Converted C100 files not playing smoothly

My C100 files are jumpy and many times pixelate in Prelude. They play fine in Quicktime. Is there some way to change the default player in Prelude. When I choose this option In preferences, it only allows for Adobe Player. OR does anyone know of the best settings for converting C100 files?

Thanks for posting this question. Firstly I want to confirm with you, does 'C100' refer to Canon EOS C100? Does this issue happen when you connect your camero directly with computer? What is your computer OS (Macintosh or Windows)? Do you use Prelude CC version? Thanks.

Similar Messages

Music not playing smoothly in iTunes

I recently updated my iTunes to the latest version and ever since then my music has been jerking and not playing smoothly. I've checked my computer's performance while iTunes and other applications have been open and all seems normal. I've run the setup file again and chosen "Repair", but nothing has changed.
Any help would be appreciated.

This version of iTunes 12.1:
iTunes 12.1 for Windows (64-bit — for older video cards)
seems to address the playback issues that some users have been reporting with the full 64-bit version (the installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer). The "for older video cards" does not seem to fully define the scope of systems for which this alternative works better.

HELP....AVCHD / MPEG files not playing correctly!

I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively! I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on a standard timeline. Can anyone suggest anything to help please? Much appreciated!

Thanks for your reply, I ran it through Media Info. Here are the results:
Container & general information:
MPEG-PS: 290 Mib 4min22s
1 Video stream: MPEG video
1 Audio stream: AC-3
First Video Stream:
8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
First Audio Stream:
256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
Please let me know where to go from here. Thanks so much!
Date: Fri, 11 Nov 2011 10:50:15 -0700
From: [email protected]
To: [email protected]
Subject: HELP....AVCHD / MPEG files not playing correctly!
    Re: HELP....AVCHD / MPEG files not playing correctly!
    created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Aperture videos not playing smoothly in iMovie 11

My Aperture videos in iMovie are not playing smoothly. They do play fine when they are in a iMovie project, just not when previewing. It is choppy.
Everything was working fine with iPhoto11 and iMovie11.
Any ideas for a solution?

Try trashing the iApps preference file. For instructions, see this post.
https://discussions.apple.com/docs/DOC-4061

HD trailers do not play smooth (looks like a different frame rate)

When ever I download HD trailers they end up not playing smoothly, all other trailers play fine however HD ones do not. Im am using 7.0.4 Have a 17" Power Book G4 1.5 with the 128 graphics card and 1GB or Ram. I have also gone through the system Preferences and changed the connection speed to the manual setting.
17" Power Book G4 1.5 128 graphics 1 GB Ram Mac OS X (10.4.4) Quick Time 7.0.4

http://www.apple.com/quicktime/player/specs.html
A G5 (sometimes with dual processors) is required for HD playback.

Problem converting .mov file to play on ipod

I have a 880x660 pixel .mov file that I would like to convert to play on my nano 3rd gen. When I open the file in Quicktime Pro 7.4.1 (registered) all the edit menu items (save, save as, share, export...) are grayed out. How can I convert this file to play on my ipod?

Compressor 3 and later will create MPEG-2 Program Stream files.
-DH

Exported flash movie is not playing smoothly

I have exported my flash project into swf format
it is not playing smoothly
Even in the test movie also it is coming like that
I have increased the frame rate to 120fps even it is coming like that
any suggestions????????
thanks in advance

Sir
In my project I have used plenty of motion tweens
actually my project is DEMONSTRATION OF IGCC (Integrated Gasification Combined Cycle) USING FLASH
I have to make effect of fluid flowing through pipe
for that I used many layers, masking, motion tweens (nearly 700 layers I used)
As increasing the number of layers in test movie as well as exported swf playing slowly
It is very slow such that my project is not effective to see
plzz help me in this
I will be very thankful to you

Why do certain .mpg files not play in Quicktime?

....and will these files play on a IPod Video? The files that this has happened to have had .mpg file extensions and the message I get is that it is not a file Quicktime can understand.

