Convert numeric value to display as text based on record in another table? ASP/VB

I have an orders table:
orderID (PK)
pickupname
pickupaddress
pickupregion (numeric)
pickuppostcode
deliveryname
deliveryaddress
deliveryregion (numeric)
deliverypostcode
I also have a regions table:
regionID
regionname
On my ASP page, I would like to display the pickup and
delivery addresses as
follows, but also need this to be within a repeat region as I
am displaying
a number of orders on the page (I have wrapped what I want in
the repeat
region in dashes, below):
---------Repeat Region Start-----------
Pickup Address:
Name
Address
Region (pickupregion)
Postcode
Delivery Address:
Name
Address
Region (deliveryregion)
Postcode
--------Repeat Region End------------
As it displays at the moment, I get this (using sample data):
---------Repeat Region Start-----------
Pickup Address:
Joe Bloggs
High Street
12
HT12 5TY
Delivery Address:
Jane Bloggs
The Mall
33
DT6 5TG
--------Repeat Region End------------
Is there any way to convert these numeric values to the
actual region name
but to keep it within one recordset so that I can use the
repeat region? I
tried creating a recordset for regions (SELECT regionID,
regionname FROM
tblRegions WHERE regionID = pickupregion OR regionID =
deliveryregion), but,
because I'm not repeating this region, it just displays the
same regional
name for every order, albeit the first record returned does
contain the
correct values! :o)
I was thinking about some kind of inner join, but it's having
two numeric
region fields in the orders table that is causing me
headaches! PS. I need
to keep the two addresses within one orders table - I had
thought of that!
Got me a bit stumped, I have to say. Any help would be
greatly appreciated.
Thanks.
Regards
Nath.

I've tried this one already.
I tried to leave it blank, & nbsp ; , text,... but the problem is that our lov is build by a function and it always returns a query, so the LOV is never null.
I figured something out: made a process after header that has some cursors to get the values from the database and changed the item to a simple display as text-field. There were only 4 that were wrong, so it wasn't to much work.

Similar Messages

Display as text based on pl/sql - how to return value

Hi,
I have a item set as "display as text based on pl/sql". How do I get the PL/SQL anonymous block to return the value of the item?
My function declares and populates a variable called t_output which is the value I want displayed in the item. The PL/SQL I have written is correct as I have tried it in SQLPlus* with DBMS_OUTPUT.PUT_LINE and I get the correct output, but I don't know how to set my item to the value of t_output. I have tried adding ":P73_ITEM := t_output;" into the end of the PL/SQL block.
Thanks
Lucy

Hi Lucy,
Try this and see.
make the display as:display as text(saves state)
source type: sql query
in source value or expression type
select func(arguments) from table name;
Good luck

Display as text (based on LOV) not working

hi --
I've not used this kind of item before, so there's probably some really simple thing I'm missing....
Have the LOV:
select objecttype_name display_value, objecttype_id return_value
from hdb_objecttype_syn order by 1
Return value is going into page item :P3_objecttype_id (a popup LOV). Have another item, :P3_objecttype_name, which is a display as text (based on LOV) item. When/how is this item supposed to get populated? When I select a value from the LOV, I'd expect the text item to be set to the display value of the LOV, but it is always []. The source type of :P3_objecttype_name is Sql Query, and the query is:
select objecttype_name from hdb_objecttype
where objecttype_id = :P3_objecttype_id
Does the page have to be submitted before the display item is populated? Seems like that wouldn't be very helpful...
Thanks,
C

HI Varad -- I'm afraid I'm new enough to all this to not know how to implement either of your solutions... and that's after scanning the forum for additional info.
How do I get the page to submit? Is there any way to do this w/o forcing the user to explicitly press a button? (which would be way too much, as there are probably 10 LOVs on this page).
If I choose to use javascript, 1) on what item and under what attribute do I put the script (is it on the objecttype_name that needs to be populated?), and 2) where can I find an example of what this might look like? I'm not familiar w/ it at all.
My goal is ultimately to have an LOV that displays both the key value and the name (which I guess can be accomplished by concatenating those together in the LOV select statement), to return the name to the page, and then have the ID automatically filled in to match the key (the example I sent you is backwards, simply because I started building this page w/ only key values displayed, added the name as a test later.) And, I also want the user to be able to type in the ID (no LOV would be attached to it), and have the name automatically populated. I'm guess this could be accomplished in a way similar to having the name filled in after the value is chosen from the LOV... If I can just figure out how to do that!
Thanks,
Carol

