Convert MWSF Keynote Speech to iPod - doesn't work

I saved the .mov of the Keynote speech of Jobs' MWSF to my PowerBook, and this went well, but when I tried to convert it to play on my iPod so I could watch it on an upcoming trip with QT Pro, all I got was a white screen. Odd, also, was tha it converted the 1 1/2 hour video in about 5 minutes.
I've performed this conversion dozens of times with other .mov's without issues.
Any ideas? The .mov file plays fine, BTW

I hear ya, but why in the World would Apple not WANT people to have/hold/distribute their keynote as many times as possible?
As a 22 year Mac owner, I'll never figure out their marketing folks.
Anyway, thanks. Guess I'll have to watch it while tethered to the Web.

Similar Messages

Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

Go to
http://bt.custhelp.com/app/answers/detail/a_id/47531
and follow the instructions
This was put up by BT several months ago as part of the advance notification that the Yahoo service through them was closing

IPod doesn't work after mac connection

i don't know why my mini ipod doesn't work anymore (it doesn't read the songs!) after i connected it with an imac g3. i started my ipod with a pc... and transfered a program for mac with it... then i connected it with the mac and now it doesn't read the mp3... suggestions?

Try to do a Reset and a Restore, bear in mind please make sure that you have all the music with your iTunes on your computer, as doing a Restore will erase all the data in your iPod

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen. Now the ipod doesn't work at all. Any suggestions?

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen ( non-registered) unsuccessfully. Now the ipod doesn't work at all with any public firmware. Any suggestions?

You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, you'll need to take this up in the forums to which you have access as a member of Apple's iOS developer program.
Regards.

TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade."

My Ipod doesn't work ... I have just the apple light on and off

My Ipod doesn't work ... I have just the apple light on and off
can you help me please

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help! I deleted a folder, and now my iPod doesn't work!

Being the new owner of an iPod, I was unaware that I was required to use iTunes to manage data. Instead, I browsed the iPod's files using Windows Explorer and manually deleted a folder of pictures. Now my iPod no longer works; it displays a link to the Apple support site. My computer no longer recognizes the iPod (once it is connected, it displays the removable drive in My Computer, but doesn't show up in iTunes. iPod Updater freezes when the iPod is connected.), so I cannot restore it. Please help!
PC Windows XP Pro

had the same problem aswell mate, dont worry its not too complicated
1st step is to get ur ipod into disk mode and open my computer. once here right click on removable disk and select format. if this works that means ur computer is atleast responding to your ipod and the problem should be over and done with.
if that doesnt work goto step 2
step 2 is, when you turn your ipod on does it make any sounds??? if it makes some beeps and little sounds you have a problem with your hard disk in the ipod. not to worry if your ipods new its under warranty and you can send it back.
step3 is to call apple on 1-800-275-2273 between 9 am and 9pm. follow the prompts and talk to a consultant.
the same thing happened to me, so everything above is what i was told from an ipod consultant. good luck and dont stress.

Synching contacts from computer to iPod doesn't work with Contacts

Do not understand why Contacts (on iPod) doesn't get Entourage Address Book from Mac computer.

Restore from a backup at which point Skype was on the iPod. Apps are not part of the backup, but all of your apps should still be restored from iTunes.

IPod doesn't work need help

I have been trying to get my ipod to work by following the online troubleshooting guide but it doesn't help.
my ipod doesn't start properly it shows that file icon wioth the caution symbol, and sometimes shows a battery icon with that same symbol, when it connects it stays connected for a few secondsthen it restarts a there is a clicking sound coming from the ipod.
please help

Hello,
If you are getting the "sad iPod" and the iPod's hard drive clicking, these are both indicators that your iPod's hard drive is probably out of place. Before you go to Apple about this, try this and see if it solves the problem for you:
To get your iPod's hard drive back into its correct place, use you hand to tap it firmly on both sides several times, or until if you hear the hard drive stop the clicking.
This isn't a joke, because an Apple employee instructed someone to do this, and it has worked for many people ever since!
Also, have you seen these two helpful links yet?
iPod displays a folder icon with an exclamation point
Exclamation point and folder (post)
I hope this helps! Post back it your problem is solved or not..
~~Kylene

Radio in IPod doesn't work anymore?

I bought a radio remote which I have been always using in my IPod until one day it doesn't work with my ipod anymore.
The radio option is not visible in the menu. What's weird however, is that the remote still works - I can navigate through my songs list, turn up/down the volume and when I connect the earphones on the jack, I can still hear music. I've tried connecting the remote to other ipods and it works.
Is there anyway I could have this fixed without changing the whole board?

You have to use the ipod Software Updater to restore your ipod. if you're using itunes 7 (or 7.0.1) then you can simply restore the ipod from the iPod Summary Screen. if your ipod is not showing up in itunes or you're using an older version of itunes then you should download the iPod Software Updater from: http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
Then connect your ipod to your computer and open the Software Updater and click Restore. Hope this helps.

IPod doesn't work after 1 year - costs $250 to fix????!?!

My wife got me this ipod for graduation last year. I am just a couple months outside the 'warranty' and it doesn't work. The thing cost like $400 at the time.. and it will cost almost $300 to look at fixing.
This is extremely disappointing. I thought apple made better quality products before this experience. I had to send it back twice because of the battery charge problem and now it just doens't work period.

http://www.notpopular.com/blog/comments.php?blogID=63
tip: google can actually be useful!

IPod doesn't work

I paid and downloaded the 2.0 update, but when I try to install it makes it to backing up iPod then I get error 1602 and it cancels. My iPod touch becomes unuseable all it shows is the connect to itunes symbol, but itunes can't find my ipod and it doesn't work. I paid $10 for the update and I'm sitting here with an unupdated iPod that can't do anything.
Anyone else have this problem or knows how to fix it?

I HAVE THE SAME PROBLEM. I HAVE NO IDEA WHAT TO DO. I have tried resetting my iPod, restarting the computer, redownloading iTunes, charging my iPod. I dont know what to do. It wont show up on my computer either.
Made an appointment for the apple store tomorrow.
but if someone could help me on here it would be greatly appreciated.
thanks!

IPod Doesn't Work, So Do I Return It To Apple Or The Store I Bought It?

I have to return my iPod Nano Video because for some reason it doesn't work. It doesn't even turn on. Now do i call Apple and get a switch or something or can i go directly to the store i got it and get a replacement? My dad said that certain items you have to take it up with the company and not the store. Thanks.

My IPOD continues to say "accessorize test, please plug FW OR plug into iTunes."have tried this repeatedly but my IPOD still does not work. Anybody had this problem and what can I do? Reply to [email protected] Thanks. I

QT player export function for iPod doesn't work!

hello
i just bought QuickTime Pro.
unfortunately, the export function for iPod (.m4v) doesn't work...
it stops after a short while and dont't go any further.
thanx for your help!
greetings, iMats
iMac 800MHz PowerPC G4 Mac OS X (10.4.3)

While I haven't used it, QT 7 and the iPod preset (H264 encoding) seem to be quite slow compared to other compressors. Many people have mentioned the seeming freeze, while other state that if you let it run long enough it will eventually finish the project. If you don't have the patience to wait, you might want to try exporting to mpeg-4 and see if that works a bit faster.

Convert MWSF Keynote Speech to iPod - doesn't work

Similar Messages

Maybe you are looking for