Convert VI from private to public

Trying to make a private VI public. I clicked open the class from explorer and moved the file from private to public. Then I physically moved it from private dir to public. Class access now says public, saved the class. When I try to put it in a block diagram it is still private. What must I do?
thanks,
jvh
Solved!
Go to Solution.

Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Can you change a shared calendar from private to public?

I created a shared private Calendar for my family. I would like to change it to a public calendar so I can view it in my MS Outlook for work. Is this possible to do without losing all of my current data?

Thank you for that, however I am not given the option to select public nor private. The calendar is already being shared so when I select the share button next to the calendar, the only items I see are the email addresses of the people I am sharing the calendar with.

Unable to send a message from Private workflow to Public Workflow!!!

hi,
I have one RequestorPrivate & Requestor Public workflow.
The Requestor Private is triggered by an XML Event and performs some business
operartions and based on a certain condition,
it triggers Public workflow.
My problem is, when i start my public workflow i'm specifying the xml variable
to be passed.
How i can caputure the same variable in the public workflow???
1.Whether we need to get it while starting the public workflow??
or
2.WLPI itself handles this???I mean, public workflow automatically gets it???
From the HelloPartner Example (that is bundled with Collaborate),
is just passing the variable from private workflow , but not getting in the start
node of the Public Workflow.From that i got the picture that WLPI handles this
by itself???
If this is the situation why i'm getting a NullPointerException, in my case when
i tried to get the incomming message in my public workflow???
Expecting an early response..
Thanks in advance
Sreekala

Dear Pradeep,
1. Yes, our SMS provider is "HTTP compatible"
2. I kept Maximum length = 300 bytes, as our registered message with provider was bit lengthy and rest of the settings in the screen shot remains same.
Issue still remains. Is there any thing do with " Device types for Format conversion " (scot-->settings-->Device types for Format conversion) ?
Please suggest.
Rgds,
Durga.

Converting byte from dec to hex

Hi All,
I'm having a problem converting byte from decimal to hex - i need the following result:
if entered 127 (dec), the output should be 7f (hex).
The following method fails, of course because of NumberFormatException.
    private byte toHexByte(byte signedByte)
        int unsignedByte = signedByte;
        unsignedByte &= 0xff;
        String hexString = Integer.toHexString(unsignedByte);
        BigInteger bigInteger = new BigInteger(hexString);
        //byte hexByte = Byte.parseByte(hexString);
        return bigInteger.byteValue();
    }

get numberformatexception because a lot of hex digits cannot be transformed into int just like that (ie f is not a digit in decimal) heres some code that i used for a pdp11 assembler IDE... but this is for 16-bit 2s complement in binary/octal/decimal/hex , might be useful for reference as example though
    public static String getBase(short i, int base){
        String res = (i>=0)? Integer.toString((int)i,base)
                : Integer.toString((int)65536+i,base) + " ("+Integer.toString((int)i,base)+")";
       StringBuffer pad= new StringBuffer();
        for(int x = 0; x < 16 - res.length() ; x++){
            pad.append("0");
        res = pad.toString() + res;
        return res;
    }

Property semantics - private vs public APIs

Hi,
Question about property directives and how to enable separate public and private semantics.
In my class's public interface I would like a property to be read only so I declare it as follows:
@property (readonly) someproperty;
However, within the class I would like to set the property and have the convenience of retain being called and set to nil through the property so the release happens. So I would do the following:
@property (retain) someproperty;
Now the two semantics are not entirely mutually exclusive. I could do the following:
@property (readonly , retain) someproperty;
However, external users of the class can use the setter which is not what is intended. Coming from a Java and C# background it seems that objecive-c does not provide as robust a syntax for making clean distinctions between public and private interfaces.
What strategies can you suggest to achieve my goals of keeping my private and public semantics and usage clear? Any good web resources on the broader subject of best practices in API design in objective-c?

