Convert VIDEO_TS to Disk Image?? (.img or .iso)

I have several VIDEO_TS folders that I want to turn into a disk image - either .img or .iso
What programs if any, can do this?? - Thanks in advance!

Roxio Toast.

Similar Messages

  • How to convert read-only disk image to read/write disk image?

    There was some problem with the Mavericks firmware and i keep getting the "white screen of death". I tried the method of backing up Macintosh HD to an external drive via Disk Utility. The problem is I saved it as a compressed file (read-only). I wasn't aware of the problem and went ahead and delete the original Macintosh HD files and set up everything fresh.
    Then when i wanted to back up all my old files from Macintosh HD disk image back up that i created, i can't because the dmg is read-only. I tried to convert it to read/write with disk utility but it couldn't.
    Is there another way to extract the videos and photos? That's all i need.

    A blank empty read only disk image has never been possible. If it's read-only, it cannot be modified, and so it would be blank and empty forever. Not much point in that.
    If you want read-only and encryption on your finished disk image, you'll have to put your files into a folder, and then do File -> New -> Disk image from folder.

  • What release level of code do you get when you download a disk image (ISO/IMG) of a click-to-run Office 2013 product?

    I’ve asked a similar question to this on an Office Community Forum but nobody knows the answer.  So
    I was hoping that an IT professional responsible for installing and deploying Office 2013 might know.
    If you download an installation disk image (ISO/IMG) of a click-to-run Office 2013 product from office.microsoft.com/myaccount (Account Options:
    Install from a disc > I want to burn a disc), what release level of code do you get? 
    Now that Service Pack 1 is available, do you get a disk image with Service Pack 1 incorporated? 
    Or do you still get the RTM (Release to Manufacturing) level of code?

    Diane, thank you for the reply.
    I was hoping that someone who has downloaded a disk image since SP1 became available would be able to confirm that for a fact.
    I have just found a good description of Click-to-Run on Technet that I didn't know existed.  The link is: http://technet.microsoft.com/en-us/library/jj219427(v=office.15)
    The article states:
    "Click-to-Run products that you download and install from Microsoft are up-to-date from the start. You won’t have to download and apply any updates or service packs immediately after you install the Office product."
    This statement is probably true if you click the Install button on office.microsoft.com/myaccount and install "in real-time" over the Internet.  However, I know for a fact that it is not true if you order a backup disk (Account
    Options: Install from a disc > I want to purchase a disc).  All you get is RTM level code (15.0.4420.1017).
    So I still feel uneasy about what release level you get if you download a disk image.  I don't want to download what might be the better part of 1GB of code over the Internet only to discover it is back level.
    Addendum (6 April 2014): I decided to perform an experiment.  I looked at the size of the data on my backup disk which contains RTM level code.  It is 2.04GB.  I then went to office.microsoft.com/myaccount and clicked to download a disk
    image of my Office 2013 product.  The pop-up window that asks me whether I want to Run or Save the file informed me that the size of the file is 2.04GB!!!  I cancelled the download.  I strongly suspect that, if I had continued with the
    download, I would have received the same RTM level code I already have dating back to October 2012.  I think this is awful customer service.  To some extent, I can understand the logistical problems of replacing backup disks lying in warehouses
    waiting to be shipped.  But I cannot understand why disk images on download servers cannot be refreshed quickly.

  • How can i convert a .img disk image to a .dsk disk image?

    I own an intel-iMac running MacOS 10.5.6.
    I own both an Apple //c and Apple System Disk 4.0.2.
    I now have an emulator called Virtual ][.
    I also have a disk image of the Apple System Disk 4.0.2,
    but it is in the .img format. I need it to be in the .dsk
    format so the emulator can "see" the disk and run it.
    How can I convert from .img to .dsk?
    Thanks,
    Apple //GS