Where is "Display as Text (based on LOV, saves state)"

I am developing an application using the version of HTMLDB that comes with OracleXE.
I have a tabular form, in which the default column for a particular item is sourced from a previously entered item on another page. This is a lookup item and needs to be non-changeable by the user. So I want to use the "Display As" option "Display as Text (based on LOV, saves state)". However, this option is not available in the pull-down for "Display As". The option "Display as Text (based on LOV, does not save state)" is available, but using this option means that the item is not saved to the database.
Does anyone know why the stateful display as option is not available.
Thanks in advance,
Rob

Scott, thanks for the feedback. The problem is that although the value is displayed correctly, it is NOT saved to the database. Effectively, header information is entered in a previous screen, and one of the entered fields is written to each of the detail lines associated with the header. We are re-platforming an existing application (written in an obscure form of basic), and at this stage changing the schema is not an option. So this header item (which is a foreign key to a "store" table), is meant to be written down to each line, on the screen displayed as the store name, and written to the inserted lines as the lookup id. If I use the dispaly as text save state option teh database is updated correctly, but displays the id rather than name on the screen. The only display as lov option i can see is the one that does not save state. If I use this option the screen displays as I want but the database is not updated. I need to use the display as lov saves state option. but i do not see it.
Any ideas?
Thanks for your time.
Rob

Annoying [ ] with "Display as Text (based on LOV, saves state)"

Hi all,
I've got a form where some items are shown as “Display as Text”. These values are displayed normally.
But I also have some items which are shown as “Display as Text (based on LOV, saves state)”. When I run the page and these items don't return a value (because it isn't filled in in another page), we get the annoying []-sings.
Is there anyone who knows how to fix this, I just want to display nothing when there is no value.

I've tried this one already.
I tried to leave it blank, & nbsp ; , text,... but the problem is that our lov is build by a function and it always returns a query, so the LOV is never null.
I figured something out: made a process after header that has some cursors to get the values from the database and changed the item to a simple display as text-field. There were only 4 that were wrong, so it wasn't to much work.

Display As Text (based on LOV, saves state) "p_t03" was assigned by APEX

Hi All,
I have an ITEM
Name: P36_INT
Display As: Display As Text (based on LOV, saves state)
Output in my HTML:
[input type="hidden" name="p_t03" value="YES" />[span id="P36_INT">Interior[/span>
'p_t03' was assigned by APEX
In my Javascript I have to access it as the following to get the "YES" value:
var lintObj = html_GetElement('p_t03');
Originally it was 'p_t01' but it changed from 'p_t01' to 'p_t03' somehow.. out of my control.
How do I assign an ID or assign my own name to the "hidden" item?

Scott, thanks for the feedback. The problem is that although the value is displayed correctly, it is NOT saved to the database. Effectively, header information is entered in a previous screen, and one of the entered fields is written to each of the detail lines associated with the header. We are re-platforming an existing application (written in an obscure form of basic), and at this stage changing the schema is not an option. So this header item (which is a foreign key to a "store" table), is meant to be written down to each line, on the screen displayed as the store name, and written to the inserted lines as the lookup id. If I use the dispaly as text save state option teh database is updated correctly, but displays the id rather than name on the screen. The only display as lov option i can see is the one that does not save state. If I use this option the screen displays as I want but the database is not updated. I need to use the display as lov saves state option. but i do not see it.
Any ideas?
Thanks for your time.
Rob

Display as Text based on LOV - formating

I have a slight problem with
Display as Text based on LOV report column formating.
Whatever I try to enter, regardless where CSS Clas, CSS Style - formating simply
doesn't work. The only formating that works is:
Number / Date Format.
Is there a solution for this?
Thanks,
Denes Kubicek

