Convert vi from LabVIEW 5.0 to v.8.2
Hello-
I am trying to open a subVI in LabVIEW 9.0 but it was written for v. 5.0... someone told me that if I open the vi in a version before 8.2 and save it, then I should be able to open it in 9.0. I don't have any version before 9.0 so he suggested that I post the file on this forum... I have attached the subVI so if someone could please convert it (who has a version of LabView older than v. 8.2) it would be much appreciated!
Thanks!
Attachments:
SBImodem.vi 49 KB
SBIprinter.vi 49 KB
Hi NEGR,
as long as you don't give us the missing subvis it's pretty useless to convert the vis...
(Now in LV7.1)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
SBImodem.vi 34 KB
SBIprinter.vi 34 KB
Similar Messages
-
How to convert llb from LabVIEW version 8 to 7.1
Can someone tell how to convert the llb from LabVIEW version 8 to version 7.1?
I hope to sent the program to the others, but the other side are using LabVIEW version 7.1 but not version 8.0.
I know I can save to VI file as previous version, but it contains severals of VI in the library, it is quite time consuming.
Can everyone sugguest any method or solution to solve my problem.
Thanks.Hi anson,
it will run also in LV7.1 - but you should check those warnings (probably things not/differently supported by LV7.1...) anyway!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Please Convert tktds5xx from LabView 2012 to LabView 2011.
I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip 777 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip 529 KB -
Please Convert Vis from Labview 2013 to Labview 2011
Please convert the attached Vis from Labview 2013 to Labview 2011
Solved!
Go to Solution.
Attachments:
Convert from2013 to 2011.zip 255 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Converted to 2011.zip 176 KB -
I can't convert .vi from labview 5.0 to 8.6
I'm tring to convert a labview project from 5.0 version to 8.6 version. I know that direct conversion is not possible. I saw at this link:
http://zone.ni.com/devzone/cda/tut/p/id/8387
that conversion is possible by intermediate comnversion with 8.0 version (I have it).
Unlikely somethings wrong happen when I try to open my original labview 5.0 .vi with 8.0 version.
Do someone know alternative version to convert my project????
thanks in advance
A.
Attachments:
scrivemoo.vi 116 KBalbs wrote:
this is strange because I open it without problems with labview 5.0. I try to attach it again
thanks
There is still a problem with that VI. Are you sure it's written in LV 5. I get the error which is shown below. But PLEASE move this conversion to HERE
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012 -
Convert code from LabVIEW 2009 to LabVIEW 8.6
Hi Everyone,
Could a kind person with LabVIEW 2009 please save the attached code in LabVIEW 8.6.
The code is of the Creating an Office 2007-like Ribbon in LabVIEW community page.
It would be very helpful!
PS. Will reward kudos.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Solved!
Go to Solution.
Attachments:
LabVIEW Ribbon.zip 306 KBAny problems let me know and I will look at again
David
www.controlsoftwaresolutions.com
Attachments:
New Folder (2).zip 108 KB -
Hi.
I need to access to odbc database from LabVIEW 4.1. I looked through
the online reference and found that it looks like that the only way to
do it is to buy additional pack for accessing the DBases. For me it is
not the best case, though.
Is there any other way to work with odbc databases than that?
Thank you.
---Dmitry Rozmanov.This was already taken care of here: http://forums.ni.com/t5/Version-Conversion/convert-vi-from-LabVIEW-4-1-to-LabVIEW-2013/td-p/2735335
For future reference place all of these type of requests in the Version Conversion subforum.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos! -
Need to convert to labview 11 from labview 12
hello
I need to convert the following Labview 12 VIs to Labview 11.
thank you in advance
Attachments:
QAM Demodulation.vi 30 KB
QAM Modulation.vi 30 KB
rx QAM.vi 57 KBThe conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Down convert from LabView 9.0 to 8.6
I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
Thank you.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel_LM6.vi 26 KBOnce again, saved in 8.0
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read_Value_From_Excel_LM6_nijams.vi 36 KB -
Convert from LabVIEW 2011 to LabVIEW 9.0
Please convert from LabVIEW 2011 to LabVIEW 9.0
Attachments:
Watlow Vis.zip 76 KBLooks like somebody forgot to attach the zip file. Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Watflow.zip 57 KB -
Converting from LabView 4.0 to 9.0
I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
Attachments:
gj18i.llb 247 KBHey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1) for me! Thx
Attachments:
lgy1m.llb 73 KB -
Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011
Hello,
can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
Thank you very much for your support.
