Convert Physical DPM Management server to Virtual
Hi,
I am looking to convert my existing DPM 2012 R2 physical management server to a virtual server.
The current setup is a physical server with locally attached storage and a secondary DPM server in another site (which is already virtual). Both DPM servers were recently upgraded to DPM 2012 R2 and are running Windows 2012.
I would like to use the same hardware but run DPM as a virtual server and attach the physical disks in Hyper-v as pass-through disk. I don't have enough hardware to do a side by side migration (which would be much easier)
My plan is as follows.
backup DPM database
rebuild physical DPM server as hyper-v server
create new DPM virtual server with same name, ip etc.
install dpm and restore db from backup
attach old DPM physical storage drives to virtual DPM server
I am fairly happy at doing the rebuild and database restore as I have done this before, but I don't know if I can attach the existing DPM drives from the storage pool and retain the data.
I have a secondary server so would not lose the backup data, but it would be a lot easier if i could keep the data on the storage pool
Does anyone know if this will work or have any other suggestions?
thanks
sg
Hi SG,
Your plan will work. You will be able to use the existing drives as long as you bring them into the VM, restore the DPM DB and run
DpmSync. DPMSync will synchronize the DPM database with the replicas in the storage pool. Old link but still applies:
http://technet.microsoft.com/en-us/library/bb808877.aspx
Another thought...why not do a P2V on the DPM server vs. re-install? The only thing you will need to do/could run into issues with is bringing the disks into DPM once it is virtual.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!
Similar Messages
-
Could not create JVM Virtual machine(While starting soa managed server)?
Hi,
While starting managed server I am getting following errors:
Could not commit 1048576KB heap memory at 0x0000000004790000.
Could not create JVM Virtual machine.
After above error SOA managed server is to be down.
Please help me that how can i resolve this issue.
Thanks
DharmHi Dharm,
This is typically printed when we are short on memory.
What is OS version and JDK being using here ? 32bit or 64bit ?
Current Xms and Xmx values ?
Thanks,
Sharmela -
Hi,
I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
This is a the guide I used:
https://technet.microsoft.com/en-ca/library/hh882396.aspx
SCOM + VMM 2012r2 Ur4
One of the Errors(which appears to be root issue):
The PowerShell script failed with below
exception
System.Management.Automation.CmdletInvocationException: VMM is
unable to perform this operation without a connection to a Virtual Machine
Manager management server. (Error ID: 1615)
Use the Get-VMMServer cmdlet
or the -VMMServer parameter to connect to a Virtual Machine Manager management
server. For more information, type at the command prompt: Get-Help Get-VMMServer
-detailed.At line:109 char:12
+ $vmm = Get-SCVMMServer $VMMServer -Credential
$cred;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
at
System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
input, Hashtable errorResults, Boolean enumerate)
at
System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
funcContext)
at
System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
Script Name:
GetStorageSubsystemPerfScript
One or more workflows were affected by
this.
Workflow name:
Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
Instance
name: SCVMM01.Domain.com
Instance ID:
{B5175EAC-D64D-2553-D567-F19B5C864BBD}
Management group: OMGRP82Can you connect from powershell? get-vmmserver <VMMServerComputerName>
If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
You can also collect traces as described
here and attach them to this thread.
Are you using a domain administrator account? (this is the default allowed after SCVMM is installed - until other users are added).
also try restarting VMM server or VMM services once.
this occur if the SQL database owner is indicated as NULL. Try adding the SQL SA account as db owner.
refer this once -
https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
Thanks, S K Agrawal -
How to run a managed server on a different physical server?
Hi,
A) I have the following configuration:
1) Server A:
Weblogic software with domain is installed.
MachineA (ListenAddress=localhost, port=5556)
NodeManager(port=5556)
AdminServer (Uses MachineA, port=7001)
ManagedServer01 (Uses MachineA, port-7002)
ManagedServer02 (Uses MachineA, port-7003)
2) Server B:
Weblogic sofware with domain is installed.
I wish to have ManagedServer11 running on ServerB, and be started/stopped using the Node Manager running on ServerA.
B) My questions:
1) Where to create ManagedServer11, on ServerA ot ServerB?
