enough, the AV Recei'ver kicked into Dobly Digital right away. Now I just need to figure out how to configure DTS and Dobly using my DVD's and possibly buying software that converts music files into surround sound.
Chris

How do I convert analogue 5.1 surround sound into a digital signal? (Pioneer SE-DIR800C headphon

I understand that my SB Audigy 2 card will only output 5. sound from games through its 3 analogue connectors. How do I convert this analogue signal into a digital one? What hardware do I need to purchase?
I have read the thread on "Digital Connections, SPDIF and Dolby Digital Info", and also I've thoroughly read the "Creative Speaker Connectivity Guide".
The reason I ask is that I have just bought a pair of Pioneer SE-DIR800C Surround Sound headphones. This are supposedly fantastic for recreating surround sound on headphones because there is a clever little decoder box. They accept a DTS / Dolby Digital signal via the digital co-axial and optical inputs, and there is a single analogue input which only accepts stereo sound.
My XBox and PS2 will output true digital 5. sound via an optical cable and I am confident this will work perfectly with these headphones. I'm really looking forward to playing Halo in surround sound! But for gaming on my PC, I'll be limited to just an analogue stereo signal. Well, unless I can find some device that will convert my SoundBlaster's analogue 5. outputs into a digital signal, which I can then plug into the little decoder box for these headphones.
So, back to my question:
What hardware do I need to buy to convert an analogue 5. signal (via 6 x RCA or 3 x 3.5mm stereo ) into a true digital signal (via optical or co-axial SP/DIF)? Is it some type of headphone amplifier I need? If possible, please recommend makes & models of equipment.

Thanks stefan
OK, basically I have found 3 options for getting digital 5. out of a PC:
a) Creative DTS-60 (approx $90). This converts the SB's analogue into digital, but it's not available in the UK and it also introduces a noticeable 50ms sound delay. Also, who wants an extra box hanging out of their PC?
b) Buy a new sound card which has Dolby Digital Li've output. For example, ) BlueGears HDA X Mystique 7., or 2) Turtle Beach Montego DDL, or 3) Terratec Aureon 7. PCI (NOT the Space, FireWire or Uni'verse cards). I couldn't find the first two available in the UK so I have just ordered the Terratec card from Komplett.
c) Buy a new motherboard that has built-in Dolby Digital Li've output, for example the ABIT Fatalty AA8XE. Unfortunately my PC is only just over year old and I'm not quite ready to replace it.
I hope this info is useful for people. Maybe Creative will start making a card with DDL output too.Message Edited by NinjaHeretic on 2-22-2005 08:46 AM

Using ATV2/3 with non-HDMI Receiver and theater projector and also need iTunes downloaded movies to work. I'm thinking to use the Toslink digital out for surround sound and an HDMI to RGB converter for video but not sure the iTunes DRM will prevent?

I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
Thanks

I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
Thanks

Surround sound with Venturer 5.1 surround system with converter jack?

Hi, i need help.. I have a sound blaster x-fi extreme sound card and i can't seem to get surround sound out of it. i have a surround system that outputs two rca jacks (red for right and white for left) and i have a jack similar to this?to convert it to a 3.5mm jack to plug into my sound card. when i plug it in, it doesn't recognize the surround sound and it doesn't play on the back two speakers.

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Pseudo Surround Sound on iTunes?

ok, I have a logitech 5.1 speaker system connected to my macbook. When I play songs it just comes out of the front two speakers and the center speaker. I want to know how or if i can get the music to come out of the back two speakers with out buying some other product. I know that files in .ac3 format can play surround sound but i don't think it is possible to convert an MP3 to an AC-3. Please let me know if have any solution to my problem i have been trying for hours to figure out if its possible. THANKS

I am having the same problem - i have a creative Soundblaster XFi Titanium Sound card and every game i have works brilliantly with it as well as Windows Media Center and but iTunes screws up and gives me no sound at all if i choose souround option in the video audio track selector. I know my videos i brought on itunes have 5.1 because i have been playing them through my apple TV to get the surround and it works fine. so it is not a problem with the computer, the soundcard, the OS (although it is 64 bit) or the file but with iTunes or Quicktime. I have gone into the control panel>Quicktime and chosen the correct suround settings (direct sound, 24bit(the same as my card accepts), 44.1 (once again the soundcard spec), safe mode off(tried having this on - did not work either), 5.1 suround) but this only happens when i select suround, when i play stereo and use the sound card to fill it has no problem (except that is not surround sound for movies).

