Convert Solaris 10 zones to Logical Domain

I am in the process of building a Solaris 10 server on a T3-2 server. I am installing the 8/11 update of Solaris 10 and will be installing OVM for SPARC v2.2 on the server. Currently we are running a number of Solaris Zones on Solaris 10 servers. Instead of creating a Logical Domain for each of the physical servers with zones on them, I want to convert each of the zones in a logical domain. The zones are running on SunFire V890s and SunFire V440 servers. They are running the 10/09 update of Solaris 10 that has been patched to the latest kernel level, 147440-15. Can anyone guide me in an appropriate procedure to build the logical domains? Thanks.

may be better to move zone into s10 zone inside s11 ldom

Similar Messages

Zones or Logical Domains

Hello,
If I have an Enterprise T5120 server, would I be better off employing solaris zones or logical domains? I took a long break from this area of expertise and find myself in the wonderful world of virtualization!
Also, if you have any recommendations on books, whitepapers, other documentation, etc., that I can read on both subjects, I would be very appreciative.
Thank you for you assistance.

Well, you could use both :)
did you see this article? I find it rather good:
http://blogs.oracle.com/bobn/entry/zones_vs_ldoms
.7/M.

Convert Solaris 10 Zones into a Logical Domain

I am in the process of building a Solaris 10 server on a T3-2 server. I am installing the 8/11 update of Solaris 10 and will be installing OVM for SPARC v2.2 on the server to migrate our older physical servers to Logical Domains. Currently we are running a number of Solaris Zones on Solaris 10 servers. Instead of creating a Logical Domain for each of the physical servers with zones on them, I want to convert each of the zones into a logical domain. The zones are running on SunFire V890s and SunFire V440 servers. They are running the 10/09 update of Solaris 10 that has been patched to the latest kernel level, 147440-15. Can anyone guide me in an appropriate procedure to build the logical domains? Thanks.

may be better to move zone into s10 zone inside s11 ldom

Solaris 8, 9, and 10 zones in logical domains

We are planning to migrate our current environment to T5-2.
Current application environment is running with Solaris 8, 9 and 10 OS versions in V8* series and M5000.
Our plan is to install multiple logical domains in T5-2 with Solaris 10 or 11 and migrate the current running Solaris 8, 9 and 10 servers as zones. Plan is to create the flash using flar and restore in the target T5-2.
Will there be any issue with the said OS versions on migration?
Please suggest.

Lars,
Use ldmp2v to convert existing physical server to VM and
Convert Solaris 8 and 9 physical servers to container in Solaris 10 VM?
Is that what you are saying?
Major constraint I have is, applications running in the current physical servers have no vendor support, vendor doesn't exist any more. Application has been locked to run only on the same OS version. What I am worried is, while running ldmp2v should not prevent the application coming up in the new virtualized environment. Keeping that in mind, I gave a thought like
1. Install and configure the CDOM (control domain)
2. configure and Install LDOMs with Solaris 10 OS
3. Run flar on the existing Solaris 10 physical server
4. Transfer the flar created to Solaris 10 LDOM and configure it as a zone
5. For Solaris 8 and 9, create LDOMs with Solaris 10 OS
6. Install additional patches and packages needed for supporting Solaris 8 and 9 zones
6. create flar images on the existing Solaris 8 and 9 physical servers
7. transfer the images to newly created LDOM and configure the zone.
8. Current servers sun4u which has to be converted to sun4v.

Solaris 10 Zone for Solaris 11.1 creation with template fails.