2) What properties should give to ManagedServer11?
Thanks by advance for any tips or explanations.
Kind Regards.You'e going to have to start the managed server with the node manager located on the same host. You can still control using the admin console but you'll have to configure a machine for each physical host in the cluster.
The Pack & Unpack utility makes the domain configuration on the second host easy.
http://docs.oracle.com/cd/E23943_01/core.1111/e10106/odi.htm#ASHIA5010 -
How to Uninstall a failed Virtual Machine Management Server (x64) installation ?
Dear Technet Team,
I cannont uninstall the Virtual Machine Management Server (x64). Already tried it with the Installation Image. The Uninstalling process suddenly crashed without no error. I delete everything so far DB as well because it was never in use. So how can
I uninstall the Management Server. I did not install it a Cluster as well.
By the way i tried it with wmic but there i got "no instance available" error. I am stucking with this quite a while. I messed it up really hard so i think i must manually delete all regestry keys because i already delete some. Is there a way to
uninstall it Forcefully ?
Thank you!
Yours sincerely,
Tobias
I will Post the Log so maybe someone can help me.
2014-07-31T10:07:43.0139343+02:00 Always:
Trace Session Started
10:07:43:
10:07:43:Application Started
10:07:43:CheckForRemovableMedia: Folder C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory
10:07:44:CheckForRemovableMedia: Folder C:\ProgramData\Virtual Machine Manager Library Files
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\ProgramData\Virtual Machine Manager Library Files
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory, NotContentIndexed
10:07:44:OriginalInstallSource: E:\amd64\setup
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM server is installed
10:07:44:CheckProductByUpgradeCode : found product with upgrade code {0B58D0F8-0532-469C-918B-B8A0A331001b} with version 3.2.7510.0
10:07:44:CheckProductByUpgradeCode: Installed Version 3.2.7510.0
10:07:44:CheckIfVirtualMachineManagerIsInstalled: VMM server found
10:07:44:CheckForRemovableMedia: Folder C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM client is installed
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM web portal is installed
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM agent is installed
10:07:46:Start adding DataItems
10:07:46:WebDeploymentTool
10:07:46:MicrosoftSystemCLRTypesForSQLServer2012x64
10:07:46:MicrosoftSQLServer2012TransactSQLScriptDom
10:07:46:MicrosoftSQLServer2012DataTierAppFramework
10:07:46:MicrosoftSQLServer2012ManagementObjectsx64
10:07:46:VMMServer
10:07:46:VMMAdministratorConsole
10:07:46:FinalConfiguration
10:07:46:Done adding DataItems
10:07:47:Adding Page SwitchPage
10:07:47:Enter Microsoft.VirtualManager.Setup.SwitchPage
10:07:47:Adding Page BlockPage
10:07:47:Adding Page ProgressPage
10:07:47:Adding Page FinishPage
10:07:47:Adding Page InitialInstallStartPageSwitch
10:07:47:Adding Page EulaPage
10:07:47:Adding Page ComponentsPage
10:07:47:Adding Page CeipPage
10:07:47:Adding Page CeipPageForAdminConsole
10:07:47:Adding Page RegistrationPage
10:07:48:Adding Page MicrosoftUpdatePage
10:07:48:Adding Page InstallationLocationPage
10:07:48:Adding Page PrerequisitesProgressPage
10:07:48:Adding Page AdditionalPrerequisitesPage
10:07:48:Adding Page SelectDatabaseServerPage
10:07:48:Adding Page ClusterConfigPage
10:07:48:Adding Page AccountConfigurationPage
10:07:48:Adding Page PortConfigurationPage
10:07:48:Adding Page WebPortalConfigurationPage
10:07:48:Adding Page LibraryConfigurationPage
10:07:48:Adding Page UpgradeInformationPage
10:07:49:Adding Page ReadyToInstallPage
10:07:49:Adding Page ARPStartPageSwitch
10:07:49:Adding Page ARPAddRemovePage
10:07:49:Adding Page ARPAddRemoveComponentsPage
10:07:49:Adding Page ARPRemoveDatabasePage
10:07:49:Adding Page ConfigInitialInstallStartPageSwitch
