'Convert Selection' Doesn't Work - Over Quickly

Hi.
I put a CD in the drive, i go in iTunes, highlight the tracks, right-click then 'convert selection to...'; It converts the tracks, yes - but in about half a second per track, and then the tracks don't actually work. It's a mystery and incredibly frustrating.
Does anybody have any idea what's going on?
I would be very grateful for your help.
Danke.

If you go along the top of the screen in iTunes go to Edit>Preferences>Advanced>Importing, check to see if 'Use error correction when reading Audio CD's' is checked.
If it is checked, try unchecking it, and then re-importing the CD to see if that helps.

Similar Messages

  • Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g

    Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g, please help me

    Are you sure?
    According to Apple Facetime will only work over WiFi. IOS 6 will bring feature that you can make Facetime call over 3g-4g

  • Record Selection doesn't work with VS 2005 & CR 2008

    Hi all,
    Recently I installed CR 2008 with Service Pack 1 and integrate with Visual Studio 2005. I converted all the CR reports to CR 2008 while opening the VS project which was created earlier.
    My problem is when I load the Crystal report via created application, record selection formula doesn't work instead it shows all records. But in designing time it works fine. Reports which designed with SQL Server Stored Procedure working fine. But reports which designed by adding Tables don't work. It shows all the records without record selection.
    I used simple Record selection formula without using any parameter fields. like this
    tTransactionDetails.acid} = 1
    . still it didn't work.
    When I put break point and see assigned values in Report Document object. It shows
    Function evaluation timeout
    . and then run, it do the record selection. I did this several times, all the time if I see assigned values in Report Document object then the report showed the selected records only otherwise it shows all the records.
    I tried this just running the application exe, still the problem remaining.
    I have saved the reports without the data, so that it will always load the data from the SQL database.
    Please help me to solve this problem.

    Sorry i couldn't do search before I posted the thread. After posted, I just did a search and found the solution by reading [this thread|https://forums.sdn.sap.com/click.jspa?searchID=20348355&messageID=6774564|https://forums.sdn.sap.com/click.jspa?searchID=20348355&messageID=6774564].
    As it has suggested, I just delete the existing Crystal Report Viewer Control from the form and add it again by clicking on CrystalReportViewer version 12.0.2000.0. It worked.

  • In Mountain Lion: Convert Chinese doesn't work

    Convert selected simplified Chinese and Convert selected tranditional chinese doesn't work.
    Anybody has the same situation?

    Thanks very much. 
    However, I just erased whole disk and re-install a clean, new 10.8 system.  The problem has been solved I think. But the new problem is that if I selected all text and right-click on whole text or file which include english, simplified chinese and traditional chinese character (actually it's a .srt file).  "Convert text from simplified to Traditional chinese" and vice versa won't appear. 
    If I just selected couple sentences or lines, the functions works fine.  It's like OSX's auto detection? Not sure, but it really bother me. 
    Do you know why sometimes that function doesn't appear? Region? Language prority setting? All I have tried.

  • PRC Converter Tool doesn't work!

    Hi
    i wanna to use the PRC Converter Tool, included in midp_palm-1_0-beta.zip, to converter the sampler.jad to a prc file. However it doesn't work. No File had generated after i selected the sampler.jad file and clicked the convert button.
    i'm using win2k with jdk1.4.
    any idea?
    Ziong

    I found that it's not work only in jre1.4. It works fine in jre1.3.1.
    But the MIDP for Plam OS User's Guide claim that use jre 1.3 or later. Is it a bug in jre1.4?

  • Selectable doesn't works for input field

    I wonder that the selectable property doesn't works even for
    input field in flash 8'
    I can't see, select, type anything.
    Is there any reason for it and how can I tackle this issue.
    But it's not a problem in IE7 and works fine in IE7 even it
    doesn't do in flash IDE
    Plz anyone get this solved.

    Are you saying you have an input field and cannot select text
    you type?
    BTW, setting an input field's selectable property to false
    locks the field.

  • [solved] SSH doesn't work over PPTP VPN with pptpclient

    I just got set up with access to my work's PPTP VPN. Using pptpclient I can establish a connection and ping servers. I can use telnet to confirm ports 22, 80 etc are accessible and I can access web services in my browser, but SSH doesn't work.
    When I try and SSH to a server it just hangs for a minute and then "Connection closed by 10.70.11.10". Wondering if SSH was using my default route rather than the appropriate tunnel, I tried setting my default route to use the VPN, and ping, telnet, nmap etc still seem to function and return expected results, but SSH still hangs and closes. There are no entries in the sshd log on the servers that I attempted to get access to. I have both Arch and CentOS servers and I cannot get to either via SSH.
    My colleague connected to the VPN on his mobile phone and managed to SSH to a server, so it doesn't seem that the VPN is blocking this... any ideas?
    Thanks
    [update]
    Solved! I found that in /etc/ppp/options, un-commenting -mru fixed this for me:
    # Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
    # 1500).
    -mru
    [/update]
    Last edited by jsteel (2014-08-10 20:06:31)

    targetbsp wrote:
    summit48 wrote:
     Windows10 has hijacked the back end believing every Laptop and Desktop PC is a Smartphone. What do you mean by that?Windows 10: Microsoft under attack over privacyhttp://www.theguardian.com/technology/2015/jul/31/windows-10-microsoft-faces-criticism-over-privacy-default-settings In the "one size fits all" philosophy of Microsoft there is no distinction between a smartphone and a PC. You might turn some of these privacy setting on for a smartphone but not on a PC. 

