Convert select traditional or simplified chinese not working

After upgraded mountian lion,
convert select traditional or simplified chinese not working,
it works fine in lion.
Please help!
Thanks

Please use the search function about this. This has been discussed many times.

Similar Messages

Traditional and Simplified Chinese characters couldn't be displayed!

Hi all,
Recently I installed an Oracle 9i Database Server (9.0.1).
Problem regarding the globalization support issue was encountered after the installation of Oracle 9i Database Server. Parameters in NLS table had been checked that the language is initially set to AMERICAN, territory is set to AMERICA and the character set is UTF8.
Since traditional and simplified chinese characters must be required for the HK server, it is believed that the above parameters should be altered to TRADITIONAL CHINESE / SIMPLIFIED CHINESE, HONG KONG and ZHT16MSWIN950 / ZHS16CGB231280 respectively.
I tried to alter the NLS_DATABASE_PARAMETERS, but its not working; should the NLS_SESSION_PARAMETERS be changed instead? I also tried this one, changes is taken place but the chinese characters still couldn't be displayed, just bunches of 亂碼 (meaningless codes) instead.
Another piece of information is that the Oracle server is installed on the basis of Windows Server 2003 Standard Edition, should the Language for non-Unicode programs (which is in the Advanced page of the Regional and Language Settings) be configured to Chinese (HKSAR)? Various combinations, in terms of English (US), Chinese (HKSAR), Chinese (PRC), Chinese (Taiwan), had been taken turns to test for the results. However, same results happened.
Hence, how should we configure? Please advice us.
P.S.# It is known that this question should be placed in the "Globalization Support" forum, I have done that; however, it is hoped that I could seek more advice in here.
Thx in advance.
Karen

Karen,
Setting up such an environment requires some sophistication and know how. I would advise reading though the Globalization Support Guide and som of the papers on the Globalization Home Page http://www.oracle.com/technology/tech/globalization/index.html
before randomly attempting to change parameters. If your requirement is to store and retrieve both TRADITIONAL and SIMPLIFIED CHINESE then your database needs to be Unicode (UTF-8). Designing an application that allows you to easily access multilingual data requires careful design and planning. If you are simply trying to quickly display data you have in your database you might want to use iSQL*PLUS which is browser based and will allow you to display Unicode data. It might also be helpful to take a look at the following paper: http://www.oracle.com/technology/tech/globalization/pdf/globalization-best-practices.PDF

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

Drag n Drop selected Text from Safari, chrome not working on indesign CC

In CS6 If we drag drop any selected text from any app on layout it work but in indesign cc it is working only with some app like TextEdit, notes etc. I knew that very few people have such use case but same is also not working from one of my cocoa app.
while debugging if i drop content from TextEdit and Notes app on some sample app I found that TextEdit & Notes App registered for this Extra Pasteboard type "com.adobe.indesign-import-ustl" and "com.adobe.indesign-import-styl" where as chrome and safari are not. similarly my app is registered only for "NSPasteboardTypeString" type. Is this is the limitation or bug of indesign?

Similar bug(#3710667) was exist in CC before 9.2.2 update as you can see in release notes of 9.2.2(CC last update) here. before fix simple selected text drag & drop did not work from any application except TextEdit .I have also spent hours before this update to find out bug I used ClipBoardViewer sample App to find out current Drop flavour and its content it may help you and before fix I find some workAround first is add flavour in your drop which Indesign understand even if you are not adding any data for that flavour so that you start receiving couldAcceptType() and under this call parse your actual data from PasteBoard and remove all data from pasteBoard so that another next helper will not consume it. as you mention even after adding text flavour your couldAcceptType() not hit so may be this WorkAround not work for you but it worked for me.
second is just a finding i.e before doing drag and drop on indesign create one new document (from Indesign UI not programmatically ) save it on disk close it and reopen it after it every drag & drop will start working work .

How to download traditional and simplified Chinese fonts in PS? [was:Hello, is it possible]

to download traditional and simplified Chinese fonts and install them into Photoshop (if I can find a site that will allow me to download them)? Would I just download them and install them to my Windows font folder and Photoshop would display them under its font tool just like it would Times Roman, Verdana, etc?
Thank you.
Steve

Yes, fonts are handled by the system. Depending on what type of fonts you may however still need to change your system language and region settings to actually get access to them...
Mylenium

How do Traditional & Simplified Chinese labels work in Narrative Reports

Hi There,
I need to create a narrative report which will display the field labels in the language that the user has specified.
For instance, if the user's default language is Simplified Chinese, how can I set the narrative report to automatically translate the field labels?
Is there a way to do this as we have multiple users with different languages specified as their defaults.