10:07:49:Adding Page ConfigRegistrationPage
10:07:49:Adding Page ConfigEulaPage
10:07:49:Adding Page ConfigCeipPage
10:07:49:Adding Page ConfigMicrosoftUpdatePage
10:07:49:Adding Page ConfigSelectDatabaseServerPage
10:07:49:Adding Page ConfigAccountConfigurationPage
10:07:49:Adding Page ConfigLibraryConfigurationPage
10:07:49:Adding Page ConfigReadyToInstallPage
10:07:49:Adding Page UpgradeStartPageSwitch
10:07:49:Adding Page UpgradeComponentsPage
10:07:49:Exit Microsoft.VirtualManager.Setup.SwitchPage
10:07:49:ForwardFromSwitchPageHandler: Moving to page ARPStartPageSwitch
10:07:49:Enter Microsoft.VirtualManager.Setup.StartPage
10:07:49:Exit Microsoft.VirtualManager.Setup.StartPage
10:07:49:Enter Microsoft.VirtualManager.Setup.AddRemovePage
10:07:51:Exit Microsoft.VirtualManager.Setup.AddRemovePage
10:07:51:ForwardToPageBasedOnPropertyValueHandler: Property bag entry for AddRemoveMode is 2. This means that we will move to a next page id ARPAddRemoveComponentsPage.
10:08:30:Enter Microsoft.VirtualManager.Setup.AddRemoveComponentsPage
10:08:39:RationalizeComponents: We are doing a full uninstall of all components that are currently installed.
10:08:39:Exit Microsoft.VirtualManager.Setup.AddRemoveComponentsPage
10:08:39:ForwardFromAddRemoveComponentsPageHandler: Move to Remove Database Page
10:08:39:Enter Microsoft.VirtualManager.Setup.RemoveDatabasePage
10:08:42:Uncaught Exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: "SqlMachineName" ist leer oder hat mehr als 255 Zeichen.
Geben Sie einen gültigen Wert ein, und wiederholen Sie den Vorgang.
10:08:42:StackTrace: bei Microsoft.VirtualManager.Setup.SqlMachineName.Validate(Object newInputValue)
bei Microsoft.VirtualManager.Setup.InputParameter.SetInputValue(Object inputValue)
bei Microsoft.VirtualManager.Setup.RemoveDatabasePage.ExitPage()
bei Microsoft.VirtualManager.SetupFramework.PageNavigation.NavigateToPage(Navigation navigation, String jumpPage, Boolean shouldValidate)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
bei System.Windows.Controls.Button.OnClick()
bei System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
bei System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
bei System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
bei System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
bei System.Windows.Input.InputManager.ProcessStagingArea()
bei System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
bei System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
bei System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
bei System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
bei MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
bei System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
bei MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
bei MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
bei System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
bei System.Windows.Application.RunInternal(Window window)
bei System.Windows.Application.Run()
bei Microsoft.VirtualManager.Setup.Program.Main()
10:08:42:Application Ended
10:08:42:Failed
10:08:42:Property Bag Values:
10:08:42:SetupStartTime = 31.07.2014 10:07:42
10:08:42:POSTINSTALL = 1
10:08:42:DefaultLogPath = C:\ProgramData\VMMLogs
10:08:42:DefaultLogName = C:\ProgramData\VMMLogs\SetupWizard.log
10:08:42:setupexepath = C:\Users\Administrator\AppData\Local\Temp\2\VME0CD.tmp\Setup
10:08:42:ArchitectureIs64Check = True
10:08:42:OperationSystemIs2k12OrLater = True
10:08:42:SetupUserAccount =
10:08:42:UserName = Windows-Benutzer
10:08:42:CompanyName =
10:08:42:ProductKey =
10:08:42:ProgramFiles = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:08:42:IntegratedInstallSource =
10:08:42:CreateNewSqlDatabase = True
10:08:42:RetainSqlDatabase =
10:08:42:ForceHAVMMUninstall =
10:08:42:SqlServerPort = 0
10:08:42:SqlInstanceName =
10:08:42:SqlDatabaseName = VirtualManagerDB
