Convert Quicktime files or FC Pro projects to Flash files for the internet

I've never done this before. I have finished FC Pro projects that I need to convert to flash files for the internet. Am I saying that right? I've converted them to QT files. What's next? Thanks

This site and the readme links and forum can help you display it on the web, works great with Flash or H.264.
http://www.jeroenwijering.com/?item=JWMediaPlayer

Similar Messages

How do i transfer music files from itunes to an external flash drive for the car

I would like to listen to my music from itunes in the car, how do I transfer files to a usb flash drive?

Open iTunes, go to the music library, highlight the files you want to transfer and right-click and Copy. Minimize iTunes and right click your flash drive, Paste. Should copy the files to the flash drive.

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

If the Mac's firmware was updated, you can try this Internet Recovery:
Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
If the firmware was not updated, then you can use the SL install disk.

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

Creating a project in Flex Builder for the Hybrid Store sample Application

Hi all,
How to create a project in Flexbuilder for the hybrid store
sample application.
I downloaded the source code of hybridstore application,
Now i have to create a project for it to run that application
in my system,
will you please tell me how to create a project for this
sample.
I have also read the readme.html file. but i could not follow
exactly what they are saying.
what i did is, I unzipped the source code into a folder
hybridstore.
I opened the flexbuilder : File -- new -- flexproject ( i
have selected) then i have given name to my file (hybridstore) ,
and set the path to the hybridstore folder where the source code
exists.
but it as created hybridstore.mxml file also.
it is not working.
will you please till me how to create project for this
application.
I have created project for other samples like restaurent
finder, dashboard. they are working fine.
I got problem with this sample only.
Thanks in advance
Regards
Avanthika

Hi,
thanks for your reply,
I have tried to open using file import, but still it is not
working.
in the readme file for this application , contains how to
Creating a project in Flex Builder for the Hybrid Store
application:
Name your default application catalog.mxml.
Prevent Flex Builder from generating an HTML wrapper: select
Project > Properties. Select the Flex Compiler page, deselect
the Generate HTML wrapper file option .
Create a Run configuration for your project but deselect the
Use defaults option and instead assign the Run setting to the
hybridstore.html in your project's bin directory.
To enable debugging of the Hybrid Store application you must
create a copy of hybridstore.html. Open it in an editor (you can
right-click on the file and select Open With > Text Editor).
Find the line that says "src", "catalog" and change it to "src",
"catalog-debug". Assign the Debug setting to this new HTML file.
As i am new to flex , i could not know how to do this.
please help me how to do this.
regards
Avanthika

On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

Is there any other way to buy pro apps like logic pro x or final cut pro x without downloading straight from the internet?

Hi,
Just straigt to the issue, I'm not really sure with my internet connection in my country. I mean its so slow and sometimes it disconnects and reconnect. So I'm not trusting the internet connection here to download such a big software like Logic Pro x or Final Cut Pro x. So is there any way for me to buy the pro apps without downloading straight from the internet? I mean like the oldschool method, come with a box. I bought Logic pro 7 and 8 like that and has no problem with it. But now apple selling all the pro apps from the app store, its cool and easy but im afraid if i bought it online and im pretty sure i will encounter problems during the download period. It might took me like a week or more maybe to download 40GB file, i dont know. And more over, what if my internet connection cut off while i download the software?
So please do help me with this. I would love to have Logic Pro X on my apple computer.
Thanks.

ahavu wrote:
And to my knowledge I can't sort of 'drag and drop' the clips from the sealed Final Cut event files either.
The events are not "sealed". Your clips – if you copied rather than leaving in place – are in the Original Media folder. If you used 10.1.x, you right click on the library bundle and choose Show Package Contents. In early versions, just open the event folder.
There are multiple ways to get media on ones' computer. One way is to use a card reader and copy the entire card structure to whatever destination is used for a media drive. Then import into the NLE.
I don't have any experience with Hitfilm but I assume their user forums would be a good place to get an understanding of what workflows work best for that application.
Good luck.
Russ

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

My macbook pro retina 2014 has crashed for the 2nd time in 2 mo

My macbook pro retina 2014 has crashed for the 2nd time in 2 months. Can't get past the gray/apple screen. The first time the genius bar tried all the different tricks to get it to boot all the way through, but in the end had to reinstall mavericks. They said there weren't any indications of it being a hardware issue after running diagnostics. The only possible reason is that it has something to do with some ProTools 10 plugins which I had downloaded in both occasions less than a week before. I don't believe that would be the issue and I'm guessing it's a hardware issue at this point. It's still under a factory warranty, so I'm not too concerned. Thoughts?

Try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
If no success, try booting into the recovery partition and select Disk Utility from the 4 option menu.
Run Disk Utility>First Aid, Verify and Repair.
Any Change?
Ciao.

I want to buy MacBook pro but I'm wandering for the keyboard could Mac's shop change the keyboard into Arabic keyboard. I want to buy 2 laptops . I have friends in USA and they visited Apple store and they asked about change the keyboard and they said Ok

I want to buy MacBook pro but I'm wandering for the keyboard could Mac's shop change the keyboard into Arabic keyboard. I want to buy 2 laptops . I have friends in USA and they visited Apple store and they asked about change the keyboard and they said Ok (the Apple store) so, I don't know about Australia store
I'm student and my une (university of New England ) give me 10% discount for each. Thanks

alifromarmidale wrote:
I need the keyboard English with Arabic. Thanks
These are user to user technical assistance forums, and nobody here represents Apple or any store. In order to find out whether you can buy something at a particular store, you really need to find some way to contact the store directly.

I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM. CAN YOU USE A EXSTERNAL CD ROAM ON A MAC?

I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM? CAN YOU USE AN EXSTERNAL CD ROAM WITH A MAC?

Apple will gladly sell you a color coordinated and texture matching external SuperDrive to go with your Retina'ized MBP for about $80 bucks.
Note that those models are completely sealed with no serviceable or upgradeable parts inside. So if you decide to bite the bullet, be sure to customize its guts to your heart's content from the get-go as no further change will be possible. This means CPU speed, amount of RAM and size of the solid state drive. Other external options, like the Superdrive, can be added later.

Error creating AIR file: Unable to build a valid certificate chain for the signer.

Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steve

To manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

A macbook pro g4 would be compatible for the boot camp

a macbook pro g4 would be compatible for the boot camp

I think it depends on the OSX version. Leopard (10.5) has the first bootcamp software and is compatible with a G4 most of the time. The problem is that you cannot install windows on a G4. You would probably have to bootcamp linux or something like that. A non- intel mac will not allow you to install windows via bootcamp. Only a VM solution compatible with the G4 could allow you to run XP as a virtual machine. It would be far slower than a bootcamp install.

I have an Apple Retina Pro Notebook and am looking for the most highly recommended compatible wireless printer. Do you have any recommendations?

I have an Apple Retina Pro Notebook and am looking for the best compatible wireless printer to use with it. Do you have any recommendations?

"WiFi Wireless Printer" seems to give Users the feeling that they somehow print directly from their computer to the Printer. That is NOT how it works.
To make a WiFi Wireless Printer work, you need to make it a participant on your network, by providing the Network_name and the Password. It then becomes a peer of your MacBook on your home Network, and you can create a Print Queue for it in Add-a-Printer.
There is no particular advantage to this over, say, an Ethernet Printer -- except that you don't have a Physical cable to string.

Convert Quicktime files or FC Pro projects to Flash files for the internet

Similar Messages

Maybe you are looking for