CONVERT_TO_LOCAL_CURRENCY not return correct amount

Hi expert,
I'm trying to convert 1000 USD to SGD using FM 'CONVERT_TO_LOCAL_CURRENCY'. As we know 1000 USD = 1736 SGD, but this FM return 17,36 SGD.
Kindly help me on this.
Below is the test code.
REPORT y_mr_exchange_rate.
DATA:
v_local_amount TYPE wertv8.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
*   CLIENT                  = SY-MANDT
    date                    = sy-datum
    foreign_amount          = 1000
    foreign_currency        = 'USD'
    local_currency          = 'SGD'
*   RATE                    = 0
*   TYPE_OF_RATE            = 'M'
*   READ_TCURR              = 'X'
IMPORTING
*   EXCHANGE_RATE           =
*   FOREIGN_FACTOR          =
   local_amount            = v_local_amount
*   LOCAL_FACTOR            =
*   EXCHANGE_RATEX          =
*   FIXED_RATE              =
*   DERIVED_RATE_TYPE       =
EXCEPTIONS
   no_rate_found           = 1
   overflow                = 2
   no_factors_found        = 3
   no_spread_found         = 4
   derived_2_times         = 5
   OTHERS                  = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
WRITE :
'CONVERT_TO_LOCAL_CURRENCY : ', v_local_amount CURRENCY 'SGD'.
RESULT :
CONVERT_TO_LOCAL_CURRENCY :                 17,36

hi,
try to add another couple of zeroes ...might be because of the last two digits being taken as decimal or being divided by 100...
regards,
syed

Similar Messages

Fsbtodb macro in ufs_fs.h does not return correct disk address

I'm using fsbtodb to translate the file inode block address to file system block address.
What I've observed is fsbtodb returns corretct disk address for all the files if file system size < 1 TB.
But, if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve value
Is this a known issue and is this been resolved in new versions
Thanks in advance,
dhd

returns corretct disk address for all the files if file system size < 1 TB.and
if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve valueI seem to (very) vaguely recall that you shouldn't be surprised at this example of a functional filesize limitation.
Solaris 9 was first shipped in May 2002 and though it was the first release of that OS to have extended file attributes I do not think the developers had intended the OS to use raw filesystems larger than 1TB natively.
That operating environment is just too old to do exactly as you hope.
Perhaps others can describe this at greater length.

Re: MyBestBuy Points not posting correct amount

Hi - I am going through some of my more recent activity and it looks like all sorts of funny things are happening with my points..
For example, I had an online order and it is splitting up everything into individuals purchases.
In addition, it looks like that you have to spend at least $10 to get the bonus for being elite. Take a look at my history and you'll see whta i mean..

Good morning dadud3r,
Thank you for taking the time to post to the forum!
I looked over your account using the email address you registered with the forum and can see that you placed an order on BestBuy.com about a week ago. It appears that particular order was broken up and shipped in four separate packages, which is why the points are split up in your My Best Buy™ account. You should see four separate lines with pending points for that order.
You are correct about a purchasing needed to be at least $10 in-order to receive the 10% bonus for having Elite status because points are usually not rounded up and 10% of $5 is $.50, so the bonus would post as 0. For the above mentioned order, you should see the correct amount of bonus points post to your account within about 20 days.
If you have any additional questions or would like for me to go over your My Best Buy™ account with you in additional detail, then please feel free to send me a private message and I will see what I can do to further assist. You can send a private message by clicking on the blue button in my signature labeled "Private Message."
I hope you have a wonderful day, and Happy Holidays.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Table not returning correct information

We had a problem where doing a select count(*) returned a number, but then when a select * was issued not rows were returned. Many iterations were tried. Some returning rows and others not. Then when trying to truncate FK errors occurred. Does anyone know what might have been the problem? Our solution was to drop and re-create the tables. This was in a test environment, but we don't want this to happen in production.
Thanks.