10:08:42:RemoteDatabaseImpersonation = False
10:08:42:SqlMachineName = VW-SRV
10:08:42:SqlDBAdminName =
10:08:42:SqlDBAdminPassword =
10:08:42:SqlDBAdminDomain =
10:08:42:SqlDataFileLocation =
10:08:42:SqlLogFileLocation =
10:08:42:IndigoTcpPort = 8100
10:08:42:IndigoHTTPSPort = 8101
10:08:42:IndigoNETTCPPort = 8102
10:08:42:IndigoHTTPPort = 8103
10:08:42:WSManTcpPort = 5985
10:08:42:BitsTcpPort = 443
10:08:42:VmmServerName =
10:08:43:CreateNewLibraryShare = True
10:08:43:LibraryShareName = MSSCVMMLibrary
10:08:43:LibrarySharePath = C:\ProgramData\Virtual Machine Manager Library Files
10:08:43:LibraryShareDescription = VMM-Bibliotheksfreigabe
10:08:43:SQMOptIn = False
10:08:43:MUOptIn = False
10:08:43:VmmServiceLocalAccount = True
10:08:43:VmmServiceDomain =
10:08:43:VmmServiceUserName =
10:08:43:VmmServiceUserPassword =
10:08:43:TopContainerName =
10:08:43:HighlyAvailable = False
10:08:43:HighlyAvailable2ndNode = False
10:08:43:VMMStaticIPAddress =
10:08:43:Upgrade =
10:08:43:InstallationLocation = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:08:43:LocationOfSetupFiles = E:\amd64\setup
10:08:43:SERVER-VERSION = 1
10:08:43:BackupSqlDatabase = True
10:08:43:ScreensLoaded = 1
10:08:43:uninstall = 1
10:08:43:AddRemoveMode = 1
10:08:43:SERVER = 1
10:08:43:Collection LISTOFCOMPONENTSSELECTEDFORINSTALLING (System.Collections.ArrayList):
10:08:44: [0] = SERVER
10:08:44:fulluninstall = 1
10:08:44:PangaeaServer = 1
10:08:44:ARPComponentsNextPage = 0
10:08:44:End of list Property Bag Values.
10:08:44:
2014-07-31T10:08:44.5140408+02:00 Always:
Trace Session Ended -
I have created a virtual directory "myVirtualFile" virtual path is "\myVirtualFile" and I have given physical path as "D:\Home\myProject\Files"
Below is my code
var virtualpath="/myVirtualFile\UserManual";
var resultPath=Server.MapPath(virtualpath);
out put is resultPath contains "D:\Home\myProject\Web\client\myVirtualFile\UserManual" Expected out put is "D:\Home\myProject\Files".
It returns the folder structure of my project. I didn't return the physical path which I mentioned in virtual directory.Hi,
I am not expert on Asp.Net. But I will try my best.
The following sample is what are
Virtual paths and Physical paths
ASP.NET the "~" tilde indicates the root of a virtual path.
Virtual paths
~/App_Data/Sample.xml
~/
~/Map.txt
Physical paths
C:\Website\Files\Sample.xml
C:\Website\Default.aspx
C:\Website\Map.txt
Server.MapPath doesn't find automatically where a file is. It allows to get the physical path
corresponding to a virtual path (relative to the current request if you don't give an absolute path)
If above still cannot resolve your issue, please repost in Asp.Net forum, The link as above posted.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Virtual server is already managed by another virtual server pool
I was trying to register a server to a server pool on OEM 10.2.0.5 console, on the first try it never completed the registration, it errored out. After doing 'clear operation error' I try to register the same server, Now I get "virtual server is already managed by another virtual server pool". Does any one ran into similar situation? How do I clear this? Thank you.
user589547 wrote:
I was trying to register a server to a server pool on OEM 10.2.0.5 console, on the first try it never completed the registration, it errored out. After doing 'clear operation error' I try to register the same server, Now I get "virtual server is already managed by another virtual server pool". Does any one ran into similar situation? How do I clear this? Thank you.It's fairly simple to clear. First, stop the ovs-agent on the server:
# service ovs-agent stopThen, remove the local ovs-agent database:
# rm -rf /etc/ovs-agent/db Then, start the agent again:
# service ovs-agent startThe agent will now be reset back to an unconfigured state. -
The connection to Virtual Machine Manager Server [..] was lost.
