Convert Slo-Mo to Real-Time

I was given a QT mov of a crash test in slow motion which I have placed on my FCP timeline. The clip has a duration 00:00:10.21, 310 frames @ 30 fps. I would like to speed this back up to real time to show the clip as it really happened. What settings do I use to modify the speed of this clip? Do I use the 'percent' field or the 'duration" field? I do not have the original tape of this footage in real-time. I know that there must be some formula for this conversion but do not know what it is. Please help.

you need to know the original duration
if you do, then just mark an in and out in your
timeline that reflects that duration, then use Fit to
Fill (drag the original clip onto the canvas and drop
it on the fit to fill overlay)
Thanks for your help. I will contact the individual who created the clip to find out the duration of the original clip before it was slowed down.

Similar Messages

How to install Vision run-time engine to a desktop PC converted to real-time target

Hi, all
I don't know how can I install the vision run-time engine to a desktop PC which I converted to a real-time target. The same problem applies to installing real-time run-time engine and labview run-time engine to the real-time target. The only way to install software to real-time target is through "add/remove software" in MAX for remote system, but it is not for all types of run-time engine installation.
I am also confused about how to activate those run-time engines for the desktop PC as real-time target.
Please help and great thanks.
Wei

Hi turtle,
Here is a link that explains how to set up a desktop PC as a real-time target. The section for Formatting & Setup should help you the most.
NI Developer Zone Tutorial: Requirements for Desktop PCs as LabVIEW Real-Time Targets
Justin D.
Applications Engineer
National Instruments

Converting Thumbnails to real time images

Some how I have deleted all my photos from my Mac Air & when I recovered it, all photos turnup into thumbnail. Is their any we can convert Thumbnail into real time images?

Thumbnails are real images but only smaller. There's no way to up size them to get back to the size the orignals were.
You're best bet is to restore the library from the backup copy made just prior to this happening.
OT

Batch Convert 1080/24p to 720/24p... AND Conform to Real-Time

Hi there! A little bit of a conundrum, but I'm sure the answer is out there.
I have about 4 hours of content that was shot on the Sony FS700. The clips were shot at varying frame rates, but the FS700 automatically conforms high-speed footage at 1080/24p. We've already imported to ProRes 422, but I also have the source media (as shot) still available.
I need to covert everything to 720p/24, and also conform to real-time. There's obviously a VERY long story as to why I'd need to "throw out" frames, but that's beside the point. We've all dealt with silly clients...
Rest assured, our group will edit with the original media (and just speed up when we need real-time.) Any suggestions? I'm on a Mac with Adobe CS6 (new convert!) and Final Cut Studio 3. I also own Telestream Episode. THANKS!

Thanks very much for your help. Yes, it was the faster frame rate I was thinking that I thought could help for the fast action sequences. I was concerned about the jello problem that might be more noticeable at a lower frame rate in fast action scenes. If I'm not mistaken, I believe the GH1 doesn't shoot interlaced, only 1080p and 720p in its movie modes.
Actually, sorry I made a mistake in my previous post. In 720, the Gh1 shoots at 60fps, not 30.
My plan was for the timeline sequence to be 1080 and just drop the 720/60p scenes into the 1080/24p timeline. On the GH1, the advantage of shooting in the 720/60p mode is the great slow motion shots you get when slowed down to 24p. Otherwise, yes, the majority would be 24p.

How can I display a .csv file as a real time waveform using labview

Hi folks.
As stated, Im looking to display a .CSV file (obtained via RS-232, example; 100,101,102,102,102,103...) as a waveform in real-time. What is the best way to approach this? Im thinking LabVIEW. I have version 7.1 but am not really experienced in using it. I'll give anything a go though. Also, I have Visual Studio 2005, so I was thinking VB???
Thanks in advance!
Simon.
Message Edited by simonious on 10-26-2007 04:13 AM

Have a look at this VI.
Add a convert string to number function behind it.
André
Message Edited by andre.buurman@carya on 10-26-2007 01:08 PM
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)
Attachments:
convert csvars 2 array of vars.vi ‏16 KB

Getting video to play real time in an NTSC monitor question?