Surround sound audio card

What card do I need to run Logitech X540 systen. Has 3 wires. What about hooking up a turntable with RCA jacks? Anybody converting vinyl to Mp3's or other?

Hi-
Welcome to Discussions!
What card do I need to run Logitech X540 systen
Included with the speakers is a two-channel RCA-to-3.5mm jack. The speakers are designed to emulate surround sound 5.1 from a 2 channel source. The 3.5mm jack is connected to your audio out on the back of the tower.
What about hooking up a turntable with RCA jacks?
iMic
Anybody converting vinyl to Mp3's or other?
I prefer Audacity over Final Vinyl.
Use either with the turntable connected through the iMic.

Mega 180 and surround sound

I've spent the last week goofing around with surround sound, SPDIF in & out, and lots of other audio type stuff. I haven't seen much discussion in the forum about high quality audio. So I thought I'd describe my experiences.
I've been using my mega for about a month with 2 channel stereo. I have pretty much all the video stuff and MCE 2005 working reasonably well so I decided it was time to tackle 5.1. The onboard sound support works just great for producing 5.1 stereo. Hooking this up to a set of 5.1 computer speakers is straight forward and works just fine. If that is all you want it's very easy.
However I wanted more control of the audio sources in my living room and decided to go the external digital receiver route. So enter SPDIF which I have had no experience with. SPDIF is the same as TOSLINK. When you go to the store looking for connectors I could find no mention of SPDIF. But lots of TOSLINK's - they work just fine. The mega 180 has both input and output SPDIF connectors. The input worked just fine with a DVD player I have. Howver I never could get it to produce anything but ticking noises with my HDTV tuners SPDIF connector. This same HDTV tuner SPDIF connector worked just fine when I went out and bought a reasonably priced ($250) JVC digital receiver. So I guess I didn't have the proper decoders configured in the Mega??
SPDIF is used to support digital dolby and several variants...like dts. It is not just a digital connector. The Mega 180 is very capable in this department however. It supports DVD passthru to SPDIF. It also supports realtime digital dolby encoding of all audio.
You can specify that you want 5.1 digitial dolby out the digital connector. All sound is converted to digital dolby real time and sent over this connector. I was not expecting this. You can also use the 6 analog channel option (speaker out, line in, mic) to attach to a receiver. This is analog output however so you just want the receiver to pass the signals straight thru to the 5.1 speaker configuration. There is a 3rd way to attach the Mega to the digital receiver. You can send 2 channel analog output via speaker out. The digital receiver will then convert this to surround sound using various environmental settings.
At this point I have my surround sound system set up. I tend to like the digital dolby passthru for listening to DVDs. For MP3's I like the 5.1 stereo using the 6 analog outputs. For other videos....like avi files I like the digital dolby realtime conversion out the SPDIF connection.
It is kind of rare to give kudos to MSI on the Mega series. They have done lots of things wrong. However they have done a surprisingly good job of supporting quality audio options.
At least after a week of goofing around I'm happy!

thank nvidia, not MSI! their on-board audio solutions have always been rated quite highly, especially the hardware SoundStorm APU. i used to swear by creative many moons ago, but when onboard audio is as highly spec'd as nvidia's why bother?

Is it even possible to edit surround sound on a Mac Pro?!?!?!

Hello,
I've just been reading this thread:
http://discussions.apple.com/thread.jspa?messageID=2924869?
Which among many things discusses the fact that Mac Pros, even through an optical cable, are not capable of exporting live 5.1 audio - they can only playback already encoded 5.1 dolby audio from DVD's for example. Apparently the optical out is a purely stereo affair otherwise. I've finally received my Logitech 5450 speakers (took weeks and weeks) and hooked them up. They can indeed playback 5.1 from a DVD, which is splendid. However, one of the things I was most looking forward to was working on surround mixes in Soundtrack Pro. However, firstly STP doesn't want to convert stereo files into surround (like the video online showed), but only means that the surround panner pans between the two front speakers. (I know there's another thread about that, but the proposed solution of adjusting the collapse slider does nothing).
Secondly, and perhaps more confusingly, if I load an actual 5.1 file from the STP content, it still doesn't play in proper surround - the centre speaker kind of works and I think something's rumbling through the subwoofer, but both of the left speakers and right speakers are 'compressed' into the front one alone - nothing comes out of the rear speakers (they are perfectly connected I assure you!). In other words, f I move the puck in the surround panner so it's solely on the front right, and then over to the rear right, it's exactly the same (coming out the front).
I'm sure there must be a solution. Why would Apple advertise the ease with which one can now mix surround if the Mac Pro (I'm not exactly talking about a mac mini here) cannot export live 5.1?
Something which I'm sure is related, but which I can't solve, is that if I go into Audio MIDI setup in Utilities, and try and 'Configure Speakers', only two channels are recognised, and it won't let me select any of the multichannel options (such as 5.1, which is greyed out.)
Anyone know what I'm going on about? I'm totally lost - not really an audio person in general, but hoping to enrich my short films with some surround magic.
Any help greatly appreciated!
Steve
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