Yes class-dump can always be used to generate public interfaces in a hostile world but that's not really the point. The issue is how to generate clean interfaces for a team of software developers. Anyway after talking to Matt, I have answered my own question: a synthetic property, a category plus a hand coded setter will make this work. Once the bug in @synthesize is fixed this will be nice solution to the problem.
Here are a few bits to illustrate:
In MyClass.h
@interface MyClass
@property (readonly) id someProperty;
@end
In MyClass.m
#import "MyClass.h"
@interface MyClass (Private)
@property (retain) id someProperty;
@end
@implementation MyClass
@synthesize someProperty;
// Bug - hand written setter needed since @synthesize will not generate one for me
- (void) setSomeProperty: (id)newProperty
if (newProperty != someProperty)
[someProperty release];
someProperty = [newProperty retain];
@end
Files that import MyClass.h will only have access to the getter while the setter is available to MyClass.m.

[svn:fx-3.x] 7499: Addendum to fix for BLZ-233 - adjust visibility of new internal heartbeat util methods to protected from private .

Revision: 7499
Author:   [email protected]
Date:     2009-06-02 16:10:08 -0700 (Tue, 02 Jun 2009)
Log Message:
Addendum to fix for BLZ-233 - adjust visibility of new internal heartbeat util methods to protected from private.
QA: No
Doc: No
Checkintests Pass: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-233
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

inspired2apathy wrote:
... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
... What am I missing?THE BASICS. See if this isn't what you are trying to do.
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class Test
public static void main(String[] args) {
    JTextArea ta = new JTextArea();
    ta.setLineWrap(true);
    ta.setWrapStyleWord(true);
    JScrollPane sp = new JScrollPane(ta);
    JFrame f = new JFrame();
    f.getContentPane().add(sp, "Center");
    f.setBounds(0, 0, 400, 300);
    f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
    f.setVisible(true);
}OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly.

Assosciation private and public

I would like to have some responses from you guys. From OOAD point of view what are the considerations to be kept in mind before making an assosciation private or public.
Any ideas would be welcome

Containment associations will most often be private.
Consider the following:
Class Node is to be kept in a list which Class A manages.
First example.
Class Node is defined as a private inner class of Class A. Class A keeps a list of Nodes using a private instantiation of the ArrayList class. Node is private. The ArrayList is private. So when diagramming it the association is certainly private.
Node is wholly owned and contained by A. If A is deleted then all Nodes are deleted.
In this case one might make the point that because this is entirely private that it implementation rather than design. So it shouldn't be diagrammed at all. But sometimes it is necessary to do this to show how it will meet the needs of the system (or because a junior programmer is doing the coding and you want it to be painfully obvious.)
Second example
Class Node is a public class (not part of Class A.) Class A keeps a list of Nodes using a private instantiation of the ArrayList class. So when diagramming it the association is certainly private.
Again in this case A owns all of the Nodes.
Again the association could be consider an implementation detail (diagram is not necessary.) But because there are now external users, it might be more relevant to detail explicitly that a list of these is being kept.
For the above two examples 'private' might also serve the need of the code generation capability of the two. Neither of the above associations should ever be implemented publicly.
Third example
A variation of the examples above is where the association is to be managed by one or more external systems. If there is one external system then it can own it. But if there is more than one, then the assocation must be public.
In this case it is certainly possible (and likely) that A does not own the Nodes that it is associated with.
Fourth example
If the relationship between A to Node is many to many than the association is always external to A and Node. So unless it is explicitly owned by a single external system it must be public. Never make the mistake of trying to have either class try to own it.
In this case A never owns the Nodes that it is assocated with.

Need to convert Date from calendar to String in the format dd-mom-yyyy

Need to convert Date from calendar to String in the format dd-mom-yyyy+..
This is absolutely necessary... any help plz..
Rgds
Arwinder

Look up the SimpleDateFormat class: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
Arwinder wrote:
This is absolutely necessary... any help plz..For you maybe, not others. Please refrain from trying to urge others to answer your queries. They'll do it at their own pace ( if at all ).
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

How can I convert Pdf from RGB to CMYK, keeping font color 100% K while working in Illustrator?