They may be mpeg-2, which sometimes has the .mpg extension. Try this freeware viewer: VLC
I am pretty sure mpeg-2 will not play on the iPod and for that matter I don't believe mpeg-1 will play on it either.
You can try converting mpegs to iPod with this freeware, although it does require the Apple mpeg2 component if the mpeg is mpeg2. Mpeg StreamClip

Converting MOD files to play on iPod?

I'm not sure what programs I can use to convert .mod movie files to play on my iPod. Is iTunes capable of doing .mod files? I've also had a history of trying to convert other files using iTunes and not getting the files to transfer to the iPod properly, although I will try again if iTunes will convert the file.
Windows XP Pro

I have never been able to get Handbrake to recognize many file formats, at least not the version that runs on Tiger.
MPEGStreamclip; you need to export the file. I don't have an ipod so I don't know what format.
My feeling is that you might get more concrete assistance if you asked this on an ipod forum. At least there everybody will likely own one. On the other hand they may therefore also be able to afford the newest computers and tell you to run something on a newer OS.

M4p files not playing audio on iPod

Recently I have tried to convert mpeg files so that I may play them on my iPod video. It really has not worked out for me though. I am using quicktime pro to convert the video but as soon as I put the video on my iPod there is no sound. I am using all the updated versions on iTunes and Quicktime but the problem is not going away. Can anybody help? Thank you.

Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Film not playing smoothly on quicktime!

Hello,
I am hoping someone can help me as i am out of ideas of how to solve my problem!
I have exported a film it is 2 mins long with the first min being a slide show of photos with tilts and pans. When i first exported it the first minute when played on quicktime were jumping. Not at the same point but at random times. I downsized the photos on photoshop and this helped it but they still are not perfect. The rest of the film was playing fine. I then decided it might help if i export the photos as a separate film and then reimport it. Again this helped but they are still not playing perfectly on quicktime for some reason. Any ideas for what i could do? I have put the res down too much already so i cant down size them anymore.
Now when i play the video on quicktime the last half of the film is jumping in the same way as the photos were. I have tried it on VLC player and it works fine but it has to be played on quicktime for a client so i really need this to work on quicktime. I have tried exporting it as many different formats and reducing the bit rate but still the same thing is happening.
I really need some sort of clue to what is going on and how to solve this problem as i am out of knowledge and ideas!
the info on the latest export of the film:
QuickTime movie
Size: 153 MB on disk (152,965,033 bytes)
1920 × 1080
H.264, AAC, Timecode
Audio channels: 2
total bit rate: 8,492
Thank you!!!

