Convert spool to PDF and send as email attachment
When i try to convert SAP spool to PDF and send it as email attachment, size of PDF document becomes large as compared to size of the PDF cocument i download using the same spool.
I am using following FMs.
CONVERT_ABAPSPOOLJOB_2_PDF to convert spool to PDF
and
SO_NEW_DOCUMENT_ATT_SEND_API1 to send email with attchment.
some times size of attchment exceeds 2MB and email results in error in SAP connect (SOST).
Any idea on how to compress the PDF attchment??
Thanks
Hi Venkat,
Can you plesae assist me.
I have a requirement to convert spool to pdf
send an email to users
issue is that attachement is big cant go through
I have used compress, but when I open the pdf file error that file was not correclty decoded
please assist, anyone
Similar Messages
-
Convert spool to pdf and send in email sometimes attachment duplicated.
Hi all, I have a process that creates a spool, converts it to a pdf and then attaches it to an email. My problem is that sometimes, the same attachment is duplicated.
The process seems to work fine in debug mode (the attachment changes for each loop) but when I run it in the background, every few emails, it will duplicate an attachment.
I have noticed that the size of the pdf seems to change properly but that the content of the pdf does not match. So, it is like it gets the correct size of the pdf but not the body.
This is code that a consultant wrote and I am pretty new to abap/sap. I have changed some of the code because it was trying to handle an endless loop (I figured it should not have to handle (be in) an endless loop). I changed that code and it is working but this previous issue still exists. Thanks for your help.
*& Form PROCESS_EMPLOYEE
FORM process_employee .
* process appraisal only
IF it_final[] IS NOT INITIAL .
* READ DISTRIBUTION LIST *
REFRESH : it_email, it_idlient.
*Sort by supervisor
SORT it_final[] BY supervisor.
LOOP AT it_final INTO wa_final .
APPEND wa_final TO it_final1 .
AT END OF supervisor .
* Perform to create the PDF from the Output
report = 'zhr_pm_appemail'.
PERFORM create_pdf using report.
** Perform to email the PDF attachment
** to the supervisor and the Mailing list
subject = 'Performance Appraisals'.
PERFORM process_email using subject.
REFRESH it_final1 .
CLEAR it_final1 .
CLEAR wa_final .
FREE MEMORY ID 'MEM'.
ENDAT .
ENDLOOP.
ENDIF.
ENDFORM. " PROCESS_EMPLOYEE
*& Form CREATE_PDF
FORM create_pdf using report.
DATA: spoolno TYPE tsp01-rqident.
DATA : p_repid TYPE sy-repid .
DATA: v_len TYPE i , v_len1 TYPE i .
DATA: v_temp(8) TYPE c .
DATA: p_uname TYPE sy-uname .
DATA: it_tsp01 TYPE STANDARD TABLE OF tsp01 WITH HEADER LINE .
* DATA: it_pdf TYPE tline OCCURS 0 WITH HEADER LINE .
TABLES: tsp01.
DATA: var TYPE c .
*-- STRUCTURES
DATA:
lc_rq2name TYPE tsp01-rq2name.
DATA:
mstr_print_parms TYPE pri_params,
mc_valid(1) TYPE c,
mi_bytecount TYPE i,
mi_length TYPE i,
mi_rqident TYPE tsp01-rqident.
*-- INTERNAL TABLES
DATA:
mtab_pdf TYPE tline OCCURS 0 WITH HEADER LINE,
mc_filename TYPE rlgrap-filename.
*-- SELECTION SCREEN
DATA:
p_linsz TYPE sy-linsz VALUE 80, " Line size
p_paart TYPE sy-paart VALUE 'X_65_80'. " Paper Format
p_uname = sy-uname .
var = var + 1.
p_repid = report.
* START-OF-SELECTION .
concatenate p_repid+0(9)
p_uname+0(3)
into mc_filename
separated by '_'.
translate mc_filename to upper case.
*-- Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
IMPORTING
out_parameters = mstr_print_parms
valid = mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc = 0 .
*--Make sure that a printer destination has been set up. If this is not done the PDF module abends.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
EXPORT it_final1 it_email p_email1 p_sender p_date vl_nmth
TO MEMORY ID 'MEM' .
IF report = 'zhr_pm_appandprogemail'.
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
IF report = 'zhr_pm_appemail'.
SUBMIT zhr_pm_appemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
ENDIF.
*Find out what the spool number is that was just created
perform get_spool_number using p_repid p_uname changing mi_rqident.
*converting the spool request into pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
IMPORTING
pdf_bytecount = mi_bytecount
TABLES
pdf = it_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
* call function 'DOWNLOAD'
* exporting
* bin_filesize = mi_bytecount
* filename = mc_filename
* filetype = 'BIN'
* importing
* act_filename = mc_filename
* tables
* data_tab = it_mess_att.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf INTO wa_pdf.