How can I convert Pdf from RGB to CMYK, keeping font color 100% K while working in Illustrator?
When I try to open the document in Illustrator and I convert to CMYK the black font converts to rich black, but to set up for Offset printintg I need the text to be only in Black (100%K).
The original source of the document is a Microsoft Word file, I have converted the Word file to Pdf in order to setup for OFfset Printing.
Thanks

I have tried that way, but the downside is that the fonts are set in gray not in a 100%K, also I have to deal with other fonts that are composites and meant to stay Full Color. I could select text by text and convert to gray but, its a 64 page document and I wouldn't want to make a expensive mistake.

Error when starting a converted VM (from vmware server edition)

Hi, i am trying to start a converted VM from VMWARE SERVER. I think i have followed steps to import an VMWARE machine (using resources >> virtual machines images) and it does not return errors when converting VM but then, when trying to start it, it returns
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise e
I have also checked that there is enough memory.
This is the contect for vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/SIR_xxx/SIR_xxx.img,hda,w',
'file:/OVS/running_pool/SIR_consulnor/SIR_xxx (2).img,hdb,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '512'
name = 'SIR_xxx'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '1'
uuid = 'e23767cc-dc3d-0255-a7ac-65f111b589d7'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:71:AF:B1,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxx'
vncunused = 1
Thanks for your help

user559432 wrote:
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise eDo your servers have Hardware/Full Virtualization enabled? You can check on the console and ensure the console says that Hardware Virtualization is enabled. If not, check in your BIOS that the processor hardware virtualization is enabled. If you don't have an option, your PC may not have the Intel VT-x or AMD-v extensions required to support hardware virtualization.
You can check to see if your processor supports this extension by using:
Intel processor:
# cat /proc/cpuinfo | grep vmxAMD processor:
# cat /proc/cpuinfo | grep svmIf you see a result, it means the processor has that support. You still need to ensure that it is enabled in the BIOS.

How to convert date from "yyyymmdd" to "MM/DD/YYYY" format

1. I have one BLDAT field in my internal table.
   its getting updated from input file.
2. The value in the input file is like yyyymmdd.
   So the internal table field is filled like this
   "YYYYMMDD".
3. After this,I have to compare this internal table
   field with BSAD table.
4. The BLDAT field in BSAD table is in the format of
   "MM/DD/YYYY".
5. the BLDAT field is having diff format in internal table and BSAD table.So I am unable to check this value.
How to convert it as like the BSAD table format."MM/DD/YYYY" format.
Thanks in advance!!

Using the WRITE statement
data: gd_date(10). "field to store output date
* Converts date from 20020901 to 09.01.2002
write sy-datum to gd_date mm/dd/yyyy.
OR u can
CONCATENATE gd_date+4(2) gd_date+6(2) gd_date+0(4)
into gd_date seperated by '/' .
Hope this helps.
Kindly reward points and close the thread for the
answer which helped u OR get back with queries.

How to I convert data from oracle database into excel sheet

how to I convert data from oracle database into excel sheet.
I need to import columns and there datas from oracle database to microsoft excel sheet.
Please let me know the different ways for doing this.
Thanks.

asktom.oracle.com has an excellent article on writing a PL/SQL procedure that dumps data to an Excel spreadsheet-- search for 'Excel' and it'll come up.
You can also use your favorite connection protocol (ODBC, OLE DB, etc) to connect from Excel to Oracle and pull the data out that way.
Justin

Convert report from SAP to Excel

Hi All,
How to convert report from SAP to Excel.Here now taking default text(.txt) format.But we want defualt taking (.xls) format only.
Regards
Usha

hi usha
u can even export the text in txt format and later right click and open with excel , u wont be able to directly import it into excel as it is not giving u any option to upload in excel directly
Regards,
Manish

Error while converting schema from oracle to SQL server

Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.

The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks.

Any idea why my saved documents are unable to be read? "convert file from" box pops up, applications are listed to use but if any are chosen, the file then opens but is in symbols

When attempting to open saved documents for viewing a box pops up "convert file from" with applications that can be chosen from to use. When any of the options are chosen the document then opens but is in symbols and is unreadable. This is happening with all saved documents. Can you offer any help with this?

Hi,
If you don't find any clue, you can send your file to me (guillaume.rouyreATgcosiDOTcom, replace cap) so I can give a try.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Convert VI from private to public

Similar Messages

Maybe you are looking for