Convert the oracle10g database into standby ( read only mode)

One month ago, converted the oracle 10g standby database into read and write mode( database is open). I would like to convert the oracle10g database into standby
Please provide me the steps or document
Thanks in advance

user8680248 wrote:
two months ago we have convert the standyby database into standard database ( read, write)
NoW I am plannning to convert this database into standby database
any link or steps pleaseDid you meant you would creating(or you have) another standby database and make that standby database as primary and this as standby
If this is not what you meant then there is no way you can make this as sandby database.
Regards
Anurag

Similar Messages

Remove Standby/Read only mode for a database in sql server 2005

Hi,
I have a problem in sql sever . my database is showing standby/read-only mode. i want to remove that mode.please help me for the issue.

HI
Did you assign any DB read only user?
check the administrator guide in your SAP Business one->Documntation->system setup->Administrator guide...
but removing DB read only user is impossible.....

The Index Server is in Read Only Mode

Hi,
In our test environment ALL of our jobs are failing. The message in every failed Job Log is:
11/18/05 10:25:15- Starting to run operations (1 total) for job 'Search Update 2 - Run Once'. Will stop on errors. (PID=14064)11/18/05 10:25:16- *** Job Operation #1 of 1: System Agent 'Search Update Agent' [Run as owner 'Administrator']11/18/05 10:25:16- The index server is in read-only mode.11/18/05 10:25:16- The index Server is inaccessible. Search Update cannot continue and will terminate.11/18/05 10:25:16- *** Job Operation #1 failed: Call to perform operation #1 failed with error (0x80044301): (null) (0x4)11/18/05 10:25:16- Call to perform operation #1 failed with error (0x80044301): (null)
has anybody seen this before, and how can I correct it?
Thanks,Shawn

The search server goes into read only mode in response to certain error conditions. Simply restart the service to put the search server back into R/W mode. The server will attempt to self repair on startup. You should review your recent search server logs to see if there are errors that may have caused the transition to read only mode. If problems persist, contact tech support for further assistance in troubleshooting.

Db Export when database is in read only mode

Hi All,
I have to perform a full database export when database is in read only mode. My db version is 9i.
Kindly let me know whether that export file is valid enough to do full import in new database and make database oprational.
Thanks.

rajaryan wrote:
Hi All,
I have to perform a full database export when database is in read only mode. My db version is 9i.
Kindly let me know whether that export file is valid enough to do full import in new database and make database oprational.
Thanks.Check the log file, if you haven't got any error, then it's valid
BTW - Why you've taken full export of the database? Why not using RMAN?
See the following video tutorial:
http://kamranagayev.wordpress.com/2010/03/29/rman-video-tutorial-series-performing-disaster-recovery-with-rman/

Write-protect mode is currently active. The editor is now in read-only mode

How do i get the portal out of write protect mode.   No matter what i change to do, i get the message
Write-protect mode is currently active. The editor is now in read-only mode.
this shows up in the log
10/06/10 16:21:21 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
                     Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
deploy: Import aborted - write protect mode is active.

Hi David,
Do the following steps:
       1.       Start the Visual Administrator .
       2.       Choose Global Configuration   u2192Server u2192Services u2192com.sap.portal.pcd.gl .
The properties of the service are displayed:
                            a.      Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
                            b.      Pcd.Pl.WriteProtectCause describes the reason that write-protect mode is activated. This information appears in the log files.
       3.       Deactivate write-protect mode by entering false as the value for Pcd.Pl.WriteProtectActivated .
       4.      C lick Update and then click Save .
A confirmation dialog box opens.
       5.       To apply the changes to all cluster elements, click Yes .
       6.       To reset the default values, click the Reset Default Global Properties icon .
This will deactivate the write protect mode.
Thanks and Regards,
Syam.

Database Open in Read Only Mode

Hi
I would like to open database in read only mode
like
SQL> startup mount
SQL> ALTER DATABASE OPEN READ ONLY
this will open database for read only mode for all user
i want to give read write access on database to one user
any idea how i can proccess
Thanks
Chetan

Hi,
Alter database open read only;
this should work fine and everything will be in read only mode. Hence if any auditing is going on and audit_trial=db then it fails to open the database in read only mode.
If you want to control only users to stop writing to it, you may remove tablespace quotas for those users. Also, you may control them through grants. Remove any current grants assigned to them or to roles through which the grants are assigned.
Several ways to do this. If you tell us the particular scenario then we might help in getting a solution.
Regards,
Vasu.