TRANSLATE wa_pdf USING ' ~'.
CONCATENATE v_gd_buffer wa_pdf INTO v_gd_buffer.
CLEAR wa_pdf .
ENDLOOP.
TRANSLATE v_gd_buffer USING '~ '.
DO.
it_mess_att = v_gd_buffer.
APPEND it_mess_att.
SHIFT v_gd_buffer LEFT BY 255 PLACES.
IF v_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " CREATE_PDF
* FORM get_spool_nunber *
* Get the most recent spool created by user/report *
form get_spool_number using f_repid
f_uname changing f_rqident.
data:
lc_rq2name TYPE rlgrap-filename.
concatenate f_repid+0(6)
f_repid+7(3)
f_uname+0(3)
into lc_rq2name.
* separated by '_'.
translate lc_rq2name to upper case.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform. " get spool number
*& Form SEND_MAIL
FORM send_email USING p_email subject.
REFRESH it_mess_bod.
* Default subject matter
gd_subject = text-019 ."'Subject'.
gd_attachment_desc = text-020 ."'Performance Appraisal'.
IF subject = 'Performance Appraisals and Progression I'.
gd_attachment_desc = 'PerfAppAndProg'.
ENDIF.
IF subject = 'Performance Appraisals'.
gd_attachment_desc = 'PerfAppraisal'.
ENDIF.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .pdf
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email
subject
'PDF'
gd_attachment_desc
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " SEND_MAIL
* FORM process_email *
FORM process_email using subject.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1 subject.
* perform send_email using p_email2.
ENDFORM. "process_email
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
CLEAR : ld_email , ld_mtitle , ld_format , ld_attdescription ,
ld_attfilename , ld_sender_address , ld_sender_address_type ,
w_doc_data.
REFRESH: t_packing_list.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
LOOP AT it_email.
* Add the recipients email address
t_receivers-receiver = it_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
* CONTENTS_HEX = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
PERFORM update_infotype_0019 .
ENDIF.
* Populate zerror return code
* ld_error = sy-subrc.
** stop .
* READ TABLE t_receivers WITH KEY retrn_code = '0' .
* IF sy-subrc = 0 .
* v_update_flag = '1' .
* EXPORT v_update_flag TO MEMORY ID 'MEM2' .
* ENDIF .
** Populate zreceiver return code
* LOOP AT t_receivers.
* ld_receiver = t_receivers-retrn_code.
* ENDLOOP.
ENDFORM. "send_file_as_email_attachment
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 12:30 AMThank you for your response, this has allowed me to identify the problem. It is when I create the spool by using the code below. If I add a wait after this, the program works successfully. Is there another way to write the data to create a spool within my initial program rather than doing the submit? Could it be that it is putting data in memory?
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
*& Report ZHR_PM_APPANDPROGEMAIL
REPORT ZHR_PM_APPANDPROGEMAIL
NO STANDARD PAGE HEADING
LINE-SIZE 80
LINE-COUNT 65(8).
* MESSAGE-ID zhr.
* INTERNAL TABLES DECLARATION
DATA: it_pdf TYPE tline OCCURS 0 ." WITH HEADER LINE .
* WORK AEA DECLARATION
DATA: wa_pdf TYPE tline .
* Spool to PDF conversions
*DATA: "gd_spool_nr TYPE tsp01-rqident,
* gd_destination TYPE rlgrap-filename,
* gd_bytecount TYPE tst01-dsize,
DATA:v_update_flag TYPE c . "flag for updating infotype 41 last appraisal date
DATA: v_gd_buffer TYPE string.
DATA: BEGIN OF it_final1 OCCURS 0 ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
subgroup TYPE persk ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
darxx(5) TYPE c,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final1 .
DATA: t_packing_list TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers TYPE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header TYPE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data TYPE sodocchgi1 .
DATA: gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: v_flag TYPE c VALUE '1' .
DATA: BEGIN OF it_final OCCURS 0 ,
subgroup TYPE persk ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final .
DATA:it_t247 TYPE STANDARD TABLE OF t247 WITH HEADER LINE .
DATA: it_email TYPE STANDARD TABLE OF zemail WITH HEADER LINE.
*VARIABLE DECLARATION
DATA: p_date TYPE sy-datum , "excution date
vl_date TYPE sy-datum ,
p_email1 TYPE somlreci1-receiver , "receiver
p_sender TYPE somlreci1-receiver . "sender
DATA: w_recsize TYPE i.
DATA: gd_recsize TYPE i.
DATA : vl_nmth TYPE sy-datum.
DATA: v_month(2) TYPE n .
DATA: v_mon_text TYPE t247-ltx .
*START OF SELECTION
START-OF-SELECTION .
REFRESH t_receivers.
IMPORT it_final1 it_email p_email1 p_sender p_date vl_nmth FROM MEMORY ID 'MEM'.
PERFORM get_next_month .
