Convert photos using the Tools Photoshop Imagine Processor (Photoshop CS 5)

All of a sudden, I am having issues when I attempt to convert photos using the Tools > Photoshop > Image Processor option in Adobe Bridge. I used this methodology in the past and the conversion to JPG or TIFFs would fly with no interruption. Now I am getting now getting getting dialog boxes with "New Snapshot" in the title, I click OK, then get a message, "The command "Feather" is not currently available," I click "continue, and gert a "New Layer" dialog box, I click OK, and get a "Fill" dialog box, I click OK and the JPG or Tiff is then generated. This series then starts over on the next photo to generate. I am using Photoshop CS5 on a MAC. I did uninstall and re-install Photoshop l, but I am getting the same series on messages. Any suggestions? Thanks

It sounds like you have an action running when processing the photos
Look at the bottom of the image processor dialog and and see if Run Action is checked

Similar Messages

I used to be able to use the tools, edit image and highlight certain items in the pdf photos. why can I not now?

I used to be able to use the tools, edit image and highlight certain items in the pdf photos. why can I not now?

Usually Acrobat has linked to PhotoShop to do the photo editing. You might check the updates for Acrobat and PhotoShop.

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

Have you tried resetting all tools?

I try to use the tools in photoshop elements 13, instead of one of the tools I only get the eraser. Whatt can I do?

When I try to one of the tools in photoshop element 13 I get always the eraser. I push the brush. But I het once again the reaser. What can I do to get one of the other tools? Joost van Santen

Thank you very much. It helped. Joost van Santen
Joost van Santen Light Art
Kiefskamp 6 NL1082KA Amsterdam Netherlands
T 00-31-20-6125404
documentation <http://www.joostvansanten.nl>
inspiration <http://www.lightart.nl>
Op 12-11-14 21:06, Barbara B. <[email protected]> schreef:
I try to use the tools in photoshop elements 13, instead of one of the tools
I only get the eraser. Whatt can I do?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in
Photoshop Elements - View the full discussion
<https://forums.adobe.com/message/6923517#6923517>
Go to the editor preferences>general, click this button and restart the
editor:
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6923517-694468/pr
efs+reset.gif
<https://forums.adobe.com/servlet/JiveServlet/showImage/2-6923517-694468/prefs
+reset.gif>
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6923517#6923517 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Elements by email
<mailto:[email protected]ware.
com> or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3347> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

I just installed MacOS X Yosemite on my MacBook Air 2011. After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes. How do I fix this problem?

I just installed MacOS X Yosemite on my MacBook Air 2011. After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes. How do I fix this problem?

If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
Download Photoshop Elements products | 12, 11, 10

I have a Lumix G2 camera with two lenses, when I take RAw pics I Convert them using the Adobe RAW co

I have a Lumix G2 camera with two lenses, when I take RAw pics I Convert them using the Adobe RAW converter. Now I have bought a Lumix 25 macro lens and it will not convert these pics into a readable file

That's strange. The lens shouldn't have made any difference. Does the camera do JPG OK with that lens fitted? Did the samera come with software to convert RAW files, and if so, does it work on the problem files?
When I checked your camera against this list, I see it has two entries for the required version, so I suspect that the lens electronics require a slightly later version of ACR. If I am right, you'll have Camera RAW 5.7 and you need 6.1 So what version of Photoshop do you have? You need CS5 to support ACR 5.#
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
If you have CS4, then you'll need to install the latest DNG conversion software, which is free. You'll then be able to open the files in Photoshop CS4

How to use the same element in different photoshop files?

It occurs to me often that I use the same element in different photoshop files, a header or footer shown in the example below. So when the footer changes in one document, I need to change this footer in every other single document.
Is there a possibility to use some kind of template, one single document, that can be placed in different files , which is still editable afterwards?
Thanks in advance.
I'm using Photoshop CS6

In a single document you can have several pages and these pages may have headers and footers that share smart objects. If you replace the contents of the an embedded smart object on one page page that is shared on an other page the pages you will see both pages contents are changed. For they share the common object. It is also possibly to have independent smart object layers. It depends how you create the layers in the single document.
Example one sharing a smart object hi-light a smart object layer and use menu layer>Duplicate Layer... This will create a second smart object layer that share a common smart object. Each layer has is own associated transform. Do it again and you will have three layers the share a common smart object. So you can use each layer associated transform to position and size the layers contents. Make a picture package for example. When you hi-light any of the three smart layers and you use menu Layer>Smart Objects>Replace Contents... all three layers contents will be replace with the new smart object. Care must be taken to replace the smart object with an identical size object for only the object is replaced the three associated transform for the three layers are not replaced or changed.
Example two independent smart objects hi-light a smart object layer and use menu layer>Smart Objects>New Smart Object via Copy. This will create a second smart object layer that has it own embedded smart object copy. Do it again and you will have three all have independent embedded smart object that are identical. However they do not have to remain identical. For example if the first smart object layer was created by using ACR to open a RAW file as a smart object layer the embedded object is a copy of the raw file and its associated RAW conversion settings. Double clicking on one of the smart object layers and you will see ACR open on its embedded RAW file with the embedded RAW conversion setting. Changing these settings will update the layer smart object content with new ACR setting and pixel when you click OK in ACR. Repeat for the third and you will find you have three different raw conversions in Photoshop you can mask and blend together to bring out detail.
I think what your missing is that a smart object contains a copy of the original object. Changing the original after creating a smart object layer in document will not effect the smart object layer at all. Its independant from the original having a copy of the original. Only changes to the smart object layer and its embedded smart object effect smart object layers.