    have a look here:
    http://discussions.apple.com/thread.jspa?threadID=246070

  • Convert video_ts and audio_ts to iso

    Hi. I used Finder and drag-and-drop to copy a DVD movie to my hard drive. To do this, I created a new folder with the name of the movie. I then dragged-and-dropped the video_ts and audio_ts files from the DVD to the folder. The result is that the movie folder has two sub-folders, one for video_ts and one for audio_ts. Inside the sub-folders are all the bup, ifo and vob files. I can point Apple DVD Player or VLC media player to the movie folder, and both play the movie just fine.
    I then used Disk Utility to create an iso file from the movie folder on the hard drive. After opening Disk Utility, I did File > New > Disk Image From Folder, and pointed it to the movie folder (not to a sub-folder). I selected DVD/CD Master as the image format then clicked Save. It produced a file with a .cdr extension. Apple DVD Player would not play the resulting movie. VLC plays the movie, but video only - there is no sound?
    Any advice on how to create an iso file from the movie that actually works? Thank you.
    Message was edited by: pomme4moi

    Is it a commercial DVD movie? They are usually encrypted, so can not be copied with Finder or Disk Utility unless you use FairMount.
    <http://www.metakine.com/products/fairmount/>
    A normal DVD does not use the AUDIO_TS folder. Video and audio are in the VIDEO_TS folder. You can just drag a VIDIO_TS folder onto DVD Player's dock icon to play them. You can also play them with "Open Disc" in VLC's "File" menu.
    If you want to create a disk image file using Disk Utility, make it from the original DVD, not from files ion your had drive.
    <http://support.apple.com/kb/ht2059>
    If you usee the VIDEO_TS folder from your hard drive, the image will net be in UDF format, so DVD Player won't recognize it as a movie (though it can still play the VIDEO_TS file).
    To make a UDF image from a VIDEO_TS folder, use Burn
    <http://burn-osx.sourceforge.net/Pages/English/home.html>
    Select the "Video" tab. set the format to "DVD-Video", drag the VIDEO_TS folder into Burn's window, then use "Save Image" in the "File" menu

  • How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    How do I convert my Windows 7 Folder to an ISO image to burn to my  USB Flash drive (16GB)  in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    Sorry - confusing - My question has NOT been solved yet - can anyone help?

  • How do I convert TC sparse bundle to disk image?

    Ok, this question could be cross-listed under a number of threads, so I had to just pick one...
    A few months ago, the HD in my MB was clearly dying, so I replaced it with a larger, faster drive. All good, until I realized I had been close to maxing out my Time Capsule before I upgraded my MB's HD, so I upsized that, too.
    Fast forward 2 months.
    I have a weird problem where iPhoto events start going dark. The database had these previously imported files listed, but the files themselves were nowhere to be found! The event in iPhoto showed black squares where the images used to be, but even looking in finder... No pics!
    I want to go back into my old (saved) HD that I pulled from my Time Capsule. I stuck it in an external USB enclosure, and hooked it up. I told Time Machine to use it as the backup, but after it 'verified' it, it didn't show me the archived files. It does show a 'sparse bundle' in finder, which I understand is similar to a disk image. So is there a way to convert the sparse bundle to a disk image? Do I need to plug my old TC HD back into the TC to get to that archive?
    Help! Among the lost photos are ones from a trip to Australia and my grandmother's memorial service. I need to get these back!
    Thank you in advance.

    tgilk wrote:
    I've already done the TC surgery once before and the hardest thing was loosening the adhesive on the rubber pad / gasket on the bottom of the unit. After that, I completed the HD replacement in about 15 minutes... piece of cake. There's actually a good tutorial on AppleFritter. But I digress...
    It's not too much of a digression. Remember that if you are just firing up the Time Capsule with the old hard drive, you don't have to reassemble it. Just swap out the plugs from the old drive to the new and turn it on. A true PC geek never runs with the cover on.
    However, messing around with adhesives and thermal paste introduces a new element of risk. If you know the dates that have good data, and you are comfortable merging the newer photos back in, accessing the data via the Finder on an external enclosure would be faster and safer.
    So, can I turn the TM backups off and still enter 'TM' to browse through the backups on the drive? I've ID'd the specific dates of my missing photo events, so as long as I can get into the backup, I will know just what folders to search for in the 'Originals' folders in the backup.
    Yes. That is probably one of the most important and least known tips about Time Machine. You can still use it even if the backups are turned off. Furthermore, if you ever start to have problems on your machine, you should turn off Time Machine to avoid further corruption of your backups.