LOOP AT it_final1 .
IF it_final1-progression IS NOT INITIAL.
MOVE-CORRESPONDING it_final1 TO it_final .
APPEND it_final .
CLEAR it_final .
* Add the recipients email address
t_receivers-receiver = it_final1-email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDIF.
ENDLOOP .
PERFORM write_output .
*END OF SELECTION
END-OF-SELECTION .
*& Form WRITE_OUTPUT
FORM write_output .
DATA: l_date(14) TYPE c ,
l_date_temp(14) TYPE c ,
v_date(10) TYPE c ,
v_date1(20) TYPE c ,
v_date1_temp(20) TYPE c ,
f_date(10) TYPE c.
DATA: lv_stext TYPE t503t-ptext .
CLEAR : v_date, v_date1.
CONCATENATE p_date+4(02) p_date+6(02) p_date+0(04)'.' INTO v_date.
CONCATENATE v_mon_text p_date+0(4) INTO l_date_temp SEPARATED BY space.
CONCATENATE l_date_temp '.' INTO l_date.
CONCATENATE v_mon_text vl_nmth+6(2) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp ',' INTO v_date1_temp.
CONCATENATE v_date1_temp vl_nmth(4) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp '.' INTO v_date1.
CONDENSE l_date .
FORMAT INTENSIFIED ON.
SKIP 4.
WRITE:/(80) text-001 CENTERED . "'METROPOLITAN UTILITIES DISTRICT'.
WRITE:/(80) text-002 CENTERED . "'OMAHA NEBR.'.
SKIP 2.
WRITE:/(80) text-003 CENTERED . "'Inter-Departmental Communication'.
FORMAT INTENSIFIED OFF.
WRITE :/(80) v_date CENTERED using edit mask '__/__/____'. " v_date.
SKIP 2.
WRITE: /10 text-004. "'SUBJECT: Performance Appraisals and Progression Increase'.
SKIP 1.
WRITE: /10 text-005, it_final1-supervisor_desc. "'TO: Supervisor'.
SKIP 1.
WRITE: /10 text-006. "'FROM: Anne M. Undajon, Director of Compensation and Benefits'.
SKIP 2.
WRITE:/10 text-007 . "'Listed below are the employees in your area who are due a '.
WRITE:/10 text-008 ,l_date. "'Performance Appraisal during the month of ',l_date.'. "v_mon_text , P_date+0(4)
WRITE:/10 text-009 . "'These employees are also eligible for a progression increase.
WRITE:/10 text-010 . "' A performance appraisal form can be found on-line in the MUD '.
WRITE:/10 text-011 . "'template section. The Performance Appraisal is to be completed '
WRITE:/10 text-012 . "'and discussed with the employee by the immediate supervisor.'
SKIP 2.
WRITE:/10 text-013. "Signed forms should be returned to the Human Resource Department by '.
WRITE:/10 v_date1.
SKIP 2 .
SORT it_final[] BY subgroup .
LOOP AT it_final .
CLEAR: lv_stext .
lv_stext = it_final-stext.
AT NEW subgroup .
TRANSLATE lv_stext TO UPPER CASE .
WRITE:/(80) lv_stext CENTERED .
SKIP 2 .
WRITE: 10 text-014 . "'Employee name' .
WRITE: 32 text-015 . "'Job Date' .
WRITE :44 text-016 . "'Last Appraisal' .
WRITE :59 text-021 . "'Employee' .
WRITE :/10 '--------------------' , 32'----------', 44 '--------------', 59 '--------'.
ENDAT .
WRITE:/10 it_final-ename .
WRITE: 32 it_final-lastjob using edit mask '__/__/____'.
CONCATENATE it_final-lastapp+4(02) it_final-lastapp+6(02) it_final-lastapp+0(04) INTO f_date.
WRITE :44 f_date using edit mask '__/__/____'.
SHIFT it_final-pernr left deleting leading '0'.
WRITE : 59 it_final-pernr.
SKIP 2 .
ENDLOOP.
SKIP 4.
WRITE :10 text-017. "'Anne M. Undajon'.
FORMAT INTENSIFIED ON.
WRITE:/10 text-018. "'Director of Compensation & Benefits'.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_OUTPUT
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 4:07 PM -
Converting Smartform to PDF and send as email attachment
Hi
I want to send the Smartform to mail as PDF attachment.
I found the program in code gallery., it name was 'ZTEST_NREDDY_PDF_MAIL' .
I used this program and it send the Smartform to mail as PDF attachment but when open the pdf file it gave me error.
error : 'An unrecognized token Qq was found'.
Please help me out.
Thanks
AninaHi,
Following is the code logic:
Tables for OTF to PDF Conversion
DATA: g_t_docs TYPE STANDARD TABLE OF docs, " Table for Stored Document
g_t_lines TYPE STANDARD TABLE OF tline. " Table for Text lines
Objects to send mail.