Something doesn't sound right to me. I haven't seen this happen in our Oracle databases but have seen this happen with a DB2 database
when an index was corrupt. The solution was to rebuild the index in that case. I'd issue a statement to validate the structure of the table
and its indexes:
analyze table table_name validate structure cascade;
From the 8.1.7 SQL manual:
VALIDATE STRUCTURE
Specify VALIDATE STRUCTURE to validate the structure of the analyzed object. The statistics collected by this clause are not used by the Oracle optimizer, as are
statistics collected by the COMPUTE STATISTICS and ESTIMATE STATISTICS clauses.
For a table, Oracle verifies the integrity of each of the table's data blocks and rows.
For a cluster, Oracle automatically validates the structure of the cluster's tables.
For a partitioned table, Oracle also verifies that each row belongs to the correct partition. If a row does not collate correctly, its rowid is inserted into the
INVALID_ROWS table.
For a temporary table, Oracle validates the structure of the table and its indexes during the current session.
For an index, Oracle verifies the integrity of each data block in the index and checks for block corruption. This clause does not confirm that each row in the table
has an index entry or that each index entry points to a row in the table. You can perform these operations by validating the structure of the table with the
CASCADE clause (described below).
Oracle stores statistics about the index in the data dictionary views INDEX_STATS and INDEX_HISTOGRAM.
See Also: Oracle8i Reference for information on these views
Validating the structure of an object prevents SELECT, INSERT, UPDATE, and DELETE statements from concurrently accessing the object. Therefore, do not use this
clause on the tables, clusters, and indexes of your production applications during periods of high database activity.
If Oracle encounters corruption in the structure of the object, an error message is returned to you. In this case, drop and re-create the object.
INTO table
Specify a table into which Oracle lists the rowids of the partitions whose rows do not collate correctly. If you omit schema, Oracle assumes the list is in
your own schema. If you omit this clause altogether, Oracle assumes that the table is named INVALID_ROWS. The SQL script used to create this table
is UTLVALID.SQL.
CASCADE
Specify CASCADE if you want Oracle to validate the structure of the indexes associated with the table or cluster. If you use this clause when validating a
table, Oracle also validates the table's indexes. If you use this clause when validating a cluster, Oracle also validates all the clustered tables' indexes,
including the cluster index.
If you use this clause to validate an enabled (but previously disabled) function-based index, validation errors may result. In this case, you must rebuild the
index.

Problems with EVGET not Returning Correct Results

We have several reports with EVGETs that are not working. It seems to be limited to gets on a particular datasrc when getting members at the base level. Here is an example.
Application: Budgeting
Deptid: D_07104
Account: A_612080
Product: P_070040
Project: PJ_NOPROJ
Time: 2009.APR
Datasrc; ACTUALS
Category: INPUT
At this point, all the members above are base level members. A standard EVGET will not return results at this intersection even though there is data. If we change any of the following (Deptid, product, time, or category) to a parent level member, data will be returned. Another action we can take to get data to return is open a new worksheet and write the same EVGET on the same intersection and it will return results. If we go back to the original sheet edit each formula and hit enter it will return the correct results. If we refresh the sheet, the results will disappear. We have also tried EVGTS and get similar results.
Another thing we have tried is copying a month of data from datasrc (ACTUALS) and category (INPUT) to datasrc (NEW_ACTUALS) and category (NEW_INPUT) through the BPC delivered copy. That seems to work. I don't know if the copy does something to load the data that we are missing. We also updated our fact table with a SQL update changing the datasrc and category the same way and processed the application and the data would return through some EVGETs and not others.

This issue can happen when you have for onde dimension multiple hierachies and something is wrong into hierachies.
Usually you have dimension formula where you are trying to do calculation of a member from H1 using members from H2.
This it is an example but it can be other possible errors.
Any way for sure your issue is related to one dimension having multiple hierachies.
Regards
Sorin Radulescu

Filr 1.1 LDAP Preview Not Returning Correct Number of Result

I'm finishing set up of Filr 1.1 in our environment but noticed today that the LDAP preview does not return the correct number of results. The query:
(&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
has been tried against multiple AD domain controllers and has so far returned 3 different user counts - 2895, 2800, and 2700. Mostly it always returns 2800. The correct count using powershell with the exact same ldap filter is over 5000.
I would prefer not to try a sync until I have some confidence that it will complete successfully. Any suggestions?