I am not sure I understand everything you asked me but let me try my best to answer your questions.
Basically I was attempting to point out that different encoding strategies and software applications could affect your workflow in different ways. For instance, your used the term "slideshow" which could either be the sequential display of a single JPEG fr
I am using premiere pro to create the slideshow. I import the jpeg then i add motion via the effects tab by key framing. These jpegs go into the same sequence settings as i listed above and are exported as a .MOV in the H264 Codec bit rate is 8,223 and 25 FPS .
Yeah when I exported the slide show as a film and then reimported it into the sequence it was a .MOV with the above properties.
I used quick time 10 to play the film. I also have version 7 but i want it to play on the 10 as this is the version my client has.
That is a good idea but i still have the same problem with both films played separately. It is difficult to determine what is causing it as it is unpredictable where it jumps and for how long for.
ame for a specific period on a single track, the interspersed display of such JPEG photos on two different tracks on an alternating basis with or without a 'tweening track to apply transitions between the display of alternating track photos, or the display of such photos in a single track which has been encoded as "video" content containing multiple frames per unit of time.
My sequence settings are as follows:
Editing mode: DSLR, 25FPS, 1080X 1920, Codec: MPEG I FRAME.
The software I am editing on is Premiere Pro CS6.
The photos are JPEGS and the films are .MOV, 1080 x1920 at 25 FPS.
Not a Premier user, so your settings (DSLR and MPEG I FRAME) are somewhat confusing to me.
The JPEGS started out as roughly 3,000 pixels large and 300 dpi. This made the video jump a lot. So i took them into photoshop and reduced the pixel dimensions to the closest possible i could to the 1920x 1080 format my film is to be in. I cant remember what each indiviual JPEG was as they were all different but roughly speaking I set them to around 1500 - 2000 pixels and 72 dpi. This certainly helped the jumping but didn't stop it all together.
The slide show has no text. It is old black and white photographs from the 1920's . I should also say that when i reduced the distance that the pans and tilts has to travel this helped the jumping. it seems to be where there is movment over the still images the film jumps in quicktime.
I am using premiere pro to create the slideshow. I import the jpeg then i add motion via the effects tab by key framing. These jpegs go into the same sequence settings as i listed above and are exported as a .MOV in the H264 Codec bit rate is 8,223 and 25 FPS .
Yeah when I exported the slide show as a film and then reimported it into the sequence it was a .MOV with the above properties.
I used quick time 10 to play the film. I also have version 7 but i want it to play on the 10 as this is the version my client has.
Thanks for the clarifications.
If you are changing both dimensions and the resolution reference in Photoshop, then it sounds like you are doing everything correctly here. However, am not sure about your use of the term "key framing." Are you referring to the use of "key" frames to initiate/modify motion effects or the use of "key frames" to insert additional I-frames to improve the rendering of motion effects? The use of an excessive number of I-frames can change the allocation of data between intra- and inter-frames if the target data rate is left unchanged—sort of a "rob Peter to pay Paul" situation. E.g., if too much data is "borrowed" from the "difference" frames, then the motion transitions may cause playback to become jerky in the same way that "dropped frames" during playback would. In this case, you may wish to try an increase in the target data rate for the file to see if it provides a smoother rendering during photo "slideshow" playback. (Am assuming here that your MPEG-4 AVC exports are a minimum Main Profile @ Level 3.1 allowing data rates up to 14 Mbps in which case I would likely try a target setting of about 10 Mbps for testing.)
That is a good idea but i still have the same problem with both films played separately. It is difficult to determine what is causing it as it is unpredictable where it jumps and for how long for.
Suggestion was to test whether the problem was caused by sourced content encoding or the process of "merging" the different types of content. Recommend you reprocess the photos in Photoshop at 72 dpi reference (if not already doing so) to appropriate resolutions and then reprocess the results in Premier to see what happens.
You mentioned VFR- is there a setting i should be aware of for this- can you explain this to me in a bit more depth what is that? I thought the FR is set to 25 and it sticks to 25 unless i select another frame rate?
you mentioned at the end of your reply that it could be data rates or frame rate issues- what would you suggest to solve this problem?
Not familiar with settings available in Premier. Was referring to the use of VFR strategy to eliminate duplicate frames. I.e., if you were exporting photos as stationary "slideshows" rather than using motion effects like Ken Burns, then the elimination of duplicate frames might reduce the data rate requirements associated with "slideshow" exports in "video" compression formats. QT is programmed to skip frames if it is unable to keep up with data throughput—which is most frequently the primary source of jerky playback.

Why does the audio in my .SWF file not play in a Browser?

I created an .swf file using ffmpeg, containing H.264 video and MP3 audio. The file plays perfectly in VLC but not in a Browser (Chrome/IE). I tried analyzing the file using a trial version of Flash decompiler. Again, only the video plays. The strange thing is that if I extract the MP3 from the file, it plays perfectly using any of th eplayers. It seems to be a muxing issue which VLC apparently handles, but not the player in the browser! Why? Thanks for any pointers.

