Convert to Labview 6
Hello everybody,
I have made a Vi wich couls read measurements and quality faktor from a electronic box.
Can anyone convert this Vi to Labview 6 pleasse.
see attached zip file
Thanks a lot.
Attachments:
Messbox.zip 3934 KB
Thank you very much,
really i never seen anyone who knows like you in labview. everytime when i post you have the answer.
here is the new vi with lbb like you said to do.
best regards
Attachments:
messbox.zip 3006 KB
Similar Messages
-
Need to convert to labview 11 from labview 12
hello
I need to convert the following Labview 12 VIs to Labview 11.
thank you in advance
Attachments:
QAM Demodulation.vi 30 KB
QAM Modulation.vi 30 KB
rx QAM.vi 57 KBThe conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Convert from LabVIEW 2011 to LabVIEW 9.0
Please convert from LabVIEW 2011 to LabVIEW 9.0
Attachments:
Watlow Vis.zip 76 KBLooks like somebody forgot to attach the zip file. Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Watflow.zip 57 KB -
Reference Library for Converting Between LabVIEW and XML Data (GXML)
Please provide feedback, comments and questions on the Reference Library for Converting Between LabVIEW and XML Data (GXML) in this thread.
The latest version of the NI GXML Library is availble in VIPM on the NI LabVIEW Tools Network repository.Francesco, Thank you for the feedback. With this component it was my intention to make a more "terse" version of the LabVIEW Flatten to XML VI that was also supported on RT and that gave the user more flexbility regarding the structure of the parsing type definition. I think you are right that the XML parser is not compliant to section 2.11 of the XML spec. The parser does specifically looking for a #D#A and this appears to be an oversight on my part. Please confirm for me, the specifcation is saying that the XML parser should be able to recognize three possibilities as an "end of line" character: #D#A, #D, or #A. Am I reading this right?There are more efficient (and in some cases much more efficient) ways of sharing data between LabVIEW and LabVIEW: some examples are flattened binary strings and the datalog binary format. XML is slower than these optons but the upside is that it is human readable. Furthermore XML is inherently hierarchical which is convenient for complex data structures like clusters of arrays of clusters, etc. If you don't care about human readability then you are correct XML doesn't make as much sense.I will return to the GXML source code and try to fix this in the near future but I would hope that instead of creating yet another custom VI from scratch that you could reuse what I have provided for you. I included enough documentation in the source code so that users could make some modificiations themselves. The target application for this reference library was LabVIEW to LabVIEW communication. As such I documented the schema on the dev zone document from a LabVIEW perspective. It includes all the supported datatypes and all the supported data structures (cluters, arrays, multidimensional arrays, clusters of multidimensional arrays, etc.) I do see some value in making a more conventional XML spec but the time investment required didn't really line up with my intended use case. Were there any other downsides to GXML that I have missed? Best Regards, Jeff TippsSystems Engineer - Sound and VibrationMessage Edited by Jeff T. on 04-21-2010 10:09 AM
-
Converting from LabView 4.0 to 8.5
I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?
Hi EKY,
converted to LV7.1 - should be ok now
But: there's a "missing dll"-error. You have to check this in LV8.5.
There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
TC081_LV71.LLB 29 KB -
Down convert from LabView 9.0 to 8.6
I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
Thank you.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel_LM6.vi 26 KBOnce again, saved in 8.0
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read_Value_From_Excel_LM6_nijams.vi 36 KB -
Help needed to up-convert my labview files from 5.1 to 8.6
I can't find any resource to up-covert a few of my old 5.1 vi's to labview 8.6. Can anyone convert them?
Thanks for your very appreciate help.
Roberto-
Solved!
Go to Solution.
Attachments:
oldVIs.zip 252 KBattached as 8.2, which you can open
Attachments:
oldVIs.zip 156 KB -
Can I convert a Labview 6.0 VI to a Labview 5.1 VI?
I have some Labview 6.0 lib files, I wish to convert them to Labview 5.1 files. How can I do that?
Go to "Save with Options" and you will see a selection for "Save for previous". This will save the VIs for 5.0 and later.
Be careful, if you have any elements that aren't available in 5.x, you may create some problems. -
I got the following problem. I'm using a Stanford DS360 UltraLow Destortion Function Generator, and would like to access it with the CwIVIFgen ActiveX Controll. In the driver database i found a instrument driver for LabView (ds360fg.llb). But its a llb file and i am not sure what to do.
Is it possible to convert it?
Is it possible to use it anyways?
Maybe i overread the answer, but i search the forums for quite a while now and i am not a bit wiser.
Thanks in advance
FelixIf you have LabVIEW and the application builder, a dll can be created from it but it cannot be used as an IVI driver. The only way to create an IVI instrument driver is with LabWindows/CVI. I personally don't have the time right now to create the dll but maybe if you post to the LabVIEW forum and get someone there to do it. Another other option is to hire an Alliance member to create either a dll from the LabVIEW code or to create an IVI driver from scratch.