Typically 5.1 is mixed, and monitored on a 5.1 monitoring system, which means you need an audio interface and setup capable of outputting six channels of audio.
So of course the Mac Pro is capable, but not without additional multi-channel playback and monitoring hardware.
Encoded surround sound, which you hear on playback from things like a DVD, is entirely different story and the encoding is done at the end of the mixing/mastering process. Sometimes you will encode a mix in a variety of formats, Dolby Pro Logic, DTS etc.

Guide : Getting 5.1 surround sound. Audigy 2

Hi all
I thought I would write up a really quick but effecti've and simple guide for owners of the Audigy2 ZS and seeing how its Xmas time, I can assume a few lucky boys and girls may have this awesome card under the tree.
Most of whats covered should work with all creative products.
(Sorry, but I WILL NOT cover any info regarding encoding media or the like that will conflict with copyright laws)
This guide is for setting up your Creative Audigy 2 ZS for surround sound 5. reproduction and information in regards to required Filters/Codecs. I have not included any advanced set up options or the like as the ZS with the set ups I have incluced here will cover it out of the box.
One of the most common issues people may have with 5. not fuctioning correctly while playing a DVD movie ( Mpeg ) or any multi channel media that is 5. encoded, has to do with Codecs/Filters.
Most media players will not decode all AC3filters/Mpeg, thus require extra filters/codecs/plugins to be installed.
Ok , the first thing to do is ensure your sound card and speakers are set up correctly.
Most common speaker sets have 3 plugs that go in the back of your card .
EG, Logitech X-530. Pink = Front Centre.Black = Rear left and right. Green = Front left and right.
Ensure they are in the correct place and are tightly fitted.Ensure your sound card is secure and tightly in place.Make sure your speaker cables are tidy and not a big tangled mess.
Ensure in device audio controls that SPDIF passthrough is NOT ticked as this is for optical output ( the ZS pro with rack fuction )
Update to the latest drivers an media source ap
ps.
A few little things to set up first in Creative Mixer Control Panel to ensure cleaner sound:
Lower Master and Wav volume in Creative mixer to about 90% as to avoid any over dri've disstortion.Lower Master Bass Volume to about 90% to avoid over powering the bass.Ensure that your speaker settings Windows control panel and Creative speaker settings match your speaker set up..
Also run the THX Speaker Callibration test in basic mode.
YOU SHOULD DISSABLE CMSS IN EAX CP IN ORDER TO GET 5. TO FUCTION AS IT SHOULD.
CMSS is to be use only for a MONO or STEREO source/signal. It is for sending the stereo/mono signal ( left and right) to all speakers. This is not 5., mearly it is the same signal sent to all speakers to give you a more rich and vivid sound reproduction of an other wise flat source.
Turn off any EAX FX.
Things you want to do to ensure stable use:
SHUT DOWN CTHELPER:
A background task that is a plug-in manager for Creative drivers. A 3rd party manufacturer can use the CTHELPER plug-in interface to produce drivers, add-on features, and fixes that will integrate with a tighter fit with Creative?s sound drivers and utilities. Gi'ven its purpose CTHELPER would normally be classified as a "leave alone" background task. It also allows Creative speaker setup to be synchronized with Windows Control Panel speaker setting. Without it running that check box in Creative speaker setting is not functional (settings are not in sync). Unfortunately there are often problems with CTHELPER, most notably that it can use 00% of CPU time so it's best left disabled unless you REALLY need it .
Type in run "msconfig" and shut down all Creative Start up entries. Infact its proberly best to shut everything down.
NOTE: Any essentinal Software for the proper fuction of devices ,Eg: Razer mouse utils should be left on.
Simple Bios settings to help improve audio and stablity:
Dissable Pallette Snoop.ANY AND ALL shadows for devices, EG VGA BIOS and system bios should be dissabled. If you have the setting for PCI latency in your bios ( AGP boards only ) set it to 64, if its already at 64 try 32 .
Shut down ( remove, reconmended ) any 3rd party tweak apps that run in the background.
EG, Cache Man and any monitoring software.
Ok, now for Filters/Codecs and Plugins.
A major required Filter is AC3. (ac3filter__0a_rc5)
AC3Filter - it is DirectShow filter for AC3 decoding to play AVI with AC3 audio tracks and MPEG2 (DVD). Required for WMP.
NOTE: If you have DVD software that should play encoded 5. then make sure you have any updates/patches for the player installed and go through the tools/options for the player and ensure its setup correctly to decode AC3filters in the applictions tools menu.
If you use Cyberlink Power DVD you may need to pay an extra fee to get the required AC3filter/MPEG2 decoders to fuction as all 5. sound settings may be greyed out on some dated versions.
InterVideo WIN DVD ( this software suit comes with most "Asus" if not all makes of Mainboards. This suit comes complete with the required codecs/filters so get full surrport for 5. - 6. - 7. out of the box. Note: you must set it up first under audio options as it defualts to 2..
If you use WMP0 you should download and install the AC3filter or get the latest XP codec/filters packs. With out these filters you may not get 5. sound and/or poor reproduction.
Supported file types:
The following table lists the file types (formats) supported by Windows Media Player .(For files type played by Power DVD or WIN DVD please refer to the makers website or read me file for a detailed list).
File type (format) File name extension .
Music CD Playback (CD audio) .cda Audio Interchange File Format (AIFF) .aif, .aifc, and .aiff Windows Media audio and video files .asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx Windows audio and video files .avi and .wav Windows Media Player skins .wmz Moving Picture Experts Group (MPEG) .mpeg, .mpg, .mv, .mp2, .mpa, .mpe, .mp2v*, and .mpv2 Musical Instrument Digital Interface (MIDI) .mid, .midi, and .rmi AU (UNIX) .au and .snd MP3 .mp3 and .m3u DVD video .vob Macromedia Flash .swf Microsoft Recorded TV Show .dvr-ms*
NOTE: WMP defualts to 2.. To enable 5. run WMP0. Click on tools then point to options. Navigate to DVD then open up the advanced window. In here is everything you need to set things up.
NOTE: If you mess things up simply return to defult settings and start over.
Some common errors you may encounter with WMP.
Error messages are identified by numerical IDs, such as C00D0BC2 and 800704CF. You can determine the ID of a specific error message by clicking the More Information or Web Help button on the error message when you encounter it. The resulting page will indicate the error ID.
: Error's C00D6A and C00D9A while playing DVD's or MPEG-2 content.
This is directly related to either your current video card drivers or the MPEG-2/DVD decoder you have installed (EG: PowerDVD, Win DVD etc ). Reinstalling and/or uninstalling the MPEG-2/DVD decoder (PowerDVD, Win DVD ) and/or video drivers should fix the problem for you.
You should now be able to re-install you decoder ( Power DVD etc ) and continue its use.
Erro : C00DAC:
Cannot play the file Windows Media Player cannot play the protected file because there is a problem with your sound device, such as a sound card or sound controller. You might encounter this error message for one of the following reasons.
Your sound device requires an updated driver. ( update driver )
The selected sound device does not support Secure Audio Path (SAP).
If you have multiple sound devices installed on your computer, try using a different one.
To use a different sound device, on the Tools menu, click Options, and then click the Devices tab. Double-click Speakers, audio device to use, click a different device.
Error : "divide error in module IVIAUDIO.AX at".
Only exists in systems that have various Sound Blaster Li've sound cards and WinDVD installed.
