Convert to DNG doesn't work in Bridge with 5D mark III

I'm using CS6 and the 'Convert to DNG" option doesn't work when I download my Canon 5D Mark III files, but it works with my 5D Mark II files. HOW can I get this to work. I've had to convert using the DNG converter.

Update ACR to 8.7.1 and you won't have to convert to DNG at all. the 8.7.1 DNG converter also supports the Mark 3.

Similar Messages

Lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

I'm using CS 6 and lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

Let's see if I can simplify it for you...are you using CS6 (yes, it seems), are you having ACR problems (yess it seems). So, do you want to fix your issues? Then read this (pay close attention to the details)...
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
It pretty much says you need to download a different version of ACR and install it (if it's not too diffucult for you to understand) to get ACR & Bridge to work properly...or not. Your choice...

I can't get Dr Browns Image Processor Pro to work from Bridge with Photoshop CC 2014

We use the wonderful DR Browns Image Processor Pro script a lot, but cannot get it to work from Bridge with PS CC 2014. When I select files in Bridge CC and then go to Tools> Dr Browns Services 2.3.1 > Image Processor Pro it just pops up an error message that says ReferenceError: photoshop is undefined.
The actual script works fine if I launch it from Photoshop CC 2014 - just not if I load it from Bridge CC.
I have unistalled it and re installed a few times, both manually and through the Extension Manager CC.
I am using a Win 7 64bit computer.
I assume there is some change in the scripting part that loads Photoshop from bridge but not sure. It worked fine in CC. Just not CC 2014.
I opened the Dr Browns Services .jsx file but don't see anything obvious. This is the section related to the Image Processor Pro part:
// This routine takes an array of files. If called by Photoshop,
// it will invoke Dr. Brown's Process 1-2-3 with the files. If called by
// any other app, it will send a BridgeTalk message to Photoshop
// to invoke this routine with the same arguments.
drbrownserv.process123 = function (files) {
// Bring Photoshop to the foreground.
BridgeTalk.bringToFront ("photoshop");
// Create a new BridgeTalk message for Photoshop to invoke
// Image Processor with the selected files
var btMessage = new BridgeTalk;
btMessage.target = "photoshop";
btMessage.body = "drbrownserv.process123 (" + files.toSource () + ");";
btMessage.send ();
} else {
photoshop.runActionCommand ('611736f0-9c46-11e0-aa82-0800200c9a66', files);
catch (error) {
if (error.number != 8007) // Don't report user cancelled errors.
drbrownserv.alert (error);

I copied that .jsx file to a new name "Xbytor Image Processor Pro.jsx" edit that file changed the string Dr Browns services to "Xbytor Image Processor Pro" then commented out all the code that added tools menu items but "Image Processor Pro" and I put that file into
"C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CC\Adobe Bridge" even though Bridge CC is 64Bit seems to use theat location.
Bridge CC was updated by the creative clouds update and opens Photoshop CC 2014 now