Hello, I'm asking for help.
I got this error with these logs:
The System Center Virtual Machine Manager service terminated unexpectedly. It has done 3 time(s).
Event id 7034
Have anyone had such problems?
Looking forward for help. Thank youPlease review the eventlog: Application and Services Logs > Microsoft > Virtual Machine Manager > Server
This should give you an insight why Virtual Machine Manager is crashing.
Alternately you can enable Debug logging for Virtual Machine Manager to get more information.
Please see: http://support.microsoft.com/kb/2913445/ -
Converting physical servers to hyper-v hosts
Hi,
Can we
We are running windows hyper-v server 2012 R2 and having many VM's running on the hypervisor. we would like to convert few of our physical machines to virtual.
how do we convert a physical sever to hyper-v virtual machine ?
what factors should we take into consideration?
which tools should we use to accomplish this task ? could you please provide any document or links for the same.
Thanks.Is SCVMM 2012 SP1 a free tool or do we need buy the license ?
NO, it;s not free.
Where do we need to install the SCVMM ?
You can install to VM.
can we install it on any computer on the network or it should be on any of the specific machine ?
System Requirements for System Center 2012 - Virtual Machine Manager
SCVMM 2012 R2 – QuickStart deployment guide
is there any option in Hyper-V VMM to convert P2V?
NO
You can try
Using Disk2VHD for Hyper-V P2V (Physical to Virtual) Conversions
How to perform a P2V in a SCVMM 2012 R2 environment
How to clone physical machine into Hyper-V 2012
Have a nice day !!! -
The Cluster not failover when i shutdown one managed server?
Hello, I created one cluster whit two managed servers, and deployed an application across the cluster, but the weblogic server gave me two url and two different port for access to this application.
http://server1:7003/App_name
http://server1:7005/App_name
When I shutdown immediate one managed server i lost the connection whit the application from this managed server, My question is, the failover and de load balancer not work, why??
Why two diferent address?
thank any helpWell you have two different addresses (URL) because those are two physical managed servers. By creating a cluster you are not automatically going to have a virtual address (URL) that will load balance requests for that application between those two managed servers.
If you want one URL to access this application, you will have to have some kind of web server in front of your WebLogic. You can install and configure Oracle HTTP Server to route requests to WebLogic cluster. Refer this:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/intro_ohs.htm#i1008837
And this for details on how to configure mod_wl_ohs to route requests from OHS to WLS:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/under_mods.htm#BABGCGHJ
Hope this helps.
Thanks
Shail -
Weblogic managed server crash and automatic restart on Solaris SPARC platform
hi Everyone,
We are facing a problem a problem with Weblogic managed server where the managed server crashes and automatically restarts (via nodemanager) on Solaris SPARC platform.
