Convert Window Oracle 10g to Linux Oracle 11g

HI Experts
My current version is Oracle 10g on Window and i want to convert on Oracle 11g on Linux.
What will be the best way to convert it ? can possible to direct convert
or i need to be database migration from window Oracle 10g to Linux Oracle 10g and then covert from Linux Oracle 10g to Linux Oracle 11g.
If the direct conversion is possible then please let me know the way or if u have document then please share it.
I searched lot but i didn't get anything.....
Thanks in advance

What is the expected downtime duration ?
What is the database size ?
For a "small" database with no downtime constraint you could use Data Pump to move data.
For a "large" database with minimum downtime you could use Oracle Streams (with Enterprise Edition) or Golden Gate (separate product: needs new licensing).
You can find detailed migration/upgrade recommendations and scenarios on OTN database upgrade page:
http://www.oracle.com/technetwork/products/upgrade/index.html
Edited by: P. Forstmann on 22 mars 2013 13:03

Similar Messages

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

How to reconfigure Oracle-xe (Oracle 10g for linux)?

Hello!
I found this article (seems useful since I use Mandriva 2010.2):
[http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912|http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912]
I installed Oracle 10g from the file "oracle-xe-univ-10.2.0.1-1.0.i386.rpm".
Then, when run ./oracle-xe start and then ./oracle-xe status I get:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-JUL-2011 23:39:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=%hostname%)(PORT=%port%)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
It does not seem ok to me.
I would love to truy to reconfigure it but if I try the command:
./oracle-xe configure
...I get:
Oracle Database 10g Express Edition is already configured
Does any body know how to reset and reconfigure Oracle 10g for Linux?
Best regards
Fredrik

it seems to be "PLSExtProc" bu default.Nope, the ORACLE_SID is taken from the environment variable when the database is started on a *nix host, windows its set up in the database service. If you want to change the ORACLE_SID, set it. See the environment setup script in OH/bin appropriate for your shell. (OH short for $ORACLE_HOME)
how to create a databaseYou mean tablespace?
what you think about this error message ... read from socketWhat do you think about the error message, its your database. Socket read error can be caused by many things, the ora-NNNN error number can provide some insight. http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/toc.htm

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

Imp dmp file in oracle 10g on linux

i have oracle 10g on linux now i want to imp the dmp file to db.
i put the file in /mnt/erp/file.dmp folder.
i log in as oracle user and ....
and start the imp the file as
imp user/password file=/mnt/erp/file.dmp
but it giver error faile to open the file for read.....
what is the problem.....
is there any privillage issue???????????
helped with full syntax...and steps...

i copy the dmp file in /mnt/erp folder as root user.
i am going to imp it as oracle user.
sir i don't know about dmp group.
i past the error i got..
[oracle@lnxdb erp]$ imp
Import: Release 10.2.0.1.0 - Production on Wed Oct 10 08:09:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: FS_10oct2012
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 -
Production
With the Partitioning, OLAP and Data Mining options
Import file: expdat.dmp > FR_10_10_2012.dmp
IMP-00002: failed to open FR_10_10_2012.dmp for read

How to install oracle 10g on linux 9.0

am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.

Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/

I want to install oracle 10g on linux.

i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx

I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before

Porting from Oracle 10g AS to Oracle 11g Weblogic server

Hi,
I am trying to port J2EE applicatin from Oracle 10g AS to Oracle 11g Weblogic Server. I have jsp files which contains sql code embedded to fetch data from the DB. The components used in this application are Java, JSP, Servlets and Stateless session beans.
I have a commonjar which is used to create DB Connection manager and other common stuff which is present inside web-inf/lib. My application is packaged as an ear and which contains the war and different ejb-project.jar files. When the Stateless bean is trying to call the ConnectionManager class, which is present inside the commonjar inside web-inf/lib, I get InvocationTargetException. When I debugged in Eclipse, I see that that inside ejb the reference ConnectionManager, the variable cannot be resolved. So I guess at runtime, ejb is not able to locate ConnectionManager Class.
I tried to copy this jar to APP-INF/lib and the same jar is present inside web-inf/lib as well. In that case what happens is the jsp fails with the exception ConnectionManager cannot be resolved.
How can I make the ejb work by keeping the commonjar inside web-inf/lib alone.
Any help or suggestions?
Thanks
Raj

The classloader hierarchy in WLS looks like this (arrows denote inheritance direction):
Java bootstrap classloader <- Java CLASSPATH classloader <- WLS $DOMAIN_HOME/lib classloader <- Application (e.g., EAR) classloader <- web app classloader <- single JSP classloader
The Connection Manager is loaded by the web app classloader while the EJBs are loaded by the application classloader so the EJBs have no visibility to the classes loaded by the child (web app) classloader.
The simplest fix might be to move the Connection Manager jar file to the EAR file's APP-INF/lib directory.
One word of caution though, you need to be using WebLogic Server's Data Sources and JDBC connection pooling to make sure that you correct transactional behavior if the application is doing any sort of JTA transaction (regardless of whether the JTA transactions are using XA or not...).
Hope this helps,
Robert

Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?

