Convert SATA 3 Gb/s to 6 Gb/s for internal hard drives

I want to install SATA 6 Gb/s internal hard drives.  Is there a way to convert, replace, or supplement  my original internal SATA 3 Gb/s hard drive controller with a SATA 6 Gb/s controller?

Only if you found a PCI-e card.  The onboard controller is wired to the motherboard.  However, most 6 Gb/s drives should work seamlessly on a 3 Gb/s system.

Similar Messages

  • On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    That is correct. The tech specs indicate:
    Hard Drive Interface
    6.0 Gbps Serial ATA (SATA)
    Optical Drive Interface
    3.0 or 6.0 Gbps Serial ATA (SATA)

  • I have a late 2011 mac book pro and I'm wondering if it uses SATA II or SATA III for the hard drive? Which eventually I'm going to replace with a SSD.

    I was wondering if the late 2011 macbook pro uses SATA II or SATA III for the hard drive. The reseason I'm asking this is because some day I'm going to replace the Hard drive for a SSD drive down the road and would like to use all the performance of the SATA controler.

    SATA III.

  • How to Install Hitachi SATA Deskstar Internal Hard Drive?

    I just purchased HITACHI SATA Deskstar 3/5" 500GB/16MB Cache/72RPM Internal Hard Drive, which said it was compatible with my Mac. I have a iMac mid 2007 2.4 GHz Intel Core Duo2 running OSx10.6.4. Is this a simple install or do you recommend I take it into repair? Any suggestions would be welcome, I am a bit of a novice.

    Thanks for the feedback. BTW, you might want to roll your own ext HD. I did this one in April when I got the 27":
    Macally GS350SUAB Hi-Speed eSATA/1394A/1394B/USB2.0 Storage Enclosure for 3.5inch SATA HDD
    Hitachi 1 TB Deskstar SATA 7200 RPM 32 MB Cache Internal Hard Drive HD31000 IDK/7K
    Search around Amazon and you'll probably come up with larger HDs to put into it.

  • Will a Samsung HN-M101MBB 1TB 5400rpm SATA 2.5 inch Internal Hard Drive work in my late 2008 silver macbook

    will a Samsung HN-M101MBB 1TB 5400rpm SATA 2.5 inch Internal Hard Drive work in my 13-inch, Aluminum, Late 2008 macbook.

    Dimensions (WxDxH): 69.75 x 100.3 x 9.5 mm
    Looks like this will fit then great thanks for the help

  • SATA power connector to internal hard drive

    I just installed a Firmtek Seritek 1eVE2+2 PCI card in my Quicksilver in order to install a 1TB SATA internal hard drive. The drive is a WD 1001FALS Caviar. The problem: The hard drive only accepts an SATA power connector and my Quicksilver only has ATA 4pin Molex power connectors. Did I get the wrong hard drive? Are there adaptors? Are there SATA connectors hidden in my Quicksilver? I've looked but have not seen anyone else with this problem. Please advise. Thanks.

    Hi-
    Don't worry.
    All you need is a 4 pin Molex to 15 pin SATA adapter, available at any PC parts store or online vendor.
    http://www.mcpb.com/html/sta.cbl06.pr.html
    If you get one with a 270º angle, it fits nicer when the door is closed.
    http://www.mcpb.com/html/sta.cbl08r.270.html
    I've looked but have not seen anyone else with this problem.
    http://discussions.apple.com/thread.jspa?threadID=1537619&tstart=5

  • Can I convert my internal hard drive to an external hard drive

    I have an 80 GB hard drive that was in my MacBook.  What do I have to do to convert it to an external hard drive?  Thanks

    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Hi, I have a mid 2009 macbook pro, and I'm looking to upgrade my internal hard drive with a 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s.

    But I keep hearing that my MBP will not support SATA III. Is that true?

    Welcome to Apple Support Communities
    Your MacBook doesn't support SATA III, so if you install a SATA III HDD, it will work with SATA II speeds.
    That hard drive should work. Also, 7200 rpm hard drives will give you extra performance

  • ATA internal hard drives and SATA hard drives?

