Convert to 128K error 206

Just downloaded 9.1.1.12. The convert to 128K option is still not ready for prime time. I get errors on certain files (mostly AIFFs and WAVs, some mono, and/or with strange VBR settings, if anyone is tracking this). Error -206, error 5002, etc. The iPod even mounts and dismounts itself, causing disconected errors.
No prob syncing without the 128K conversion step on. Other than not being able to fit more on.
I too would like a setting choice tho for at least 256K (most of my stuff is Apple Lossless).
No lyrics in the particular files.

Hi Sarah,
How frustrating! Can you please tell me what the error message is, in full? Are you trying to convert via Adobe Reader, or through the web interface at https://cloud.acrobat.com?
Here is some basic troubleshooting to try first:
Clear the browser cache and try again.
Try a different browser (see System requirements | Acrobat.com for a list of supported browsers).
Make sure that there are no firewall or proxy settings that are limiting your access to the Internet.
If you're converting via Reader, try through the web interface.
Please let us know how that goes. If you're still having trouble, let us know what the error message is, and tell us more about the files you're converting (how large they are, how the PDFs were created, and so on).
Best,
Sara

Similar Messages

Error 206 when trying to download software

i just purchased creative cloud and keep getting error 206 when trying to download the software.

Debriail please see http://forums.adobe.com/message/6255811#6255811 where this has been discussed.

Serial to USB converter with GPS error

I recently created a program to log GPS information from a Garmin GPS18 antenna. The GPS uses a serial port on the docking station of my laptop for communication and USB for power. In order to deploy this application to a field location, I need to use a USB to Serial converter since the laptop itself does not have a serial port. The program runs fine using the dockingstation and it's serial port, however, when trying to use the USB to Serial converter it routinely errors out. The typical error is -1073807523, "VISA Read in GPS18_read.vi". I have also seen an error that read something like "Property node (argument 8) in VISA configure Serial Port (Instr).via - > GPS18_read.vi".
For troubleshooting, I have used "PuTTYtel" and verified that I can read the GPS18 out via the USB to Serial converter, without problems. Serial settings used are 19200 baud, 8 data bits, 1 stop bit, no parity, and no flow control. But, when trying to read using the LabView vi, it throws the previously mentioned errors. Any suggestions would be appreciated!
Solved!
Go to Solution.

Maybe a power issue? How are you connecting the two USB devices to the laptop? A USB device can be high power or low power. If you connect a passive style 'slim' laptop USB hub and connect the two devices to that, you may be power limited on the port.
Also, is the laptop running on battery? Power conservation modes may be trying to shut down your USB port...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

SQL Error: 206-

Hi, I'm executing an infopackage in a datamart and the monitor of that request tell me that there is a "SQL Error: 206-" and "Errors in source system". What could be happening?. This is not the first time we execute this infopackage, but it is the first time we get this error.
Please help me to find out what is happening?
Regards,
Miguel Campos

Hi Miguel,
Kindly go to the Source System and go to ST22 (ABAP Dump) for a more detailed explanation of the Error.
That SQL Error 206 may mean more than 1 error. Could be that the system has experienced DEAD LOCKS, a Shortage Of Disk Space, etc. etc.
--Jkyle

Error 206, cannot search for downloads

I purchased an album in Itunes but when I try to download I get the message 'unable to search for downloads, unknown error 206. I can donwload apps without a problem. I contacted apple but they cannot help me. I switched of my firewall but this did not help. Anyone has a fix?

Both FIND() and SEARCH() should find the "@" in PowerPivot.
I have done it many times.
You probably have one row in your data set that doesn't contain "@". That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
Once you identify the problem row (or rows) you can make a decision about how to deal with it.

Error 206 - downloading

Hi - I continue to get error 206 when trying to download photoshop. What is this error? Thank you.

[ERROR] UWANative - download updates returned statusCode:43, errorCode:206
Some error occurred during download. Try again later.
Try the download later or download the update from Adobe.com.
if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/adobe-cs6-direct-download-links.html
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

TS1424 error -206, ¿Qué hacer?

Al descargar la temporada 2 de revenge en el capitulo de 19.Identity, el archivo tiene un error me envia el error -206,
¿Cómo reportar a apple este tipo de problemas? sin tener que estar comunicandote a la linea de soporte que sóo atienden de lunes a viernes

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Creative Cloud Desktop Update error 206

I'm trying to update my Creative Cloud Desktop, but the following error code keeps popping up - Please connect to internet, then try again.(Error code: 206). Obviously I am connected to the internet, so I'm not sure what I'm doing wrong?

Cb-M for information on how to resolve Error 206 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Failed: QuickTime error -206

Hey, wonderful! A lovely, NUMERIC error message, just like the 1960s !!!
Anyone know why all my compressions fail with QT error -206 ?
Thanks

What type of media are you sending to Compressor? QT movies, Motion projects or Final Cut Pro sequences?
bg

ITunes error 206

i can't download apps on my pc, iTunes return error- 206. Try later. Someone can help me?