I want to set Firefox to never remember history. When I do this using the tools tab and click okay, it goes right back to "Use Custom Settings for History". I don't want that.

I know how to manage privacy using the tools tab at the top of the address bar, or so I thought. I want to choose "Never Remember History". When I do that, and click "OK", the next time I check the privacy settings, the history is right back to "Use custom settings for history". I don't want this. Also, I don't want to use autocomplete for forms, but I can't get those settings to stay, either. I basically don't want info. stored on this computer. My system was hacked several months ago, by some joker who named all my system folders a racist slur (I reported it to Norton, and a technician had a look at it). Anyway, I want to keep things as safe as possible. Please allow me to delete all my history when I close Firefox. I don't really like Google, either, because they have a reputation for not respecting people's privacy. I don't like that I didn't have an option to uncheck google's toolbar when I installed Firefox.
Thank you.

That is probably OK.<br />
You may have changed one of the other history or cookie settings.
If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were made.

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

I have an ipad2 and downloaded photos using the adapter with an SD card. It created two albums.

I have an ipad 2 and recently imported photos using the adaptor and SD card. It created two albums. One called Last imported and one called All imported. Will it create two albums every time I import photos this way? If you delete from either album, it takes it out of the other. Seems it would take up double the space every time I import this way. I am new to this..

I don't believe it creates two separate albums, just two 'folders' to access the photos...and the next time you import photos, the 'last imported' should only reflect those newer photos.
It's my understanding that it does this just to make the newly imported easier to find rather than you having to scroll all the way to the bottom of your photos folder.
Think of it like the 'last documents' option in Word. A document will never live 'forever' in that category, it'll be replaced as soon as there are newer last documents.

Company code split by using the Tool SLO

Hello All,
we are working a company code split project by using the Tool SLO(System landscape Optimization)
in the current scenario, we have one company code , one sales org and 2 plants .we wants to split 2 company codes as per the plants .alos we need to create a sales org for the 2nd company code.
i have following queastions .
1.Documents created before split for one company code and sales org .after split is it possible to change the company code and sales org for the Documents ?
2.in case of Complaints (Credit memo, Returns) when we do with refference to earlier Documents created by different company code .after split we need to create a return memo request (bu using different Company code and sales org)with refference to the earlier Document (created by Different company code and sales org) how it is possible ?
3. the same above point can be for any refference Documents like Inquiry,Quatation,Contract and sales order.
if any of you have worked for this kind of project and Tool, please help me on this .
Thanks
Radhika

Thanks for the reply.
I'd never noticed that "Copy motion as ActionScript 3.0". That was pretty sharp. The only catch is...it doesn't look anything like what I'm used to.
This is what I'm used to:
myTween = new Tween(imageLoader,"alpha", Strong.easeOut, imageLoader.alpha, 1, 4, true);
And this is what I've got:
import fl.motion.Animator;
var tween_xml:XML = <Motion duration="36" xmlns="fl.motion.*" xmlns:geom="flash.geom.*" xmlns:filters="flash.filters.*">
    <source>
        <Source frameRate="12" x="212.5" y="141" scaleX="1" scaleY="1" rotation="0" elementType="graphic" symbolName="Tween 1">
            <dimensions>
                <geom:Rectangle left="-212.5" top="-141" width="425" height="282"/>
            </dimensions>
            <transformationPoint>
                <geom:Point x="0.5" y="0.5"/>
            </transformationPoint>
        </Source>
    </source>
    <Keyframe index="0" tweenSnap="true" tweenSync="true">
        <color>
            <Color alphaMultiplier="0"/>
        </color>
        <tweens>
            <SimpleEase ease="0"/>
        </tweens>
    </Keyframe>
    <Keyframe index="35">
        <color>
            <Color/>
        </color>
    </Keyframe>
</Motion>;
var tween_animator:Animator = new Animator(tween_xml, tween);
tween_animator.play();
I guess I sort assumed that the code would be similiar, (making an '***' out of me and umption) It looks more like XML or MXML than AS3.
Why so different?

My pdf reezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the l

Sorry, I am new to the type of problem-solution process and I do not know how to edit my first statement. My true statement is below:
My pdf freezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the last seven days (3.31.15).

I answered your questions below, BUT while I was searching for properties, I found the REPAIR ACROBAT INSTALLATION feature, did the repair and (Voila!) the issue was resolved!
Thanks for making me search for information.
Karen
I am using Acrobat XI Pro, version 11.0.10.32.
I did not create the file I was working in during the freezes, so I tried a PDF that I created with Adobe and it also freezes when I click on COMMENT. I did discover that the COMMENTS plug-in is loaded. (see image
I have used COMMENT for years without this issue occurring. It started in the last 2 weeks.
I could not find Properties under the file menu, but found a security setting in Preferences under the Edit menu. It did not have a way to allow/disallow COMMENT.

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Convert photos using the Tools Photoshop Imagine Processor (Photoshop CS 5)

Similar Messages

Maybe you are looking for