This is infact a compatibility problem between these products. The problem is realized when MP3 oriented applications call upon certain sound card services making it look as though the error was raised from within the application in question.
FIX:Uninstall WIN DVD. Reinstall WMP and AC3 filter and then reinstall DVD WIN.
A simple but rare issue.
ModName.Win DVD "msvcrt.dll" and/or Win DVD MFC application error.
FIX:
Uninstall any java filters. Macromedia and Macromedia Acti'veX.
( to remove Acti'veX go to C:\WINDOWS\Downloaded Program Files and delete the Acti'veX )
What are codecs Codecs/Filters.
Codec stands for Coder/Decoder. Basically it is a piece of software or a driver that adds a support for certain video/audio format for your operating system. With codec, your system recognizes the format the codec is built for and allows you to play the audio/video file (=decode) or in some cases, to change another audio/video file into that format (=(en)code).
For example, when you install Windows to your home computer, Windows installs automatically most commonly used codecs into the system, so you don't have to download them separately from their vendors. However there are some codecs that are widely used, but not installed by Windows. Most notably DivX , MPEG-2.
Get all the Codecs/Filters/Plugins you could ever need from:
http://www.free-codecs.com/AC3_Filter_download.htm (ac3filter__0a_rc5)
http://www.free-codecs.com/
NOTE: ( XviD-.0.3-2022004 for Divx ) Stand alone codec for playing Divx instead of the Divx full install.
http://www.microsoft.com/windows/win...0/default.aspx
Ok, you now should be all set.
However Codecs/Filters/Plugins are like any other kind of software installed and things can go wrong. If things are not working as they should try the following.
Download and install "Gspot"
http://gspot.headbands.com/download.htmlBuild 0307 - 23 KB Run the programme and simply point to system and select "List Codecs and other Filters"
Its a no brainer really to know whats what here and how to use it to find out the source of the issue, if you have one. If its red, its bad so you then need to trace the Filter/Codec to its source and remove it.
Here is just one very simple excample you may encounter and how it was fixed.
If you have ffdshow file is missing error pop up while running a player application, first go to C:\WINDOWS\system32 and search for ffdshow.en. Its proberly not here though. If it is just leave it be.
NOTE: ffdshow is used for AVI/Xvid enc/dec source.
To fix this "ffdshow Video Codec file is missing " error Simply uninstall your Xvid codec or your entire DivX programme, or any other Filter/Codec you have installed for playback of DivX files and AVI Video Files.
(Some times it seems a few Codecs/Filters dont get along so you must be aware of what you install).
Cheak "Gspot" again and Filter should be removed from the list.
Now you can reinstall the Xvid filter "XviD-.0.3-2022004" or your desired DivX programme.
Now go back toC:\WINDOWS\system32 and search for ffdshow.en. It should be there if it was not before. If the issue is back try a different version of required Filter.
So, thats just excample of a simple fix that got everything working again. Its not to hard to find out what the problem Codec/Filter is and then its just a case of uninstalling it. You can re-install the Codec/Filter but you should double cheak with "Gspot" and ensure the issue has not repeated itself .
If it has you can try and find out if the issue is related to another type filter causing a conflict or use an alternate Filter/Codec that will perform the same task .
Search for an updated version of required the Codec/Filter also.
Ok, thats pretty much the basics in getting correct and stable 5. sound working the way it should with your new Creative Audigy 2 ZS sound card.
I hope this has been of help.
Regards,xmn.
Message Edited by xmn on 2-24-2005 08:02 PM
Message Edited by xmn on 2-24-2005 08:04 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:09 PM
Message Edited by xmn on 2-24-2005 09:29 PM
Message Edited by xmn on 2-26-2005 03:07 PM