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

Forum and support for Boot Camp:
http://www.apple.com/support/bootcamp

Ralink rt61 doesn't work on battery with 2.6.36.2

Hi folks.
I recently reinstalled Arch on a Packard Bell MZ36 which has a Ralink rt61 wireless card. I'm using latest stock kernel from [core]. When I disconnect AC power and go to battery, I got a kernel message, and wifi doesn't work anymore. If I connect again AC power, it doesn't work. If I boot in battery, it doesn't work neither. Before reinstalling Arch, this machine had 2.6.35 on it, and it worked just fine. Does anyone know how to solve this issue?
Some outputs:
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
09:04.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
dmesg | grep rt61pci:
vale@Charlie:~$ dmesg | grep rt61pci
rt61pci 0000:09:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
error:
Dec 19 13:53:15 Charlie kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Dec 19 13:53:15 Charlie kernel: IP: [<f8c4cc14>] rt61pci_config+0x14/0x280 [rt61pci]
Dec 19 13:53:15 Charlie kernel: *pde = 00000000
Dec 19 13:53:15 Charlie kernel: Oops: 0000 [#1] PREEMPT SMP
Dec 19 13:53:15 Charlie kernel: last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT1/type
Dec 19 13:53:15 Charlie kernel: Modules linked in: ipv6 ext2 radeon arc4 ecb rt61pci crc_itu_t snd_hda_codec_realtek rt2x00pci snd_seq_dummy rt2x00lib led_class snd_seq_oss ttm ma$
Dec 19 13:53:15 Charlie kernel:
Dec 19 13:53:15 Charlie kernel: Pid: 2659, comm: irq/22-0000:09: Not tainted 2.6.36-ARCH #1 EasyNote MZ36/EasyNote MZ36
Dec 19 13:53:15 Charlie kernel: EIP: 0060:[<f8c4cc14>] EFLAGS: 00010292 CPU: 0
Dec 19 13:53:15 Charlie kernel: EIP is at rt61pci_config+0x14/0x280 [rt61pci]
Dec 19 13:53:15 Charlie kernel: EAX: 00000000 EBX: f7380ba0 ECX: 00000010 EDX: f61b5f54
Dec 19 13:53:15 Charlie kernel: ESI: f61b5f54 EDI: 00000010 EBP: f61b5f14 ESP: f61b5eec
Dec 19 13:53:15 Charlie kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Dec 19 13:53:15 Charlie kernel: Process irq/22-0000:09: (pid: 2659, ti=f61b4000 task=f68e4cf0 task.ti=f61b4000)
Dec 19 13:53:15 Charlie kernel: Stack:
Dec 19 13:53:15 Charlie kernel: f6ab14a0 01996089 f630d6d8 f630d6c0 00000002 0ac142b0 f7380ba0 f61b5f30
Dec 19 13:53:15 Charlie kernel: <0> f6ab14a0 f61b5f54 f61b5f80 f8c4cf04 00000300 00010011 00000001 f7380ba0
Dec 19 13:53:15 Charlie kernel: <0> 00000100 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Dec 19 13:53:15 Charlie kernel: Call Trace:
Dec 19 13:53:15 Charlie kernel: [<f8c4cf04>] ? rt61pci_interrupt_thread+0x84/0x1c8 [rt61pci]
Dec 19 13:53:15 Charlie kernel: [<c1098280>] ? irq_thread+0x100/0x200
Dec 19 13:53:15 Charlie kernel: [<c1098180>] ? irq_thread+0x0/0x200
Dec 19 13:53:15 Charlie kernel: [<c1060764>] ? kthread+0x74/0x80
Dec 19 13:53:15 Charlie kernel: [<c10606f0>] ? kthread+0x0/0x80
Dec 19 13:53:15 Charlie kernel: [<c1003d3e>] ? kernel_thread_helper+0x6/0x18
Dec 19 13:53:15 Charlie kernel: Code: 01 00 00 e9 57 ff ff ff eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 57 89 cf 56 89 d6 53 89 c3 83 ec 1c 8b 02 8b 40 18 <8b> 00 85 c$
Dec 19 13:53:15 Charlie kernel: EIP: [<f8c4cc14>] rt61pci_config+0x14/0x280 [rt61pci] SS:ESP 0068:f61b5eec
Dec 19 13:53:15 Charlie kernel: CR2: 0000000000000000
Dec 19 13:53:15 Charlie kernel: ---[ end trace a5962a1ab0d7fe87 ]---
Dec 19 13:53:15 Charlie kernel: exiting task "irq/22-0000:09:" (2659) is an active IRQ thread (irq 22)
Dec 19 13:53:17 Charlie kernel: No probe response from AP 00:4f:74:31:75:b0 after 500ms, disconnecting.
Dec 19 13:53:17 Charlie kernel: cfg80211: Calling CRDA to update world regulatory domain

same problem here. Screen turns black and says nearly the same as soon as AC power is off. Other distribution work with no problem (Linux Mint, Dream Linux Live-CD).
I'm running 32bit 2.6.37-ARCH, same problem occurs with 64bit kernel
05:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
any idea?