I found a simple workarround and I will post it:
1. Instead of using LOV I created a function that does the same
( using a cursor and returning a value )
2. Since the field needed to act as a link, I used css to format the output
and it worked just fine.
Thanks,
Denes Kubicek

Excel converts numeric values to date

Hi,
I have a JSP page which is sending data to excel.
response.setContentType("application/vnd.ms-excel");
response.addHeader("Content-Disposition", "attachment;filename=\"a.xls\"");
I am using codes above. But excel converts numeric values to date. for example I send "18.5" but excel convert it to "18.May". But when I add " " before the value there is no problem. But I dont want to use this
how can I fix it. Thanks in advance.

hi,
the problem is not with your jsp encoding but with excel settings
enter the mathe-statistics block in your excel program change setting from date to numbers
that is all

How 2 convert numeric value to character value?

Hi friends,
I want to convert numeric value to the character value.
Is there any FM available?
Points rewared soon.
Regards
Ronn

REPORT ZSPELL.
TABLES SPELL.
DATA : T_SPELL LIKE SPELL OCCURS 0 WITH HEADER LINE.
DATA : PAMOUNT LIKE SPELL-NUMBER VALUE '1234510'.
SY-TITLE = 'SPELLING NUMBER'.
PERFORM SPELL_AMOUNT USING PAMOUNT 'USD'.
WRITE: 'NUMBERS', T_SPELL-WORD, 'DECIMALS ', T_SPELL-DECWORD.
FORM SPELL_AMOUNT USING PWRBTR PWAERS.
CALL FUNCTION 'SPELL_AMOUNT'
       EXPORTING
            AMOUNT    = PAMOUNT
            CURRENCY = PWAERS
            FILLER    = SPACE
            LANGUAGE = 'E'
       IMPORTING
            IN_WORDS = T_SPELL
       EXCEPTIONS
            NOT_FOUND = 1
            TOO_LARGE = 2
            OTHERS    = 3.
ENDFORM.                               " SPELL_AMOUNT

Plsql query converts numeric value or currency(rupees) to English words

Hi,
I Need a plsql procedure/function query that converts numeric value or currency(rupees) to English words.
Please help .that is very very important and urgent for me.
Thanks in advance.
Regards,
Karthik T

that is very very important and urgent for me. Then help yourself by looking on all over internet :
http://www.google.nl/search?hl=nl&q=oracle+numeric+word&meta=
Or by using the search feature against the forum :
http://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bnumber+%2Bword&objID=f75&dateRange=all&userID=&numResults=15
That would be faster.
Nicolas.

Cascade LOV display as text (based on LOV) in clasic report

Hi Experts,
It is possible to use cascade LOV - item is displayed as text (based on LOV) in clasic report ? (Display AS)
I would like to reference to another column displayed in the report in LOV.
Example:
select description d,
       val_strg2 r
from domain_cntr
where cntr_name = 'CH_PRIM_ST_NOTE'
   and val_strg1   = #PRIM_STATUS#
   and active_idc = 'Y'#PRIM_STATUS# is the column i would like to reference.
Is it possible ? IN CLASIC REPORT
regards
J :D

Hi,
>
Is it possible ? IN CLASIC REPORT
>
Yes.
It may a rather long thing to code, so be ready for it.
Here is how:
a. Use APEX_ITEM API in your Report Query. Make sure you specify the p_item_id parameter , using #ROWNUM#
b. In the Parent LoV wrtie an onChange event trigger that fires a JavaScript function and pass the ID of the element .
c. In this JavaScript function make an AJAX call to get the <select>...<option...>...</select> , in short the complete HTML of the child LoV
d. Push this HTML fragment into the Child Lov. You construct the ID of the target based on the ID of parent . E.g. f01_0001 to f02_0001.
e. You may additional keep the child invisible or disabled initially, and then make it visible/enable it after it is populated.
Regards,

Cannot see Display as Text (based on lov, saves state)

I have raised this question on the HTMLDB forum (Where is "Display as Text (based on LOV, saves state)" but in case its XE specific I am posting here too.
I have a tabular form in the XE version of HTMLDB, and wish to use the "Display as Text (based on LOV, saves state)" option. However, this option does is not available to me - are there some conditions necessary for this option to be displayed?
Thanks, Rob

Rob,
I doubt it's an XE specific issue. I've asked for more information in the original thread.
Sergio

Display as text (based on LOV saves state) : possible border ?