    I've been searching through the posts and am starting to think I've got the oldest running Mac Mini!
    My Mac Mini is installed with a 40 gb ATA hard drive and I think I need to upgrade to a larger internal drive. Although 80-100 gig's would be enough (I have a 250 gig external Firewire drive, I would prefer to go to a 160-320 gig drive, but all of the drives I've found in that size range are SATA drives. From reading the posts I've found so far, it looks to me as if my Mac won't host an internal SATA drive. Can anyone confirm that for me? Am I stuck with ATA drives only? If I'm limited to ATA drives, does anyone know where I can find a large ATA drive suitable for my Mac Mini?
    I appreciate any help or advice anyone can offer.

    You are limited to ATA drives.
    [Here|http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=210&type=DataStorage&TI=0519&shoupgrds=ShowUpgrades] is a nice list from OWC.

  • My iPod reset itself and converted all of my music into files on the iPod's hard drive. How do I access them and get them back?

    I made the mistake of disconnecting my iPod from my computer without ejecting it and now all of my music, podcasts and other files are listed as "other" in the iPod summary section. I can't access the files outside of iTunes (when the iPod is just being used as an external hard drive), so I need to know if there's any kind of third party program or other technique I can use to get this stuff back.

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • New Convert to Mac.  Did Time Machine wipe out my external hard drive?

    I recently purchased a MacBook Pro. I have all of my files and pictures from my PC on my external hard drive. When I connected it to the USB port, Time Machine came up. I don't remember what I selected, but now when I plug in the drive, "time machine backups" is the only thing that I can see in Finder.
    When I tried to connect the hard drive with a PC, it doesn't recognize it anymore. Did I loose all of my data?

    Coyote_Girl wrote:
    I recently purchased a MacBook Pro. I have all of my files and pictures from my PC on my external hard drive. When I connected it to the USB port, Time Machine came up. I don't remember what I selected
    You saw this prompt (probably with only one volume name):
    |
    |
    and when you clicked +Use as Backup Disk,+ this:
    |
    |
    And when you clicked Erase, the drive was reformatted.
    Most of the data is still there, but it won't be quick, cheap, or easy to recover it. You'll need a +Data Recovery+ service or application.
    Since the drive was formatted for Windoze, the apps we recommend here, for Mac-formatted drives, probably won't work. But see [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html] for general information in this area.
    Check wherever you normally look for PC apps, or Google.

  • How do I convert the data on my internal hard drive to a new PC?

    My Macbook died but I have the internal hard drive taken out. How do I get that data onto my new PC?

    Use an USB enclosure for the drive's type; any large-enough computer store should carry these.
    (109875)

  • G5 not recognize sata 2.0 internal hard drive

    My Seagate 500 GB harddrive is failing and sometimes will not boot.   The Smart test using TechTools Pro 6.0 shows it passing all the tests but several test the marker is a third of the way toward fail.    This drive must have structure problems that I can't fix. 
    I purchased a new Western Digital Caviar HD   7200  2.0 Terabite hard drive.   The Mac Pro will not recognize the drive internally.   I formated it on a windows machine and the hooked it to my Mac Book Pro (Intell based) as an external drive.  I formated it and partitioned it under the Apple Partition standard rather than GUID per instructions on WD's website.   The Mac Book Pro and the Mac G5 both recognize the Caviar drive as an external drive but the G5 does not recognize the drive internally to install my operating system.  I reversed the other Time Machine drive to be sure there wasn't a wiring problem in the Hard Drive enclosure.   The Time Machine Harddrive (Hitachi 750 HD)  works in both.   
    I can not find if there is an issue of the size of the Hard Drive.  I'm using Leopard with the Power PC chip in the G5.  
    Any ideas ????
    Bill

    Again, I have spend several weeks working on the hard drive issue.   Neither the old hard drive nor the new replacement are recognized by the internal slot.   Both are recognized as external harddrives.  
    I had a second hard drive, Hitatchi, that I used Super Duper to clone the old Seagate.  It now seems to work.  I used Tech Tool Pro 6 to clean up the volume as much as I could.   The disk utility still finds some issues on SUID but I guess they are not the cause from other posts I have read concerning disk permissions.
    I reset the PRAM and SMU. 
    I am reluctant to buy a third hard drive if the internal board does not recognize the hard disk.  I have run the tests in Tech Tool Pro 6 but nothing is indicated as a problem.  
    Does anyone have a clue what is going on regarding hard drives and the Power Mac G5??
    PS  I used the external connection to do all the hard drive tests and optimization of the old Seagate 500 GB HD.  It seems to be ok and working fine.   The super duper clone was a pain because the program would frequently hang even though I was not using the power mac G5 to externally connect the two.  I used my Mac Book Pro to connect the external Seagate 500 HD to the Power mac G5 Hitatchi in Target mode.  It was a long drawn out process but it seems to have worked.   I just don't know if the Power Mac G5 is stable enough to spend more money on still another hard drive.

