Converted CP3 projects will not publish correctly in CP4

We recently started using CP4 and have no problems with projects created in CP4. However, we are experiencing problems with CP3 Projects which are converted to CP4.
When we publish to SCORM 1.2, we do not get a zip file though it is selected. We get only 4 files created - the main htm file, the full screen htm, the swf and the standard.js. I have checked and rchecked our settings and can find nothing amiss.
I have searched all over and can find nothing referring to this problem.
Has anybody run across this problem? We would Really appreciate any help with this.
Thanks,
Ron

You may want to search the forum for other posts related to the manifest and such SCORM files not being published. I've not seen the published results not be .zipped when they're selected to be, so that's odd, but it may be related to the same manifest/SCORM issue (SCORM settings not correct so .zip file setting ignored?).
First, try unchecking the .zip option, Save As a new file, open the new file, check the .zip option, publish.
Second, you must have scored interactions in the CP lesson for the SCORM items to be published. Check your Advanced Interaction panel. Are there scored interactions listed?
Third, you have all the proper settings in the Publish > Quiz section? SCORM and such choices?
If everything exists as it should, two other options I can think of:
1. Try to copy all slides out of the lesson and paste them into a new, blank one. That may help reset whatever problems CP is having.
2. Search these boards, or await someone else, for some preferences or such file that can be deleted. I don't recall specifics but there's some file that holds various CP settings that seems to get corrupted...
HTH
Erik

Similar Messages

My Project will not Publish

I was working with Captivate v.1 and upgraded to v. 4. Now I can publish some projects but others will not. When I click the Publish button nothing happens. I do not get an error message. I have tried changing folders, and names and tried to publish as an .exe file and a .swf file and still nothing.
I am currently working on 3 projects with this problem and a deadline looming. I REALLY don't want to trash them and start over.
Help!

Hi there
You might try the following:
1. Turn off compression - Sometimes that will help.
2. If that doesn't work, try closing Captivate and performing a search and destroy of the settings file.
?:\Documents and Settings\??\Application Data\Adobe\Adobe Captivate\captivate_v40.dat
?=Drive letter
??=Your logged in user name
Rename or delete the file and restart Captivate.
3. If all else fails, try creating a new blank project sized identically to the original. Then copy all the slides from the original and paste into the new. Then try to publish.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

After installig Tiger iCal will not Publish correctly.

After installing Mac OSX v 4.0 Tiger, when I publish a calandar, the URL given says: We're sorry but we cannot find the iCal you've requested.
It's possible that it has been deleted or renamed. However, this it untrue as it is a new calendar I have just created. Please Help!!

Hi Paul,
there is no way to look up icons in an index,
There is. From iCal in the Help menu choose iCal Help. enter icon in iCal Help's search box and look at Understanding symbols in iCal. Is the symbol there? I think you'll find it's a "broadcast icon" - if so iCal thinks it is already publishing the calendar.
If you want to update the remote version of this calendar. In iCal in the Calendar menu select Refresh All. You could also set "auto-publish" on the calendar to automatically refresh the calendar after each change you make. In iCal Help search for refresh for more info about refreshing published calendars.
If the remote calendar is still not refreshing you may want to unpublish and then re-publish your calendar.
I hope this helps.
Best wishes
John M

Projects first created in Windows are now not publishing correctly from a Mac

I've been using the Windows version of Captivate for months without issues, putting together a large number of HTML5 courses, non-responsive. Lots of custom javascript via the 'Execute JavaScript' action for smartshapes, etc.
I just purchased a new Macbook Pro and then purchased a subscription license for Captivate. Now my cptx files that were working fine when opened and published from Windows Cp are very not publishing correctly - the javascript does not execute, etc. Everything *appears* fine within Captivate but I get issues upon preview/publish.
Thank goodness I have the 30 days to cancel the subscription and get a refund...but before I do that - has anyone else tried switching to a Mac and run into problems with Captivate projects?
Both machines have 8.01 installed. The only thing I can think of is, after installing 8.0 via the subscription download, I then did the 'Check for updates' and it went and downloaded and installed the 8.01 update. When I did this on Windows I followed the directions on a blog post somewhere (sorry - I forget the name!) that stressed deleting some directories on the machine first before running the update. I assumed the subscription files would be fixed/patched....

After struggling with this last night I took a look again this morning and narrowed down and corrected the problem. Basically, this is what happened to cause the issue and how I resolved it. Hopefully it helps others in the future.
Steps
Create project in Windows version of Cp (I was using version 8.01).
For my client's requirements, which are quite unique and complex compared to the typical Cp project, custom quiz questions/scoring had to be developed. Since these are HTML5 (non-responsive) courses, and Javascript is the fastest/most efficient way to do this, I used Javascript extensively for quizzes via the 'Execute Javascript' action. So for quiz questions, each answer is simply a smartshape (transparent, with answer text in it) that triggers the 'Execute Javascript' on click. In addition, on many of the quiz slides there are Edge Animate/HTML5 interactions embedded.
Worked fine on windows upon publish. But when I opened on a new Mac and published, when a question answer was clicked nothing would happen.
Turns out the problem seems to be with the text in the Javascript window. I think it somehow gets corrupted, though it looks fine. I had to literally delete the javascript, save it, and then copy it back in. Once I did that, it works.
I've invested too much time in this project so far, so don't want to risk any more major issues popping up like this, so I switched back to Windows and canceled my subscription this morning. Fortunately I have a license from my employer for Windows and will just use that with Boot Camp.

