Convert .MXF file into .mov?

Im looking to bring a .mxf file into FCP. How do I convert it into a .mov file so I can import it into FCP?
Thank you!

Does it say 004GHZ.mxf or something similar? Or HG4783IKSJHD9882094048DLJSH.mxf...REALLY long string of letters and numbers?
The short one is a P2 file, the long one is an Avid file. Depending on where it comes from is how you deal with it. But really, you might have to look into Raylight, or Calibrated or MXF4QT...third party MXF solutions that allow FCP to open MXF files.
Shane

Similar Messages

Convert MXF files to MOV files, NO LASTCLIP.TXT in FCP 5.1.4

Hello everyone. I am new to the forums. I have a project I have been asked to edit where the files came off of a P2 Card from a Panasonic HVX2000. The problem is, they didn't copy the LASTCLIP.TXT files off of the P2 Card. So I just have the files themselves. Is there a way to convert the files to .MOV files? I do know about the Log & Transfer, but you need the LASTCLIP.TXT for that. Thanks!!

#38-P2 - Missing LASTCLIP.txt file. How to rebuild.
Shane's Stock Answer #38 - When you offloaded the P2 cards, you forgot to get the LASTCLIP.tct file? No worries, not all is lost.
MISSING LASTCLIP.TXT FILE:
http://www.dvxuser.com/V6/showthread.php?t=58755
If you neglected to copy the "lastclip.txt" file all is not lost. Much like the six million dollar man, we can rebuild him.
Lastclip.txt can be generated by any text editor. If you are using a mac then open up textedit.
Create a new txt file. It will have 3 lines to it.
The first line is the name of the last clip that was recorded.
Back to the finder. Open up your CONTENTS folder. In there, open up your VIDEO folder. Organize the folder by Date Last Modified. Find the name of the last file in this folder. If you have 16 clips in the folder is will be 0016ag.mxf or something like that. Four numbers and two letters followed by .mxf.
Take this name and place in the first line of your text file. On the next line of the text file type in "1.0" (don't include the quotes).
The third line is the number of clips in the folder +1. If you have 16 clips then the third line should read "17" (again no quotes).
I'm not 100% sure if the number on the third line is the number of clips left in the folder (after any on-set deletions) or if it is the total number of clips generated during this session with the card. Try both. Remember to add 1 to that number.
Your txt file should like something like this:
0016ab.mxf
1.0
17
That's it. You should be good to go. Put your CONTENTS folders in separate folders with separate LASTCLIP.txt folders and import them as separate P2 cards.
The annoying thing is that all of the various .mxf files in these 6 folders are locked items and they must all be unlocked manually to erase them.
It's much easier to import direct into FCP 5.0.4 or higher. It does so without leaving all of these locked files on your computer.
Credit for this solution goes to Randy Wedick.
Shane

How to convert .dv file into .mov file

How can I convert a .dv file into a .mov file?
When I export an iMovie project in "full" quality, it creates a .dv file (I don't even know what that is, really). I've found that websites (like facebook, for example) won't accept it, and that .mov is more common and acceptable. But I don't see a "full quality" .mov option in iMovie.
If possible, I'd really like to take my existing .dv files and convert them rather than having to re-export the original iMovie projects.

Hi jayriggity - .dv is video format, whereas .mov is simply a container in which any one of a number of video formats can be stored. Try 'sharing' your movie to the Web (Share>Quicktime> compress movie for Web). This will create a smaller version of your movie which Facebook should accept.

Convert mp4 files to mov

I have recently succeeded in using compressor to convert mp4 files into mov files using the h264 settings. however, this is no longer working due to the bugieness of compressor. I have also tried it with Media Encoder but that creates files three times the size of the original.
Any one know of anyother way to do this?

Sure. No argument there. But you have to work with the files given to you from the clients. In this case MP4's encoded in such a way that the audio remains compressed on the timeline. Converting the files to mov is the quickest conversion process.
Also the final product is for web streaming anyways. I have considered converting just the audio but it's easier file management and it also avoids sync issues.
So yeah anyways now I'm using Media Encoder the conversion is faster and more dependable than compressor. I also now limit the bit rate to 2000 kpbs/sec to keep the file size of the converted file from slowing down the editing process. the resulting file sizes are not much smaller than the original mp4 files.
Seems to be the best solution so far. Batch convert at night and edit during the day.

I have converted m2ts files to .mov to edit in FCE (4.0.1) When I drag the clips into the timeline they need rendering, as much as a minute for a 30 sec. clip. Is this normal? I am using OS 10 . My easy setup is apple intermediate codec, 720p30. Any help

I have converted m2ts files to .mov in streamclip, for editing in fce 4.0.1. When I drag them into the fce timeline the clips need rendering, as much as a minute for a 30 second clip. Is this normal? My OS is 10.6.8. My easy setup in fce is apple intermediate codec 720p30. Any advice to avoid the rendereng would be helpful. Ann

To what codec, frame size & frame rate did you convert the files in Streamclip?
If it isn't AIC 720p30, you'll need to render.
x

Trouble importing MXF files into Premiere Pro CC

When importing MXF files into Premier Pro (CC or CS6) from a Canon C300, If I have stopped and started the Camera (during an interview for instance) ie, if there are several takes, multiple duplicate verions of my fooatge appear in the folder on my card, when viewed through the media browser in Premier Pro.
If I try to ingest the footage into Premiere Pro (CC/CS6) or use Prelude (CC/CS6) the conformed footage file does not start in the right place. Example, an interview with two takes once ingested (as one file) has the second take first.
Has anybody else encountered this?

Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

Converted .avi files to .mov in quicktime, can't transfer to ipod.

so i recently converted .avi files to .mov using perian in quicktime. i imported them into itunes, and they play just fine there. unfortunately, they won't load onto my ipod. i get an error that the format is not recognized by my ipod. has anyone had this issue? if so, am i doing something wrong, and/or how can i correct this? i'm using a 2 ghz powerpc g5, and a 160 gb ipod classic. thanks!

You need to convert to MPEG-4.
(55389)

Problem importing canon c300 mxf files into Premiere Pro CC 2014

I recently shot some footage with a c300 at 24fps, slog2, 2 audio chanels. I copied the "contents" folder of each cf card to my macbook pro hard drive by dragging across in finder.
When I search from within Premiere Pro's media browser for my files, they show up only as VLC icons, and when I click to import them, I get an error message along the lines of 'unsupported format or damaged file".
I can double click the files in finder and they open in VLC fine.
I'm running the latest version of Prem Pro, Yosemite on my macbook pro which has 2.8ghz i-7 processor, NVIDIA GeForce GT 750M 2048 MB graphic card.
Does anyone know why this is happening?

You could try to convert your XAVC MXF files into MPEG, then load them again , but the new codec may not be well handled by some converters.

Importing .MXF file into Premiere Pro

Hi there, I'd like some advice on how to import .MXF files into Adobe Premiere Pro for editing.
At university, the Premiere software there can support it. It even has a Canon XF100 preset all ready for .MXF files to be imported into and editing. However, the version I have does not have that preset and thus can not support it.
I have come across a decent video converter that maintains the HD quality it was recorded in. However, it places a watermark above it unless I buy the full version. I am unsure, and as a student, it is pretty expensive.
So I'd like to know, is there a way of adding the Canon XF100/.MXF preset into Premiere so I can edit these clips? Or is there a free converter out there which maintains the HD quality without placing a watermark above the video?
I would greatly appreciate any help and advice for this situation.

Hi kazpar0071,
I'm using the latest Macbook Pro, OSX Yosemite. 8.0.1 is the Build number of the software.
The preset is not there when creating a new sequence, however, I usually just create any sequence then drag and drop the media into the sequence, where Premiere will notify me that the sequence settings are different and whether or not I want to keep the existing settings, or change it, which automatically changes it according to the media.
This is not the case, as even when I attempt to import the media into Premiere, I get the error message 'Unsupported format or damaged file'.
Thanks for the info. In your case, the solution usually lies in signing out of Creative Cloud and then signing back in. Sign out, Sign in | Creative Cloud Desktop app
Does it work now? Afterward, be sure to ingest from the Media Browser and not File > Import or by dragging.
Thanks,
Kevin

HT1338 FCP Studio convert MXF Files (Canon C300)

Anyone have a suggested method for converting MXF files shot with a Canon C300 for use with FCP Studio 7.
Thanks!

You can convert the Canon C300 mxf footage to the other common format, like MOV, ProRes MOV as that format is easy to import and edit on Final Cut Pro 7. For convert the Canon C300 MXF to ProRes mov, have two software for your choice:
1. Canon XF Plugin for Final Cut Pro : http://software.canon-europe.com/software/0040354.asp?model=
2. A Converter : Google ....
But use Canon XF Plugin for Final Cut Pro seems that some frames were dropped when transcoded to ProRes 422. So the best way is convert Canon XF300 MXF to ProRes 422 MOV by a mxf converter. ( You can download try this : converter )

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Is it possible to convert PDF file into HTML

Dear friends
Is it possible to convert PDF file into HTML. I have few hundread PDF files i like to convert this files into HTML. I hope it can be done through Java but i don't know how to start this coding. anybody can give me a brief idea to go ahead.

Why do you want to do this yourself? I quick search on Google showed several utilities to do this, some freeware, some commercial.

How to convert .doc file into .rtf file in Java?

Hello All,
I want to convert doc file into rtf format in java and for the same i am not getting any help so pls suggest some solution for that.
Thanks and Regards
only1Vinay

MS-Word formats (DOC) are notorious for not being standardized from one version to another, so what ever you get will be version specific. If you must do the conversion, I suggest you do a MS-Script in Word to do it or one of the .Net languages. As stated the Word format from version to version is not standardized.

Acrobat XI Pro successfully installed, but it failed in converting word files into PDF, why?

I just installed Adobe XI Pro through the download assistant, it looks the installation went well, but when I tried to convert word files into PDF (tried many times), it failed. Anyone has the same problems, any solutions?

Please reply with more information - what your operating system is, do you have Office installed, and what exactly is happening. Is there an error message, does the application crash, and from where are you starting the conversion (using Word and PDFMaker, using Acrobat's Create button, or batch processing).

How to convert jpeg files into word

How to convert jpeg files into Word

Hi Eugene,
I don't think you can convert an image to a Word document, but you could place the JPEG into a Word document using the Insert > Object command in Word.
For other questions relating to Word, you will probably have more luck getting an answer if you post on the Microsoft forums (we can help if you're using Acrobat, or another Adobe product, but you'll find the Word experts on the Microsoft forums.)
Best,
Sara

Convert .MXF file into .mov?

Similar Messages

Maybe you are looking for