I’m trying to get video in my NTSC preview monitor to play real time. It will send a picture to the preview monitor but will not play real time even when timeline is rendered. I’m coming out of the back of my video card (ATI Radeon 9600) through a DVI cable to my HDTV monitor. Do I need a Firewire digital to analog converter box in order to see video in real time? I don’t want to use my camera as a pass through. Does FCE support a second monitor at all during editing?
Any info greatly appreciated!

Thank you so much for the reply! I just purchased a Firewire Datavideo DAC-6 DV to Analog Video Converter and it even has component out to the NTSC monitor. It will be here on Wednesday! Good to know I can run a preview monitor while editing. Thanks again for assisting me.

Real-time HDV importing ..& Happy New Year!

Hi! Happy 2006!
Some time in December (?) I said I'd been to the London Apple Store to try importing HDV - with a Sony FX-1 camcorder - into iMovie HD on a PowerMac, to see if it'd import in "real time" ..instead of importing at half or quarter speed, on my PowerBook and Mac mini, while it converts hi-definition footage into Apple's 'Intermediate Codec' (to make HDV MPEG footage editable).
It couldn't be done in the hour and a half I was there, so an Apple Genius was going to get back to me.
After a bit of complaining and cajoling, a Genius at 'The Studio' in the Store finally got back to me on Jan 3rd. [I'm now back home, so this is my first visit to Discussions for a while!]
As I promised that I'd report back, here's what he said:
"Today I imported HDV 1080i footage into iMovie using the Sony HDR-FX1 Camcorder using a Dual 2.7 G5 Power Mac with 4.5 Gb of Ram and there didn't appear to be any lag, it was realtime. I would recommend having as much memory as possible and having less than 4.5 might mean there is a transcoding lag as iMovie converts the HDC encoded footage using the Apple Intermediate Codec. I do not have any details what the minimum speed processor and memory requirements are to achieve realtime import, however it is hardware dependent.
As another alternative you may consider using Final Cut Pro 5 software. This software uses the HDV Codec Natively and there is therefore no transcoding required. Capture is in realtime, whatever machine you use, so long as it is within the minimum requirements for Final Cut Pro 5. (Please check http://www.apple.com/finalcutstudio/finalcutpro/specs.html for further detail) For details of using HDV with Final Cut Pro 5 please go to http://www.apple.com/finalcutstudio/finalcutpro/editanything.html
I hope this goes someway to answering your queries."
(..So maybe I'll get a post-Christmas present of a quad ..Daniel's should have arrived by now ..wonder if his feet have touched the ground since..)
So we who patiently wait while iMovie HD imports hi-def HDV at half-speed or slower could achieve 'real-time' importing with a PowerMac and lots of RAM, it seems.
I also tried an HC-1 (..the compact 1-chip HDV camcorder..) and have to report that the auto-focus isn't anywhere near so fast as the pretty-near-instant focusing of the FX-1, and - predictably - its low-light performance isn't anywhere near the bright, un-grainy, colourful images of the FX-1. But the HC-1 does have NightShot and Super NightShot for shooting (monochrome) in absolute darkness, helped by infra-red LEDS on the camera, which the big, bulky FX-1 doesn't do. The HC-1 has just about all of the other gizmos of the FX-1 (..user-definable preset transitions - to zoom, change focus, adjust white balance, etc, automatically during shots..) but they're accessible mainly through touch-screen menus, instead of via quick push dedicated switches.
So Happy New Year; hope it's a good one - and a faster Mac DOES mean real-time importing of HDV footage!
[..I notice that Focus FireStore on-camera hard drives - which mean "say goodbye to importing, because your footage is saved to disc while you shoot" - have an HDV-compatible model ..but I think it still takes time to convert the captured HDV MPEG footage on the drive into Apple's Intermediate Codec for editing within iMovie HD. I'll investigate further..]
Hope you had a good Christmas/Hanukah/whatever!