DATA: g_t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, " SAPoffice: Description of Imported Object Components
g_t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_contout LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE. " SAPoffice: Structure of the API Recipient List
Addresses (Business Address Services)
DATA: g_t_adrc LIKE adrc OCCURS 0,
g_t_adrc2 LIKE adrc OCCURS 0,
g_t_adrc3 LIKE adrc OCCURS 0,
g_t_adrc_wa TYPE adrc,
g_t_adrc2_wa TYPE adrc,
g_t_adrc3_wa TYPE adrc.
Sales Document: Partner
DATA: g_t_vbpa_wa TYPE vbpa.
E-Mail Addresses (Business Address Services)
DATA: g_t_adr6 LIKE adr6 OCCURS 0,
g_t_adr6_2 LIKE adr6 OCCURS 0,
g_t_adr6_wa TYPE adr6,
g_t_adr6_2_wa TYPE adr6.
DATA:
Work Area declarations
g_wa_objhead TYPE soli_tab, " Work Area for Objcont and Objhead as Table Type
g_wa_doc_chng TYPE sodocchgi1, " Work Area - Data of an object which can be changed
Variables declarations
g_lines_txt TYPE i,
g_lines_bin TYPE i,
g_email_id(40) VALUE '', " E-mail Address
PDF related data declarations
g_wa_job_output_info TYPE ssfcrescl, " Smart Forms: Return value at end of form printing
g_wa_control_parameters TYPE ssfctrlop,"#EC NEEDED " Smart Forms: Control structure
g_name TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_filename TYPE string,
g_filter TYPE string,
g_bin_filesize TYPE i,
g_uact TYPE i,
g_guiobj TYPE REF TO cl_gui_frontend_services.
PERFORM f0100_download_pdf.
PERFORM f200_convert_to_pdf.
PERFORM f300_attach_and_mail_pdf.
*& Form f0100_download_pdf
To Download the PDF Format of SmartForm on
Presentation Server
FORM f0100_download_pdf. "#EC CALLED
Downloading PDF File
CREATE OBJECT g_guiobj.
CALL METHOD g_guiobj->file_save_dialog
EXPORTING
default_extension = 'pdf'
default_file_name = g_name
file_filter = g_filter
CHANGING
filename = g_name
path = g_path
fullpath = g_fullpath
user_action = g_uact.
IF g_uact = g_guiobj->action_cancel.
EXIT.
ENDIF.
MOVE g_fullpath TO g_filename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = g_bin_filesize
filename = g_filename
filetype = 'BIN'
TABLES
data_tab = g_t_lines.
ENDFORM. "f0100_download_pdf
*& Form f0200_convert_to_pdf
To convert the SmartForm to PDF format
FORM f0200_convert_to_pdf . "#EC CALLED
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = g_bin_filesize
TABLES
otf = g_wa_job_output_info-otfdata
doctab_archive = g_t_docs
lines = g_t_lines.
CONCATENATE text-001 g_sales_order_no '.pdf' INTO g_name.
ENDFORM. " f0200_convert_to_pdf
*& Form f0300_attach_and_mail_pdf
To E-Mail the PDF form as an Attachment
FORM f0300_attach_and_mail_pdf . "#EC CALLED
Attachment
REFRESH: g_t_reclist,
g_t_objtxt,
g_t_objbin,
g_t_objpack.
CLEAR g_wa_objhead.
Create Message Body Title and Description
g_t_objtxt = g_name.
APPEND g_t_objtxt.
DESCRIBE TABLE g_t_objtxt LINES g_lines_txt.
READ TABLE g_t_objtxt INDEX g_lines_txt.
g_wa_doc_chng-obj_name = g_name.
g_wa_doc_chng-expiry_dat = sy-datum + 10.
g_wa_doc_chng-obj_descr = g_name.
g_wa_doc_chng-sensitivty = 'F'.
g_wa_doc_chng-doc_size = g_lines_txt * 255.
Main Text
CLEAR g_t_objpack-transf_bin.
g_t_objpack-head_start = 1.
g_t_objpack-head_num = 0.
g_t_objpack-body_start = 1.
g_t_objpack-body_num = g_lines_txt.
g_t_objpack-doc_type = 'RAW'.
APPEND g_t_objpack.
Attachment (PDF-Attachment)
g_t_objpack-transf_bin = 'X'.
g_t_objpack-head_start = 1.
g_t_objpack-head_num = 0.
g_t_objpack-body_start = 1.
Convert TLINE to SOLISTI1
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_src = 134
line_width_dst = 255
TABLES
content_in = g_t_lines
content_out = g_t_contout
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE s000(0k) WITH text-002.
EXIT.
ENDIF.
Create Message Attachment
APPEND LINES OF g_t_contout[] TO g_t_objbin[].
DESCRIBE TABLE g_t_objbin LINES g_lines_bin.