The system info is as below:
OS: Oracle Solaris 11.1 SPARC
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Assembled 19 September 2012
uname:SunOS 5.11 11.1 sun4v
(T2 libthread)
rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
load average:1.04 0.52 0.32
CPU:total 4 v9, popc, vis1, vis2, vis3, blk_init, cbcond, sun4v, niagara_plus
Memory: 8k page, physical 16777216k(5930008k free)
vm_info: Java HotSpot(TM) 64-Bit Server VM (23.25-b01) for solaris-sparc JRE (1.7.0_25-b11), built on May 15 2013 04:30:17 by "" with Sun Studio 12u1
The pstack output of analyzing the core file is as below (for the particular thread, I can attach the entire output of pstack if required):
--- called from signal handler with signal 11 (SIGSEGV) ---
ffffffff7ec1a7c4 memcpy%sun4v-hwcap3 (103d34720, 10a7e7710, 108ae1060, 6300, 0, ffffffff5f66394b) + 990
ffffffff36102fa4 ZIP_GetEntry (103d34720, ffffffff636f66a4, bd, 103d347f0, a26f1c, 2f) + e4
ffffffff36103440 Java_java_util_zip_ZipFile_getEntry (2b, ffffffff636f66a4, 103d34720, ffffffff636f6b70, 2b, 1) + a8
ffffffff7586ac1c * *java/util/zip/ZipFile.getEntry(J[BZ)J [compiled]
ffffffff75b61b58 * *java/util/zip/ZipFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry; [compiled] +39 (line 606)
ffffffff75b61b58 * *java/util/jar/JarFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry;+3 (line 452)
ffffffff75b61b58 * *weblogic/utils/classloaders/ZipClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+36 (line 75)
ffffffff75b6eb84 * *weblogic/utils/classloaders/JarClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +6 (line 100)
ffffffff75a40938 * *weblogic/utils/classloaders/AbstractClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +74 (line 58)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/application/utils/CompositeWebAppFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+5 (line 176)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/utils/classloaders/CodeGenClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+43 (line 48)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findLocalClass(Ljava/lang/String;)Ljava/lang/Class;+87 (line 571)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+117 (line 515)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+60 (line 121)
ffffffff75a465c8 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class; [compiled] +71 (line 836)
ffffffff75db42c0 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class; [compiled] +4 (line 714)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+2 (line 358)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+27 (line 83)
ffffffff7580024c * StubRoutines (1)
ffffffff3691f44c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (ffffffff636f7f98, 10234f000, 2, c, 2, 10) + 2f4
ffffffff36e546c0 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_pnGSymbol_63pnGThread__v_ (ffffffff636f7f98, 1013e7748, 10234f000, 10011bf30, 100119ec0, 772d4ec08) + 1b8
ffffffff3725bf0c __1cQSystemDictionaryTload_instance_class6FpnGSymbol_nGHandle_pnGThread__nTinstanceKlassHandle__ (105cb6100, 1013e7978, 10234f000, 102b6e500, 0, 1013e7748) + 494
ffffffff3725a028 __1cQSystemDictionarybEresolve_instance_class_or_null6FpnGSymbol_nGHandle_3pnGThread__pnMklassOopDesc__ (105cb6100, 19dc00, 70, 10234f000, 70, 1013e7700) + ae0
ffffffff37257800 __1cQSystemDictionaryPresolve_or_fail6FpnGSymbol_nGHandle_3bpnGThread__pnMklassOopDesc__ (105cb6100, 1013e76f0, 1013e76f8, 1, 10234f000, 1) + 290
ffffffff368ba9dc __1cTconstantPoolOopDescNklass_at_impl6FnSconstantPoolHandle_ipnGThread__pnMklassOopDesc__ (10201b6e0, 1013e7978, 10234f000, 10201b6e0, 783cfb098, ffffffff37588000) + 264
ffffffff36937380 __1cSInterpreterRuntimeE_new6FpnKJavaThread_pnTconstantPoolOopDesc_i_v_ (10234f000, 77548b730, 49, 10201b6e0, 1013e76e8, 10234f000) + b8
ffffffff7581ab58 * com/jdedwards/base/logging/log4j/JdeLogger.warn(ILjava/lang/String;Ljava/lang/String;Ljava/lang/Object;Ljava/lang/Throwable;)V+14
ffffffff75807bcc * com/jdedwards/system/security/proxy/SecurityServerProxyImpl.install(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/proxy/SecurityServerProxyImpl;+30
ffffffff75806d10 * com/jdedwards/system/security/proxy/SecurityServerProxyFactory.create(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/SecurityServer;+1
ffffffff75807898 * com/jdedwards/system/security/SecurityServerInstance.getInstance()Lcom/jdedwards/system/security/SecurityServer;+27
ffffffff75806d10 * com/jdedwards/mgmt/security/UserManager.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+59
ffffffff75806b24 * com/jdedwards/mgmt/security/UserManagerImpl.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+5
ffffffff75806b24 * com/jdedwards/mgmt/security/SCFLoginModule.login()Z+481
The output of the hs_err_pid1127.log file is as below:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xffffffff7ec1a544, pid=1127, tid=20
# JRE version: 7.0_25-b11
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode solaris-sparc compressed oops)
# Problematic frame:
# C [libc.so.1+0x11a544] memcpy%sun4v-hwcap3+0x710
# Core dump written. Default location: /slot/ems9437/appmgr/Oracle/Middleware/user_projects/domains/smc_domain/core or core.1127
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x000000010294d000): JavaThread "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_in_native, id=20, stack(0xffffffff62f00000,0xffffffff63000000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xffffffff5f6ce000
I ran the suspect code which i believed was causing the issue as a standalone Java program using the same Java executable and it worked fine without any crash.
