Convert to symbol corrupted

hello, I have a simple motion tweened layer.
I convert it to a symbol, however when I do this, the tween
is corrupted.
Why is this happening only when I convert to symbol ?
thanks kindly for any help

select all frames/layers.
right click over them and select "copy frames".
Create a new symbol in the library - select frame 1 and right
click - "paste frames".
Drag symbol to stage on new layer and delete original layers.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
phil1943 wrote:
> hello, I have a multi-layer .fla.
> I want to convert all layers into a symbol.
> I select all layers, then choose "convert to symbol",
however the newly
> created symbol will not work properly ie. the motion
tweens have somehow become
> corrupted.
>
> Can you convert a multi-layered .fla into a single movie
symbol ?
>
> Thanks kindly for any help.
>

Similar Messages

Problem With Convert to symbol

I am having a stupid problem with the convert to symbol
function in Flash 8 pro. When I import to library and then convert
my first symbol, everything works fine. But then when I try to
convert another piece of art to a symbol, it becomes the same
symbol as before. so i can only convert 1 symbol. This just started
happening. I'm converting to graphic symbols, and I have even
uninstalled and reinstalled. Has anyone else had this
problem?

if you are trying to convert a symbol from a frame that
applied motion tweening, & the option "Sync" is
selected...

Help with Convert to Symbol

I'm trying to link a flash page to another flash page. I'm following the instructions given to me and it has worked up until now.
I convert the text to symbol>select button, then I go to actions, type in the filename.swf and add the level in the script assist.
The link is on a seperate layer, and I can't think of any reason why when I ctrl+enter to see it, the text hasn't changed to a button.
Any ideas or tips for what I'm missing or not doing quite right would be appreciated. Thanks, and I'm using CS3.

right click on your text, click convert to symbol, tick button (if that's the symbol type you want) and click ok. test. your text should respond to the mouse.
to code for a mouse handler, click on your text button, in the properties panel give your text button and instance name, say textBtn and in the actions panel type:
textBtn.onRelease=function(){
loadMovieNum("theswfyouwanttoload.swf",1);

All import convert to symbol ??

Is it best practice when importing, jpg and png to first
import to stage then convert to symbol (MC) then delete and now you
have it in the library to use?

quote:
Originally posted by:
Bolo911
Is it best practice when importing, jpg and png to first
import to stage then convert to symbol (MC) then delete and now you
have it in the library to use?
Huh? Why would you delete anything once you imported it into
the library? If you import an image then convert it to a movie
clip, you can't delete the imported image or else you will delete
what's in that movie clip. Like Urami said, I would only convert to
a symbol if you need to apply actionscript to it or need to tween
it.

Convert to symbol trouble

Hi, I am having trouble understanding the "Convert to symbol" instruction when I have already converted to symbol. I have drawn a stick figure, minus a leg, and modified to symbol. Within the symbol I have created another layer and called it "leg" and convert to symbol. From this symbol I want to create a motion tween, but it says convert to symbol. Is this to do with the fact that you can't motiontween something that looks like a line (leg)? It seems to make no difference if I click on or off the grey/black surround to the circle in the tool bar. (vectors?)
Thanks Georgia

Hi,
A symbol can have another symbol inside its definition(nested symbol) and motion tween requires your current selection to be a movie clip symbol in order to apply a motion tween on it. If your current selection is not a movie clip symbol(you can view what is your current selection is in Properties panel) then it asks you to convert the current selection to movie clip symbol irrespective of whether you are already inside an another symbol or not.
Thanks!
Mohan

How to undo "convert to symbol"?

Hey Guys,
First I have to say this community is really good. You have helped me
many times. Now, I have a question.
How can i undo "convert to symbol" without the normal "Undo"-button under "edit"- button
because I don`t want to undo everything since 3 days.
Hope you know what I mean and i`m sorry for my bad english.
Thanks.

