Converted entries not in unique XLS cells

When converting a PDF to an XLS some entries are grouped together in a single cell making it difficult to perform calculations.  Can this be avoided?

Hi James,
I'd like to assist!
Was the PDF an Excel doc originally? Has this happened with other conversions you have done?
Try this: OCR
Let me know how that goes!
Kind regards, Stacy

Similar Messages

  • IDoc error "customer  and sales area : GR could not be uniquely determined"

    Hi All,
    While posting some IDocs i am getting error customer  and sales area : GR could not be uniquely determined even when entries are available in EDSDC table.
    Please assist.

    Double check your entries. Once I ended up even sending a message to SAP and turned out there was a simple typo in the table.
    Also since you're saying "some IDocs" - check how exactly they are different from those that don't have this error.

  • [-9046]: System error: BD No converter entry

    Hi,
    when i try to execute
    delete person where oid = 'AAAAAZAT'
    i get the message
    : System error: BD No converter entry
    this table, have many references back, all foreign keys are DELETE CASCADE, i executed many deletes for other tables, and all works, i disabled the redo log, too, any idea?
    thanks
    Clóvis

    Hi Melanie,
    I checked the database, and dont have any problem, but i think that i discover the problem, think something like having a table:
    CREATE TABLE Person (
        oid VARCHAR(8) NOT NULL,
        my_Parent VARCHAR(8),
        primary key (oid)
    ALTER TABLE Person ADD FOREIGN KEY my_Parent REFERENCES Person(oid) ON DELETE CASCADE
    Then if i delete a person that can cascade delete many rows from other tables and the same table, and that maybe overflow the system, then the error occurs, if i just set my_Parent to null where my_Parent is equals the Person to be deleted, the commands works well.
    best regards
    Clóvis

  • PI entry not reverse after canceled GR

    Hi Expert,
    User Post the GRN, Part I entry get generated. But when reverse the GRN part I entry not updated.
    Please give the suggecton how to configure.
    Regards
    BK GAIKWAD
    M9881908615

    Post this query in ERP - Logistics Materials Management (MM) and you can expect a faster response, as it is related to MM Module.
    Please do not mention your cell number in the Thread. Please edit all your Threads immediately.
    Regards,
    Rajesh Banka
    Edited by: Rajesh Banka on Dec 17, 2009 1:29 PM
    Edited by: Rajesh Banka on Dec 17, 2009 1:31 PM

  • Do Not Check Uniqueness of Data in Write Optimised DSO

    Hello,
    I am working with write optimised DSO with already billion records in it. I have flag 'Do Not Check Uniqueness of Data' in Settings as checked(means it will surely not check for uniqueness of data). I am thinking of removing this flag off and activate the DSO again. I am willing to remove this flag as it will provide option of Req ID input in listcube on DSO and without this list cube will never return back with results.(I have to analyze aggregations)
    I tried removing this flag and then activate DSO in production system with 17 million records which took 5 mins for activation (index creation). So maths says for a billion records activation transport will take around 6 hrs for moving to Production.
    I am willing to remove this flag as it will provide option of Req ID input in listcube and without this list cube will never return back with results.
    Questions:
    How does this flag checks the uniqueness of record? WIll it check Active table or from the Index?
    To what extent DTP will slow down the process of subsequent data load?
    Any other factors/risks/precautions to be taken?
    Let me know if questions are not clea or further inputs are required from my side.
    Thanks.
    Agasti

    Hi,
    Please go through the site :
    /people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
    As far as your ques are concerned... i hope above blog will answer most of it , and if it does'nt please read below mentioned thread.
    Use of setting "Do Not Check Uniqueness of Data" for Write Optimized DSO
    Regards
    Raj

  • Can we control if text in a page is converted, or not, to an image?

    Hello!
    My experience tells me that if I use iWeb 1.0.1 and I put the text color with 80% opacity, for example, all text will be converted to an image. Most of the times I like this behavior, because the result is the same on every computer or browser.
    But after I update for iWeb 1.1.1 all text appears as text and no longer as images. Now, when I want some sites with the text converted to images I still use the older version (1.0.1).
    My question is: Can we control if text is converted, or not, to an image? Can we force a particular text box to be converted to an image, after 1.0.1?
    I search the iWeb forum and I have not find any answer for this particular question.
    Sorry for my english...
    Thanks!
    Power Mac G4 - 867MHz   Mac OS X (10.3.9)  

    Now answering newmacguru...
    1. Why I want text to appear as an image?
    Sometimes the graphical result is important. Most of the times, if you use a white or bright page background, what you see in iWeb is almost the same you see when browsing the page. No problem! But if the page background is black or dark, what you see when browsing the page can be different from what you see when developing the page with iWeb. And these differences can be important... Now if you tell iWeb to convert text to images, the result will be exactly the same you see in iWeb (the result you want).
    Let me show you an example. This page was published with iWeb 1.0.1. In this case all text boxes were converted to images and the result you see is exactly what I want. Normally I choose opacity of 80% in the text color to reduce the contrast between text and background (this is the graphical result I most like):
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto101/
    Now if you publish the page with iWeb 1.1.1/1.1.2 the result is the same for both, but different from the pages obtained with iWeb 1.0.1. I only get the result I want if the text is converted to an image (using shadow). You can also see that with a white background you get good results even if the text remains text:
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto111/
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto112/
    Thanks for the suggestion of the shadow. Sometimes using a non web safe font is not a solution, remember I want “that” graphical result...
    2. Now, considering the search engines, I think I read in this forum that the search engines can do is work, even if text is converted to images, because the text still remains in the page (sorry I don’t remember where).
    Sorry for my english...
    Power Mac G4 - 867MHz   Mac OS X (10.3.9)  