  • New Site create - select doesn't work ok

    OS Vista Home Premium. Installed DW CS3 and when create new site and setting up folders, button select does not work ok. It point to the folder one up not the present one. If c:/root/image and I'm in image the select point to root.
    http://www.youtube.com/watch?v=iCiKtVMhS5Y Is it problem with DW or Vista ?

    Yup, I've had the same problem in CS3 and now CS4.  After much MUCH googling, the only thing I've found so far is that this problem developed for people after SP2 came out for Vista.  I haven't seen any fixes for it yet.  My only solution is to automatically create a folder inside the folder I want to use as my root....then I select that folder.  After going into that folder, the folder one level up, which is the one I want for my root is able to be selected.  After I get the folder I want set, I delete the dummy folder....or I name it images and use it as my image folder.
    Problem is, if I want to define a default image folder, or spry folder I have to make dummy folders inside those subfolders too.....its a real pain.

  • Verizon messages app doesn't work over wifi....

    Hello, all,
    Until recently, I used the verizon messages app to send/receive texts over wifi on my gs3 when I had no cellular/data reception.  Now it will only send/rec when there's cell reception.
    But...the app does still work over wifi onmy galaxy tab 2 7.0.
    Why could this be?  Did a recent app update break txt over wifi for the gs3?
    Thanks!
    Abe

    This does NOT work on the Galaxy S3.
    Airplane mode ON, Wifi ON, No network mode is available in Airplane mode.  So...only wifi is available.  When I try to send a text with only wifi available I get "Network not available.  The message will be sent when the network is available"
    BUT...On my Galaxy Tab 2 (non-verizon), This DOES work.  On the tab 2 with only wifi available, I CAN send text messages using Verizon Messages.
    So....again...
    On Galaxy Tab 2 with only WiFi available...texting with Verizon messages DOES work.
    On Galaxy S3 with only WiFi available...texting with Verizon messages DOES NOT work.
    Please fix Verizon Messages to work over WiFi using Galaxy S3.
    Thanks,
    Abe

  • Officejet 4500 doesn't work over ethernet connection

    My Officejet 4500 is recognized by my router but not by anything else.  Tablet doesn't see it nor does the desktop.  Your also supposed to be able to set it up as sort of a cloud printer...but that doesn't work either.  System is Vista Home Basic 32 bit SP2.
    HP= Good hardware + terrible software
    Dell= Bad hardware + good support

    Hi Tim,
    I would like to confirm the exact model of your printer.  Is this the G510h or a different model? 
    The list of printers and the ePrint (Cloud) support list is here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Is the desktop also connected Ethernet to the network?  Does the printer network status page show a network IP address?
    Which tablet do you have?
    I was an HP employee.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Laserjet p1505n doesn't work over network with Yosemite

    Ever since upgrading the machines in my house (Mac Pro, iMac, MBPretina, MBAir) to Yosemite, I have not been able to use the network attached Laserjet p1505n that used to work flawlessly under 10.9.  It doesn't appear in the printer tab in System Prefs where it used to pop up.  Anyone have any experience with this?  The printer will install via USB just fine on the Mac Pro, MBPRetina, etc.  Thanks!

    To see the printer in the Default view of the Add printer window, a protocol called Bonjour is used by the printer and Mac. This protocol is having issues for some users who have upgraded to Yosemite. Until the issue is resolved you may be able to use one of the IP protocols to connect to the networked printer. To do so you will need to find the IP address being used by the printer. If the LJ-P1505n has a control panel, you may be able to generate a report showing the network settings.
    Once you have the IP address you can open Printers & Scanners and click the plus button to add a printer. Then click on the IP icon and enter the IP address of the HP in the Address Field. In the Protocol field, change to HP Jetdirect-Socket and in the Queue field, leave this blank. You can then change the Name from the IP address to LJP1505n and in the Use menu, select the P1505n printer. Click the Add to complete the printer creation and then see if you can print.

  • Mail Services New email with selection doesn't work, leads to Force Quit

    I've posted this before, but got no replies so I'm trying again since it's driving me crazy. It was a problem under Mavericks and still exists under Yosemite's Mail.
    When I select text and then go to the Services menu and pick "New email with selection," much of the time a totally empty new email message window opens , won't let me type in it at all, nor will it close or send. It just sits there until I Force Quit Mail.
    HELP PLEASE!!!

    Standard Apple Mail. I'm running Yosemite 10.10.1, and I'm amazed to see that About Mail says it's Mail Version 8.1 (1993), copyright 1995-2014 Apple Inc. 
    Interesting thought, do you think that it doesn't like to work with itself?  Actually, I'm fairly sure I've had the problem inside of other apps but I should document that.  I'll keep notes to see where this happens. 