Cisco AP 700w as a Work Group Bridge with a WLAN Controller

I am trying to setup an AP 700w as a Work Group Bridge as it would be interesting to have this running, because it has the built-in 4 port switch.
I have WiSM based WLCs running the version 7.0.240.0. I converted a 700w to an autonomous AP and on the AP I installed the IOS Version 15.3(3)JA1.
When I use an autonmous based AP to connect the 700w as a WGB everything works fine. I can connect clients through the 4 port switch.
If I try to use a Controller based WLAN environment it does not work. The config is simple:
ap#sh run
Building configuration...
Current configuration : 1805 bytes
! Last configuration change at 18:37:11 UTC Thu Mar 5 2015
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
logging rate-limit console 9
enable secret 5 $1$b5Da$QTI6Geq7ARZud34ZqA45.0
no aaa new-model
led display off
no ip source-route
no ip cef
dot11 syslog
dot11 ssid LAGERWPA
   authentication open
   authentication key-management wpa
   wpa-psk ascii 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
username CISCO password 7 14341B180F0B
bridge irb
interface Dot11Radio0
no ip address
encryption mode ciphers aes-ccm tkip
ssid LAGERWPA
antenna gain 0
packet retries 64 drop-packet
station-role workgroup-bridge
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
shutdown
antenna gain 0
peakdetect
no dfs band block
packet retries 64 drop-packet
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
mac-address 18e7.2801.9610
ip address dhcp client-id GigabitEthernet0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
lan-port port-id 1
no shutdown
lan-port port-id 2
shutdown
lan-port port-id 3
shutdown
lan-port port-id 4
shutdown
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
The association is OK, it is seen as a WGB, I can reach resources on our network from the AP, ping works, I can use a telnet from client to access the AP 700w etc.:

20... Here is an old post for reference.
https://supportforums.cisco.com/thread/2119996
Sent from Cisco Technical Support iPhone App

It doesn�t work lazy loading with remote client (toplink)

I am trying to use lazy loading in a @ManyToOne field but I get an exception. I have been reading in some oracle tutorials that it's necesary use -javaagent:.../lib/toplink-essentials-agent.jar for that it works because this argument activate dynamic weaving in JavaSE. I have put this command line argument javaagent but it doesn't work. Why? Can I have to do another thing? I have done a lot of tests in base to comments read in another forums but I only obtains an exception.
Caused by: java.io.IOException: Mismatched serialization UIDs
NOTE: The server use toplink and the remote client query the entitties through a session bean of the server. Besides, I am using Glassfish (Sun application server and toplink).
Thanks in advance.
hayken

At first, thank you for your reply.
I know that I haven´t explained the problem too well. I have a stateless bean with one remote method that execute a query an returns an entity like this
@Entity
public class ModuloEntity extends Serializable
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Long idModulo;
private String nombre;
@ManyToOne(fetch=FetchType.LAZY)
@JoinColumn(name="IdProyecto")
private ProyectoEntity proyecto;
The remote client invoke this method and in that moment I get this exception.
21-may-2007 18:55:48 com.sun.corba.ee.impl.encoding.CDRInputStream_1_0 read_value
ADVERTENCIA: "IOP00810211: (MARSHAL) Exception from readValue on ValueHandler in CDRInputStream"
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 211 completed: Maybe
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.valuehandlerReadException(ORBUtilSystemException.java:7053)
Caused by: java.io.IOException: Mismatched serialization UIDs : Source (Rep. IDRMI:com.syskonic.gesplan.entities.ModuloEntity:6D06A8C14D488FFF:8E6FC8687EA9E512) = 8E6FC8687EA9E512 whereas Target (Rep. ID RMI:com.syskonic.gesplan.entities.ModuloEntity:1C6925798CDFD3DF:3455DBF4457AE337) = 3455DBF4457AE337
at com.sun.corba.ee.impl.util.RepositoryId.useFullValueDescription(RepositoryId.java:573)
If I look the server log, I can see that the call has not been produced, it doesn´t show any exception. It looks that the object managed by the server and the remote client aren´t the same and the corba service doesn´t work when remote client call session method. If I change the ModuloEntity and remove the fetch attribute then all this process executes correctly. The problem is in this attribute.
NOTE: I am using the javaagent command line argument.
Hayken

StageWebView Doesn't work on Android with Captive Runtme...