HAPPY NEW YEAR!
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

How Real Time Apply works while physical standby is open in Read Only mode

Hi,
With Active data guard option, we can open physical standby DB in read only mode, while redo log are being applied. (Real Time Query)
Standby Redo log (SRL) enables Real Time Apply (with "USING CURRENT LOGFILE" clause in recover database command on standby DB)
I am interested to know, how Real Time Query works ?
What is the mechanism with allows us to open physical standby DB in read only mode while redo logs are being applied continuously ?
Regards,
Sujit

Dear user7419391,
That is a new feature in Oracle Database 11g. MRP can use the real time apply in 10g but the concept here is different.
Taken from the following document;
http://www.ascent.co.za/documents/oracle/Oracle%20databse%2011g%20Active-Data-Guard%20datasheet.pdf
*Unique Advantages of Oracle Active Data Guard*
+Active Data Guard is an evolution of Data Guard technology, providing unique+
+performance advantages while leveraging all other enhancements included in Oracle+
+Data Guard 11g. For example, any Data Guard 11g physical standby database can+
+be easily converted to a Snapshot Standby. A Snapshot Standby is open read-write+
+and is ideally suited as a test system, able to process transactions independent of the+
+primary database. A Snapshot Standby maintains protection by continuing to receive+
+data from the production database, archiving it for later use. When tests are+
+complete, a single command discards changes made while open read-write and+
+quickly resynchronizes the standby database with the primary.+
The other link in the previous post is excellent and you really have to read it to understand the active data guard aspects.
Regards.
Ogan

How to implement the Transfer Function in Real Time VIs?

Hi all,
I'm relatively new to Labview Real Time modoule and want to implement one Controller(not PID one) in Deterministic Loop! I have already designed discrete Transfer Function and searching for the way to build one Controller with it! Is it right to use the Simulation Loop instead of Timed Loop (in this case Deterministic loop) and implement the controller in it?! If it's correct so, should I use the same clock and Priod as Timed Loop?!
It would be very helpful, if there is an Example about using transfer function in Real Time Loops!
thanks for your help,
Mohsen

Hello mhmdi,
Sorry I can't open your VI (looks like it is a new version of LV than I have installed).
You're right - you don't need to convert to a difference equation if you have the CD&SIM Module which can take discrete time transfer functions directly. You don't need shift registers with this function, as it is effectively done internally. If you don't have CD&SIM discrete TF's can be implemented easily just in a timed (or while) loop with feedback nodes or shift registers to replicate each z-1 you need.
Some more ideas:
There are many configuration parameters and options with the Discrete TF VI - which you need to understand for your application and make sure are correct. Sometimes implementing in a basic form (timed loop and shift registers) allows you to see what is happening without any confusing options you might not need.
Are you using the Discrete TF VI in a Simulation Loop ? You might need to think if the loop being used is appropriate for a Real Time application. Maybe the timing of the TF, the loop and the DAQmx data are not all suitable for each other.
I'm not familar with DAQmx, so not sure about any specific real-time aspetcs of that.
"if the sample frequency of the discrete transfer function in the timed-loop is at multiple integers of the sampling rate (e.g. 12000 Hz for tranfer function and 4000 Hz for sampling rate, 12000=3*4000), would it somehow improve the resolution of the controller command?"
This could actually make things worse - but depends on your transfer function if it is a problem. Think about it this way - in the scenario you state the input signal going into the Discrete TF will only change once in every three samples, that means if your transfer function includes a 1-z^(-1) factor (i.e. a derivative) - that will be zero for two samples then jump up for the next sample. You'll observe a very jittery/noisy signal, but the noise is due to samples not being correct. This will also occur if the sample times are very similar but go in and out of sync where you may get the occassional sample that is the same and hence the occassional zero in the TF.
In an application I had we had problems trying to get the data coming into a timed loop and the timed loop itself synchronise, and before it was fixed the control signal was very jittery.
Consultant Control Engineer
www-isc-ltd.com

Trouble drawing a real time line across X axis.