READ TABLE g_t_objbin INDEX g_lines_bin.
g_t_objpack-doc_size = g_lines_bin * 255 .
g_t_objpack-body_num = g_lines_bin.
g_t_objpack-doc_type = 'PDF'.
g_t_objpack-obj_name = text-003.
g_t_objpack-obj_descr = text-004.
APPEND g_t_objpack.
CLEAR g_t_reclist.
g_t_reclist-receiver = g_email_id.
g_t_reclist-rec_type = 'U'.
APPEND g_t_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = g_wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = g_t_objpack
object_header = g_wa_objhead
contents_bin = g_t_objbin
contents_txt = g_t_objtxt
receivers = g_t_reclist.
ENDFORM. " f0300_attach_and_mail_pdf -
Convert spool to PDF and send Email in background
Hi Friends,
I would like to execute one of my programs in background.
Once I get the spool number of that program, I would like to convert into PDF format and send it as attachement to external mail address.Pl give your suggestions.
Regards
Elini.PHave also a look at the thread https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Re: Sending mail in PDF format in background
See also https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Sending by email attached documents
There is also this excellent weblog by Thomas Jung.
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface -
Smartform (otf) as pdf and sending as email-attachment
Hello everybody,
when trying to convert a smartform to pdf and sending it with the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' i get an error when opening the pdf-file. It says ' a non identified Token w62.10 was found' and the pdf is all empty.
The problem seems to be somewhere between getting the pdf output data from the FM 'convert_otf' and trying to create a bin-object for the attachment.
Here is the code:
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
* max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
* wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt ).
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = ( v_lines_bin - 1 ) * 255 + strlen( i_objbin ).
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = receiver.
i_reclist-rec_type = RECEIVER_TYPE.
append i_reclist.
if not receiver is initial.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.Hi,
I just observed the following.
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132 IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
I just tried with your coding and then changed to the below coding.Now I am able to open the PDF in mail.
* Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
* Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
* Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
* Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
* wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
If your problem is solved,kindly close the thread and reward points.If you need clarifications,get back. -
Error - While converting Smartform to PDF and send in Email
HI all,
I am getting error while opening the PDF file. i searched in SDN but I am not able to figure out what is the correct issues.
Please find the piece of code.
* Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = ls_jobout_info-otfdata[].
* Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
** max_linewidth = 134
max_linewidth = 132
IMPORTING
** bin_file = ts_file
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
* Passing the SAP Script text lines to SAPoffice: Single List with Column Length 255 table
DATA:
* gv_bin_filesize TYPE i, " Store the file size
gv_pos TYPE i,
gv_len TYPE i,
gv_tab_lines TYPE i.
CLEAR : gs_objbin, gs_pdf_tab.
LOOP AT gt_pdf_tab INTO gs_pdf_tab.
gv_pos = 255 - gv_len.
IF gv_pos > 134. "length of pdf_table
gv_pos = 134.
ENDIF.
gs_objbin+gv_len = gs_pdf_tab(gv_pos).
gv_len = gv_len + gv_pos.
IF gv_len = 255. "length of out (contents_bin)
APPEND gs_objbin TO gt_objbin.
CLEAR: gs_objbin, gv_len.
IF gv_pos < 134.
gs_objbin = gs_pdf_tab+gv_pos.
gv_len = 134 - gv_pos.
ENDIF.
ENDIF.
ENDLOOP.
IF gv_len > 0.
APPEND gs_objbin TO gt_objbin.
ENDIF.
* Filling the details in SAPoffice: Description of Imported Object Components table
DESCRIBE TABLE gt_objbin LINES gv_tab_lines.
CLEAR gs_objbin.
READ TABLE gt_objbin INTO gs_objbin INDEX gv_tab_lines.
IF sy-subrc = 0.
gs_objpack-doc_size = ( gv_tab_lines - 1 ) * 255 + STRLEN( gs_objbin ).
gs_objpack-transf_bin = 'X'.
gs_objpack-head_start = 1.
gs_objpack-head_num = 0.
gs_objpack-body_start = 1.
gs_objpack-body_num = gv_tab_lines.
gs_objpack-doc_type = 'PDF'.
gs_objpack-obj_name = l_title.
gs_objpack-obj_descr = w_output-tdtitle.
APPEND gs_objpack TO gt_objpack.
ENDIF.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = p_doc_chng
put_in_outbox = 'X'
sender_address = p_w_sender
sender_address_type = 'INT'
TABLES
packing_list = p_objpack
** object_header = p_objhead
contents_bin = p_objbin
** contents_txt = p_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = p_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
kindly help...email is coming but when i tried to open the PDF file, error saying, " There is error opening a file. thie file is damages and cannot be opened'
thanksHI all,
I am getting error while opening the PDF file. i searched in SDN but I am not able to figure out what is the correct issues.
Please find the piece of code.
* Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = ls_jobout_info-otfdata[].
* Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
** max_linewidth = 134
max_linewidth = 132
IMPORTING
** bin_file = ts_file
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
* Passing the SAP Script text lines to SAPoffice: Single List with Column Length 255 table
DATA:
* gv_bin_filesize TYPE i, " Store the file size
gv_pos TYPE i,
gv_len TYPE i,
gv_tab_lines TYPE i.
CLEAR : gs_objbin, gs_pdf_tab.
LOOP AT gt_pdf_tab INTO gs_pdf_tab.
gv_pos = 255 - gv_len.
IF gv_pos > 134. "length of pdf_table
gv_pos = 134.
ENDIF.
gs_objbin+gv_len = gs_pdf_tab(gv_pos).
gv_len = gv_len + gv_pos.
IF gv_len = 255. "length of out (contents_bin)
APPEND gs_objbin TO gt_objbin.
CLEAR: gs_objbin, gv_len.
IF gv_pos < 134.
gs_objbin = gs_pdf_tab+gv_pos.
gv_len = 134 - gv_pos.
ENDIF.
ENDIF.
ENDLOOP.
IF gv_len > 0.
APPEND gs_objbin TO gt_objbin.
ENDIF.
* Filling the details in SAPoffice: Description of Imported Object Components table
DESCRIBE TABLE gt_objbin LINES gv_tab_lines.
CLEAR gs_objbin.
READ TABLE gt_objbin INTO gs_objbin INDEX gv_tab_lines.
IF sy-subrc = 0.
gs_objpack-doc_size = ( gv_tab_lines - 1 ) * 255 + STRLEN( gs_objbin ).
gs_objpack-transf_bin = 'X'.
gs_objpack-head_start = 1.
gs_objpack-head_num = 0.
gs_objpack-body_start = 1.
gs_objpack-body_num = gv_tab_lines.
gs_objpack-doc_type = 'PDF'.
gs_objpack-obj_name = l_title.
gs_objpack-obj_descr = w_output-tdtitle.
APPEND gs_objpack TO gt_objpack.
ENDIF.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = p_doc_chng
put_in_outbox = 'X'
sender_address = p_w_sender
sender_address_type = 'INT'
TABLES
packing_list = p_objpack
** object_header = p_objhead
contents_bin = p_objbin
** contents_txt = p_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = p_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
kindly help...email is coming but when i tried to open the PDF file, error saying, " There is error opening a file. thie file is damages and cannot be opened'
thanks -
Making spool, convert it into PDF and send that PDf throgh EMAIl
Hi,
In my making ALV report. In that i want to make the spool and then convert it into the pdf and send mail to the recepient.
AtulHi,
please try the following code. It works for me.
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
DATA : path LIKE pcfile-path.
DATA : extension(5) TYPE c.
DATA : name(100) TYPE c.
DATA:receiver TYPE somlreci1-receiver ,
p_file LIKE rlgrap-filename.
declarations for PDF convertion
DATA: path1 TYPE string ,
fullpath TYPE string.
DATA :textlines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA otf LIKE itcoo OCCURS 1000 WITH HEADER LINE.
DATA it_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA options LIKE itcpo.
DATA header LIKE thead.
DATA result LIKE itcpp.
DATA: bin_filesize TYPE i.
fullpath type string.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA: filesize TYPE i,
convcount TYPE i,
cancel(1).
textlines-tdformat = '*'.
textlines-tdline = 'Hello Hao'.
APPEND textlines.
options-tdgetotf = 'X'.
options-tdnoprev = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'PRINTER'
dialog = ' '
header = header
OPTIONS = options
IMPORTING
NEW_ARCHIVE_PARAMS =
RESULT = RESULT
tables
lines = textlines
otfdata = otf
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
UNKNOWN = 6
FORMAT = 7
TEXTFORMAT = 8
COMMUNICATION = 9
BAD_PAGEFORMAT_FOR_PRINT = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = filesize
TABLES
otf = otf
lines = it_lines
EXCEPTIONS
err_conv_not_possible = 1
err_bad_otf = 2.
fullpath = 'C:/foldername/test.pdf'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = fullpath
filetype = 'BIN'
APPEND = ' '
CODEPAGE = ' '
NO_BYTEORDER_MARK = ' '
IMPORTING
FILELENGTH = c
TABLES
data_tab = it_lines
FORMAT_TAB =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6.
*filename = fullpath.
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = 'Tst'.
docdata-obj_descr = 'Testing'.
reclist-receiver = give the mail id.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = fullpath
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = fullpath.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
extension = extension
name = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
invalid_drive = 1
invalid_extension = 2
invalid_name = 3
invalid_path = 4
OTHERS = 5
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT itab.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
objbin+len = itab(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND objbin.
CLEAR: objbin, len.
IF pos < 134.
objbin = itab+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND objbin.
ENDIF.
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
name = extension.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = name.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = name.