  • SATA Hard Drive no longer recognized by Mega 865

    I recently put together an MSI Mega 865 barebone system with the following specifications:  
    Processor: Intel 3.2c Ghz (Northwood core)
    Hard Drive:  Western Digital SATA 10kRPM Raptor
    Memory: 1 GB (2 x 512MB) Kingston 3200 (400Mhz)
    DVD Player: Plextor 8X DVD RW
    Video Card:  HIS Excalibure 9800Pro 128 MB
    OS:  WinXP
    Finally got everything up and running, and then I went to boot up, and the system can no longer find the SATA harddrive.  In fact, it's not even an option in the BIOS now.  
    My question is the following:  
    Would the SATA be available all of the time, or only if a SATA enabled harddrive was recognized?
    When the system is first powered on by plugging the power cord into the wall, the hard drive makes a small amount of noise, as if it's spinning a bit.  When the computer starts up, there is no noise at all, although the hard drive does get warm (which makes me think there is power to the unit).  
    I tried the 2nd power supply (old IDE) for the hard drive, but that provided that same results as the SATA power supply.
    There were some inconsistencies with my mega 865 prior to this.  First, the HIFI would randomly lock up, and the only way to get it back was to unplug the computer from the wall.  2nd, it had lost communication on the serial port (why, I don't know).  3rd, and final, it doesn't seem to recognize my hard drive (or my hard drive is ruined).
    Can someone help me out here, I'm not sure whether to return my HardDrive, my MSI Mega 865, or both.

    The system worked for 4 days or so.  One day, I started it up, and it couldn't boot because it couldn't detect the SATA drive.  When this happened I decided to flash it to the the latest BIOS, but even this did not help.
    The unit had problems before, it would lock up on initial power up, the HIFI/CD/DVD would not respond (when the computer was not on of course).  I would have to plug and unplug the unit 3 or 4 times before it would power on and not lock up.
    I contacted MSI support, and explained my problems.  They told me to return the unit to the reseller.  I'm not sure if the problem was the unit, the hard drive, or both, so I went ahead and returned the HD and the MSI unit.  It'll be another 2 weeks or so now before I get my computer up and running.  :(

  • My iMac G5 cannot detect my Seagate 160GB SATA II hard drive

    Hi,
    My mac is iMac G5 1.6G 17 inch with no iSight.
    Recently i buy a new Seagate 160GB SATT II(ST3160812AS) and try to replace with my old internal hard drive.
    First i use the SuperDupe! software to clone with my old HD.It works fine and can be read the data via a external SATA box.
    Then i shut down the Power and follow the instruction provied on the Apple web site to replace the HD.
    After i replace the HD and power on the mac, the display only show a gray backgrounp and the apple mark does not show up!
    I recheck the install and the data/power cable is well and connected.
    I use the Mac OS X install CD to run the disk utility and i found the cd-rom is the only device it found!
    I try to reset the PRAM and NVRAM, the problem still exists.
    I sent back the HD to the store for fix and they said the HD works fine on a PC!
    So, is there anything i missed to replace the new HD or the iMac just does not support a SATA II hard drive?
    Thanks a lot
    iMac G5 1.6G 17 inch Mac OS X (10.4.4) the new HD is Seagate Barracuda 7200.9 160G
    iMac G5 Mac OS X (10.4.2)

    So that I get this right, you cloned the internal OS X drive onto an external FW-SATA HDD using SuperDuper! ?
    There sounds like an issue that the iMac doesn't recognise the SATA II drive for some reason - would've thought it should do.
    A quick trawl through the knowledge base should reference any info that the iMac only supports SATA I for your revision, which I'm guessing is A.
    Just checked - as you should/could have - the iMac you have only accepts PATA drives. So you'll need to exchange or buy an ATA 6 HDD for your iMac to work, without booting from the external drive.

Maybe you are looking for