Convert to black and white and then restore some of the colour (colorize

Is it possible in Aperture to have a colour picture, reverse in black and white and from that picture restore some colors back, like ColorSplash on the iPhone.
I know how to do it in Photoshop, but I thought is there an external editor in Aperture whom can do that?

this pops up frequently here ...
easy answer, use the dodge and burn plug-in to selectively desaturate the image ...

Similar Messages

MBP Screen goes black and then restores. NVIDIA graphics card issue?

I've got a mid-2007 MBP, 2.4 GHz, 4 GB RAM, running 10.6.2.
Over the past couple of days I am having random losses of video screen. I will be on a webpage, doing nothing with it, and the screen will go momentarily black. It normally lasts for a few seconds, then restores. Nothing I do seems to affect the blacking out or the restoration.
I have the NVIDIA GeForce 8600M GT graphics card.
Any suggestions / input on whether I am experiencing the failure? FWIW, computer is still under Applecare.
Thanks

See this KB article:
http://support.apple.com/kb/TS2377
I have similar issues with my MBP. However there is also a widespread issue on the forums in which the trackpad and keyboard stops responding, and it may be difficult to tell if the problem is loss of video or loss of input ability when the display goes to sleep automatically. I'm currently in this boat. I'm not quite sure if I have a video problem of if this is the issue with the trackpad/keyboard connection.
The video card issue appears that apple will pay for out of warranty but they are not addressing the widespread problem with trackpad and keyboard loss of function and if you are out of warranty you are out of luck.
Message was edited by: Bryan Brindeiro

Can i back up two seperate devices to itunes? and then restore both to the correct new phones?

Looking to back up two iphone 4s, then restore both tomorrow to the two new iphone 5s, can i do two devices as how will itunes know to differentiate between the two?

First off, they all need to be registered to the same AppleID. Same one you should log into when you start up iTunes. When you back up in there, preferably storing locally on the computer and not the iCloud, each device creates its own backup file (only one, by default, but that can be changed). Look in iTunes / Preferences / Devices (hover the cursor over each entry for more info).
So yes, you can back up more than one device onto an iTunes setup. When you plug the brand new iPhone for the first time, iTunes will recognize the fact and offer to Restore from a backup, giving you a list to pick from. Which leads us to an issue: you can only restore from a single backup, iTunes has no means of merging two backups into one.
Even if you manually force a Restore, the phone will be wiped before the backup is applied. Hence, no merging occurs.
Edit: If you want to keep more than a single backup of a phone in iTune's backup library, right-click (or control-click) on any backup in Preferences / Devices. Choose Archive from the popup menu and name the result appropriately. Next time you back up that device, a new file will be created, with the default name.

Scanning documents and then changing some of the sentences?

Scanning a document and changing 2 sentences?So I then can
use it for myself.

Hi,
If you are looking to use Adobe Acrobat you should take a
look at the Acrobat forums here:
http://www.adobeforums.com/webx/.ee6b2f2/
This forum is for Acrobat.com.
It might also help to take a look in the user guide for
Acrobat, in particular the sections on paper capture and the
touch-up text tool.

Why does a movie or TV show stop during play and then takes you to the main ATV icon screen?

This weekend while watching a movie it stopped and went directly to the main ATV screen? Also while watching TV shows I witnessed the same issue about halfway through each. Also, when returning to the movie or TV show it acts like the first time viewing and does not give you the option to resume playing.

Same issue, just cuts out to black and then goes back to the home screen. Happened about 4 times while watching one TV show. I'm using Software version 6.0 (6646.65)

PSE Elements 9-convert to black and white not working.

I recently bought my wife a new HP computer with Windows 7 64bit and Photoshop Elements 9 to go with it. She has not had any problems up until today.. It seems when she attempts to convert a picture into black and white, photoshop freezes up. Sometimes it will convert the image but most of the time when you go to Enhance--convert to black and white, the little photo of what you want to conver that is on the right hand side of the screen just fills up with dots and then nothing appears on the work area.At that point you cannot close the application or anything else with out Ctrl.alt,delete. I have tried to change the programs compatibility to Windows Xp service pack 2 and 3 as well as running as admin but it does not fix this problem. As far as I know this only occurs when she tries to convert photos to black and white. What can we do? Is PSE9 not compatible with Windows 7 64?