I think for this you will have to go back to using iwork 09, which you should still have in Applications/iwork.
Ask Apple to restore the Chinese Conversion service in the new versions via
http://www.apple.com/feedback

Convert Sample Rate on Import- does not work

Setting: *"Automatically convert sample rate of imported audio"*
You'll want to set this if you have audio on your computer
that wasn't sampled at 44k. It prevents your imported audio from
sounding like Mickey Mouse drinking a gallon of espresso and inhaling helium.
HOWEVER...It does NOT work when you drag audio into the project from
Logic's internal File Browser.
Dragging audio into the project from Logic's Browser,
or browsing to the file in Logic's Browser and choosing to
"Add selected Files to Audio Bin",
will NOT convert to the audio's sample rate.
Sample rate of your audio is only converted if you do: "Import audio file",
then browse to the file(again) in a popup browser dialog, and then choose import.
If the audio is already in your Audio Bin, choosing "Convert File"
will bring up another Finder Dialog asking you where you want the
converted audio to be placed.
Now you'll have to Browse (yet again) to the song's folder, because that's where
you'll probably want it anyway, and choose to put
your converted audio into the song's folder.
Please realize: If a composer or producer wants his/her audio to sound like
Mickey Mouse on Helium and Espresso, he will do it after the fact, on purpose, using a plugin.
Is it too much to ask, to have this Setting do what it says it does, with ALL audio brought into the song?
No matter how I bring audio material into a Project, the sample rate should always conform
to the Project's sample rate.

Hi there
I've been using Captivate since version 1. And to be honest, I'm not sure I've ever seen the option work. If it does work, I'd also like to know under what conditions it works. Perhaps it only works with certain applications. I'm not sure. Largely I've ignored the option exists because I've never recorded anything where I wanted tooltips to be an option. I've never wanted to simulate to that detail.
You should probably consider filing a bug report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I am attempting to upload multiple photos on a macpro from a cd. I am used to a pc. I tried using the command button to select multiples but it does not work. Please advise

I am attempting to upload multiple photos on a mac pro from a cd. I have tried holding the "command"button down to select multiple photos but it does not work. Please advise. Thanks,John

why not sort by (name, date, etc) and Click on 1st and Shift-Click on last.
Might work better to copy or import to a project folder.
https://discussions.apple.com/community/ilife/iphoto
http://www.apple.com/support/iphoto

Google documents - 'select files to upload' does not work with v 3.6.8 Firefox - several users have noticed this.

Until Friday, I could upload documents using google's facility within Firefox . Suddenly, the 'select files to upload' stopped working. Internet Explorer does this ok.
I noticed on the Google forum that several users have reported this and someone suggested it should be reported to Firefox as it works with other browsers. I am using Windows XP on a laptop.

It is an issue that Google are aware of and are working on a solution. See [http://www.google.com/support/forum/p/Google+Docs/thread?tid=4f0369bdcf6fd7ff&hl=en "Select files to upload" not working in Firefox - Google Docs Help]
(Thanks to Joolsa for the link)

Combination of Submit report with SELECTION-SET and WITH is not working

I tried all possibilities to make the additional parameter also pass to the report along with variant but it just does not work. Anybody faced this issue before?
Code snipped which is not taking pernr parameter along with variant 'Report Dis'.
SUBMIT H99CWTR0 USING SELECTION-SET 'REPORT DIS'
       WITH pernr = pernr-low
       EXPORTING LIST TO MEMORY
AND RETURN.

Hi,
THis sample code worked for me
data:params type rsparams.
data:it type table of rsparams.
params-low = '2003'.              "In variant ZSURESHPAGA the actual value is 2004, but it got executed for 2003.
params-kind = 'P'.
params-option = 'EQ'.
params-sign = 'I'.
params-selname = 'P_YEAR'.
append params to it.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
    report                 = 'Z12256_TASK1'
   VARIANT                = 'ZSURESHPAGA'
   SKIP_SELSCREEN         = 'X'
TABLES
   SELECTION_TABLE        = it
EXCEPTIONS
   JUST_VIA_VARIANT       = 1
   NO_SUBMIT_AUTH         = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT H99CWTR0 USING SELECTION-SET 'REPORT DIS'
WITH pernr = pernr-low       "<----check this statemnent
EXPORTING LIST TO MEMORY
AND RETURN.
Edited by: Keshav.T on May 13, 2010 4:07 PM

TS1702 Selection handles in pages app not working.I am only able to select. Not able to expand .What should I do?

Selection handles in Pages App is not working suddenly. I can select a word or cell,but I am not able to drag it.What to do?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Bulk Select and FOR ALL update not working

Hi
I am trying to run this but it does not work. I get this error
PLS-00430: FORALL iteration variable I is not allowed in this context
declare
cursor c is
select employee_number, national_identifier,
last_name, first_name
from per_all_people_f;
type en_tab is table of per_all_people_f.employee_number%type;
type ni_tab is table of per_all_people_f.national_identifier%type;
type ln_tab is table of per_all_people_f.last_name%type;
type fn_tab is table of per_all_people_f.first_name%type;
en en_tab;
ni ni_tab;
ln ln_tab;
fn fn_tab;
begin
open c;
loop
fetch c bulk collect into en, ni, ln,fn;
forall i in 1..en.count
update xxdl_hr_people_interface
set first_name = fn(i),last_name = ln(i),national_identifier = ni(i)
where employee_number = en(i);
exit when c%notfound;
end loop;
close c;
end;
But if I dont try to update first_name ,last_name, national_identifer at the same time and modify the block to be like this, it runs
declare
cursor c is
select employee_number, national_identifier,
last_name, first_name
from per_all_people_f;
type en_tab is table of per_all_people_f.employee_number%type;
type ni_tab is table of per_all_people_f.national_identifier%type;
type ln_tab is table of per_all_people_f.last_name%type;
type fn_tab is table of per_all_people_f.first_name%type;
en en_tab;
ni ni_tab;
ln ln_tab;
fn fn_tab;
begin
open c;
loop
fetch c bulk collect into en, ni, ln,fn;
forall i in 1..en.count
update xxdl_hr_people_interface
set first_name = fn(i)
where employee_number = en(i);
exit when c%notfound;
end loop;
close c;
end;
Any pointers on why this does not work?
Thank you
Kumar

