Convert mp4 files to mov

I have recently succeeded in using compressor to convert mp4 files into mov files using the h264 settings. however, this is no longer working due to the bugieness of compressor. I have also tried it with Media Encoder but that creates files three times the size of the original.
Any one know of anyother way to do this?

Sure. No argument there. But you have to work with the files given to you from the clients. In this case MP4's encoded in such a way that the audio remains compressed on the timeline. Converting the files to mov is the quickest conversion process.
Also the final product is for web streaming anyways. I have considered converting just the audio but it's easier file management and it also avoids sync issues.
So yeah anyways now I'm using Media Encoder the conversion is faster and more dependable than compressor. I also now limit the bit rate to 2000 kpbs/sec to keep the file size of the converted file from slowing down the editing process. the resulting file sizes are not much smaller than the original mp4 files.
Seems to be the best solution so far. Batch convert at night and edit during the day.

Similar Messages

HELP: I have an impossibly long rendering time after converting .MP4 files from Go Pro Camera to .MOV on Final Cut Pro 7. PLEASE ADVISE.

I am working on a project and shot guerilla style footage with a Go Pro camera, which produced .MP4 files incompatible with FCP7. When I converted the files to .MOV, I realized the rendering time in the sequence editor is impossibly long. I am working with a deadline and the rendering time exceeds the deadline, let alone editing time. Suggestions???

Telling us you converted to .mov doesn't tell us much. MOV is a container that supports a very wide range of codecs. It is the specific CODEC that matters.
You most likely did not convert the material to a FCP7 native format. ProRes is recommended and, given the compression of the GoPro, ProRes LT would be the best choice.
Use Compressor to convert everything to ProResLT and life will be much simpler.
x

Drifting sync with converted MP4 files

Hi there. I'm converting some MP4 files to .mov using AIC using slipstream so that I can edit the footage in FCP. I find that the sync is drifting very gradually within a few minutes. The sound is an aiff file recorded digitally at the time. Any idea what might cause this? Thanks. Should I use another codec?

Do not use ProRes HQ. It's overkill unless you are working with FILM not VIDEO. Just use ProRes 422. You will see this documented all over this forum. It was even discussed earlier today.
To the OP- A lot of people also use MPEG Streamclip (free download) to convert files to editing formats. Not that there is anything wrong with Compressor. I just want to point out another option.
What sample rate was the audio recorded in? 44.1khz or 48khz? If it's the former it would explain why your audio is drifting. Try using QT to convert to 48khz AIFF 16 Bit

Converted .avi files to .mov in quicktime, can't transfer to ipod.

so i recently converted .avi files to .mov using perian in quicktime. i imported them into itunes, and they play just fine there. unfortunately, they won't load onto my ipod. i get an error that the format is not recognized by my ipod. has anyone had this issue? if so, am i doing something wrong, and/or how can i correct this? i'm using a 2 ghz powerpc g5, and a 160 gb ipod classic. thanks!

You need to convert to MPEG-4.
(55389)

How can I convert rm file to .mov?

Hi,guys
Can anyone tell me what software is used for converting RM file to MOV file?
Thanks

I had the same issue, however I used this program to transfer ...avi,mpg,wma..etc...;
http://www.videora.com/en-us/Converter/iPod/
I'm pasting this from the Videora site, the settings worked for me when others didn't, enjoy:
Configuring videora converter
0) Start Videora iPod converter.
1) Click setup in the left nav.
1.5) Click the profiles tab.
2) Click new profile.
3) Now, configure that profile:
profile name: ipod
in the video settings section...
mode: MPEG-4 > CBR
resolution: 320x240
passes: one
bitrate: 768 kbps (384 kbps also works)
framerate: 29.97 fps
in the audio settings section...
bitrate: 128 kbps
sample rate: Input
channels: stereo
4) Click apply to save the profile.
Now, you're ready to transcode.
1) Click convert on the left nav.
2) Click the transcode new video button.
3) Pick your source video. Mine was an AVI from a torrent.
4) Under quality profile, choose "ipod", the profile you created using the steps above.
5) Click start.
Now you're ready to get the video on your ipod
1) In iTunes, under the File menu, select add file to library. Find the transcoded one. By default, the transcoded videos pop out under the Videora install directory.
2) Drag and drop to your ipod.
Questions/observations:
1) I haven't been able to get H264 anything to work. Is it broken? How much smaller than MPEG4 is it?
2) 768 kbps video was about 400 megs/hour; 384 kbps video was about 231 megs/hour. I could readily see a difference in video quality.

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

How to convert mp4 file to m4v file ?

hi
how to convert mp4 file to m4v file ?
thanks

Here are the most popular solutions:
Zamzar (online, free)
Handbrake (open source, free)
Wondershare (fastest, paid)

Converting .m2t files to .mov

How can I convert .m2t files to .mov without loosing any quality?

Or this one, just down the page here:
http://discussions.apple.com/thread.jspa?threadID=2044298&tstart=0

Converting mp4 files to mp3 files

could someone tell me how to convert mp4 files into mp3 files? thanks

Now this is clear.
You didn't have an .mp4 file or even a .m4a file. Yours is .m4p.
The "p" stands for protected.
The rules say you can burn your .m4p files to CD. The CD file will be in .aiff format.
Drag the .aiff file into iTunes and then "convert" (using the options in your preferences for bit rate and extension).