Yeah. Sorry to say this but many people buy the various brands of format converters, which are everywhere on the Web and which also spam these boards – and often find they are not only out the purchase price but that the app created as many problems as it solved.
Russ

Swf file not playing in browser

I have a problem with a swf file which will not play in web browser.
It played fine until I updated my site. I therefore suspected a pathing issue within dreamweaver and looked thorugh that forum for an answer.
I tried typing the absolute path to the swf file in the browser address bar and found it straight away. When I clicked on it the screen stayed blank.
I checked the path to the file and the flv file was relative to the document and not the site.
swf plays fine in flash player, flash, and locally on dreamweaver.
I moved the swf up the file tree and changed the links accordingly but still would not play.
I also tried saving it as a new swf from flash, but that doesn't play either.
I added another swf to the containing folder and that played fine in the browser.
When I open the fla file in flash it only shows a flv playback movie, not the elements, I think this is because it was created in after effects.
Here is the link to the containing folder, the swf file is Home_page_movie_V2.swf
http://www.joinerycadsolutions.com/Flash/01 Home
I have other swf files playing fine and this swf played ok originally so I still think it's a pathing problem but I am not that savvy on flash and cannot figure it out.
Any help would be greatly appreciated, just bear in mind my low level of ability.
Thanks
Stuart

The .swf is loading just fine... but it is expecting to load a .flv video file.
The path inside the .swf to the .flv file is not correct. The path inside the .swf to the .flv file needs to be relative to the .swf as it's located on the Web page, NOT the physical location of the .swf.
Here is the absolute address of the .flv:
http://www.joinerycadsolutions.com/Flash/01%20Home/Home%20V1.flv
Here is a test player using that address:
http://www.cidigitalmedia.com/tutorials/flash/cidm_simple_vid_player.html
So unless your .swf is broken, it just a pathing issue.
From an old post:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
Best wishes,
Adninjastrator

Protected AAC music/files not playing or appearing in iTunes purchases

Any purchases which I made from itunes during 2007/08 which were protected AAC files will no longer play on my pc (nor download to my ipod). I get multiple 'This computer is not authorised to play....Would you like to authorise it?' When I authorise it, it tells me that 'This computer is already authorised (2 out of 5)'. But the track will not play and again asks for authorisation. The tracks that will not play are all 'Fairplay version 2'. I thought about deleting them and downloading them again as I understand that Apple no longer encripts files, but they do not appear in my previous purchases in my itunes account (no purchases before 2011 appear?) - so I assume that I cannot download them again. So i have the tracks in my library, the 'info' says that they are registered to my itunes account, but it seems that because they are encripted I cannot play them. Help please!!

I am having what seems to be the same problem as Julie described. After purchasing an album on itunes, I created a CD-R disk that will play on the computer but not on any of several players I tried. The CD shows (Get info) each tune to be an MP-4. In ITunes...the tracks are shown as AAC protected...I don't know the difference.
It appears Julie solved the problem by your suggestion to go to iTunes preferences...I tried that Pref>Advanced>Burning>and selected Audio CD and burned a second disk....actually I didn't change anything because my preferences were already set that way.
I would never buy anything else from iTunes that I cannot play on my home system. this has been a frustrating matter and I guess what I am asking is there a pausible solution?
To your questions:
Play on home CD player: message: No audio...although the Cd plays on the computer ok.
Media used: Memorex CD-R
Brand of players: Sony DVD player 1.5 years old & Cyberhome 1 year
Operating System 10.3.9
iTunes 5.xx
Any comments or suggestions would be appreciated.
thanks,
ron

Local files not playing on Windows 8

If you've installed Windows 8 on your computer instead of the previous Windows 7, you may experience an issue where none of your local files will play.
First try reinstalling Spotify, installing Quicktime, deleting all the Local files and unchecking everything in Preferences related to Local Files. Finally, make sure the files are a supported file format.
We've also noticed that installing the Windows Media feature pack helped many users where the above suggestions did not. You can find the feature pack here:
http://support.microsoft.com/kb/2835517

Hi,
If all you're missing is the required codec, there are plenty of free software offerings that will allow you to play DVDs - one example would be the application on the link below.
http://www.videolan.org/index.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Converted C100 files not playing smoothly

Similar Messages

Maybe you are looking for