The MDM repository is in read-only mode

Hi Experts,
In our environment we have a Master ans Slave repository and the synchronization is being scheduled daily.
Now we understand from the MDIS logs of the Master repository that the repository is in Read-Only mode and none of the records can be updated / created.
We have tried restarting the repository too.
Please advice.
Thanks,
Sridhar T A

Chander,
We get Check/Verify Option only after repository is unarchived/created. So, this can not be applied in Maria's case....
Maria,
Please let us know what version of MDM you are using.. Are you sharing database for MDM with other systems too??
Also, can you check MDM logs and provide detailed error message from logs...You can check MDM server logs either from Console or On MDM server log directory...
This information will help..
Please also try this after setting following entry in MDS.INI file:
Unarchive Ignore Language Count=True
Best Regards,
Shiv

VD offline;still the Volume is accessible in read-only mode.

Hi,
In our lab, we have a test server setup with Windows 2012 R2(Build 9600) Standard edition installed.
As part of our test exercise, we need to induce the failure of a RAID 0 drive(internal storage) and carry out the volume/applications recovery.
We induced the drive failure by pulling out a disk drive from a RAID 0 volume. As soon as the drive was pulled out, the LSI storage controller reported the VD offline. The windows disk management did show the uninitialzed/unallocated drive
on rescanning drives.
But the specific volume is still accessible from Windows explorer in read only mode. The applications(sql server database) that are running on the specific volume are also running fine (they are of read-only nature).
We are quite surprised by this behavior. Please advise.
Thanks and Regards,
Jisha

have you attempted a reboot? Pulling a drive may have different behavior than a failed drive.
LSI is a raid controller but if you see both drives it sounds like you may be using a software raid?

ORA-01578 about standby database in read only mode

Hi,
I have an ORA-05178 (data block corrupted) about a standby database which in read-only mode. About production database, there is no problem.
After analyze, this is an index segment :
SELECT segment_name , segment_type , owner , tablespace_name
FROM sys.dba_extents
WHERE file_id = 58
AND 218173 BETWEEN block_id and block_id + blocks -1
SEGMENT_NAME SEGMENT_TYPE OWNER TABLESPACE_NAME
SICINHIS01 INDEX MOWIN IDX_DATA01
There is no constraint.
How can I repair this problem ?
Nicolas

Hi,
I have an ORA-05178 (data block corrupted) about a standby database which in read-only mode. About production database, there is no problem.
After analyze, this is an index segment :
SELECT segment_name , segment_type , owner , tablespace_name
FROM sys.dba_extents
WHERE file_id = 58
AND 218173 BETWEEN block_id and block_id + blocks -1
SEGMENT_NAME SEGMENT_TYPE OWNER TABLESPACE_NAME
SICINHIS01 INDEX MOWIN IDX_DATA01
There is no constraint.
How can I repair this problem ?
Nicolas

Converting the WAD applications into PDF format

Hi SAPians,
I'm in need to convert WAD results into PDF Format using SAP BW 3.5 and Acrobat Reader 7.0. And I've referred some documents in Net, But,they gave ideas only for 3.5 and Acorobat 5 version.
But i've to convert the WAD results into PDF format only by using Acrobat Reader 7.0. So, kindly let me know the steps to do so.
Thanks in Advance.
Jayaprakash J

Hi Shahid syed,
Thanks for your reply.
It was very useful.
But, i've askd the solution for sap bw 3.5 with Acrobat reader 7.0.
So, plz let me knw if any solutions for that to make wad reports into pdf format.
Points will be awarded.
Thanks & Regards
Jayaprakash J

How to display the "display values" in READ Only mode for a SHUTTLE

Hi,
I have a form item of type *'Shuttle'* and using the following LOV.
   select DEPTNAME d, DEPTNO r
    from DEPTIn normal mode..it displays the department name and internally store the Deptno..
Now I converted this item to Read Only mode using Read Only Condition Type
the problem is as soon as it becomes read only...it displays the deptno....not the department name
            Department-   10:20:30How can I display the "display values" i.e the actual department name in read only mode..
            Department-   Department1:Department2:Department3Thanks,
Deepak