Hi,
We are trying to use the Oracle VM Template for Oracle Solaris 10 Zone to create a solaris 10 zone on a solaris 11.1 GZ
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -v
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
Version: 1.0.9.12
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -p /rpool -a 10.83.128.35/24 -i net6 -z testzone
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
IMAGE: ./solaris-10u11-sparc
ZONE: testzone
ZONEPATH: /rpool/testzone
VNIC: vnicZBI83273795
IP ADDR: 10.83.128.35
NETMASK: 255.255.255.0
DEFROUTER: 10.83.128.1
TIMEZONE: Europe/Copenhagen
Checking disk-space for extraction
Ok
Extracting in /opt/scripts/bootimage.8Ham6r ...
100% [===============================>]
Checking data integrity
Ok
Checking platform compatibility
The host and the image do not have the same Solaris release:
host Solaris release: 5.11
image Solaris release: 5.10
Will create a Solaris 10 branded zone.
Checking disk-space for installation
Ok
Installing in /rpool/testzone ...
100% [===============================>]
Attaching testzone
Problem attaching testzone.
More details in /var/sadm/install/logs/solaris-10u11-sparc.log
Cleaning up and exiting.
Friday, May 10, 2013 03:18:01 PM CEST: cleaning up
root@exsolh0005:/opt/scripts#
root@exsolh0005:/opt/scripts# cat /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] ==== Starting: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
[Friday, May 10, 2013 03:17:56 PM CEST] Progress being logged to /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning datasets under rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:17:56 PM CEST] Log File: /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:57 PM CEST] Converting detached zone boot environment 'zbe'.
[Friday, May 10, 2013 03:17:57 PM CEST] Unmounting /rpool/testzone/root
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property zoned=on on rpool/testzone/rpool
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property canmount=noauto on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property mountpoint=legacy on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Mounting boot environment in rpool/testzone/rpool/ROOT/zbe-0 at /rpool/testzone/root (including child datasets)
cannot open 'ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1': invalid dataset name
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: refresh of ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1 failed
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: Error: rpool/testzone/rpool/ROOT/zbe-0: No such dataset.
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning datasets under rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:18:01 PM CEST] Result: Attach Failed.
[Friday, May 10, 2013 03:18:01 PM CEST] Exiting with exit code 254
[Friday, May 10, 2013 03:18:01 PM CEST] ==== Completed: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
Looks like a script bug..
Regards
Claus

Hello All,
I would love to know if someone has a solution to this as I am seeing a similar issue with a slightly different setup.
Solaris 8 and Netra 240. I get the same result with and without patches and finish scripts. After the jumpstart and the failed boot attempt from disk. I can boot from cd, copy the glm driver from the cd to disk, and then everything works as it should. Obviously this is not a solution but only a work around.
Is it something to do with the SCSI hardware architecture used in the *240s?
Edited by: Gareth_Mann on Oct 2, 2007 7:41 PM

Fusion Middleware 11g Weblogic, forms and Reports in Solaris 11 zone

Hi,
Any one Installed Fusion Middleware 11g Weblogic, forms and Reports on Solaris 11 zone ??
So Pls Let me know Weblogic and Fusion Middleware 11g versions which are working
I try
Weblogic 10.3.3 Installed 64 Bit Went OK
Fusion Middleware 11g 11.1.1.2.0 Errors While Relink few items like frmbldr etc
Then Fusion Middleware 11g Patchset5 11.1.1.6 Still Same Errors Relink few items like frmbldr etc
Then Cconfig.sh failed at create domain
Regards

Hi Deepak,
Just config.sh or config.cmd file and try to change the JDK with in and try to configure new domain from there.
Regards,
Kal

How to create Logical domain in Sun Fire T2000 server

Hi,
I am new to this Logical domain, Can some one provide me doc to install a guest OS in logical domain.I have sun T 2000 server with solaris 10 OS
Regards
Alex

Hi Alex,
this is a good place to start reading (even though it refers to LDOMs 1.0):
http://www.sun.com/blueprints/0207/820-0832.pdf
followed by here for the docs set for whichever version you're using - have fun!
http://docs.sun.com/app/docs/prod/ldoms

Solaris 8 Container in Solaris 10 Zone

Hi All,
one of our customers wants to run Solaris 8 with Oracle 8.1.7 in a BrandZ Zone. Does anybody have an idea about how stable Solaris 8 is in a Zone environment? Are there any known issues with Solaris 8 running in a Zone?
Since Solaris 8 is EndOfShipment, are there chances to get up-to-date Sun Hardware bundled with Solaris 8 apart of using Solaris 10 Zones?
Thanks in Advace,
Dog

i didnt however i wasnt hammering it. if the load was expected to be high i would have done the io layout diff (try and follow some of oracles ideas: SAME for one, if possible).
some depends on the load and the load from the other zones. you can use allocate resource limits to give more priority to more important zones or make sure you have enough resources to start. what type of load are you expecting?