I have converted m2ts files to .mov to edit in FCE (4.0.1) When I drag the clips into the timeline they need rendering, as much as a minute for a 30 sec. clip. Is this normal? I am using OS 10 . My easy setup is apple intermediate codec, 720p30. Any help

I have converted m2ts files to .mov in streamclip, for editing in fce 4.0.1. When I drag them into the fce timeline the clips need rendering, as much as a minute for a 30 second clip. Is this normal? My OS is 10.6.8. My easy setup in fce is apple intermediate codec 720p30. Any advice to avoid the rendereng would be helpful. Ann

To what codec, frame size & frame rate did you convert the files in Streamclip?
If it isn't AIC 720p30, you'll need to render.
x

Convert MXF files to MOV files, NO LASTCLIP.TXT in FCP 5.1.4

Hello everyone. I am new to the forums. I have a project I have been asked to edit where the files came off of a P2 Card from a Panasonic HVX2000. The problem is, they didn't copy the LASTCLIP.TXT files off of the P2 Card. So I just have the files themselves. Is there a way to convert the files to .MOV files? I do know about the Log & Transfer, but you need the LASTCLIP.TXT for that. Thanks!!

#38-P2 - Missing LASTCLIP.txt file. How to rebuild.
Shane's Stock Answer #38 - When you offloaded the P2 cards, you forgot to get the LASTCLIP.tct file? No worries, not all is lost.
MISSING LASTCLIP.TXT FILE:
http://www.dvxuser.com/V6/showthread.php?t=58755
If you neglected to copy the "lastclip.txt" file all is not lost. Much like the six million dollar man, we can rebuild him.
Lastclip.txt can be generated by any text editor. If you are using a mac then open up textedit.
Create a new txt file. It will have 3 lines to it.
The first line is the name of the last clip that was recorded.
Back to the finder. Open up your CONTENTS folder. In there, open up your VIDEO folder. Organize the folder by Date Last Modified. Find the name of the last file in this folder. If you have 16 clips in the folder is will be 0016ag.mxf or something like that. Four numbers and two letters followed by .mxf.
Take this name and place in the first line of your text file. On the next line of the text file type in "1.0" (don't include the quotes).
The third line is the number of clips in the folder +1. If you have 16 clips then the third line should read "17" (again no quotes).
I'm not 100% sure if the number on the third line is the number of clips left in the folder (after any on-set deletions) or if it is the total number of clips generated during this session with the card. Try both. Remember to add 1 to that number.
Your txt file should like something like this:
0016ab.mxf
1.0
17
That's it. You should be good to go. Put your CONTENTS folders in separate folders with separate LASTCLIP.txt folders and import them as separate P2 cards.
The annoying thing is that all of the various .mxf files in these 6 folders are locked items and they must all be unlocked manually to erase them.
It's much easier to import direct into FCP 5.0.4 or higher. It does so without leaving all of these locked files on your computer.
Credit for this solution goes to Randy Wedick.
Shane

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Convert mod files to mov for imovie

A helpful person on the forum suggested I use mod converter to convert mod files to mov for imovie. I have purchased the program from the internet but am having trouble getting them to respond with registration number so as I can get started. Has anyone had this problem or do you know the telephone number for emisoft which is who I purchased it from.

wuppet, it is unfortunate that this method did not work for you... I have tested this method my self with iMovie 08 & 09 with JVC .mod files.
I can really only suggest a few things:
1. Make sure that you are changing the .mod extension to .mpg, as I am sure that you did.
2. Attempt to get the originals from the camera, if they're still on the camera. I know that you say that they're the wrong format but iMovie 08 and 08 both support the .mod files found in JVC hybrid cameras. But make sure that iMovie is opened and running before you attach the camera to the Mac. Also make sure that the camera is set to "playback on PC" once you plug it in.
3. You can download the free VLC app, this will allow you to view the movies to verify that they're not corrupt somehow. You'll be required to change the extension to .mpg or .mpeg for this app to read the movies.
http://vlc.us.com/best-media-player/vlc-media-player.php?brand=vlc.us.com&s=goog le&c=vlcuscombm2_bingadm_CS_PG_XB_WB_ATSK&k={keywords}&pk=56-3

Can I convert mp4 file to use in iMovie without buying software

can I convert mp4 file to use in iMovie without buying software

Niel wrote:
Use MPEG Streamclip to convert it to DV.
.. only if the mp4 contains SDef content.
mp4 is a container, no 'format'.
could contain HDef too (Streamclip should convert to QT/AppleInterediateCodec)
could be imported to iM without conversion
could be handled instantly with usage of perian.org plug-in
could not be handled on MacOs anyhow ...
.. depends on, what's inside the mp4 ............

How do I convert MP4 file to AVI or MOV using MacBook Pro (2010)

I am 10.6.4 new user on a new MacBook Pro. This is my first Mac computer.
I want to convert a MP4 video file to AVI or MOV file type. How would I do this on my new Mac? Documentation says I have Quicktime X, but I cannot find Quicktime X on my system. When I try to load Quicktime 7 Pro, my system says I have Quicktime X and cannot load Pro. Apple websites say Pro version will allow me to convert the MP4 files. Anyone have any experience or ideas on what I should do? How do I find Quicktime X? Will it do the conversion for me? Thanks

Use MPEG Streamclip, or open the QuickTime Player from the /Applications/Utilities/ folder, installing this software if needed.
(53722)

Convert mp4 files to mov

Similar Messages

Maybe you are looking for