Appreciate any inputs / discussion / feedback / thoughts on this topic.
Good day.I just wanted to throw in one more thought. I have also seen that there is a restart=true parameter. Maybe if we set this to true, and just issue the command to shut down the server in the script, the managed server will restart on its own.
Would greatly appreciate any advice! -
SCVMM 2012: Unable to connect to the VMM management server localhost:8100
Hi everyone
I have difficulties connecting with the Admin UI to the SCVMM server running on the same machine. This is the error message I see:
Unable to connect to the VMM management server localhost. The Virtual Machine Manager service on that server did not respond.
Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running.
Then try to connect again. If the problem persists, restart the Virtual Machine Manager service.
ID: 1602
I checked that the service is running and checked with the Resource Monitor that vmmservice.exe is really listening on port 8100. The Resource Monitor also shows some traffic between itself, the service and the DC. But all traffic dies down after a few seconds,
then nothing happens for a minute, then I get the above error message. The only SCVMM related entry in the eventlog is this (was logged when I manually tried restarting the service):
Failed to stop service. System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStop()
at System.ServiceProcess.ServiceBase.DeferredStop()
But I guess that entry is of no help. Other important things that might be relevant:
This installation worked fine three months ago. Since then only the automatic updates were installed.
DPM (the 2012 CTP for Win8) is installed on the same server.
After it didn't work I installed SQL Server 2008 R2 SP1 (offered by Microsoft Update)
SCVMM is part of a small test installation (~10 VMs or so), no valuable data, so there's no risk when messing around
Control panel shows the version number 3.1.1042.0 for "Microsoft System Center 2012 Virtual Machine Manager".
Is there anything else I could try? How can SCVMM stop to work, all by itself? Leaves a sour taste...
Cheers,
SimonWhen such odd behaviour occur, it is a good tip to start a VMM trace to see where things are actually going wrong. And suck files is interestin for MS support once the obvious things for errors, are eliminated out of the picture.
VMM has dependencies such as SQL, permissions and service accounts. All of these variables does
also have dependencies that should be verified. Verify that the account for the service does is not locked/expired pwd, that the SQL is up and running - and actually is working. There is a lot of logs to check in order to determine the root cause of
this behaviour.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
RobHello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl -
Hi
I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
"[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
Please suggest me workaround to resolve this issue,
thanks in advance
Pavan
bi_server1.log
==========
####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
Listen Address :9704
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
EPM_ORACLE_INSTANCE = novalue
EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
com.ibm.cpu.endian = big
com.ibm.oti.configuration = scar
com.ibm.oti.jcl.build = 20110622_1654
com.ibm.oti.shared.enabled = false
com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
com.ibm.oti.vm.library.version = 24
com.ibm.vm.bitmode = 64
common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
epm.useApplicationContextId = false
file.encoding = utf-8
file.separator = /
hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
ibm.signalhandling.rs = false
ibm.signalhandling.sigchain = true
ibm.signalhandling.sigint = true
ibm.system.encoding = ISO8859-1
igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
java.assistive = ON
java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.print.PSPrinterJob
java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
java.class.version = 50.0
java.compiler = j9jit24
java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
java.ext.dirs = /usr/java6_64/jre/lib/ext
java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.home = /usr/java6_64/jre
java.io.tmpdir = /tmp/
java.jcl.version = 20110530_01
java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
java.vendor = IBM Corporation
java.vendor.url = http://www.ibm.com/
java.version = 1.6.0
java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.vm.name = IBM J9 VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = IBM Corporation
java.vm.version = 2.4
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
jrf.version = 11.1.1
jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
jxe.current.romimage.version = 15
jxe.lowest.romimage.version = 15
oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
oracle.core.ojdl.logging.componentId = bi_server1
oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
oracle.deployed.app.ext = /-
oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
oracle.notification.filewatching.interval = 2000
oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = ppc64
os.encoding = ISO8859-1
os.name = AIX
os.version = 6.1
path.separator = :
platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
rtd.instanceName = RTD_bi_server1
server.group = obi
sun.arch.data.model = 64
sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
sun.io.unicode.encoding = UnicodeBig
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = ISO8859-1
user.country = US
user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
user.home = /home/orabi
user.language = en
user.name = orabi
user.timezone = Asia/Riyadh
vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
weblogic.MaxMessageSize = 50000000
weblogic.Name = bi_server1
weblogic.ProductionModeEnabled = true
weblogic.ReverseDNSAllowed = false
weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
weblogic.jdbc.remoteEnabled = false
weblogic.management.clearTextCredentialAccessEnabled = ********
weblogic.management.discover = false
weblogic.management.server = http://10.11.34.111:7001
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.enableJSSE = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
wlw.iterativeDev = false
wlw.logErrorsToConsole = false
wlw.testConsole = false
xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13Hi,
I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
But each time I got the same exception.