Hi,
It seems feature. Shuttle is span tag when it is read only.
Work around could be that
you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
Br, JAri

SQL 2012 AlwaysOn cluster IP not moving after failover, causing database to be read-only

SQL Server Cluster Name: SQLDAG01
SQL Server Cluster IP: 10.0.0.50
Cluster Listener IP: 10.0.0.60
Node 1 Name: SQL01
Node 1 IP: 10.0.0.51
Node 2 Name: SQL02
Node 2 IP: 10.0.0.52
Everything is fine when SQL01 is the primary. When failing over to SQL02, everything looks fine in the dashboard but for some reason the cluster IP, 10.0.0.50, is stuck on node 1. The databases are configured to provide secondary read access. When executing
a query on SQLDAG01, I get an error that the database is in read-only mode. Connectivity tests verify that SQLDAG01, 10.0.0.50, connects to SQL01 even though SQL02 is now the primary.
I've been Googling this for the better part of the day with no luck. Any suggestions? Is there a Powershell command force the cluster IP to move to the active node or something? Also I'm performing the failover as recommended, from Management Studio connected
to the secondary node.

This was the answer, it had been setup to use the cluster name instead of the application name. Whoever installed Sharepoint connected it to SBTSQLDAG01 instead of SHAREPOINT01. Once we changed Sharepoint to connect to SHAREPOINT01, the failover worked as
expected. We did have a secondary issue with the ARP cache and had to install the hotfix from http://support.microsoft.com/kb/2582281 to resolve it. One of the Sharepoint app servers was failing to
ping the SQL node after a failover, the ARP entry was stuck pointing to the previous node. This article actually helped a lot resolving that: http://blog.serverfault.com/2011/05/11/windows-2008-and-broken-arp/
One thing I did notice is that the SQL failover wizard does not move cluster groups "Available Storage" and "Cluster Group", I had to move those through the command line after using the wizard. I'm going to provide the client with a Powershell script that
moves all cluster groups when they need to do a manual failover. This also happens to be why the Sharepoint issue started, "Cluster Group" is what responds to the cluster name SBTSQLDAG01. Moving that group over to the node that has the active SQL cluster
group also made it work properly, but using the application name is the correct method.
Thanks everyone for all your help. Although the nitpicking about terminology really didn't help, that was a pointless argument and we really could have done without it. Yeah I know 2008 called is "Failover Cluster Manager" and MSCS is the "2003 term" but
really, they're basically the same thing and we don't really need to derail the conversation because of it. Also, If you look at the screenshot below you can clearly see "AlwaysOn High Availability" in SQL Management Studio. That's what it's called in SQL,
that's where you do all the work. Trying to tell me it's "not a feature" is wrong, pointless, and asinine, and doesn't get us anywhere.
Sorry it took so long to get back, I was off the project for a couple weeks while they were resolving some SAN issues that caused the failover to happen in the first place.

Which table shows the tablespace in read-only mode or read-write mode.

HI All,
Can someonoe help me out to find which table shows whether the a tablespace is in Read-only mode or Read-write.
Thanks,
naveen

Try this:
select tbl.table_name, tb.tablespace_name, TB.STATUS from dba_tablespaces tb, dba_tables tbl
where TB.TABLESPACE_NAME = tbl.TABLESPACE_NAME and TB.TABLESPACE_NAME = 'YOUR_TABLESPACE_NAME' and tbl.table_name = 'TABLE_NAME'

Essbase Java API - Check if the cube is in read-only mode

Hello,
I use "Essbase Java Api 11.1.2.0" to manage my essbase server.
I made a script based on sample to make a cube in read-only mode and I have an exception when the cube is already in read-only mode.
So is-it possible to check if the cube is in read-only mode with the essbase java api ?
Thanks
Arnaud

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

OBIEE11g: Set user privileges to Open RPD in Read Only mode.

Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.

863866 wrote:
Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.Hi,
I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
refer section,
http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
Thanks
Deva

Convert the oracle10g database into standby ( read only mode)

Similar Messages

Maybe you are looking for