Solved!
Go to Solution.
Attachments:
TCPIP_Nagle_algorithm.zip 63 KBAdditionally I am sorry that I have put my post in LabVIEW and not under Version Conversion
-
Converting from LabView 4.0 to 8.5
I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?
Hi EKY,
converted to LV7.1 - should be ok now
But: there's a "missing dll"-error. You have to check this in LV8.5.
There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
TC081_LV71.LLB 29 KB -
Convert from Labview 5.1 to labview8.6
Hello Everyone,
Can any one please convert this vi from labview 5.1 to labview 8.6 or labview 2009
Thanks in advance
Nadim
[email protected]
Attachments:
4-Channel Power Spectrum with estimate.vi 750 KBHi,
Here it is in LV 8 but there are some VI's missing (DAQ)
Kees
Attachments:
4-Channel Power Spectrum with estimate.vi 402 KB -
Connecting converted tool from VBAI to LabView
Hey all,
I'm really trying to connect to VI's together, one being a converted tool from VBAI and the other one, just a normal Labview coding.
The two VI's are attached with this message. Could anyone help me connect them together?
Kind regards
Xavier
Attachments:
GetImageExample.vi 31 KB
Craig's tool.vi 75 KBDear Nathan
I know I didn.t give much precision on that, but that's because I'm not so confortable with LabView, but I'll try and do my best.
So to start with, I am using a thermal camera provide by a company called LAND. LAND has developed a few SubVI so that the thermal camera can be used on LabView. This is represented by attachment 1.
Then, a few weeks ago, just for a trial, I have tried converting a tool from Vision Builder for Automated Inspection to LabView (no problems). After a little while, I manage to connect the new tool converted from Vision Builder (useless tool but just for trial; attachment 2) to the main SubVI, and data was coming out of all this (everything up until there was fine).
Then the next thing was to create the tool I wanted to use on Vision Builder, which didn't take long and I converted it to Labview. But finally, when it came to connecting the main SubVI (attachment 1) to the usefull tool from VBAI I wanted to use (attachment 3), I couldn't manage to find my way.
So this is what I am trying to do, that's to say, being able to use the tool developped in VBAI (attachment 3) to analyse the image I get from the main SubVI (attachment1) and get some data.
Any kind of help would be highly appreciated.
Thanks in advance
Xavier
Attachments:
Main SubVI.vi 32 KB
Main SubVI to first converted VBAI tool.vi 113 KB
Find Objects with ROI.vi 54 KB
Maybe you are looking for
-
How can I see a preview of an image like in CS5?
ok I open a folder to find an image and have no clue which one I want; used to be I could click on an image and there would be a little preview of it at the bottom so I know what it is, can't figure out how to do this in CS6, I use it constantly s
-
When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless ro
-
Macbook pro appears to be on but screen is black,also freezing up in iPhoto
bought my macbook pro in march or april of this year. just recently i had an issue when i started up i could hear it turn on but the screen was still black. i shut it and opened it a few times and it seemed to help but still wondering if there is a p
-
The iPad just won't allow apps without the code. Can anyone help?
I live in Ireland. Not the UK. So I don't have a postal code. Without a postal code I have no billing address. Without a billing address I can get no apps. Any ideas?
-
Hi All, I have below tables, Tables 1 Employees Type (Tells About Employees Designation) 2.Employee Details (Tells Employee Details) 3.Employee Relation (Tells Relationship between Employees) Hierarchy ARC (SENIOR MANAGER) SUN (MANAGER) MOON (TECH LE