APPEND objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
Keerthi -
Convert smartforms to pdf and sending it as email
hi,
i am converting smart form into PDF and sending it as an attachment with the e-mail. the e-mail is getting delivered but i am unable to open the PDF. it shows error saying "unable to open as it is not a supported file type or it has been damaged".
can any one please help me.Hi Gouthaman,
Check this code.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Hope this resolves your query.
Reward all the helpful answers.
Regards -
Reg: Converting Standard Payslip (PC00_M99_CEDT) to PDF and send via email
Dear Experts,
Please provide me a solution to convert the standard Pay slip (PC00_M99_CEDT) Remuneration statement to PDF and send it via email to individual employee by fetching the email ids through the info types.
I checked the forum, few answers our complete but they have not given the solution.
Thanks in advance
Abdur
Moderator message: moved to requirements forum (points-free!)
Edited by: Thomas Zloch on Feb 7, 2011 11:53 AM
Moderator message: moved back to ABAP General.
Edited by: Thomas Zloch on Feb 9, 2011 1:03 PMDear Experts,
As suggested, I have written the below code.
REPORT ztest_period.
DATA : td_listobject LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: txtlines(1024) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: list_tab TYPE TABLE OF abaplist,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE.
SUBMIT rpcedtx0 VIA SELECTION-SCREEN EXPORTING LIST TO MEMORY AND RETURN.
CLEAR td_listobject. REFRESH td_listobject.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = td_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CHECK sy-subrc = 0.
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = td_listobject
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
&code&
I'm getting the raw data from FM 'LIST_FROM_MEMORY' Please tell me how should i convert it to normal data.
Once i get the data, I need to send an email for individual personnel number for the respective month.
Please advice me the next step.
Thanks and Regards,
Abdur Rafique
Edited by: abdur rafique on Feb 21, 2011 11:39 AM -
Convert spool to xls and send the attachment through email
Hello,
I have a requirement to convert spool to xls and then send the xls as an attachment through email,how sould i go about it,which fm can i use please advice..
Thanks.Please check the links
Re: Spool to XLS
Re: converting spool data to xls file format.
Regards
Satish Boguda -
Convert Screen(spool) to PDF file sending mail with attach file
Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = p_spool
first_line = 1
last_line = 0
desired_type = ' '
IMPORTING
real_type = real_type
sp_lang = sp_lang
TABLES
buffer = so_ali
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
+ STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
sender_address = v_name
sender_address_type = 'B'
TABLES
packing_list = plist
contents_bin = so_ali
receivers = rec_tab
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren -
Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('ABM_Infotech_SalesQuote');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report1.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html> -
How to convert a workbook into PDF and broadcast as Email attachment
Hello Gurus,
i have installed the ADS (Adobe Document services). I would like to broadcast workbooks as a pdf file to some user.
When i open the workbook and go to Broadcast --> Setup a broadcast setting for this workbook. The distribution type is
Broadcast E-mail; Broadcast E-mail (Bursting); Broadcast Portal; Broadcast Multichannel and Output Format only MS Workbook and Link to current Data. Here i miss the possibility as PDF.
Where can i set up that the workbook should be broadcast as PDF.
Any help appreciated.
Thanks and kind rgerads,
MuratThanks all for your answers,
i also read that with changing the format in Report designer then broadcasting via PDF. Is there no possibility for PDFs for MS Excel Workbooks? How does it work when opening the query in Report designer? What do i have to do there but it is no solution for us because in the workbooks we use GET BEX DATA formulas and just show parts of the analyisis grid. I need a proper solution how to use broadcaster converting workbooks into PDF an send them as email attachment
Thanks,
Murat -
Convert ABAP Report to HTML & Send External Email Attachment
Hi,
I have a requirement described as below. A report is scheduled to run in the background creates a spool, to be converted to HTML format and send to Third Parties (External Email ID's) via Email. Please let me know whether the requirement is not clear. Can you please suggest me a suitable SAP Solution for this requirement?
Thanks,
Kannan.SAHi,
See below simple report to convert the internal table data to a HTML format data and stores in a internal table and then pass that internal table as an attachment to the external email using function module SO_NEW_DOCUMENT_ATT_SEND_API1.
You need for create a spool also.
REPORT Z_HTML .
include <icon>.
types: begin of msg,
type like icon-id,
text(140) type c,
end of msg.
constants: gc_marked type c value 'X',
gc_ok like icon-id value '@5B@'.
data:
gt_msg type standard table of msg,
gs_msg like line of gt_msg,
gv_msg(138) type c,
*-- html
html_container type ref to cl_gui_custom_container,
html_control type ref to cl_gui_html_viewer,
my_row_header like w3head occurs 10 with header line,
my_fields like w3fields occurs 10 with header line,
my_header like w3head,
my_html type standard table of w3html ,
ok_code like sy-ucomm.