Unfornately there is no undo (or as other Adobe applications, call it, 'Break Apart') 'Symbol' command, though it would make for a great request.
The best option, at the moment, is to
- Enter Edit in Place for that particular Symbol;
- Edit > Slect All;
- Edit > Copy;
- Exit Symbol In-Place mode;
- Then on your Stage, Edit > Paste Special > Paste All
Even then it will not be perfect because if your Symbol timeline has Triggers and Labels, the above process will not be copied/pasted. They will have to done separately.
Darrell

Convert Illustrator Symbols to AutoCAD blocks?

Hi, Is there a way to convert Illustrator Symbols to AutoCAD blocks? I've got the script discussed here: https://forums.adobe.com/message/6409758 and used it many times but now I need to do the opposite. Does anyone have an answer? I'd be really grateful of any help. Thanks. Justine

Thank you, nice job & I am looking forward to trying it out!

Problem converting £ and € symbols

Following conversion of a database to al32utf8 I noticed problems with converted currency symbols. This is a sample test I ran to reproduce:
1. Set the code page to 1252 as this is how the data was inserted in the win1252 database and create test data
sql> prompt set codepage
set codepage
sql> host chcp 1252
Active code page: 1252
sql>
sql> prompt create test data
create test data
sql> create table bc_test
2 as select '£ 1' col1
3           ,'£'   col2
4     from    dual;
sql>
2. create procedures for checking characters:
sql> create test procs:
2
sql> create or replace procedure check_chars (v1 in varchar2)
2 as
3    v2 varchar2(1 char);
4    n integer := 0;
5 begin
6    dbms_output.put_line('input: "'||v1||'"');
7    dbms_output.put_line('pos chr ascii');
8    dbms_output.put_line('--- --- -----');
9    if v1 is not null then
10      for i in 1..length(v1)
11      loop
12        v2 := substr(v1,i,1);
13        dbms_output.put_line(lpad(i,3)||'   '||v2||'   '||asciistr(v2));
14      end loop;
15    end if;
16 end;
17 /
sql> sho err
No errors.
sql>
sql>
sql> create or replace procedure check_col1
2 as
3    v1 varchar2(1000);
4 begin
5    select col1
6    into   v1
7    from   bc_test
8    where rownum = 1;
9    check_chars (v1);
10 end;
11 /
sql> sho err
No errors.
sql>
sql> create or replace procedure check_col2
2 as
3    v1 varchar2(1000);
4 begin
5    select col2
6    into   v1
7    from   bc_test
8    where rownum = 1;
9    check_chars(v1);
10 end;
11 /
sql> sho err
No errors.
3. Run procedure to check each column, then convert to al32utf8 and recheck:
sql>
sql> prompt check col1
check col1
sql> exec check_col1
input: "£ 1"
pos chr ascii
1   £   \00A3
2
3   1   1
sql>
sql> prompt check col2
check col2
sql> exec check_col2
input: "£"
pos chr ascii
1   £   \00A3
sql>
sql> prompt convert col1
convert col1
sql> update bc_test
2 set    col1 = sys_op_csconv(col1,'AL32UTF8','WE8MSWIN1252');
sql>
sql> prompt check col1
check col1
sql> exec check_col1
input: "Â£ "
pos chr ascii
1   Â   \00C2
2   £   \00A3
3
sql>
sql> prompt convert col2
convert col2
sql> update bc_test
2 set    col2 = sys_op_csconv(col2,'AL32UTF8','WE8MSWIN1252');
sql>
sql> prompt convert col2
convert col2
sql> exec check_col2
input: ""
pos chr ascii
sql>
sql> rollback;
sql>
The 1st column has had two extra characters added and the second has had the £ converted to null
4. Try with code page 65001
sql> prompt change codepage
change codepage
sql> host chcp 65001
Active code page: 65001
sql>
sql> prompt update col1 again
update col1 again
sql> update bc_test
2 set    col1 = sys_op_csconv(col1,'AL32UTF8','WE8MSWIN1252');
sql>
sql> prompt check col1
check col1
sql> exec check_col1
input: "£ "
pos chr ascii
1   �   \00C2
2   �   \00A3
3
sql>
sql> prompt update col2
update col2
sql> update bc_test
2 set    col2 = sys_op_csconv(col2,'AL32UTF8','WE8MSWIN1252');
sql>
sql> prompt update col2
update col2
sql> exec check_col2
input: ""
pos chr ascii
Same result, and matches what the DMU did
I get similar results with Euro symbols, they are converted to multiple multibyte characters
I can fix the data by running a replace, but what is happening? The data in most cases was added by running a script in sql plus, though some could have been via application tools.
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production