Route add problem in solaris 10 zone

hi all
when i add route in one of my solaris 10 zone.. i get the following error. any workaround?
# route add xxx.xxx.255/24 10.xxx.xxx.1
add net xxx.xxx.255/24: gateway 10.xxx.xxx.1: insufficient privileges
thanks
peter

it means i can only add route in globle zone? but
global zone and sub-zones are using diff IP and
interface cards. so how?But they're children of the same kernel. There can only be one routing table (at the moment, anyway). So make your route adds from global and watch them appear in the netstat output of your non-global zones.
I agree that this is a confusing and poorly documented aspect of zones, however. I will admit to you that I barely understand it myself. However, there is a good answer to a question I had about this in comp.unix.solaris. Search that newsgroup for "Viewing non-global routes from global zone". A similar question fell on deaf ears here.
Also, I would recommend searching this forum for "zone routes" or "zone routing" as this is a frequently hit topic.
--gc1973

Problem with Java in solaris 10 zone

HI ,
i get this error message in my solaris 10 zone :
#./java version
Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_11/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space?
in global zone , java works fine !
uname -a
SunOS Server 5.10 Generic_141414-07 sun4u sparc SUNW,SPARC-Enterprise
best regards

I see mention of a similar problem, but only with early development releases of solaris10 branded zones running on Solaris 11 development bits. It seems as though this is not what you are running.
Since there are no swap caps nor brand emulation in place, the next thing I would suspect would be that you somehow have inconsistencies between key libraries (e.g. libc) and the kernel. This could happen if you have a full-root zone that has been force attached (zoneadm -z <zone> attach -F). In the past, I've seen products that do this under the covers (e.g. Veritas Cluster) so it may have happened without your knowledge. If it is a sparse root zone, you may want to run "zoneadm -z <zone> detach; zoneadm -z <zone> attach -u". Prior to doing so, take whatever precautions you would normally take when patching a system.
If you open a support call about this I bet the first advice you are going to get is to patch, as you seem to be 2+ years behind. Also, newer releases of Java 5 are available at http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html.

Solaris 10 zone config for JES

Setup a zone to install JES - Web servers, but when I launch the installer I get the following:
WARNING: Unsupported non-global zone
EntSysResources:zoneCheckPanel-Gui-LocalZoneSupported
Something in the zone setup is incorrect, but not sure what.
Anyone else out running JES in Solaris 10 zones?
Thanks!
Steve
[email protected]

From docs.sun.com -
The following Java ES and zones scenarios are supported in this release of Java ES:
* Installing Java ES in a non-global zone that uses the whole root file system (Using the default sparse root file system is not supported.)
* Installing Java ES in the global zone with no non-global zones
Zone can be 2 type - sparse root and whole root . sparse root model has following folders inherited - /lib, /platform, /sbin and /usr.
If a non-global zone doesn't have any inherit-pkg-dir resources, such a zone is said to be a whole root one
If you want to create a whole root zone but default shared file systems resources have been added by using inherit-pkg-dir, you must remove these default inherit-pkg-dir resources using zonecfg before you install the zone:
zonecfg:my-zone> remove inherit-pkg-dir dir=/lib
zonecfg:my-zone> remove inherit-pkg-dir dir=/platform
zonecfg:my-zone> remove inherit-pkg-dir dir=/sbin
zonecfg:my-zone> remove inherit-pkg-dir dir=/usr

Solaris 8 Zone

Hi,
What's wrong with my config ? I can't create a Solaris 8 Zone.
I think there is problem with the template...
Thanks !
Test 1 :
# zonecfg -z s8-zone
s8-zone: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:s8-zone> create -t SUNWsolaris8
zonecfg:s8-zone> set zonepath=/zones/sol8
zonecfg:s8-zone> set autoboot=true
zonecfg:s8-zone> add net
zonecfg:s8-zone:net> set address=192.168.20.192
zonecfg:s8-zone:net> set physical=eri0
zonecfg:s8-zone:net> end
zonecfg:s8-zone> commit
s8-zone: unknown brand.
s8-zone: Invalid document
Test 2 :
# zonecfg -z sol8
sol8: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:sol8> create -t SUNWsolaris8
zonecfg:sol8> verify
zonepath cannot be empty.
sol8: unknown brand.
sol8: Invalid document
zonecfg:sol8> quit
Config
Kernel patch : 120011-14
Migration Assistant patch : 128548-03
Release : Solaris 10 8/07 s10s_u4wos_12b SPARC
# pkginfo | grep -i bran
system SUNWs8brandr Solaris 8 Migration Assistant: solaris8 brand support (Root)
system SUNWs8brandu Solaris 8 Migration Assistant: solaris8 brand support (
# pkginfo | grep -i p2v
system SUNWs8p2v Solaris 8 p2v Tool
SUNWsolaris8.xml :
root@sf280test:/ # more /etc/zones/SUNWsolaris8.xml
<?xml version="1.0"?>

<!DOCTYPE zone PUBLIC "-//Sun Microsystems Inc//DTD Zones//EN" "file:///usr/share/lib/xml/dtd/zonecfg.dtd.1">
<zone name="default" zonepath="" autoboot="false" brand="solaris8">
</zone>

Your problem is that you can only create Solaris 10 zones. Zones is not a true virtual machine so it can not support older version of Solaris. you want to install. If you need to run Solaris 8 on the same machine as Solaris 10 your only choice is to use something like VMware.