Start of Selection *
start-of-selection.
clear gv_msg.
gv_msg = 'MESSAGES for HTML'.
do 3 times.
perform message using gc_ok gv_msg .
enddo.
End of Selection *
end-of-selection.
set screen 0100.
*& Form message
form message using p_type
p_text.
clear gs_msg.
gs_msg-type = p_type.
gs_msg-text = p_text.
append gs_msg to gt_msg.
endform. " MESSAGE
*& Module STATUS_0100 OUTPUT
module status_0100 output.
perform convert_itab_html.
set titlebar '100' .
set pf-status 'MAIN100'.
create object html_container
exporting
container_name = 'CONTAINER'.
create object html_control
exporting
parent = html_container
saphtmlp = gc_marked .
data: assigned_url type url.
call method html_control->load_data
EXPORTING
URL = url
TYPE = 'text'
SUBTYPE = 'html'
SIZE = 0
ENCODING =
CHARSET =
importing
assigned_url = assigned_url
changing
data_table = my_html
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_GENERAL = 2
CNTL_ERROR = 3
others = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call method html_control->show_url
exporting
url = assigned_url
FRAME =
IN_PLACE = ' X'
EXCEPTIONS
CNTL_ERROR = 1
CNHT_ERROR_NOT_ALLOWED = 2
CNHT_ERROR_PARAMETER = 3
DP_ERROR_GENERAL = 4
others = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Module exit INPUT
module exit input.
leave program.
endmodule. " exit INPUT
*& Module user_command_0100 INPUT
text
module user_command_0100 input.
case ok_code.
when 'EXIT' or 'BACK'.
leave program.
when others.
call method cl_gui_cfw=>dispatch.
endcase.
endmodule. " user_command_0100 INPUT
*& Form convert_itab_html
form convert_itab_html.
data: lv_tabix like sy-tabix.
*-- table header
call function 'WWW_ITAB_TO_HTML_HEADERS'
exporting
field_nr = 1
text = 'Type'
fgcolor = 'navy'
bgcolor = 'red'
font = 'Arial'
tables
header = my_row_header.
call function 'WWW_ITAB_TO_HTML_HEADERS'
exporting
field_nr = 2
text = 'Message'
fgcolor = 'navy'
bgcolor = 'red'
font = 'Arial'
tables
header = my_row_header.
*-- table rows
clear lv_tabix.
loop at gt_msg into gs_msg.
lv_tabix = sy-tabix.
call function 'WWW_ITAB_TO_HTML_LAYOUT'
exporting
field_nr = 1
line_nr = lv_tabix
icon = gc_marked
tables
fields = my_fields.
call function 'WWW_ITAB_TO_HTML_LAYOUT'
exporting
field_nr = 2
line_nr = lv_tabix
fgcolor = 'red'
bgcolor = 'black'
font = 'Arial'
size = '2'
tables
fields = my_fields.
endloop.
*-- header
move 'Messages during program run' to my_header-text.
move 'Arial' to my_header-font.
move '2' to my_header-size.
move 'Centered' to my_header-just.
move 'red' to my_header-bg_color.
move 'blue' to my_header-fg_color.
refresh my_html.
call function 'WWW_ITAB_TO_HTML'
exporting
table_header = my_header
all_fields = ' '
tables
html = my_html
fields = my_fields
row_header = my_row_header
itable = gt_msg.
endform. "convert_itab_html -
CONVERT SCANNED FILE TO PDF AND SEND TO EMAIL!
I got many files that were scanned in (110) to be exact. I need to know how to convert the scanned files to pdf and then send them to an email. Thanks Marie
What is the format (file type) of these scanned docs?
Maybe you are looking for
-
SSF: verification of third-party signed documents on SAP GUI/AS
Hello everybody, I try to test SSF infrastrucure in SAP R/3 using SAPCRYPTOLIB, however, signing and verification of documents works fine when I use standard system PSE (SAPSYS.pse) and standard server certificate (CN=MEI) only. I need to realize
-
PDC cheques issue and Printing
Dear SAP Friends, We have a functionality of Post dated cheques, my client want to issue the PD cheques 600 at a time with different dates.Please let me know how we can do this in SAP system. 2nd Scenario : Printing of post dated cheque, I am issuing
-
How to start managed server from console?
Hi, After several unsuccesful attempts to start a managed server from admin console, which starts fine by script and stops by console, can somebody please mail me what to enter in the "remote start" tab! The documentation is very uncertain if the pat
-
Hi all, using Flash Player v. 10.1.82.72 on this site: http://http://www.freddynietzsche.com/2009/11/18/quella-stronzata-della-musica-dautore/ I see the second video in a 'compressed' size. How to see it right? Thanks
-
How do i get output module on bridge
so I need to make a contact sheet .. and i have very specific criterias that Photoshop Contact 2 can't do .. but I dont have the output module on my adobe bridge and i can't seem to properly download it