If per_all_people_f has a PK or unique index on employee_number, then you can do:
UPDATE (SELECT pi.first_name, pi.last_name, pi.national_identifier,
               pf.first_name pffirst, pf.last_name pflast,
               pf.national_identifier pfnat
        FROM xxdl_hr_people_interface pi, per_all_people_f pf
        WHERE pf.employee_number = pi.employee_number)
SET first_name = pffirst,
    last_name = pflast,
    national_identifeir = pfnatIf not, you can do:
UPDATE xxdl_hr_people_interface pi
SET (first_name, last_name, national_identifier) =
            (SELECT first_name, last_name, national_identifier
             FROM per_all_people_f pf
             WHERE pf.employee_number = pi.employee_number)
WHERE EXISTS (SELECT 1
              FROM per_all_people_f pf
              WHERE pf.employee_number = pi.employee_number)Note that if there might be more than one row in per_all_people_f for an employee_id, then you need to modify the select sub-query to add a predicate to make sure it only returns one row for each employee_number.
John

Quick select tool hangs and will not work

All of a sudden the quick select tool will not work/hangs up has a mind of its own and wanders/ after installing an upgrade to Nik software Color Efex Pro 4. I put that in the trash as I could not find a way to unistall. Probably still part of it in other areas?
Still did not work. Then I uninstalled PS 5.5 extended. Reinstalled to find it the same as before. All preference etc the same and a blank cach document show up in Bridge, did this before too. It is like I never uninstalled it.
What gives. How do I get a clean copy of PS?

You're welcome.
hiking11 wrote:
…do you know how to find the installer on a Mac so I can uninstall some of the Nik software…
There is no such thing as a system wide uninstaller on a Mac. Only a few select applications, like some of Adobe's, install an application-specific Uninstaller, e.g. in the Utilities folder of your root level ./Applications folder. I have no idea if Nik provides such an uninstaller or not.
hiking11 wrote:
…Where you are have a Great Christmas season…
Well, thank you. Actually, I'm not that far from you in Northern California, some 100 miles NE of San Francisco. My user ID, Tai Lao, is just a phrase that means Too Old in Mandarin, and my signature, Wo Tai Lao Le, 我太老了, just reads I am Too Old in Mandarin too, Happy holidays to you too/
Wo Tai Lao Le
我太老了

Tabbed selection screen with AT SELECTION-SCREEN ON events does not work

I have a selection screen with 3 tabs fields on each tab have AT SELECTION-SCREEN ON field events.
If you are on tab 1 and select a variant that populates fields on all tabs and then click the execute button ABAP does not seem to recognize that the field has changed when it executes AT SELECTION-SCREEN ON field event unless you physically go to each tab.
I can work around this by:
1) moving all of the AT SELECTION-SCREEN ON field events in a AT SELECTION-SCREEN OUTPUT event. This is not efficient and it potentially opens me up to other problems.
2) changing the selection screen to remove the tabs and have all of the fields on 1 screen. This makes for a very long screen.
Is there any way to have ABAP check all tabs?
Thanks,
Jerry

I finally got it to start. Let it sit and tried and it wouldn't but then I tried again and it did. How do I blow the dust out? I think it must be something with the heat since that comes up alot.
I will do it, I love my Mac.

Apple TV Bug: selecting Podcasts to sync does not work: syncs everything

I have even tried to restore to factory settings, then downloading latest software, deselecting everything but one podcast (video) and look, indeed, no movies, no music but then all podcasts from my entire library are synched to the ATV despite only selecting one... Apple, please can you fix this.
I also have the problems others are reporting on the movie and TV show synching and disappearing but think that has enough attention right now..

It seems that the Apple TV is really designed to stream and connect with media that is on an Apple desktop that is always available to update and sync data.
Synced content plays independent from any computer, streaming is only possible with a computer running iTunes. You have to judge for yourself whether the 40 GB drive holds enough content for the time when your computer is not available.
I only have my laptop available in my apartment for perhaps three hours at the most. During that time I am probably working on it, so it is not just idle to do syncing.
Syncing runs fine in the background. The network bandwidth is the limitation, not your computer power.
Also I was wondering if people could give me advice on the specs required of a Mac mini to run video playback.
The mini should have no problems playing back the video (and recording it). Other people in this forum who have used their mini as a dedicated video server might jump in.

Convert select traditional or simplified chinese not working

Similar Messages

Maybe you are looking for