The behavior from your testcase is expected.
sql> create table bc_test
2 as select '£ 1' col1
3           ,'£'   col2
4     from    dual;
When run in a WE8MSWIN1252 database, this is effectively creating a table with 2 columns of 3 bytes and 1 byte in length.
sql> update bc_test
2 set    col1 = sys_op_csconv(col1,'AL32UTF8','WE8MSWIN1252');
When you update the column by converting its value from WE8MSWIN1252 to AL32UTF8, the 8-bit currency symbol expands in size which causes the converted value to be truncated to the column limit.
sql> exec check_col1
input: "Â£ "
pos chr ascii
1   Â   \00C2
2   £   \00A3
3
Here you're seeing the truncated conversion result due to the column size limit (3 bytes). The Pound sign is 0xC2A3 in AL32UTF8.
The DMU scan will detect size expansion over limit issues and block the conversion in such cases.

Objects converted to symbols not showing up in workspace CS4

Has anyone have this problem? It's extremely problematic when you're trying to design something. It plays fine when tested, but you cant see anything that's converted to a graphic, button, or movie clip. I tried uninstalling and reinstalling, rebooting, etc... Any other advice?
Also, I got an error message about the classic view not loading correctly, and everything's been goofy since. I still can't edit anything in classic view.

I found the answer to this on a previous post by someone else, but am unable to find it again. Will someone please help me find a posting with a similar topic? My symbols keep disappearing, but it works fine when I preview it.
If you need additional information, please let me know.
Thanks!

Import Manager - Convert Degree Symbol in XML

We have a situation whereby in our XML file we use the following code ° to convert to a degree symbol. So, in our XML file it would read 45°
When I import this in Import Manager I get this: 45° Street Elbows
In our Taxonomy we have this: 45º Street Elbows
So, when I Automap there's no matching because the symbols don't match. If you notice carefully, the degree symbols are different.
Does anyone have any suggestions that we can try so the symbols match?
regards,
Orlando

if you use utf-8 simply but the real character into the data.
named character entities such as
°
has to be declared in your dtd.
with character entities such as
° or °
are working fine.
regards,
gregor

Vector art converted to symbol displays incorrect in PDF?

Is there a known issue with symbols not displaying correctly in a PDF? I often convert grouped elements or logos to a symbol so that I can edit the symbol later and all instances of it being used in a doc will be revised. Saves a lot of time. I made this red box and type and made it a symbol. Now, when I make a PDF there is a phantom piece of type that should not be there. It does not happen on all instances. I checked the file in keyline mode. The phantom type is not there. Any ideas? Thanks.

Does the art have another fill or does it have an effect on different fill?
Is it point type? Perhaps outlining it will make it right unless this will have to be updated which it does not look like it will be.

Symbol corruption in ibooks

Hello All,
     The symbols in my compositions are not working in ibooks, but they work perfectly in Safari, Firefox and Chrome. They used to work in ibooks on my ipad until late December, then they suddenly seemed to become corrupt. When the pages load, bits of the animations flash on the screen for a second and then disappear. After that the pages function normally, but it happens with every page turn. Has anyone else had this problem?
     I have tried to copy and paste the symbols into new pages but the problem is also transferred onto the new pages. I tried to view it in ibooks on Mavericks on a desktop and got different errors. The flashing bits of animations were gone, but some of the pages didn't load at all. When the pages did load, some of the animations wouldn't play. I downloaded the trial of version 3.0 and copied a couple of pages into that but it is still the same.
     I am loathe to begin all the work of recreating my symbols from scratch because what if it happens again? how do I know I will not get to the end only to have the symbols suddenly become corrupt all over again? To say that I am frustrated would be the understatement of the century! ANY information would be greatly appreciated.
Thanks and best to everyone,
Emmy52