Hi,
I am trying to draw a line across the X axis in real time, but for some reason, the simply cases are way off. For example, If I try to draw the line for two minutes. my line will only make it to about 1 min 45-50 seconds within that time. I tried to make up for the difference by checking the system clock, but that has not helped. Can anyone see something obviously wrong in my code:
protected class GraphTimerTask extends TimerTask {
     protected static final int DELAY = 31;
     protected long currentTime = 0;
     protected long previousTime = -1;
     private boolean isOn = false;
     protected Timer timer = null;
     public GraphTimerTask(Timer t) {
          this.timer = t;
          isOn = true;
     public void run() {
          if(previousTime > 0) {
               currentTime += System.currentTimeMillis() - previousTime;
          else {
               currentTime += DELAY;
                Graph.this.repaint();
             previousTime = System.currentTimeMillis();
     protected boolean isOn() { return isOn; }
     protected long getTime() { return currentTime; }
     protected void stop() { isOn = false; timer.cancel(); }
}currentTime is the actual time that is repainted on my graph when the repaint() is called.

Timer does not take into account the time taken to process the Timer event. The following is one of my simple examples of how to do something similar to what you want to do and to take into account (parially) the processing time..
import java.awt.*;
import javax.swing.*;
import java.util.*;
public class SimpleAnimation extends JFrame
    public SimpleAnimation()
        super("Simple Annimation Demo");
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        // The model instance
        AnnimationModel annimationModel = new AnnimationModel();
        // The view of the model
        AnimationView animationView = new AnimationView(annimationModel);
        animationView.setPreferredSize(new Dimension(640, 480));
        // The view becomes the content pane
        setContentPane(animationView);
        pack();
    private static class AnimationView extends JPanel
        AnimationView(AnnimationModel annimationModel)
            // Save a reference to the model for use
            // when the view is updated
            annimationModel_ = annimationModel;
            // Listen for the events indicating that the model has changed
            annimationModel_.addObserver(new Observer()
                public void update(Observable o, Object arg)
                    // All we need to do is to get the view to repaint
                    AnimationView.this.repaint();
        public void paintComponent(Graphics g)
            super.paintComponent(g);
            // Update the view based on the information in the model.
            g.setColor(Color.red);
            // Convert the model positions to view positions
            // in this case by scaling to the actual width and height.
            int xScreenPosition = scaleValue(annimationModel_.getX(), getWidth() - 20 ) + 5;
            int yScreenPosition = scaleValue(annimationModel_.getY(), getHeight() - 20 ) + 5;
            // Display the position of the point
            g.fillOval(xScreenPosition, yScreenPosition, 10, 10);
        private int scaleValue(double v, double size)
            return (int)((v+1.0)*0.5 * size + 0.5);
        // The saved reference to the model
        private AnnimationModel annimationModel_;
    private static class AnnimationModel extends Observable
        AnnimationModel()
            new Thread()
                public void run()
                    long updatePoint = System.currentTimeMillis();
                    final long delta = 100;
                    final double deltaTheta = 2.0 * Math.PI * delta / (10.0 /* seconds */ * 1000.0);
                    // Loop forever updating the model
                    // and notifying the observers.
                    while(true)
                        // Wait until the next frame update point
                        // The approach is to calcualte how long we have to wait. In
                        // this way we partially compensate for the processing time
                        updatePoint += delta;
                        synchronized (this)
                            while (updatePoint > System.currentTimeMillis())
                                try
                                    this.wait(updatePoint - System.currentTimeMillis());
                                catch (Exception e)
                                    // Nothing to do
                        // Update the model - in this case it is very simple
                        theta_ += deltaTheta;
                        // Notify the observers
                        setChanged();
                        notifyObservers();
            }.start();
        // Model access methods
        public double getX()
            return Math.cos(theta_);
        public double getY()
            return Math.sin(theta_);
        // The angular position of the point
        private double theta_;
    // Simple test main
    static public void main(String[] args)
        new SimpleAnimation().setVisible(true);
}