Components will not resize correctly in Catalyst

Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
Ex. State 1:
Animation/Action Sequence to the following:
The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
and this when stretched out:
When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
Any guidance?
Message was edited by: joshlev

Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache since I could not see it on several computers that I had never pulled the site up on before.
And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
Thanks for all your help!
Liz

IWeb 09 will not publish

I just upgraded from iWeb 1.1.2 to iWeb 09. I then made a number of changes to my website. I have attempted to publish the site dozens of times since I made the changes. The site will not publish. The publishing process seems to be correct. I get the "site has been published message, but when I visit the site the changes are not there.
Has anyone out there had this problem?
Thanks,
Jack

Versions of iWeb previous to '08 use a domain.sites file and published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb.
iWeb '08 converted the file format to domain.sites2 which was not successful for a lot of us. I ended up rebuilding all my sites. This version also dropped the iWeb folder on your iDisk and publishes to Finder/Go/iDisk/My iDisk/Web/Sites as does iWeb '09.
Also .Mac was changed to MobileMe for some reason.
You will note these differences in the two URLs.
I have never tried to convert a site made in '06 to '09 without going through '08.
As I pointed out, the conversion is not perfect and you should deleted and redo the sections that don't publish correctly.
If I was in your situation, I would start afresh on a new, blank domain file and copy the content that you want to keep over from the published version of your old site to the new domain file..

Any version of Flash (cs3-cs5) will not publish my file..

Hi all,
this is the first time i encounter this problem.. I had the problem where a file would not open correctly which was also addressed at this forum. But this one is different. this file was created (from what i remember) in Flash 8, then opened/saved in all possible flash versions for updates in time.
While it will open just fine, it will not publish. The publish window with the percentage will open up for a split second, then it will close with no messages whatsoever, no actionscript errors, nothing. F12, the same thing again. No possible settings could solve this. I am willing to send the file for testing of course, have tried to publish using Flash cs4 and Flash cs5. I thought of going back to Flash 8 by opening the file and saving to a previous version but as soon as i open the file in Flash cs3 (while the file has been saved as cs3) it will not open the file with an error message that i cannot remember right now.
So the problem might lie in how Flash cs3 saved the file, but it will open just fine in cs4 and cs5 so the file is not corrupt in any means..
any ideas?
George
p.s. I tried deleting EVERYTHING off the stage and the library and yet it wont publish.. tried copying all frames on another empty file, couldnt publish either...

Hi,
Try using different machine

Particular mobile project will not open view mxml, run is blank

I use Flash Builder 4.6 with Air 3.6 updated adb for use with Android 4.2.2. When trying to use a develop a particular application, I encounter all manner of problems. The project contains only one mobile view, and the view will not open correctly in Flash Builder; I get an icon that the application is working, but it keeps spinning for at least 60 minutes. The project no longer runs; it just gives a blank screen.
I have all of this under revision control, and I have run the present code before, though I am not sure with what version of Air. I have tried deleting the files and reimporting them from revision control. I have deleted and reimported the project. I have killed and restarted Flash Builder and rebooted the machine.
I have submitted to get an upgrade of Flash Builder 4.7, but this is highly frustrating. I have no idea where these problems are coming from, and it's very disturbing that Flash Builder won't even open a view (which is just a text file) in the editor. Ideas?

I've upgraded to Flash Builder 4.7, and I can now work all of this out. Having a functioning editor has allowed me to find the other problems.

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

HT1349 itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario

ITunes will not install correctly on my PC with Windows 8. Any hints?

iTunes will not install correctly on my PC with Windows 8. Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates

I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. please help

I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. it stays on the opening screen and the message
shows up that I must update the mediathek. If I click on update the program shuts down. How can I fix this?

I downloaded the new iphoto and the upgrade
Does that mean, you are running iPhoto 9.6 on MacOS X 10.10.1 Yosemite? Or are you using an older MacOS X? "New" iPhoto is relative and depends on your system.
If I click on update the program shuts down. How can I fix this?
Does "shut down" mean it crashes? Then post please the error log from the error panel here - copy and paste the report into your next answer (the first 50 lines should suffice)
Where is your iPhoto Library (Mediathek) stored? Have you moved it to an external drive, or is it still in your Pictures folder (the order "Bilder")?

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Webpages will not load correctly on any browser

Hey all,
About 3 weeks ago I took the leap and upgraded my works PC from Windows 8 to 8.1 (as a test before doing the rest). Unfortunately since this time I've been continually encountering a major issue.
This issue is that webpages will not load correctly (about half the time). Since the day I upgraded I've had issues with this, across all browsers. Sometime a webpage will load, sometimes it'll partially load and sometimes it seems to have loaded but actually
hasn't (I.e. none of the links/inputs work). If I have an issue on a page, the only way I can get it to load is to click the stop button, navigate away from the page and then navigate back.
I've tries assessing the problem with Firebug and it seems that the HTTP transfer is being cut-off at a certain point (which is non-consistent). The webpage is then stuck in a state of 'Transferring data' and will never finish loading.
I've been looking around for answers and have come across some suggested solutions like running the All In One fix from tweaking.com, or flushing the DNS cache every few hours, but nothing is working.
Has anyone any suggestions for how I could fix (or even further troubleshoot) this problem?
Thanks
David

Please try a clean boot.
http://support.microsoft.com/kb/929135
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to open my iphoto?

My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to fix this? I would like to be able to see my photos again.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Converted CP3 projects will not publish correctly in CP4

Similar Messages

Maybe you are looking for