  • While "Invoice Cancelling- Accounting entry not effected in Trial balance"

    Dear All,
    Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
    Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
    Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
    I can able to see the Reversal Entry in Payables > Reports > View Accounting A
    Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
    @Have to Resolve this as soon as possilble, plz any one can lets guide me
    Reagrds,
    senthil

    Plz Update this asap.....

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?

    I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?  It seems like we were doing these same types of things with Palm Pilots years ago, one would think this would work with iPads?

    I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

  • Error whil posting FI Document using 'F-28' 'Entry not Possible'

    Hi ,
            When i  trying post FI Dcoument using 'F-28'. As sudden given Posting key and account number i m getting the error "Entry not possible'. Can someone tell what is the reason for this.
    Regards
    Balamurugan N

    Check table TBSL : posting key TBSL-BSCHL give allowed account type TBSL-KOART
    A-nlagen(Asset),
    D-ebitoren(customer),
    K-reditoren(vendor),
    M-aterial,
    S-achkonten (general ledger))
    So, you cannot use a [posting key|http://help.sap.com/saphelp_46c/helpdata/en/96/8b3ee943ce11d189ee0000e81ddfac/frameset.htm] like 40 or 50 for a customer account or a 01 or 11 for a bank or expense/fee account.
    Regards,
    Raymond

  • Planning File Entry not generated for items releveant to PM

    MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
    zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
    But as per the setting of reorder point PR should be initiated.
    When checked the MD21 , material is not flagged ,
    I want to know the specific reason why only  this material is not flagged for MRP run.
    What all settings i can check ?
    MATERIAL TYPE : YMRO   OP Maint/ Repair/OperSup
    Lot size : Repl. to max. stock level after cov. req
    Procurement type   :  F

    Hi,
    Run the reports MDRE & MDAB to ensure the planning file entries are correct.
    About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
    Regards,
    Vivek

  • Create folder in Integration Directory - Can not be uniquely addressed

    Hi experts,
    I have the following issue. When creating a folder in Integration Directory I get a warning info, like the following:
    E.g. folder name should be "test"
    "The folder test could not be uniquely addressed by the path /test/ because two or more folders share the same name"
    I checked the repository for another folder with the same name but without success.
    The point is, that I want to use the API to add objects to the folder. But without a unique address the creation will fail.
    What makes this very strange is, that sometimes it works.
    Is there any place in the repository where folder ids can be checked for uniqueness ?
    Thanks a lot.
    Timo

    Hi Jon
    On the first topic, try this.
    import java.io.File;
    public class MakeDir {
         public static void main(String[] args) {
              if (args.length != 1 || args[0] == null || args[0].trim().length() == 0) {
                   System.out.println("Usage: java MakeDir <folder name>");
                   System.exit(-1);
              File f = new File(System.getProperty("user.dir") + "\\" + args[0]);
              f.mkdir();
    }/John

  • How do i convert a pdf into an xls or csv file

    how do i convert a pdf into an xls or csv file   ? thnx

    HI newapiary
    You can either use Adobe Acrobat or Adobe ExportPDF Online Service.
    Please Refer : https://www.acrobat.com/exportpdf/en_GB/convert-pdf-to-word.html

  • BB Curve 8350 quit email function. Can't load address for email setup..."blank entry not valid" even though info entered

    HELP!!  My BB quit sending/receiving emails 6 weeks ago.  I tried to do the setup again, but error message says "Blank entry not valid" even though the info has been entered (Email & password)   I tried to get help from Sprint but as they aren't supporting BB anymore, they just want me to upgrade. 
    I swapped devices this AM (8350 Black for 8350 Red) and the same issue on this device.  Any assistance is welcome!!!
    Thank you!

    If they cannot resolve your issue ask them to escalate your case to RIM. it is what they are SUPPOSED to do when they cannot resolve a BlackBerry issue. Whoever you have been on the phone with does not know what they are doing.
    This forum is not an official support channel but rather a peer-to-peer support forum community where other users just like yourself help each other out with their BlackBerry device.
    Some things can only be solved by RIM, however, and the only channel to their support is through your carrier.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Custom Table Entry not in Sync between Different Environment

    Hi All,
    we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
    Thanks

    Hello Mohammed,
    It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
    If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
    Table of type 'Transaction Data' by default have different records based on your day to day transactions.
    You cannot have all custom tables with same data in all environments. Hope this helps.
    Rgds,
    Vijay.

Maybe you are looking for