Hi,
Like mentioned in the subject, I have many Display as text (based on LOV saves state). I would like to have a frame or a border around this field eventhough it's read only, like a regular field. How can I do that ?
thank you.

Depending on your visual requirements, you could change the items to Text Fields (disabled or not) then simply make the Read-Only atttribute set to "always" or something that would equate to "always". It would look just like a text field (since it would in fact be one), but would be read-only.
Sadly, this would require you to change all your items to the new type which would take time.

How do you convert numeric values into english words?

I am interested in creating a field in adobe acrobat that references a total dollar amount field. I want the java script to convert the numeric number into a written word, such as $59.59 as Fifty Nine and 59/100. I have no experience writing java script code and would really like some help on how this can get done. Its also important to embed in the programming that if their is no numeric value to reference, then nothing get referenced. This means an empty text box. Thanks for any help.

Im using the below script...... I'm a complete novice at this and helping a friend out with it.
Any info is appreciated.
aTens = [ "Twenty", "Thirty", "Forty", "Fifty", "Sixty", "Seventy", "Eighty", "Ninety"];
aOnes = [ "Zero", "One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine",
"Ten", "Eleven", "Twelve", "Thirteen", "Fourteen", "Fifteen", "Sixteen", "Seventeen", "Eighteen",
"Nineteen" ];
function ConvertToHundreds(num)
   var cNum, nNum;
   var cWords = "";
   num %= 1000;
   if (num > 99) {
      /* Hundreds. */
      cNum = String(num);
      nNum = Number(cNum.charAt(0));
      cWords += aOnes[nNum] + " Hundred";
      num %= 100;
      if (num > 0)
         cWords += " and "
   if (num > 19) {
      /* Tens. */
      cNum = String(num);
      nNum = Number(cNum.charAt(0));
      cWords += aTens[nNum - 2];
      num %= 10;
      if (num > 0)
         cWords += "-";
   if (num > 0) {
      /* Ones and teens. */
      nNum = Math.floor(num);
      cWords += aOnes[nNum];
   return cWords;
function ConvertToWords(num)
   var aUnits = [ "Thousand", "Million", "Billion", "Trillion", "Quadrillion" ];
   var cWords = (num >= 1 && num < 2) ? "Dollar and " : "Dollars and ";
   var nLeft = Math.floor(num);
   for (var i = 0; nLeft > 0; i++) {
       if (nLeft % 1000 > 0) {
          if (i != 0)
             cWords = ConvertToHundreds(nLeft) + " " + aUnits[i - 1] + " " + cWords;
          else
             cWords = ConvertToHundreds(nLeft) + " " + cWords;
       nLeft = Math.floor(nLeft / 1000);
   num = Math.round(num * 100) % 100;
   if (num > 0)
      cWords += ConvertToHundreds(num) + " Cents";
   else
      cWords += "Zero Cents";
   return cWords;
You can use the following script for the custom calculation for the words field when the number field is named "Number":
event.value = "";
var f = this.getField("Number");
if(f.valueAsString != "") {
event.value = ConvertToWords(f.value);

Why IID_ICURSORREGION no longer name a numeric value in ID CS6 SDK based Plug-in?

File /Users/pengz/IDCS6SDK1/build/mac/prj/../../../source/sdksamples/JYTCtrl/JYTCtrl.fr; Line 143 # Error: Identifier 'IID_ICURSORREGION' does not name a numeric value.
But it does not have compile error on window version. It only appears in Mac version.

Hi! Dirk
I think I got the answer, which is that I did not include "CursorID.h" file on my .fr resource.
Thanks for reminding me the head files

Convert numeric value to display as text based on record in another table? ASP/VB

Similar Messages

Maybe you are looking for