Solaris 8 on a solaris 10 zone?

Can i install and configure solaris 8 OS on a solaris 10 zone? If yes , is it supported by sun in case we run into any issues and is it a straight forward way of doing it or is there any implication.complexities involved in configuring so?
Thanks in advance

Ah, attitudes, everyone has one...
As the link awhile back implied, there is something called the "Solaris 8 migration assistant" which is a Solaris 8 "branded" zone. It's still running the Solaris 10 kernel under the covers (so technically you're not running Solaris 8 in a zone) but it's impersonating a Solaris 8 system. I think there's a Solaris 9 version now too.
The last I heard, Sun was saying these can only be implemented with Sun Professional Services but I don't know where that stands. I don't believe it's free either.
Here's a link to the docs: [http://docs.sun.com/app/docs/doc/820-2914/|http://docs.sun.com/app/docs/doc/820-2914/]

Inetd service/program crashes with core dump in Solaris 8 zone/container

I have developed a service in C that is launched from inetd when something comes on a specific port.
When a connection is opened to the port a core dump is created in the same directory where the executable file is located.
If you run the same service program from the command line everything is working perfect.
This is running in a Solaris 8 zone/container on a Solaris 10 machine.
Everything is set correctly in /etc/inetd.conf and in /etc/services.
I have even stripped down the program to a hello world program that is just printing a string to the screen and it is still crashing with a core dump.
# ldd test_srv
/usr/lib/secure/s8_preload.so.1
libc.so.1 => /usr/lib/libc.so.1
libdl.so.1 => /usr/lib/libdl.so.1
/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1
The same service is running on a Linux machine and on a Solaris 10 machine without zones/containers without any problems.
Can you please help me figure out what am I missing. Is there something specific with zones/containers that should be set / configured?
Do I have to set some specific env. variables to work in a Solaris 8 zone/container environment or is it something very simple that I'm missing?