Hi all,
I am lil bit confuse to decide about my oracle core dba certification.
Please help me to know, as per the present requirements of the business organizations.
***Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?***
Hope u guys answer me earliest.
Thanks & Regards,

Most likely, it doesn't matter too much. I doubt that most employers are terribly concerned with what recent version of Oracle you have a certification on.
That said, if it matters
- What does your organization use? What are their plans to upgrade? If your company still uses 9.2 primarily and has plans to upgrade to 10.2 this year, you're probably better off with a 10g certification. If your company is already running mostly 11.2, you're probably better off with an 11g certification.
- What do most employers in your particular part of the world tend to use? What do job postings in your particular part of the world generally list?
Justin

Loading data by sql loader in oracle 10g on linux

I am trying to load data in Oracle 10g on linux by using sql loader, but getting error
Problem in log showing that field length of SURNAME field is more than table field size.
Following is the error in log file of sql loader
Record 21: Rejected - Error on table TABLE1, column
SURNAME.
ORA-12899: value too large for column SURNAME (actual: 65, maximum: 64)
and it is evident from following controlfile that i am using trim to discard any space then why it is giving an error.
LOAD DATA
TRUNCATE
INTO TABLE TABLE1
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
ID INTEGER EXTERNAL,
OPTION1 CHAR,
REF1 CHAR,
OTHER_REF CHAR,
TITLE "TRIM(:TITLE)",
FORENAME "TRIM(:FORENAME)",
SURNAME "TRIM(:SURNAME)",
JOINT_TITLE "TRIM(:JOINT_TITLE)",
JOINT_FORENAME "TRIM(:JOINT_FORENAME)",
JOINT_SURNAME "TRIM(:JOINT_SURNAME)",
I checked the bad file and count number of characters, they are 64 characters.
When i am inserting individual record from bad file by sql loader, it is loading

Probably your database character set is multi-byte. That is %UTF8 or AL16UTF16%
Post your NLS Database Parameters value
select * from nls_database_parameters;
In General varchar2(65) by default means 65 BYTES unless
you have changed your Defalut NLS_LENGTH_SEMANTICS parameter from BYTE to CHAR.
With best regards
Shan

Problem to install oracle 10g on linux

Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
DÃ©marrage d'Oracle Universal Installer...
VÃ©rification des exigences du programme d'installation...
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure Ã l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.log

Hello,
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Applying security patch to Oracle 10G on Linux

Hello,
I'm new to Oracle DBA world, need to apply security patch to Oracle 10G on Linux server, any tips and notes would be appreciated.
thanks
Sam

Manish,
1. I have to upgrade the database version from 10.2.0.2 to 10.2.0.4 on Linux, Is there any proper documentation which will help me out?Please refer to the following document.
Note: 454750.1 - Oracle Apps Release 12 with Oracle Database 10.2.0 interoperability notes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454750.1
2. What are the types of oracle database patches? what is the proper procedure to apply those kind of patches to Oracle 10g on Linux?
Most of the patches in this upgrade are database patches (which should be applied using opatch). The main upgrade patch (Patch 6810189 - 10.2.0.4 patch set) should be applied using Oracle Universal Installer (runInstaller).
Always follow the steps in the patch README file before applying any patch.
Regards,
Hussein

Oracle 10g R2 vs Oracle 10g;;;Plz Help Me

Hi all;
I'm preparing my first OCA exam ; Oracle Database 10g: Administration I. I 'm doing my preparation basically from 2 books ; Sybex Book OCA-Exam and All-in-One Exam Guide book.
Both books 're based on the first release of Oracle 10g.
My questions 're :
- What's the diffrence between Oracle 10g R2 vs Oracle 10g R1?
- What's New in Oracle 10g R2 (parameters, default parameters values, features...)?
thanks a lot,
Best REgards,
W
Edited by: OracleJavaLinux on Oct 30, 2008 8:01 AM

Well satish has given link for the difference in both the versions. I shall add to this that at this moment of writing,there is not anything which makes the exams depend on the release 2.The sybex books would be good enough but I shall recommend to attend Oracle Univ training for the same.
You can go ahead with the exam by preparing from these books, no issues would be there.
HTH
Aman....

Convert Window Oracle 10g to Linux Oracle 11g

Similar Messages

Maybe you are looking for