Real time interview questions in XI

Hi guys,
Can anyone send me Real time interview questions in XI to my mail id [email protected] will be awarded.
Thanks in advance

Hi , check some of the FAQS.
Some of them not answered.
. Which of the following are Components of XI
MDM, Adapter Framework, RWB, SLD, IS
-à
2. What is a XI Pipeline?
3. Source element occurs once whereas the target element it is mapped to is produced 3 times when the mapping is executed. Why does this happen?
4. A context object is used in place of what?
5. what is UDF? What are the mandatory functions that you use in a Java based UDF
a. Init() , Execute(), Destroy(), Run(), SetParameter()
6. ABAP mapping is implemented using what?
7. When you dont find the ABAP mapping option in IR what do u do?
8. Any of the of different Mapping types (Java, MM, XSLT, ABAP) can be called in any order for Interface mapping ? True of False
9. Is true case sensitive in case of a Boolean function and can 1 be interpreted a Boolean TRUE?
10. what is Context Changes ?
11. What are the protocols that the Mail adapter supports
12. Why is a SAP BC used?
13. WSDL representation of a Message Interface is used to generate what kind of proxies?
a. ABAP Proxies
b. Java Proxies
c. Neither ABAP nor Java
d. Both ABAP and Java proxies
14. Would you configure a Sender IDOC communication channel?
15. You are required to upload additional libraries for the JMS adapter. How would you do it?
16. QoS that a Sender JDBC communication channel supports
17. What are the transport protocols a JMS adapter supports?
18. Would you configure the Integration Server as a Logical system in a scenario where IDOCs are being sent from a SAP R/3 system to XI?
19. Why do we specify the Logical System name in the SLD?
20. The pre-requisites for sending IDOCs to an XI system
a. Connection parameters must be maintained in SWCV
b. User must have administration rights in XI
c. The IDOC metadata must be imported into IR
21. You need to post a transaction using a RFC. How would you accomplish this?
a. Use a async BAPI call with implicit Commit?
b. Use a async BAPI call with explicit Commit?
22. what is PCK? What is the necessity for a PCK?
23. In a company the Central Adapter Engine is installed close to the business partner site. Why do you this this is done?
24. The flow of a message entering the Adapter Engine from Integration Server is--
a. It is queued, processed using module processors and then posted to the backend application
b. It is processed using module processors, queued and then posted to the backend application
25. Is the persistence layer used by the Adapter Engine and the Integration Engine (Integration Server) same?
26. Is the Message ID specified in the Integration Engine same as the Message ID used during the Message transformation in the Adapter engine?
27. Would you configure a Sender HTTP adapter?
28. QoS in case of a RFC Receiver adapter
29. Sync-Async bridge is used for?
30. A Business Process is
a. Executable cross component
b. Can send and receive messages
31. What is the purpose of a deadline branch
32. What is SXI_CACHE used for?
33. Container elements can be typed to what ?
34. Why is a Wait step used?
35. A block can have which of the following?
a. Multiple Exception branches
b. Multiple Condition branches
36. For what all step types can you use a Corelation?
37. Which of the following is true?
a. Blocks can be Nested
b. Blocks can be Overlapped
38. You need to collect and club messages in a container element coming from different steps. How would you do this?
39. In case of a Block, which of the following is true?
Elements of a super container are visible in sub-containers
Elements of a subordinate container are not visible in all blocks
Elements defined in the process container are visible in all blocks
40. what is Co relation & Local Co-relation
41. Where can you use N: M transformation?
42. Alert framework uses/leverages CCMS?
43. If you want to cancel a process and set its status to Logically Deleted when a Deadline is reached, do you need to use a Control Step having its Action as CancelProcess or is it automatically done?
44. What are the ways an Exception can be triggered?
45. What would be the best architecture after implementing SAP XI? Implementing EDI adapter(s).
46. How to run the Adapter engine as a service?
47. How SAP Netweaver supports a holistic approach to BPM (Business Process Management)?
48. What is the role of SAP XI?
49. How can we differentiate SAP XI from Business Connector (BC)?
50. How to send mail from SAP XI?
51. What are the migration steps from XI 2.0 to XI 3.0?
52. XI will support synchronous communication and asynchronous communication?
A. Yes
B. No
53. Integration server contains the following components?
A. Additional integration services
B. Integration Engine
C. Business Process Engine
D. Integration Repository
54. Integration Repository provides the following components?
A. Business processes
B. Mapping Objects
C. Components at design time
D. Imported objects
55. What is the usage of Web Application server in XI?
56. What is the use of RFC and IDOC Adapters in XI?
57. How to convert WSDL (Web Services Descriptive Language) to target language?
58. What is the component to generate Jave classes?
59. What is ESA (Enterprise Service Architecture)?
60. What are the key elements of ESA?
61. How to transport SLD, Integration Directory & Integration Repository objects to the Production system?
62. Can we import XSD Schemas into XI 2.0?
63. which api you use for java mapping.
64. You use context object in place of what?
65. To make non mandatory node mandatory which you should to?
66. In case of RFC communication sender system sends a rfc call but target system does not receive it. What you think went wrong?
67 Difference between Xi business process and workflow ?
68. When you use transaction SXMB_MONI for process monitoring, which field tells you that the entry is for business process.
69. What are different Xi components?
70. In which all places you can use receive process?
71 In which all steps you can activate correlation?
1. How many interfaces are u developed in u r project.
2,What is land accepted.?
3.What is Your team size ?
4.The work assignment procedure in your organization?
5.What is your complete company object.?
6.What is the nesicity of developing that scenario.?
7.What is the advantage over other integration tools.?
8.What is Sender agreement?
9.What is Receiver agreement?
10.Tell me the steps for Multiple Idoc to File.(BPM Scenarios)
11.Tell me the steps for file to Multiple Idoc (BPM)
12.How to Create Alerts in BPM?
13.How to Use Third Party Adaptors in u r project.?
14.How to Use External Objects?
15.What is the Use of Node Fictions in XI?(example)
16 Examples on RFC lookups?
regards,
Brahmaji.