-
Converting from LabView 4.0 to 9.0
I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
Attachments:
gj18i.llb 247 KBHey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1) for me! Thx
Attachments:
lgy1m.llb 73 KB -
Serial to parallel converter in labview
Hi. Does anybody know how to convert serial data to parallel data using labview? I already used shift registers but it's not working.
Ralp wrote:
I want to convert it to parallel boolean (true or false) by storing one bit of binary data in every registers so i can combine it in 1D array.
You still need to be much clearer. LabVIEW does not have "registers". LabVIEW is a programming language, not a circuit simulator.
What is the datatype of the serial data? booleans, bits, bytes, U8, etc.
What is the datatype of the parallel data? 1D array of what? How big can it get? What do you want to do with it?
Do you get one boolean at a time and simply want to append it to a boolen array? That would be trivial. What have you tried?
LabVIEW Champion . Do more with less code and in less time . -
Hello,
I have an old labview file created with 5.1 version. Currently I am using Labview 10.0, Could anyone convert the attached file to a newer version?
Many thanks!!
Solved!
Go to Solution.
Attachments:
AnaECP_REG.vi 310 KBHello,
I have an old labview DAQ file used with 5.0 Version. Currently I am using 10.0, Could anybody convert the attached file to a newer version?
Thanks a lot.
Attachments:
mywork - Copy of Old Version 5.llb 1040 KB -
How to convert to labview from lookout ?
I have software developed in lookout. I want to convert that to Labview 7.1.
Is there any method?There is no way to do so automatically.
LabVIEW with DSC module can do the similar thing as Lookout, but you have to redo everything in LabVIEW.
Ryan Shi
National Instruments -
Convert from LabVIEW 5 to LabVIEW 2014
hi,
I could not open VI. Could you convert this vi to LabVIEW 2014
Attachments:
mslumsrs.vi 432 KB
mslumsrs.vi 432 KBThat's okay. You can't.
The message about the duplicate post is some forum housekeeping to save people's time responding to this message in the event the other message is already answered. It just directs everyone to the first thread in case they stumble across this one first. -
Convert To Labview from hypertermi​nal
Hi,
I am using kind of laser to make experiment and i control this laser by using hyperterminal, i write codes like dl1 to open it and dl0 to close it etc and i can control it by using hyperterminal but i want to convert these codes to labview. i just want to control my laser by using labview, is it possible? I want to create button on labview to open and close the laser and make kind of switch to increase and decrease wavelength and panel to see actual temperature of laser i can see all of them just by using hyperterminal and i convert all of the to labview could you help me about it? fwom where i should start to convert these hyperterminal codes? (I am using rs232 to connect to computer for laser)
Second one i have two differenct labview software and i want to collect them in one labview software instead of opening two different labview is that possible. i measuere different scale by using these two software and i want to use just one labview to measure and save these data.
Thank you,
Best RegardsIf you can communicate with the laser with Hyperterminal, you can do so with LabVIEW. You must install the VISA drivers as well as LV. They come with it but are not automatically installed.
The other key thing to remember is that Hyperterminal appends a termination character (line feed?) to the end of each string it sends. You must do this explicitly in your program win LV if your device requires a termination character.
Start with the Simple Serial examples which come with LV.
To combine two programs into one you make one of them a subVI. Or you may write a master program and use both of your other programs as subVIs.
I recommend that you work through the on-line tutorials for Getting Started with LabVIEW. These will cover the basics of LV and will save you a lot of time and questions.
Lynn
Maybe you are looking for
-
Problem while downloading the alv output to excel file.
Hii, While downloading the alv output to an excel file i am facing a problem. Either the output comes as 1.23456E+11 or the values get cut . Cant put in txt file as the users require to calculate directy and i have even tried to increase the output
-
The File Explorer does not show links in the folder structure on a computer
Dear all, My general issue is that, when I connect my Z10 (SW release 10.2.1.2102) via USB, the File Explorer shows some folders from the connected PC. It does not list folders that are links on the computer. A lot of those links are duplicates in a
-
Intel, IPFW, and the "-q" option
I am seeing an issue on the new Intel processor Macs, both desktops and notebooks. In my environment I am noticing that the "ipfw" command has had its range of functions reduced. The "-q" option is no longer available in 10.4.x flavor of OS X (only o
-
Unable to publish a single site when I have created two
Using iWeb 08, I have created two separate sites. When I select one and attempt to publish to a folder, both sites are included. I cannot find a way to publish one site only. Am I overlooking the obvious or is iWeb so impressed with my work that it i
-
I need take take pictures with a 60D using may notebook as the monitor. How can I do that?