  • Disk Image Mounter won't open an .iso file

    I have a problem that neither Unarchiver  (though set up to open files with this extension) nor built-in DIM  aren't able to open the file I've downloaded. What the problem could cause this and is it possible to resolve it?
    I'd gladly wait for your replies,
    thank you

    Do you get any error messages?
    Perhaps the disk image is damaged or is not a correctly formatted .iso? Redownloading should resolve any corruption (assuming the original is intact). Is this an image from the net or something you created?
    Disk Utility (DU) will also mount disk images, so open /Applications/Utilities/Disk Utility drag the .iso to the lefthand sidebar & you can then select the option to mount and perform other tasks (like verify or repair where appropriate). Just right click the image in the sidebar to see more options (or ctrl+click).
    See if that gives you any error messages.
    'DU' will use the same framework as 'DIM' so it may give the same result, but you may get better feedback on error.
    Be aware that large images can take a considerable amount of time to verify the filesystem before mounting and it's possible for that 'skip verify' dialog to be out of sight - it looks like nothing is happening when eventually it will mount

  • Iso disk image file

    I have a 7.38 gb music iso disk image file that I wish to burn to a DVD disc. would I have to burn two DVDs or would I be able to compress this file to fit a single DVD disc? any mac wizards out there?

    you can try this software, it doesn't work on Lion though:
    http://photography.sergeant.org/dvdspanner/

  • Burn disk image with a pc

    Hi, I would like to know, if it is possible to burn a idvd disk image with a pc.
    (I want to get a macbook, and since I already own a pc with a dvd-burner I think it would be best to save the 200 $ and just get the cheapest model. I still want to be able to burn a few iDVD Projekts so the question is, what kind of format iDvD saves the images in - iso or some fancy mac format?)

    link to CONVERT AND BURN MAC .DMG OR .IMG FILES TO .ISO WINDOWS PC-COMPATIBLE DISK IMAGES: ...
    helpful?

  • Disk Utility not copying all files when making disk image

    My OS is 10.6.5 and everything is up to date.
    I have a dvd that was burned for me of a play my child was in. It was probably burned on a PC using out of date software for all I know. But it plays in a DVD player and also in DVD player on my Macbook.
    I want to be able to share clips of it online with friends, and that has all been just fine importing from the disk image I created of the DVD using Disk Utility, using IMovie 09 to edit it.
    HOWEVER when I got to the end of act one, chapter 7 in the DVD is only about 3 minutes in length. The disk image I created using Disk Utility does NOT include any chapter 7 (which happens to be the ending of Act 1) and so I cannot import it into I Movie in order to add it to my mp4.
    When I explore the DVD itself with my macbook, it only lists twelve files (various BUP's and IFO's and VOB's etc) -- here they are sorted by file name
    VTS022.VOB
    VTS021.VOB
    VTS020.IFO
    VTS020.BUP
    VTS013.VOB
    VTS012.VOB
    VTS011.VOB
    VTS010.IFO
    VTS010.BUP
    VIDEO_TS.VOB
    VIDEO_TS.IFO
    VIDEO_TS.BUP
    Now, when my husband took the disc and created a .dvdmedia file in it and I explore that, there are 14 files. All of the same 12 files plus two more. (The DVD itself has 13 chapters but the main menu doesn't allow you to select them.)
    the other two files in the .dvdmedia package are
    VTS020.VOB
    VTS010.VOB
    But I can't do anything with that .dvdmedia file except watch it.
    So I'm trying to figure out how to at least grab even just that last 3 minutes from Act 1 either from the original disc or from the dvdmedia file, using Imovie. So far having no luck. Disk Utility leaves it out and it's my only bridge from a burned DVD to Imovie. I've tried creating a DVD master and also an ISO using DVDRipper and that does the same thing. Also if I open the original burned DVD with Finder it only shows me the 12 files not the 14 that show up when using DVD Ripper to create a dvdmedia file.

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • Using disk images for learning games?