SAP-XI Real time questions

could you please provide me some real time questions on sap-xi,
thank you

1. What are the Three types of XI Cache? How are they used?
2. Where would you look to find Logical System in the SLD.
ANS Business system wizard
3. What 2 Data Types are automatically created when the Namespace is saved in the Integration Repository?
ANS. ExchangeFaultdata and Exchange log data.
4   Which Development Object in SAP XI forms the "ROOT NODE" of an XML document when an XI message is generated?
ANS MESSAGE TYPE
5. Describe the setting to "Permit Importing of SAP IDOCs or BAPI/ RFCs". Where is this configured?
ANS.
6. What are the valid types of Message Mappings? Which is configured with the Graphical User Interface and requires no coding?
ANS. MESSAGE MAPPING, XSLT MAPPING, ABAP MAPPING AND JAVA MAPPING, MESSAGE MAPPING REQUIRES no coding
7. What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?
8. What is the relationship between Product, Product Version, Software Component and Software Component Version? Give an example.
ANS. PRODUCT: Represents a collection of all versions of a product . In SAP environment , a product corresponds to an SAP technical Component, eg 4.6c,4.6d,4.7
COMPONENT: Represents a collection of all versions of a software components Examples of Software components are SAP_APPL,SAP_ABA,SAP_HR Software
9. Describe the Design Repository (DR) objects you created to configure a scenario.
10. What are the different design time components used by XI?
11. What monitoring service does the integration server provide?
12. Describe the alert functionality of the runtime workbench.
ANS Message alerting allows to set conditions for triggering Alerts. This allows notification of the correct parties for a specific classes of errors.
13. In BPM, if you have async-sync bridge, does the QOS change?
14. What is logging/ trace? List 4 ways to enable logging/ trace?
15. Properties of an async message?
16   Inbound XI message has problem, where do you look for solution?
17. Describe XI message format.
18. Describe end-to-end monitoring. What is it? How is it configured? What are the different   views?
ANS It is a tool for monitoring end to end technical processes involving multiple components.
to configure end to end monitoring :1. On initial screen of runtime work bench ,select configuration tab page.
2.enter the logon data for the monitoring server.
3.choose display.
4.system displays the components of the correct domain and the integration server is selected as default.
5.select the other components that you want to use and configure them as sender or receiver ,or both depending on the component type.
6.we can select monitorin level that we want to use for each of the selected component.
7.Choose save configuration .
          Processes overview and the instance view are the two different views
19. Different steps to make a Sender IDOC adapter work?
20. JMS adapter can talk with what type of systems? Give some examples...
ANS Messaging systems to the integration engine
21.What format can JDBC adapter communicate in? Should you use native SQL?
ANS. JDBC adapter converts data base content to XML messages and the other way around.
22.If communications with JDBC using XML format, what are 4 actions you could do?
ANS. SELECT, INSER, DELETE , UPDATE.
23. How does PCK and adapter framework engine differ?
ANS.
24. Can JDBC adapter query DB tables? Can it insert?
ANS. Yes
25. JMS adapter scenario messaging system provider needs to submit what?
26. List some properties of receiving IDOC adapter.
27. JDBC/ JMS required certain steps before they can work?
ANS vender specific JMS driver must be deployed on to the J2EE engine using SDM
        Appropriate JDBC driver must be deployed on the system
28. What is ALEAUDIT with respect to IDOCS? When will they use it?
29. Properties of the HTTP adapter, does it use or need a sender or receiver communications channel or agreement?
30. What does a RFC adapter support?
ANS sRFCs and tRFCs
31. Is EOIO supported by RFC?
ANS No
32. What are the advantages of using a decentralized adapter engine?