On Wed, 22 Apr 2015 17:26:03 GMT, jameswatson3
<[email protected]> wrote:
>
> I'm finishing set up of Filr 1.1 in our environment but noticed today
> that the LDAP preview does not return the correct number of results. The
> query:
>
> (&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
>
> has been tried against multiple AD domain controllers and has so far
> returned 3 different user counts - 2895, 2800, and 2700. Mostly it
> always returns 2800. The correct count using powershell with the exact
> same ldap filter is over 5000.
>
> I would prefer not to try a sync until I have some confidence that it
> will complete successfully. Any suggestions?
Could you try it with filr 1.2?
https://download.novell.com/Download...d=q-mgVFDsOKQ~

ADDT not returning correct results

Hello
SELECT tblTraders.trader_company AS trader_ref, tblTrades.trade_name AS trade_ref, tblT2t.t2t_id
FROM (tblT2t LEFT JOIN tblTraders ON tblT2t.trader_ref = tblTraders.trader_id) LEFT JOIN tblTrades ON tblT2t.trade_ref = tblTrades.trade_id
WHERE {$NXTFilter_rstblT2t1}
ORDER BY {$NXTSort_rstblT2t1}
With reference to the above SQL statement generated while using dynamic list wizard, the SQL does not return the correct results.
Sadly the SQL does not retrieve the field "trade_ref" and is blank when the "test" button is used.
Anyone got any ideas?
Cheers
Paul

Hi Paul,
does this query return the correct results when loading the page in a browser ?
Cheers,
Günter

Res.getPathTranslated() does not return correct URL of the page requested

Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
    /** Creates a new instance of SecurityFilter */
    private final static String FILTER_APPLIED = "_security_filter_applied";
    public SecurityFilter() {
    public void init(FilterConfig filterConfig) {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
        HttpServletRequest req = (HttpServletRequest)request;
        HttpServletResponse res = (HttpServletResponse)response;
        HttpSession session = req.getSession();
        String requestedPage = req.getPathTranslated();
        String user=null;
        //We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
        if(request.getAttribute(FILTER_APPLIED) == null) {
            //check if the page requested is the login page or register page
            if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
                //Requested page is not login.jsp or register.jsp therefore check for user logged in..
                //set the FILTER_APPLIED attribute to true
                request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
                //Check that the session bean is not null and get the session bean property username.
                if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
                    user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
                if((user==null)||(user.equals(""))) {
                    res.sendRedirect("Login.jsp");
                    return;
        //deliver request to next filter
        chain.doFilter(request, response);
    public void destroy(){
}

Guys any solution for the above problem?
Right answer fetches 10 duke dollars..

MessageChoice does not return correct value

Hi
I am problem with MessgeChoiceBean's improver beharior
For the first time it retunrs blank and subsequently In one page if I select Yes, it returns No.
In another page it does not return any thing for the first two selections. And I reciev flip values.
I ran VO outside, VO is returning correct values.
MessageChoice attributes and associated PPR:
Data Type: Varchar2
Initial Value: N
Pick List view Definition: oracle.apps.xxx.docs.common.lov.server.YesNoVO
Pick List View Instance: YesNoVO3
Pick List Display Attribute: Meaning
Pick List Value AttributeL LookupCode
ActionType: firePartialAction
Event: handleNewLocationFlagChange
Parameter Name: newLocationFlag
Parameter Value: ${oa.CustomerInfoVO1.NewShipToLocationFlag}
ProcessParameterForm Code:
if ("handleNewLocationFlagChange".equals(event))
String newLocationFlag = pageContext.getParameter("newLocationFlag");
Serializable[] parameters = { ""+newLocationFlag};
Class[] paramTypes = { String.class};
am.invokeMethod("handleNewLocationFlagChange", parameters, paramTypes);
VO definition:
select LOOKUP_CODE,MEANING
FROM ONLINE_DOCS_LOOKUPS
WHERE ONLINE_DOCUMENT_CODE = 'ALL'
AND LOOKUP_TYPE = 'YESNO'
ORDER BY ATTRIBUTE1
View output:
LOOKUP_CODE     MEANING
N     No
Y     Yes
I have quite a bit number of columns to change render property.
Any help will be appreciated.
Thanks
Prasad

Your question is not clear, are you saying the values in the messageChoiceBean is not displayed properly. As far as I can see from the definition the poplist picks the values from a lookup(Yes, No) values and has a PPR action associated with it. Did you check what this method handleNewLocationFlagChange is doing in the AM ?