    Hello, I've 2 g3 imacs running 9.2.2, and they are for the grandkids to use learning games on.
    The kids are very hard on the software disks. When I found out about disk images I made them up, now to install them properly. The games are installed, but where to store the disk images? The desk top icons for the games will work after the disk images have been double clicked and the mounted disk image appears on the desktop, but when the imacs are turned off the mounted disk image is lost. How or where does one put the disk images in a safe place so the kids don't get at them, and the disks are mounted every time, without actually starting, when the Mac is started? Start up menu?
    I'm planning on multiple accounts with them having a standard account with game privileges so they don't mess the whole thing up. If their accounts get too messed up for me to repair I figured on maybe deleting the account and opening up a new one? Any Ideas are very welcome.
    Thank you,
    EZ

    Hi, EZ -
    You're quite welcome.
    I had a thought with regard to the disk image files. Are they in a .smi format, or are they in a .img format?
    The .img format requires the assistance of the Disk Copy utility in order to mount the image. This is the standard format generated by the user version of Disk Copy. It requires that Disk Copy be available to Finder to act as a helper app in order to mount the image.
    The .smi format does not - .smi stands for Self-Mounting Image. The user version of Disk Copy can not make this format; but I have seen a utility to convert .img format to .smi format. The slight advantage with this format is that Disk Copy does not need to be available to Finder.
    In both cases the default is to run a checksum verification before the image is finally mounted. The delay caused by this verification can be inconvenient - verification is intended to confirm the integrity of the image after it has been copied, transported, or downloaded, but is usually not necessary when the image resides on a hard drive.
    The checksum verification for .img file types can be removed. With the image not mounted, open Disk Copy. In Disk Copy's Preferences (Edit menu), uncheck the Verify Checksum item. Save the Preferences window. Then select Convert Image from the Image menu, navigate to the disk imge file from which you want to remove the verifiaction, select it and click the Open button. A new window will appear, similar to a Save As type window. Leave everything in that window untouched (unless you want to change the base name of the file - the extension .img should be left intact) and click the Save button. The image will be mounted, the original disk image file will be deleted, and a new disk image file created. Unfortunately creating the new image file takes quite a while since it is creating a new one, not actually modifying the old one - but it does get rid of the intrusion of the checksum verification requirement.
    I verified on my G4/500 running OS 9.1 that a .img file (one I had made from a game CD years ago) dropped into the Startup Items folder will be mounted automatically at the end of the startup sequence. I also tested with an alias to the .img file, and it, too, worked fine - the disk image was mounted automatically at the conclusion of the startup sequence.
    When you make the alias to the disk image file (the .img one), be sure you are placing it into the Startup Items folder, and not the Startup Items (disabled) folder.
    If you have the machine set to use Simple Finder (which removes Finder's keyboard commands and many menu options for Finder), that may interfere with items in the Startup Items folder being run at startup. Or, it may not - I have not checked that.
    *** Edit ***
    I have verified that the alias to a .img file will mount the disk image even when the machine is booted using Simple Finder.
    Another thought, related to Multiple Users - if you do decide to set up Multiple Users, and the disk images are of type .img, be sure to authorize Disk Copy for each of the accounts for which the disk images are to be mounted. If you have the disk image files in a .smi format, since Finder views that file type as being an application, you would need to authorize each of those disk image files for each account which is to have access to them.

  • Disk Image loses all features but Anime Pop theme

    I completed the iMovie, clicked on iDVD, went through the whole process of customizing, then created a Disk Image on my Desktop as last chance to check content before burning. My Mac reported, two hours later, that a successful Disk Image had been created, as "Outriggers.img." and there it was on my desktop.
    BUT when I tried to review it on iDVD it showed nothing (no movie) but Anime Pop going round and round with drop zones empty, "Play Movie" and "Scene Selection" had no buttons, just the title word "Outriggers" showed that I had been there at all. I closed it.
    I clicked on iMovie to open the project in the usual way.. It would not, "Outriggers" was greyed in both Desktop (where I was storing it) and in Documents.
    I was able to open it on my external storage drive, LaCie Firewire, where I kept getting "Modified Asset Warning" about something I must Update. I did update every time the offer came on. What I saw was my movie with no iDVD opening features. After I gave several instructions to "Quit", the proper opening file came on which gave me the choice to Open a New Project, or an Existing Project. I clicked on Existing Project, I got what looks like a normal result, and I should be able to burn to disk.
    BUT, remember this is happening through the Firewire drive which is only a storage place, and I have not been able to see a preview through the Disk Image. I shall count my blessings and burn the movie, taking a chance that it really will burn properly (not just the incomplete Anime Pop going round and round). But I do not feel comfortable with this. I believe there is an error somewhere that will continue to bug me in future projects.
    Has this happened to anyone else? Up to now, I've been using Final Cut Pro with success, but the new iLife05 is irresistible. I have done two previous projects with no trouble at all.
    My three-year extended warranty just came to a close a week ago, so according to Murphy's Law, this problem I have described to you is right on schedule.
    Steeler.