ANS.
33. What are the different monitoring statuses? Where do you find them?
ANS Different monitoring statuses are Message Monitoring, Component monitoring , performance Analysis and Alerting and we find this in Runtime Workbench.
34. What adapters are not in adapter engine? code you can type in,
ANS HTTP and IDOC adapters are not in adapterengine and we can type code in IDOC
A. Which ABAP proxy, in or outbound has Which one used classes with regards to Sync/ Async what is the method call?
36. With an optional node what would be the cardinality? How do you make sure the subordinate fields get mapped?
37. WSDL what is it? Where do you find it in Repository? Is it used in Java or ABAP proxy?
38. XI 3.0, what are the supported mapping types?
ANS Message mapping, ABAP mapping, JAVA mapping and XSLT mapping
39. What are the prerequisites for importing customer defined IDOC?
ANS
40. What are the three IDOC transactions in XI?
ANS SM59, IDX1and IDX2.
41. Context object replace what?
ANS Xpath
42. Two things can make up a collaboration agreement, what are they?
ANS Sender agreement and receiver agreement
43. What is a logical system, with respect to SLD? Where would you assign it?
ANS
44. What is the sender communications channel?
ANS specify the potential senders of messages and the technical communication path
45. If error during inbound or outbound binding, where do you look to solve?
46. URI, URL and URN what are they and what are their differences?
47. To perform content based (logical) routing, two places it can be done. What are the two places?
48. What is an integration process? Where is it executed? What stake?
49. In a message mapping you have advanced user defined function, can you test for context changes, if yes how?
50. What is multi-mapping? Where is it used? What are the advantages?
ANS Multimappping is any mapping that involves N messages either or source or target side   Multimapping can be used in ccBPM
         1.used to map abstract interfaces
         2. Development is same as message mappings.
         3.n:1 transformation
         4.1:n transformation
         5. n:m transformation
51. What are the two XSLT tags, previously that could not be used in XI?
ANS
52. Using a simple user defined function how can you send trace information to be monitored?
53. What is function "exists" in message mapping?
ANS We can handle the error by checking whet her the source tag exists and if it does not we can pass an empty value, which generates the required target field.
54. What Jar file is required to perform Java Mapping?
ANS
55. What is context in message mapping and how is it used?
56. What is remove context and splitby value?
ANS to remove parent context of an element and spliby value is counterpart of remove context.
57. Where can you use user defined function? What is its scope?
58. If you are building Java mapping class which class interface must it implement?
59. What is the scope of mapping template?
60. How does a Boolean function work in message mappings?
61. Source message occurs 3 times, target only once, what is wrong?
62. In simple mapping - one source results in 4 identical target messages, with regarding cardinality what is the problem?
63. What is a prerequisite to do ABAP mapping for a comple transformation?
64. What step can be inserted into an exception branch?
ANS
65. How do you get an error condition to generated an alert?
ANS
66. What actions can you perform in SXI_CACHE?
67. What is a wait step and why is it used?
ANS It is a process flow control relavent and is used toset start time for next step
68. What is a block step and why is it used?
ANS
69. Could multiple instances of an integration process be running at the same time? If so, how does a message find its way to the correct instance?
70. Which XI objects can be used in an integration process? Which ones from Repository?
71. Send message within an integration process to 8 receivers at the same time, how can you do this?
72. What is a correlation? What is a local correlation?
73. What is the relationship between an integration process and business workflow?