Rtrim in where clause not returning correct data

A select statement specifying
where rtrim(field_name) <> ''
is not returning any rows even though there is data on the table with field_name not blank.
If this particular where clause is omitted the data is returned and rtrim(field_name) is populated correctly.
This is occurring across different tables and in both 10.2.0.4 and 11.2.0.1 databases. I can't find any references to this being a bug.
Has anyone else come across this ? Can anyone explain why this is happening please ?

An empty VARCHAR2 is considered NULL by Oracle.
sql> select 1 from dual where trim (' ') = '';
no rows selected
sql> select 1 from dual where trim (' ') != '';
no rows selected
sql> select 1 from dual where trim (' ') is null;
1
1

ERROR: FMS Server did not return correctly!

We have several adobe connect HOST meeting rooms. Lately, some users have sent us their complaints arguing:
"Unable to connect - FMS server did not return corrently"
I asked them to send me the test's details.
"App-Server returned: code:ok, servers=rtmp://fmwebserversec:1935/_rtmp://localhost:8506/,rtmpt://fmwebserversec:443/_rt mp://localhost:8506/"
I know, this threat has been post at this forum, but I don't find a solution for my users. The Adobe Connect Support is trying to give a solution, but at the moment, I haven't recieve any solution.
I' ve tried: disconnect firewall, anti-virus,... and they keep unable to connect. (using adobe connect hosted ver 7.5)
Thanks for your advice and help.
Rafael

Obviously this topic creates controversy

Bizzare error - datasource and getdate not returning correct day of week

Hi,
This is on CFMX 7.0.2,142559.
I have a data source pointing to a MS SQL server. There is a
simple query that access a date off the database and extract the
values of:
-. Current timestamp
-. Day of week
-. First day of week
The query has been running for years and suddenly it gives me
the wrong Day of week and First day of week, but the timestamp is
correct! The result of the calculation for the Day of Week suddenly
became one day ahead, the @@DATEFIRST switched between 6 and 7
(being 7 as the correct value).
Here is the code:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
@@DATEFIRST dteFirst, @@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
I tried to delete and recreate this data source, restart CF
and flush the cache with no success.
The really bizarre thing is for a few minutes after I restart
CF, it returnes the correct data, but then it suddenly moves one
day ahead - and again, only the Day of week. The DATEFIRST
sometimes returns 6 (instead of the correct value of 7) The
timestamp is ALWAYS correct.
I then created a second data source with exactly the same
parameters and named it "test456" and it works perfectly every
time!!
I am baffled as how this happened and how to fix it.
Does anyone know if somehow the datasource "test123" is
cached somewhere? Appreciate any advice/suggestions/ideas.
Aditya.

> The query has been running for years and suddenly it
gives me the wrong Day of
> week and First day of week, but the timestamp is
correct! The result of the
> calculation for the Day of Week and First day of week
suddenly became one day
> ahead.
>
> Here is the code:
>
> <cfquery name="dte0" datasource="test123"
> SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
> @@language LanguageVersion
> </cfquery>
> <cfdump expand="Yes" label="Query Dump"
var="#dte0">
When CF encouters the string within a <cfquery> tag,
all it does is resolve
any CF expressions (there are none in your example), and then
passes the
finalised string to the DB and patiently waits for the DB to
respond, at
which point CF converts the DB-specific result set to a CF
recordset, and
returns it to the calling code. There is very little
involvement on the
part of CF other than that: the DB does most of the work, and
is providing
all the data.
All that said, it does seem weird that one DSN returns one
thing, and
another returns something else. Is your test rig like this:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
<cfquery name="dte0" datasource="test456"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
IE: both queries to each DSN within the same CF template,
executed at the
same time.
(note: you have a syntax error in your <cfdump>
statement, so that actually
*isn't* the code you're running, because it would error).
If you run the query via some other client (like Query
Analyser, or SQL
Studio), what do you get? Does it differ from what CF
presents?
Adam