The problem is with the audio files!
Upon further testing in the ios simulator and on my ipad, I discovered that when I remove the audio files my pages work perfectly. The pages load properly and the elements within the symbols do not flash on the screen. I do not understand this at all. Furthermore, some pages seem to work in some of the simulated devices even with the audio included (though never when the device is 'rotated' and never on my actual ipad). I am including a table to more clearly show my results:
The final page of my project does not include any symbols or audio files so it always works. The first page includes includes several symbols, and two audio files. Two of the symbols and the audio files are actived by click events so that they play at the same time. All of the other pages have multiple symbols, four of which are activated by clicks to play along with their corresponding audio. I will now attempt to figure out what is different about the first page. Why does it load properly when the other pages do not?
I don't think it is the audio files themselves. I have tried various files in mp3, mp4, and ogg. The problem seems to appear the second I drag the audio from the media folder onto the stage. I also tried doing it the old way by putting the html media element into the composition ready area, but the second I referenced the actual audio files my page stopped loading properly.
This is so frustrating because it all worked just fine until late December. Why did it change all of a sudden?
If anyone has ANY information or suggestions I would be really appreciate hearing them.
Best to all,
Emmy52

Cannot Select All Modify Convert to Symbol (F8)

Hello,
I am a beginner and I have made an animation that consists of 4 Movie-Clip symbols (3 have motion tweens). I created it as a place holder for an upcoming website that I am designing. I am trying to select all 4 layers on my stage and convert everything into a single movie clip. I don't know what I am doing wrong.
I would really be happy if someone could give some tips on how to fix this.
Thanks!

Thanks for responding. I followed your instructions. I first Inserted a Symbol of type Movie Clip > Then selected all frames from Scene 1 > Copy Frames > Went to my new movie clip > Selected the first and only frame in the 1st and only layer > Right click > Paste Frames.
All this did was copy every layer in its entirety into my new movie clip. If you look where the little red man is pointed , that's the target frame, but it's empty. You'll notice that even my guides came over from the copy.
What am I doing wrong?
The frames that I am copying are on the stage of Scene1. Is this normally how it's done?

Convert to symbol -- insert AS

Hi,
I'm totally new to flash and I have a question about converting images to symbols (movieclip):
First I import the image, then select it with the selection tool, and hit F8 to convert it to a symbol (movieclip). But when I want to add actionscript to this symbol, I cant see it when i go to actionscript window (F9). Isn't the newly created symbol supposed to appear under Scene1? What basic step am I missing?

What you mean you can't see it? You mean the Actions Panel is covering the whole monitor? Can you attach a screenshot and point what you can't see The newly created symbol should be under Scene1.

Convert to Symbol

Quick question (I think), can you convert an UILoader to a
symbol?
I want to read from an XML file and dynamically load images
with an UILoader for each image. In the end I'd have an array of
images. However I'd like to change all of them to a symbol
(specifically Graphic) so that I can have a function that changes
the alpha of the images. This way I can have a fade in and fade out
affect displaying all of the pictures without statically defining
the number of pictures.
There might be another way too, because there is an alpha
with the UILoader. However I've tried that and it's not working for
me.
I'm not sure if that all makes sense. Ask questions if it
doesn't. Thanks so much!

As soon as I posted this I think I figured out why I can't
find the answer. The whole point of symbols is that they are
already in the library at compile time. It doesn't make sense to
dynamically create symbols.
Is this right?
And if this is the case, could someone help me understand the
point of the alpha for a UILoader and possible reasons why it might
not be working??
Thank you :)

Convert to symbol corrupted

Similar Messages

Maybe you are looking for