If I make an apk with the default setup (requires separate runtime download) it works, but not with captive runtime. I need captive runtime so that it can be accepted into Amazon Appstore.
StageWebView.isSupported appears to return true when run, and then it just doesn't work.
Is there any way around this? Will this work in the future?
I am probably just going to work around it and do without it for this release, but would like to see if anyone knows what the deal is with it and let folks know of the issue.
Edit: I have found that any usage of a StageWebView object not only doesn't work, but makes errors and breaks other parts of the app, so I have had to disable any usage of it...

I'm also using StageWebView, but I don't have the problems you mention. I am using Captive Runtime to compile my app and it's working fine in the Android Market (I haven't tried Amazon Appstore, though).
The version of AIR i'm using is 3.1. Are you using this version?

Work group bridge with cisco 3500

Hi,
We have few cisco 3500 ap's which is to be used as work group bridge. I am not very sure but i think we need the ap to be in autonomous mode to make it a work group bridge. Currently it is running lwapp/capwap image.
Is this correct, please help with suggestions.

sh ip int brie
Interface                  IP-Address      OK? Method Status                Prot
ocol
BVI1                       10.82.6.247     YES DHCP   up                    up
Dot11Radio0                unassigned      NO unset up                    up
Dot11Radio1                unassigned      NO unset up                    up
GigabitEthernet0           192.168.1.2     YES manual up                    up
AP-OF#sh ver
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 12.4(23c)JA7, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 29-Jan-13 05:19 by prod_rel_team
ROM: Bootstrap program is C3500 boot loader
BOOTLDR: C3500 Boot Loader (AP3G1-BOOT-M), Version 12.4 [mpleso-ap_jmr3_esc_0514
116]
AP_OF uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g1-k9w8-mx.124-23c.JA7/ap3g1-k9w8-xx.124-23c.JA7
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3502E-S-K9    (PowerPC460exr) processor (revision B0) with 81910K/4
9152K bytes of memory.
Processor board ID FGL1721S5G0
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
LWAPP image version 7.0.240.0
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: BC:16:65:77:D9:93
Part Number                          : 73-12175-06
PCA Assembly Number                  : 800-32268-06
PCA Revision Number                  : B0
PCB Serial Number                    : FOC171622Y6
Top Assembly Part Number             : 800-32904-02
Top Assembly Serial Number           : FGL1721S5G0
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP3502E-S-K9
Configuration register is 0xF
sh run | i def
aaa authentication login default local
ip default-gateway 192.168.1.55

ArrayDeque as a stack doesn't work as expected with complex objects

Trying to use ArrayDeque as a strorage for complex values <PSList<PSol>> (i.e. Arraylists of structured Values PSol), this doesn't work as expected. The code below should produce different values of pSLWk, being stored on bkStack, which are then to be retrieved by pop() to the variables pSL1, pSL2, pSL3.
However, retrieval only ends up with three identical data sets (variables) pS1,pS2, pS3.
        public PSList<PSol> pSL;
        private ArrayDeque<PSList<PSol>> bkStack=new ArrayDeque<PSList<PSol>>();
        pSLWk=new PSList<PSol>();       // Constructor copies some Array (static field) to the PSLists
        pSL=new PSList<PSol>();
        pSLAux=new PSList<PSol>(pSLWk);   // Constructor copies from existing PSList
        pSLWk.checkResult("pSLWk prior to setDefaults - modifies pSLWk !");
        setDefaults();                                                            // Modifies pSLWk only
        pSLWk.checkResult(" pSLWk after setDefaults");              // .. got changes (o.k.)
        pSL.checkResult(" pSL after setDefaults");                  // .. unchanged (o.k.)
        pSL.checkResult(" pSLAux after setDefaults");               // .. unchanged (o.k.)
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSLWk.getEl(77).setVal(new StringBuffer("4"));              // change pSLWk again (value 4 @ 77)
        pSLWk.checkResult("pSLWk, after PUSH, THEN modify 4@77");   // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 77");
        bkStack.push(pSLWk);                      // store changes in bkStack
        pSLWk.getEl(80).setVal(new StringBuffer("8"));              // change pSLWk again (value 8 @ 80)
        pSLWk.checkResult("pSLWk after setVal 8@80");               // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 80");
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSL1=new PSList<PSol>(bkStack.pop());
        pSL1.checkResult("pSL1 after 1st pop");
//      pSL1=bkStack.pop()                                          // Straightforward way doesn't work either...
        pSL2=new PSList<PSol>(bkStack.pop());
        pSL2.checkResult("pSL2 after 2nd pop");
        pSL3=new PSList<PSol>(bkStack.pop());
        pSL3.checkResult("pSL3 after 3rd pSLWk=..pop()");Here the result from the code above:
debug:
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()What's the problem with this ?
Rem: I tried the simple approach as well:
bkstack.push(pSLWk);
...