  • Pixma MG6200 scanner doesn't work over wifi

    Hi I'm on a Mac Book Pro OS X 10.8.5.
    I'm WIFIed to my MG6200 printer scanner and can print, but can't scan. When I try, I get..
    Printer is in use or an error has occurred. Check status.
    Scanner reported an error
    I've tried trashing and rechoosing the printer/scanner and that doesn't help.
    What can you suggest?
    Thanks,
    Ty Ford
    Solved!
    Go to Solution.

    Hi TyFord,
    We can reset the printer system on your computer, then reinstall the printer using the latest drivers from the Canon USA website to see if this will resolve the issue.  To reset the printer system, please follow these steps:
    1. Go to your Apple icon on the upper left corner of your screen.
    2. Click System Preferences.
    3. Click Print & Fax
    4. Right click your printer on the left and select "Reset printer system". Note: If right click does not work, press and hold the
    control key on your keyboard and then click the mouse button.
    5. If your printer is still listed on the left select your printer and then click the minus (-) button to delete it.
    6. Restart your Mac.
    Next, please click here to go to the Drivers and Software page for the PIXMA MG6220. Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the MINI MASTER SETUP file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded the Mini Master Setup file, please follow the steps above to also download the ICA drivers from the DRIVERS section, and the MP Navigator program from the Recommended Downloads section. 
    Once all items are downloaded, please double-click on each of the items to install them on your Mac, then attempt to scan.  Should you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Lexmark x4650 doesn't work over wifi

    I recently bought a Lexmark x4650 wireless printer. I followed the install instructions that it came with it then updated the software, but my Mac just doesn't recognize it wirelessly, but it prints fine when connected via USB. My Linux laptop can print over the wifi no problem, so it's not the printer.

    I would expect that with the Linux laptop you would have needed to create a TCP/IP network queue rather than relying on some form of network discovery. I suggest that you could use the same technique on the Mac.
    When adding the printer, select the IP icon and then select LPD or HP Jetdirect for the protocol. You can then enter IP address of the printer and the respective driver in the Print Using menu.
    If this new queue fails to print, open Network Utility and use the Ping function to check that the Mac can get a response from the Lexmark.

  • Song-Radio doesn't work over different (Spotify Connect) devices at same time (anymore)

    In current Versions of the Clients (Android, Windows, Spotify Connect Device (Yamaha CD-N301)) the Song-Radio function doesn't sync the Song-Radio List* (not the playlist!) correct over different devices. For example, if I start a Song-Radio on Android, the correct screen is shown on my Android Device, but in the Windows Client, I see only "a normal playlist" without the thump up/down buttons, but with the (in Radio-Modus not allowed) back button. In the other direction (starting Song-Radio in Windows and look it on Android) it also do not work. It's possible a bug - not only that it worked in older Versions - starting a Song-Radio on Windows with a Spotify Connect Device currently being the speaker (Android or Yamaha CD-N301) results in a "working" Radio Screen in Windows, but the current playing Song isn't that shown on the Radio Screen, but the Speaker Symbol on the Song in front is shown! (see attached screenshot)Starting the Song-Radio in Windows with Windows is the Speaker works. It looks like that it works also when it's switched to another device as speaker after the Song-Radio was started with Windows as the Speaker. Starting the Song-Radio in Android Device shows the correct Song on all devices - even with other devices as the speaker - but it's not shown as Radio on Windows. Possible it's just a problem with the Windows Client - but without more devices to test, I couldn't say, and when starting the post, I noticed it while listening to my Yamaha CD-N301. *: The Radio Screen where I'm able to see the current and last played songs and where I'm allowed to like/unlike (thumb up/down) the current song, and where I'm also only allowed to forward to the next song - not go back to the last ones, so the backward arrow is missing. Well, you possible know what screen I mean - it's that one called Radio :D

    emeres wrote:
    schizo-ri wrote:When I try to pair it shows it failed. Is this normal, it doesnt have to be paired? In Gnome bluetooth settings it also shows DS3 as connected but not paired.
    Wiki wrote:Now you will need to pair it with bluez.
    Are there any additional messages in dmesg or journalctl?
    Yes, from journalctl:
    bluetoothd[267]: No agent available for request type 0
    bluetoothd[267]: device_request_pin: Operation not permitted
    emeres wrote:
    Wiki wrote: Next time you hit the Playstation button it will connect without asking anything else.
     Does it do that?
    Yes, it connects.
    kernel: input: PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/bluetooth/hci0/hci0:3/0005:054C:0268.0006/input/input17
    kernel: sony 0005:054C:0268.0006: input,hidraw1: BLUETOOTH HID v1.00 Joystick [PLAYSTATION(R)3 Controller] on 00:15:83:15:a3:10
    bluetoothd[267]: sixaxis: compatible device connected: PLAYSTATION(R)3 Controller (054C:0268)
    upowerd[501]: (upowerd:501): UPower-Linux-WARNING **: no valid voltage value found for device /sys/devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/bluetooth/hci0/hci0:3/0005:054C:0268.0006/power_supply/sony_controller_battery_00:24:33:54:94:fb, assuming 10V

Maybe you are looking for