Could you please examine the truss log and advice what the problem is and how to fix it?
(some lines deleted)
bash-2.03# truss -f -p 18361 #### /usr/sbin/inetd -s -t &
18361: poll(0xFFBFF528, 53, -1)        (sleeping...)
18361: poll(0xFFBFF528, 53, -1)                        = 1
18361: accept(63, 0xFFBFF870, 0xFFBFF914, 1)           = 3
18361: sigprocmask(SIG_BLOCK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
18361: fork()                                          = 1921
1921:   fork()          (returning as child ...)        = 18361
1921:   sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
1921:   lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: close(3)                                        = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
1921:   lwp_sigtimedwait(0xFFBFF668, 0xFFBFF528, 0x00000020) = 0
1921:   sigaction(SIGHUP, 0xFFBFF528, 0xFFBFF500)       = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF5F0, 0x00000010) = 0
1921:   lwp_sigtimedwait(0xFFBFF508, 0xFFBFF458, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921:   sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921:   lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
1921:   lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
1921:   fcntl(3, F_DUP2FD, 0x00000000)                  = 0
1921:   close(3)                                        = 0
1921:   fcntl(0, F_DUP2FD, 0x00000001)                  = 1
1921:   fcntl(0, F_DUP2FD, 0x00000002)                  = 2
1921:   open64("/etc/.name_service_door", O_RDONLY)     = 3
1921:   fcntl(3, F_SETFD, 0x00000001)                   = 0
1921:   door_info(3, 0xFF0C2748)                        = 0
1921:   door_call(3, 0xFFBFF278)                        = 0
1921:   close(67)                                       Err#9 EBADF
1921:   close(66)                                       Err#9 EBADF
1921:   close(65)                                       Err#9 EBADF
1921:   close(64)                                       Err#9 EBADF
1921:   close(63)                                       = 0
1921:   close(62)                                       = 0
1921:   close(12)                                       = 0
1921:   close(11)                                       = 0
1921:   close(10)                                       Err#9 EBADF
1921:   close(9)                                        Err#9 EBADF
1921:   close(8)                                        Err#9 EBADF
1921:   close(7)                                        Err#9 EBADF
1921:   close(6)                                        Err#9 EBADF
1921:   close(5)                                        Err#9 EBADF
1921:   close(4)                                        Err#9 EBADF
1921:   setrlimit(RLIMIT_NOFILE, 0xFFBFFD20)            = 0
1921:   xenix(398872, 0xFFBFF5E4, 0x00000040)           = 38
1921:   execve("/tmp/srv/t_srv", 0x0008B5FC, 0xFFBFFDA0) argc = 0
1921:   getuid()                                        = 0 [0]
1921:   resolvepath("/usr/lib/ld.so.1", "/usr/lib/ld.so.1", 1023) = 16
1921:   open("/var/ld/ld.config", O_RDONLY)             = 3
1921:   fstat(3, 0xFFBFF5E8)                            = 0
1921:   mmap(0x00000000, 148, PROT_READ, MAP_SHARED, 3, 0) = 0xFF3E0000
1921:   close(3)                                        = 0
1921:   stat("/usr/lib/libc.so.1", 0xFFBFF648)          = 0
1921:   resolvepath("/usr/lib/libc.so.1", "/usr/lib/libc.so.1", 1023) = 18
1921:   open("/usr/lib/libc.so.1", O_RDONLY)            = 3
1921:   mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xFF340000
1921:   mmap(0x00000000, 802816, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF200000
1921:   mmap(0xFF200000, 703520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF200000
1921:   mmap(0xFF2BC000, 24772, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 704512) = 0xFF2BC000
1921:   munmap(0xFF2AC000, 65536)                       = 0
1921:   memcntl(0xFF200000, 113528, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1921:   close(3)                                        = 0
1921:   stat("/usr/lib/libdl.so.1", 0xFFBFF648)         = 0
1921:   resolvepath("/usr/lib/libdl.so.1", "/usr/lib/libdl.so.1", 1023) = 19
1921:   open("/usr/lib/libdl.so.1", O_RDONLY)           = 3
1921:   mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921:   mmap(0x00000000, 8192, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF330000
1921:   mmap(0xFF330000, 2638, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF330000
1921:   close(3)                                        = 0
1921:   stat("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", 0xFFBFF368) = 0
1921:   resolvepath("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", "/usr/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 41
1921:   open("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", O_RDONLY) = 3
1921:   mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921:   close(3)                                        = 0
1921:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF320000
1921:   dup(0)                                          = 3
1921:   llseek(0, 0, SEEK_CUR)                          Err#29 ESPIPE
1921:   close(0)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000000)                  = 0
1921:   close(3)                                        = 0
1921:   dup(1)                                          = 3
1921:   close(1)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000001)                  = 1
1921:   close(3)                                        = 0
1921:   dup(2)                                          = 3
1921:   close(2)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000002)                  = 2
1921:   close(3)                                        = 0
1921:   sys#177(0x00000080, 0xFFBFFB7C, 0xFF3F0518, 0x00000000, 0xFF3C2EF8, 0xFF2C0284) = 0x00000000 [0xFFBFFB7C]
1921:   sys#227(0x00000006, 0x00000000, 0x0001ADF0, 0xFF3F0518, 0xFF3C3C18, 0xFF3C2670) = 0x0000000C [0x00000000]
1921:   sys#227(0x00000002, 0x0000000C, 0x0000000E, 0xFFBFFCAE, 0x00000002, 0xFF3C2670) = 0x00000002 [0x00000000]
1921:       Incurred fault #6, FLTBOUNDS %pc = 0xFF232E2C
1921:         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921:       Received signal #11, SIGSEGV [default]
1921:         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921:           *** process killed ***
18361:      Received signal #18, SIGCLD, in poll() [caught]
18361:        siginfo: SIGCLD CLD_DUMPED pid=1921 status=0x000B
18361: poll(0xFFBFF528, 53, -1)                        Err#4 EINTR
18361: lwp_sigtimedwait(0xFFBFF218, 0xFFBFF140, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF130, 0xFFBFF218, 0x00000010) = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFEF28)          = 0
18361: poll(0xFFBFF528, 53, -1)        (sleeping...)Thank you in advance

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Convert Solaris 10 zones to Logical Domain

Similar Messages

Maybe you are looking for