Thank you for your comments, although I see we still don't have a common understanding of the problem.
Firstly, I add the code for the PSList and the PSol classes, so you might find some problem with that:
     public class PSol     {
          private StringBuffer val;
          private int zI;
          private int sI;
          private int bI;
                    // == Konstruktor
          public PSol( StringBuffer v, int z, int s, int b )     {
               this.val=v;
               this.zI=z;
               this.sI=s;
               this.bI=b;
                    // == Getter,Setter
          public StringBuffer getVal()     {return val;}
          public int getZ()     {return zI;}
          public int getS()     {return sI;}
          public int getB()     {return bI;}
          public int getVSize()     {return val.length();}
          public void setVal(StringBuffer v)     {val=v;}
          public boolean hasVChar( StringBuffer ch, boolean delCh )     {
               boolean bT=false;
               StringBuffer fSt=getVal();
               if (!(fSt.indexOf( ch.toString() )     == -1))     {
                    bT=true;
                    if (delCh)     {
                         setVal(fSt.deleteCharAt(fSt.indexOf( ch.toString() )));
               return bT;
     }     // PSol
     public class PSList<E> extends ArrayList<PSol>     {
               /**     Construktor 1: PSList(v,z,s,b) - makes list from single arrays
          private static final long serialVersionUID = 4711L;                         // ### JAVAC Warning! ###
        public PSList (String[] vS, int[] z, int[] s, int[] b) {
               StringBuffer[] v=new StringBuffer[valDim];
            for (int i=0;i<valDim;i++) {
                v=new StringBuffer(vS[i]);
//ArrayList<PSol> pSL=new ArrayList<PSol>;
               for (int i=0; i<valDim; i++) {
                    this.add( new PSol( v[i], z[i], s[i], b[i] ) );
/** Konstruktor2 : makes list from matrix array
public PSList () {
for (int j=0; j<nDim; j++) {
for (int i=0; i<nDim; i++) {
this.add( new PSol( new StringBuffer(sGuiArr[i][j]), i, j , i/locDim + (j/locDim)*locDim) );
                    /**     ------- Construktor 3 : PSList(PSList pS) - makes list as a copy of an existing one
public PSList ( PSList<PSol> pX )     {
               super (pX); // ArrayList-Constructor (Collection)
// get Element <PSol>
public PSol getEl ( int i )     {return get(i);}
     public int getCount()     {return size();}
     public int getTValLg()     {
               int lg=0;
               for (int i=0; i<getCount(); i++)     {
                    lg=lg + getEl(i).getVal().length();
               return lg;
                    /**     ------- checkResult()     -     Check if alll elements are single char +dump
     public boolean checkResult(String messg)     {
               boolean allOne=true;
               for (int i=0; i<size(); i++)     {
                    if ( getEl(i).getVal().length() > 1 )     {
                         allOne=false;
                         System.out.print(" ");
               else     {
                    System.out.print(getEl(i).getVal());
               System.out.println("<C.R.>"+messg);
               return allOne;
     }     // Class PSList
Secondly, I don't really see what you mean by pointing out to 'only one "pSLWk" instance of PSList'. The variable pSLWk is the variable to be worked upon; after some change of the contents, I want to save this state of contents to the stack. When I pop that variable from the stack, I wouldn't want to restore it to pSLWK, but to some other variable, e.g. by public PSList<PSol> pSL1;
pSL1=new PSList<PSol>(bkStack.pop());Again - to my understanding (which comes from old days of microprocessor coding... - there shouldn't be a need to know how the data came there, or what was the name of the variable who stored it there. And : the implementation of ArrayDeque returns 'elements' of class E, not references !
Thirdly, you're right, that the method of using a copy constructor for retrieval looks 'weird'. However - I had some other versions that didn't work either, e.g. the straightforward one, as I pointed out.
And fourthly: yes, I'm almost sure that I'm messing up something somewhere. I went to this forum hoping to clarify that ... :)
If you don't mind, could you please sketch a few lines of code, how to 'push' a complex variable to a ArrayDeque stack, and retrieve it - by 'pop()' - to some to other variable of the same class later ?
Might make our discussion much easier, to see how things REALLY work.
Thank you !