Korandla -
The Oracle MapViewer brings the WebLogic Managed Server to crash
Problem Description: The Oracle MapViewer brings the WebLogic Managed Server to crash, when we call a GetMap-Request with wrong Coordinates.
This was found out for the SRS=EPSG:25833. Example:
http://igdb-qm-svra1.blva.bayern.de:8080/mapviewer/wms?
REQUEST=getMap&
Version=1.1.1&
LAYERS=&
FORMAT=image/png&
TRANSPARENT=false&
STYLES=&
Datasource=igvert_alkis_wms&
basemap=AT_WMS_TN-KOMPLETT&
SRS=EPSG:25833&
BBOX=3.32358690717E7,5529425.0143,3.32369088846E7,5530464.8272&
WIDTH=500&
HEIGHT=500&
With the Enterprise Manager was also evaluated during and after a crash of Server the SQL-Statements.
If the SQL statements executed on the database itself, it takes a few seconds after a correct answer returns.
I know that have the look for the EPSG coordinate as follows:
BBOX=235869.071700,5529425.014300,236908.884600,5530464.827200&
My question therefore: Why are these coordinates by the Oracle MapViewer approved and not caught? An Request with incorrect
coordinates goes into a StuckThreads and then the ManagedServer crashed.
In the appendix you will find the evaluation of the Enterprise Manager.
I have tested the request with two different versions of Oracle MapViewer (Ver11_1_1_5_B110527 and Ver11_B100426). In both the same problem occurs on.
I have also filed an SR.
Best Regards
KerstinHi,
Can you confirm that you're trying to setup a managed server on another machine using the pack/unpack commands ?
You might to want to take a look at that post.
Clustering of 2 Physical server
Hope that helps !
Regards
Maybe you are looking for
-
Display of iPod Touch 5 is not Finger print resistant
Hi all, I am already in love with my iPod Touch 5. I read in the specs that it has oleophobic coating by which the finger prints on the screen could be avoided. But I still could see the finger prints. Did I understand t
-
Can not open pdfs w/adobe reader for android on archos 10i tablet?
I can not open pdfs w/adobe reader for android on archos 10i tablet? How to fix it?
-
Return more than one row to display as text?
I don't know if this is possible or not. I'd rather not create a report for one item. is there a way to allow a display as text filed show more than one item from a query? I've tryed several things none work. I have one field that I'd like to show mu
-
HiGuys We are facing issue in authenticating guest user via web authentication on WiSM.We have WiSM with 270 APs. We have guest ssid with web-auth enabled.we are running 4.2.061 code. It was working fine till last week, now suddenly it keeps getting
-
Syncronization problem using Office 365 with Outlook 2013
Hi I have a problem with my Outlook 2013. On my Office computer, I am using a Mac Computer and I have my gail account on it. On my Laptop I have Windows 8.1 and Office 2013. I have my POP account configured and I am able to send and receive e-mail, b