I bought SignalScope off iTunes on my PC, and it didn't appear in my Apps. iTunes keeps telling me to check for purchases, at which point I get the same -206 error.
I also bought Lonely Planet German Phrasebook from the App store on my iPhone, it seemed to download ok but the iPhone crashed and reset during installation. I can't download it again or get the thing to work on my phone. Again I end up checking for purchases and getting the -206 error.
Please fix this or tell us how we're going to get the Apps we paid for!

Creative Cloud -error 206

I can't install creative cloud.
When i open the setup(CreativeCloudSet-Up), the programm says that there is no internet connection and error 206.
Sorry for my bad english, i am from germany.

Hi DerMilchShake,
Error 206 occurred during downloading the updates. I would suggest you to update it later or you can Download the updates manually from the below mentioned link.
http://www.adobe.com/downloads/updates.html?promoid=DJHCQ
http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html also help.
Thanks!
Eshant

Although I'm online and connect, the message "Error 206" appers when I download Creative Cloud. What can I do?

Although I'm online and connect, the message "Error 206" appers when I download Creative Cloud. What can I do?

Hello CAROLINA,
Please refer the thread: https://forums.adobe.com/message/6255811#6255811#6255811 where similar issue has been discussed.
Regards,
Ratandeep Arora

Disk Utility error -206

I am building a restorable image of 10.4.9 - or rather, trying to build an image, as I just ran into error -206 for the 2nd time.
I add stuff to my source in logical groups, then make and test an image. The error occurs at the end of a block restore, when Disk Utility is comparing checksums (running in dutch, so this may not be the wording in english). There is no error message, aside from the number. The target volume is unmountable after this. File restore is OK, except for the odd invisible file turning visible. Block restore appears fine when I skip the checksum comparison.
The 1st time it happened I made my 'install portions' smaller, and found that the error occurred after adding iTunes 7.1.1 to the image. However, now that it happened again with some 3rd party software I am really puzzled.
My work volume runs 10.4.4, the source partition is on the internal drive, and my test partition is on a Lacie Porsche drive.
So what's this error -206??
Imac G5 Mac OS X (10.4.4)
Imacs G3 & G5 Mac OS X (10.4.4)

Cornelius,
Both of your links seem to apply to OS 9.
Yet, there may be something here, as they both indicate a problem with 'sound'; the msg itself claims a corrupt snd resource, and the app "Error codes" says it's a Sound Manager error.
So I went looking in iTunes.
In its Resources folder there's "Complete.aif".
When I doubleclick this, it shows up in iTunes as "sappy.snd".
Now I am really puzzled.
FWIW: DiskWarrior 3 had a problem with the same aif file when Quicktime was updated to 7.0.x (forgot which one).
I will see what happens when I remove this aif file, then post back.
Another open point; I found I could block-restore an image with iTunes 7.1.1 if I checked 'skip checksum' in Disk Utility. The man page for asr calls this 'dangerous' but doesn't specify the dangers. Would you know anything about this?
About my setup: I do not update my working volume. Instead, I start from scratch on a spare partition, then migrate when this turns out OK. I make and test images while building.
Thanks (again) for your help.
Imacs G3 & G5 Mac OS X (10.4.4)
Imacs G3 & G5 Mac OS X (10.4.4)

Acrobat 8.1.2 right-click web page, convert to pdf error

I can't convert web pages to pdf using IE 7 and Adobe 8.1.2.
Vista, IE 7, Adobe CS3, Acrobat 8.1.2 gives the following error converting any web page:
"Acrobat had an error converting to pdf."
Help?

[Html to PDF problem / IE 7 and Acrobat 8x convert webpage to pdf]
What is the deal? does anyone from tech support know about this issue?
Not only that, i also have the CS3 Web Premium package and when i go to unistall components--Acrobat doesn't even show up. Not in Programs/Features for unistall under Vista--what gives?
i also run Revo Uninstaller and it doesn't see it either. i found on NemesisV Blog a 3-4pg manual unistall that takes me deep into the registry, i can't believe it--i'm so pissed.
Steve

Convert to PDF error

I bought convert PDF a few weeks ago and about 90% of the time I try to convert a PDF, no matter what the file is, an error message comes up and it does not covert for me. What is the problem here?

Hi Sarah,
How frustrating! Can you please tell me what the error message is, in full? Are you trying to convert via Adobe Reader, or through the web interface at https://cloud.acrobat.com?
Here is some basic troubleshooting to try first:
Clear the browser cache and try again.
Try a different browser (see System requirements | Acrobat.com for a list of supported browsers).
Make sure that there are no firewall or proxy settings that are limiting your access to the Internet.
If you're converting via Reader, try through the web interface.
Please let us know how that goes. If you're still having trouble, let us know what the error message is, and tell us more about the files you're converting (how large they are, how the PDFs were created, and so on).
Best,
Sara

Convert to 128K error 206

Similar Messages

Maybe you are looking for