Wifi doesn't work hands fare with Toyota car sterio or Bose speaker. What is wrong with the wifi on the 4S? Does apple have a fix?

iPhone 4s doesn't work? Help

Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily.

Smart zoom doesn't work in Safari with Mavericks

After update Mountain Lion to Mavericks, smart zoom in Safari doesn't work for me. Same case with swipe pages. Am i the only one?. Thanks.

Check your Mouse and/or Trackpad settings in System Preferences. The upgrade may have disabled the Smart Zoom and Swipe gestures.
Some users (myself included) are finding that re-enabling them doesn't work, though.

Cannot open Camera Raw in Bridge with 5D Mark II files

Just bought a Canon 5D Mark II and Adobe Photoshop CS4 - no experience with Adobe so far. Neither Photoshop nor Bridge opened raw files initially.
After copying Camera Raw 5.3 manually into the (Windows) Photoshop "File format" I can now open RAW files in Photoshop (the automatic Adobe update program reported errors at installation and did not work) but NOT in Bridge. Maybe the 5.3 plug-in needs to be placed elsewhere - anyhelp on that for windows application would be great.
When opening my raw files in Bridge, the automatic DNG conversion did also not work.
My issue is that I don't know how to see and work on raw images in Bridge with the Bridge command "File/open in camera raw" also not working. I was reading about the same issue in another forums and also in this space but after hours of trial and error and testing all the published wisdom I got stuck now. I am very keen to learn from the experts. Thanks in advance for support.

Hello, and welcome to the forum, Ludwig.
It seems that you missed both the readme ( http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_5.3_ReadMe.pdf ), or the detailed instructions on the bottom on the very page where you downloaded the update: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4365
The correct location is: Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats . You will need to remove the other copy from the Photoshop tree.
Please post this information on the other forums where you also saw unresponded questions on the same topic, so that you can help others!

External keyboard only works after reboot with Port Replicator III Plus

The problem is that when I boot the notebook, the external PS/2 keyboard doesn't work. When I reboot the keyboard flips on and then I can use it.
This problem occurs on a Toshiba Tecra notebook with a Advanced Port Replicator III Plus. I've used several keyboards, so that isn't the problem. I've changed a value in the bios which is used for USB devices (mouse/keyboard). I disabled the option, because I use a PS/2 mouse and keyboard, but the problem isn't solved. I hope someone has an answer to this problem.

Hello
I presume that there is something wrong with docking procedure and touchpad. Try to disable the Touchpad while the Notebook is docked.
Try also to install mobile extensions again.

E2500 Web Interface doesn't work in bridge mode

I recently bought a Cisco E2500 for work, and after setting the router to Bridge Mode, I am unable to access the router web interface. I tried both the old IP address (192.168.1.1) and the IP address that I entered when I was configuring Bridge mode, but I couldn't get either to work. I have always tried resetting the switch to factory defaults and trying again to make sure I didn't type anything wrong, but to no avail. The wireless and everything works as it should, I just can't get back into the router to change any of my settings. Any suggestions?

OK, it's working now for me : you must put a static address on your bridge that is on the same range of your Internet network. I also update the firmware to 1.0.03 after a factory reset (just in case...).
here's my Working Config:
- Linksys WBR router (for Internet access) with LAN address 10.100.2.1 (DHCP enable from 10.100.2.100 to 10.100.2.199).
- E2500 Router in BRIDGE Mode with Static address 10.100.2.201, gateway 10.100.2.1 (My WBR router). I configured the WiFi settings and the Guest WiFi settings and everything works fine !
- My laptop are obtaining IP address from my WBR router in the range 10.100.2.x and I can access the Web Interface of the E2500 at address 10.100.2.201 if a have to change config.
Hope this help !

Convert to DNG doesn't work in Bridge with 5D mark III

Similar Messages

Maybe you are looking for