WebRequest not returning correct web page

Hello,
This is very strange, and I was hoping someone might have an answer/solution. If you try the link below using a Chrome browser, you will get the correct web page returned, however any other browser (and my vb.net app's WebRequest) returns a redirected
web page. I need to make my WebRequest behave the same as the Chrome browser. I changed the UserAgent to match Chrome, but that did not help. Any ideas?
http://www.ticketsnow.com/NBA/InventoryBrowse/Washington-Wizards-Tickets-at-Verizon-Center-in-Washington-1-31-2015?PID=1607397

Hello,
This is very strange, and I was hoping someone might have an answer/solution. If you try the link below using a Chrome browser, you will get the correct web page returned, however any other browser (and my vb.net app's WebRequest) returns a redirected
web page. I need to make my WebRequest behave the same as the Chrome browser. I changed the UserAgent to match Chrome, but that did not help. Any ideas?
http://www.ticketsnow.com/NBA/InventoryBrowse/Washington-Wizards-Tickets-at-Verizon-Center-in-Washington-1-31-2015?PID=1607397
I have no idea about what you mean.
I used both Chrome and Internet Explorer with that link.
Chrome redirected to -
http://www.ticketmaster.com/event/15004D1386FC189F?tnw=TN_Direct___1420612218_B_1607397_NBA&c=TE_TMPlus_NBA_B_1607397&brand=NBA&landing=c
IE redirected to -
http://www.ticketmaster.com/event/15004D1386FC189F?tnw=TN_Direct___1420612218_B_1607397_NBA&c=TE_TMPlus_NBA_B_1607397&brand=NBA&landing=c
So whatch you talkin bout Willis?
La vida loca

Request.getServerPort() not returning correct port

Hi,
I am using Oracle AS 10.1.2.0.2.
In my jsp request.getServerPort() returns me the webcache(HTTP Listen) port number, but it supposed to return me the port of my OC4J(defined in http-website.xml).
Could guys advice what need to change.

Hi Joni,
Is there a severe i18n bug in the servlet / jsp framework?Not a bug, but a limitation in the 2.2 java servlet classes. Up to Ver. 2.2, there was no way to tell the servlet what decoding to apply to the stream of bytes coming from the web page. Therefore, request.getParameter("toAdd") would always use its default platform encoding, typically something like Cp1252. So, suppose your web page sends bytes corresponding to a string containing the single Chinese character for tea in UTF8 encoding:
"\u8336" => 0xe8, 0x8c, 0xb6
which getParameter would decode into the three character string: "\u00e8\u008c\u00b6"
request.getParameter("toAdd").getBytes(); then returns an array of the original three bytes, and
new String(request.getParameter("toAdd").getBytes(),"UTF8"); then returns the original string "\u8336"
The good news is that in Ver. 2.3 of the java servlet classes all that nonsense above is unnecessary. The ServletRequest interface has a new method setCharacterEncoding(java.lang.String env), so all you have to do is insert
request.setCharacterEncoding ("UTF8"); before you call request.getParameter("toAdd") and your input byte stream will be correctly decoded. Works great.
Regards,
Joe

Update form not returning correct data selection in dropdown menu

Using CS3 DW along with SQL 2008 R2. I have a number of dropdown menus on an entry form (using VBScript/ASP) that are feed by SQL queries. All data is accepted in the entry form and writes to the table in the database without any issues. I created an Update form and based on a Rec ID clicked on from a list the Update form is presented with all the data in the correct fields except for one dropdown menu. All the other menus go to the correct selection except for the one. Spent 2 days attempting to resolve this. If I change the dropdown menu to a field the correct data is presented when the form comes up, but doesn't allow the user to make a selection from the menu. When I change it back to a dropdown menu the saved selection is not selected - just lists the entire list of items in the menu. Any help or ideas on this is greatly appreciated.

Hello All,
Once more thank you. I have sorted the issue out.
I observed that I was selecting the wrong field. I selected the field matching the record set of the select instead of the field matching the record set of the table I am working as seen on the image belew
I was selecting this - This is the record set of the table that hold values for the city select list
Instead of this. This is the record set of the table behind the form I am working on
My issue is now re-solved.
Mike

CONVERT_TO_LOCAL_CURRENCY not return correct amount

Similar Messages

Maybe you are looking for