Suggest that you delete preferences:
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

How to convert a black and white tif image to colour

I want to convert a black and white tif image to colour. I opened it in Photoshop, changed the mode to RGB colour/8, saved it as psd, but when I use the Replace Colour dialogue box, I just get my colour showing as grey-scale. What’s the correct way to proceed?
Thank you

What’s the correct way to proceed?
Joke?
In Photoshop there are often more ways than one to achieve a task and none of them need be considered »wrong« as long as the result fits the intention, so »the correct way« seems to be problematic terminology.
Anyway, one can use a Layer set to Blend Mode Color and paint on that with whatever colors.
Or one can use Solid Color Layers set to Blend Mode Color.
Or Hue/Saturation Layers …
To edit contrast if necessary Curves or Levels Adjustment Layers can be employed.
You could also have googled »photoshop colorize black and white« …

Enhance - Convert to Black and White menu Option 'issue'...?

Just an observation, more like an infuriating 'niggle'...
When I use the 'Convert to Black and White' menu option in Photoshop Elements 10, it does a good job, but it still leaves the file in RGB format (Colour)??
I am working for a Publishers, and I keep forgetting to convert the file to Grayscale after running the Wizard.
Wouldn't it have been easier to add this as an option at the end, and have they done this in Photoshop Elements 11 (or later...)??
It seems to me to be something that you'd expect the package to do...???
Lee Cooke

No, this option isn't part of convert to black and white anywhere, since it's not something you normally want to do because it greatly limits what else you can do to your photo (many tools and commands are only available for RGB photos). I realize that in your particular situation it's an annoyance, but although I think adobe makes a lot of goofy decisions, I can see why they chose not to do that here.

HT1430 My brand new iPhone 4 is quitting apps unexpectedly, turning into a black screen and then restoring to home page. Restarting didn't correct problem. Shall I follow full resetting instructions?

My brand new iPhone 4 is quitting apps unexpectedly, turning into a black screen and then restoring to home page. Restarting procedures didn't correct problem. Shall I follow full resetting instructions?

Thanks for the straightforwardness roaminggnome - I wasn't sure if this problem qualified as deseving a reset. Unfortunately, for some reason I can't explain, your response remained undisclosed to me for a while, the next reply after yours took preference and I ended up doing as Meg St.Clair's susgested and initiated download, installation and syncing of Smartsync which is now taking ages to finish... If problem persists shall do the resetting and restoring.

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

STARTUP ON MY NOTEBOOK WANTS TO GO TO REPAIR AND THEN RESTORE

Lately my HP Pavilion g7 notebook PC A7A44UA#ABA goes to a white screen when I turn it on. Then it wants to repair and then restore. I have turned it off and restarted a couple of times to try to start it normally.It does start but there are lines at the bottom of the screen.
How do I resolve this issue. Other than the startup problem it is working fine.

restart the ipad
http://support.apple.com/kb/HT4057

Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

I didn't know that it was posted three times. My computer didn't say that it posted anything.
My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

Firefox freezes the computer for about 20-30 seconds (not even Alt+Tab works), the screen blinks black and then it shows the desired page. Does that several times at the beginning, then sort of stabilizes.

Firefox freezes the computer for about 20-30 seconds (not even Alt+Tab works), the screen blinks black and then it shows the desired page. Does that several times at the beginning, then sort of stabilizes.
This happens even if I simply hover the mouse over bookmarks, not even opening a page.
And waiting for this to happen some times or closing and re-opening seems to make it work ok again.
I've already disabled almost all add-ons (I'm using only one for Flash and NoScript right now), reinstalled Firefox (8.0.1), restoring only the bookmarks from an older version.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I can't get my computer to boot up. The screen is white with a file folder and then at ? in the middle

The screen is white with a file folder and then at ? in the middle

Before declaring that the disk is dead (which is a common cause for what you are seeing), try the steps outlined in this article:
http://support.apple.com/kb/TS2570
This article also has some troubleshooting steps you can try:
http://support.apple.com/kb/ts1417
If you don't have your original system disks, you can boot into single user mode folloing these instructions:
http://support.apple.com/kb/ht1492
and then following the directions for running the fsck command in the second article I list above.
I would try these things before giving up and assuming that the disk is dead. The flashing question mark indicates that a valid boot disk cannot be found. One cause for this is that the disk has experienced hardware failure. However another cause could be that the system and boot files on that disk are somehow damaged (perhaps from a power surge or an improper shutdown of the computer) and in some cases the above repair steps can restore them to working condition.

Accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

Check out this Apple article -> iOS: Unable to update or restore
Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone?

Convert to black and white and then restore some of the colour (colorize

Similar Messages

Maybe you are looking for