Can any one share Real-Time Senario of File to IDOC (CREAMAS) in XI?

Can any one share Real-Time Senario of File to IDOC (CREAMAS) in XI and if possible please share some impartent Screen-Shoots?
if u don't have CREAMAS senario please share Any of Masster data IDOC like MATMAS R DEBMAS.....
Tks
Durusoju.

Now start with these link.....
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
cheers
Aveek

XI real time scenarios practice

Hello XI gurus,
Are there any XI exercises available to prepare myself for real time scenarios?
I understand that SAP training material includes exercises. But other that material (for people who do not have that material), are any other options available?
If I can get XI system access, what are the basic topics/areas that I need to practice to survive the first few months as XI developer?
Thank you very much.
Manu

Hey
Following are the links to weblogs which will help to develop the <b>basic scenarios</b>.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
Sushil Hadge

Real time critical issues in Implementation Project

Hi friends
Please send me the *Real time critical issues in Implementation and Development Projects*
Thanks
Srikanth Reddy.P

Hi
Blue Print: Assume the client is already having sound legacy system in place.
Also assume that all the processes in FICO are neatly documented with visios.
Now study those process flows and prepare a list of sub processes.
Now prepare the fits/gaps/ assessment.
If the process fits into SAP it would be a fit. If an enhancement / modification is required, it goes into the red column.
Record all the discussions with the core users against each process and sub process.
Also list down the dependencies for each process / analyse the integration aspects.
Also plan how you would convert the legacy data into SAP.
The whole document should have illustrations / scenarios and ultimately signed off. This at any cost should not be changed unless, there is a total turnaround in the process requirements.
With the finalised blue print, you could start the activities in the implementation.
Now regarding the interview questions:
- Starts with your resume. How you have projected yourself. Have you shown real time experience or faked up projects. In any case, it is very easy to make out whether you have experience in implementation or support environment. You could never fool the interviewer.
Initially the interviewer would try to make an assessment on your genuinity.
- When did the implementation start?
- When did it GOLIVE?
- Were you involved in the end to end implementation or was it a partial role?
-If you are supporting the client, who implemented SAP?
- What tool do you use to track the support activities?
- How many tickets have you handled so far?
- Name some critical issues which you resolved and without which the production or business got affected?
- What is the system landscape ?
-Have you developed any reports / enhancements / technical / functional designs?
- Are you aware of interfaces / ALE / IDOCs ?
- Are you aware of SLAs
- Rate yourself on a rank of 1 to 10 in FI and CO
- How often have you interacted with client during implementation / support?
- What process designs have been prepared by you?
- How do you react when you get a critical issue or cross modular issues?
And so on and on
Hope this helps

Convert Slo-Mo to Real-Time

Similar Messages

Maybe you are looking for