    BUT when I tried to review it on iDVD it showed nothing (no movie) but Anime Pop going round and round with drop zones empty,
    Read the disk image creation and viewing details. DVD Player for viewing, not iDVD.
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
    b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • Can't delete a logical volume group created from a blank disk image

    Hi all,
    I'm a recent convert from Windows, so do bear with me while I grapple with all the new terminology.
    Basically, here's the problem: I've been trying to create an encrypted drive and have been at it for a few hours now. I ended up with two 'logical volume groups' created from blank disk images, neither of which are password-protected, and one of which I quite stupidly named "hidden folder" and can't rename now. Anyways, I decided to throw it all away and start right from scratch, but now disk utility won't let me delete these two logical volume groups despite me dismounting both devices, trying to trash the containing folder, etc. Some searching about online has gotten me into the belief that there should be an 'erase' tab in the disk utility window which is not showing up when I click on those drives (however, the erase tab does appear when I click on the indented partitions on each drive). Here's a screenshot to give you guys an idea:
    -Here's the disk utility window. The two drives I'm trying to get rid of are "Hidden Folder" and "HD2"
    -Here's what I suppose would be called the 'containing folder' in which both drives reside
    -And finally my setup, just in case it's relevant
    Oh and btw this would be my first post here! How exciting
    Thanks in advance,
    Arthur

    nidra wrote:
    When I right click on it these are the choices: Open; Move to Trash; Get Info; Compress...; Burn ... to disc; Duplicate; Make Alias; Copy ...; Clean Up Selection; Show view options; Label; Folder Actions Setup.
    That is as it should be. If you select "Move to Trash" does it move the folders to the trash? If so, do the following from my previous post:
    tjk wrote:
    1. Open Terminal (in Applications, Utilities).
    2. Copy and paste the following command into the Terminal window (or type it exactly as follows):
    sudo rm -rf ~/.Trash/*
    3. Press Return.
    4. Type in your password when asked (note: you will not see anything being entered as you type your password).
    5. Hit Return.
    6. Wait until the process finishes/the Terminal prompt returns.
    7. Quit Terminal.
    I wonder if I need to do some changes to the rights about doing this action "move to trash"?
    Run Repair Permissions in Disk Utility.
    this is making me very uncomfortable, I know myself to solve any problems I tackle/___sbsstatic___/migration-images/migration-img-not-avail.png Something so simple as this is making me crazy
    I don't know if it would make me any crazier than I am, but I sure wouldn't want a stray folder just hanging around on my desktop either.

  • Can't play Disk Image in DVD Player

    I saved my iDVD project to disk image so I could view the video on my Mac Pro prior to burning the project.
    When I double click the saved disk image icon, the archived file that I made earlier populates on the screen instead of the DVD player opening. That's strange?
    I see an Audio_TS file, Video_TS file, and a DVD-ROM contents files instead of the DVD player. Why isn't the DVD player playing the disk image that I saved?
    I also tried the process in reverse. Trying to open the saved disk image from the DVD Player and the saved disk image is all greyed out not allowing access to view the video.
    Thanks in advance for any assistance.
    Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.9) Mac Pro

    All I want to do is just play the disk image.
    Read through the following for help.
    http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
    http://www.kenstone.net/fcphomepage/image_to_diskstone.html
    Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006
    G4 DP 1.25 GHz 2GB RAM 4 Internal Drives: 860GB   Mac OS X (10.4.9)   2 SuperDrives (SL & DL)

Maybe you are looking for