BUMP, just incase its been missed by a new board member

How do I connect my Apple TV to my Philips surround sound DVD system?

I can't seem to get surround sound when watching Apple TV (or when watching live or recorded TV via my Virgin Tivo). I use a three-years old Philips DVD home surround system to get surround sound when I'm watching Blu-Ray (I have connected my Philips Blu-ray and my Philips DVD player without difficulty). But I can't figure out how to get surround sound whne watching Apple TV. I bought an optical cable with an audio jack on one end, to connect to the DVD player and the optical end clicks into the ATV. Still nothing. Any ideas?

The surround system seems to support digital audio - it has settings for HDMI audio and video (even though it doesn't actually have an HDMI port) I bought the optical/audio cable on the advice of a staff member in the Apple Store, but frankly, she didn't see, to understand my problem. She recommended I insert the cable into the "MP3 cable IN" port but that' not working.
I'm probably not explaining myself very well - bottom line: I have a DVD surround system and an Apple TV, so how do I connect them?

How do I set up optical surround sound on my mac mini?

Hi all,
I have a funny situation where my mac no longer recognises my receiver as a surround sound device through the digital optical connection. It used to, it worked for about a year and a half, then suddenly stopped sending 5.1. 2.0 still worked (mp3s, avis), but trying to send 5.1 (mkvs) ended up with no sound whatsoever, on any app (VLC, Plex).
My equipment: 2009 Mac Mini running OS 10.6, Denon AVR-3082 amplifier, connected via optical link.
I tried a complete reinstall (as it had been a while), and I remember last time I set up 5.1 on my mac mini, it was some very involved process involving Perian and changing settings in the DVD player. I saw the default interface now supported setting up speaker configuration directly through the Audio/Midi setup utility, however this doesn't seem to work for me. When I select multi-channel audio output, all the options except "Stereo" are greyed out. I am using "Digital out" as the output device (only choice), and have tried 44.1 and 48kHz. My amplifier does not support HDMI audio input, which would be the simplest solution, so I am stuck using this optical solution.
On this clean install (not even any OS updates), 2.0 playback works (mp3 through VLC), and now 5.1 playback is mixed down to stereo by default. I have seen a number of guides online saying to use Perian, edit config files and so on, but they are all several years old so I presume somerthing has changed since.
Does anyone know how to get 5.1 output from my mac mini to my receiver, in the way it used to work for years until last week? Thanks in advance.

You can download mail for exchange to a pc or laptop then use nokia pc suite to install it.
The bug still exists were your email will be show up as being sent from Mail For Exchange and not you name
Anyone know a way around that?

Looking for a surround sound app

hiya
i'm planning to buy an iPhone 4 but i have some questions. i heard there are preset EQ settings on the iPhone but is there an app (or a way) to make the sound of your MP3 files (mine is atleast on 192k) a bit more better or make it like a surround sound? any sugestions? thanks.

As mentioned, a 5 channel surround system is very hard to find in the price range you are looking at and even harder to find with half way decent quality. you might want to consider a 2 channel setup which will greatly improve the quality of the components and provide cleaner sound output at higher volume levels. If 5 channels is a must, then the build quality, sound quality, and frequency response will need to be sacrificed. You will have to ask your self what is more important: Sound quality? Or surround sound? At this price point, even small differences in price/brand can make a large impact on sound quality.
If surround sound is a must, then I would consider looking at the Sony HTSS370. This will be your best option of all possible solutions. It is a discontinued model though, so the chances of finding one at a local best buy will be slim and it may need to be ordered online.

Sound no longer playing through Surround Sound via TV

I have had my Mac Mini for about a year now and recently purchased a new 3D LG TV. Prior to that I had another LG hooked up through it and have a Panasonic surround sound system set up with I believe it's a Gefen digital to analog converter, because unfortunately LG only makes digital and alls that is available is analog through my surround sound. I have always been able to listen to my computer through the surround sound, however, since I purchased this new TV I have not been able to. The sound plays through the TV speaker but will not play through the surround sound yet when I change inputs over to my PS3 or DirecTv I can hear everything else except my computer. This is why I am convinced it is the computer and not the TV. I don't know if I'm missing a setting or something needed to change for this type of TV or what. I am pretty technical when it comes to electronics so I have tried changing all different types of settings and played around trying to fix this but so far no luck so who has an idea or ever heard of this before?

@mndwgz and Lousyfool
Sorry for the delay, however, I was out of town and just getting back to this issue. I'm not 100% positive but I'm pretty sure that it has something to do with the computer settings or something of the sort because like I said prior to me switching tv's it has worked no problem, both of which were connected the same exact way. Both LG tv's only have an optical digital output port on it while my Panasonic surround sound only has an A/V input. To solve this I have a Gefen Digital to Analog converter in between the connection from the TV and the Surround Sound, so my computer is not connected anything in between the computer and HDMI connection to TV. Sound comes out of the TV through the computer but will not bypass through the TV to the Surround Sound. However I know it's not the TV settings because my PS3 regardless of the HDMI input plays sound through and over all my speakers. I have not tried rerunning my computer through the old LG LCD tv connect the surround sound as well to see if it worked because all the way up until I switched to an LED tv, it had. It's weird how this is a problem but have tried switching settings, changing inputs, problemsolving etc. but just don't see how my PS3 is converted through the tv to the converter to the surround sound and my mac mini is not!
Old LCD TV- LG model 42LH30
New LED TV- LG model 47LM6200
Surround Sound- Panasonic model SA-PT950
Converter- Gefen Digital to Analog Converter

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Convert mp3 to 5.1 surround sound?

Similar Messages

Maybe you are looking for