Converted file not readable

Why do I get ASCII type characxters instead of text in the converted file (PDF to word for MAC)

Hi stupidminds,
The quality of a conversion depends greatly on the quality of the PDF that you start with (and not all PDFs are created equally). Do you happen to know what was used to create the PDF?
In any case, you may be able to get a better conversion by disabling OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community
Please let us know how that goes.
Best,
Sara

Similar Messages

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

"File not readable" error in CS6

I've opened the file, worked on the file, saved the file and suddenly I'm getting a "File not readable" error upon open. Running CS6. One file was saved out to CS5 compatible. Created another test file and it saved out and reopened without issue.
Mac Yosemite. Only update done between opening was an Adobe Flash Player, which really shouldn't affect this. I've also tried pulling the file again from my cloud account to see if it was corrupted on my desktop...same issue.
Anyone having this issue and know how to solve for it?

skredberry,
Are you saving to your own harddisk?
It is always recommended here to open/save your documents from/to your own harddisk, then copy to external media/servers/whatever as backup.
You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk.

File not readable

I have been working on my sister in laws wedding imovie project and now when I try and open it, it says file not readable. I can open other saved movies and when i tried to start a new one and saved it, the new one is also saying file not readable. Is there any hope? Can I fix it so I can do a new one?

The project has probably been damaged, usually the result of emptying the iMovie trash. If you'd like me to try to rescue it, see my note here:
http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
If a project is unreadable, it may be (indirectly) affecting your trying to open the new project, causing you to conclude it is unreadable too.
Double-clicking on the iMovie application to launch it — or single-clicking on iMovie in the Dock — normally causes iMovie to open the most recently-opened project. The name of that project is saved in the iMovie preference file.
iMovie may be repeatedly trying to open the corrupt project instead of the new one, creating the (false) impression the new project is corrupt too.
It's also possible iMovie is damaged, but that doesn't usually cause iMovie to complain it can't read a project. It just fails to open.
My guess is the problem is limited to just one project. To find out for sure, double-click on a project you KNOW is okay to open iMovie, create a new project, save it, quit iMovie and re-launch iMovie. If the new project opens, everything is okay, but the corrupt project needs fixing.
Karl

CQ5 Startup errors ESAPI directory or file not readable.

Here is the startup screen output with the errors bolded, any help is appreciated.
:/lopt/dev/instances/author1/crx-quickstart/bin $ 31.05.2013 08:08:32.365 *INFO * [main] Setting sling.home=crx-quickstart (command line)
31.05.2013 08:08:32.371 *INFO * [main] Starting Apache Sling in /lopt/dev/instances/author1/crx-quickstart
31.05.2013 08:08:32.380 *INFO * [main] Checking launcher JAR in folder /lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.380 *INFO * [Apache Sling Control Listener@/127.0.0.1:43654] Apache Sling Control Listener started
31.05.2013 08:08:32.399 *INFO * [main] Existing launcher is up to date, using it: 2.4.1.R1416835 (org.apache.sling.launchpad.base.jar)
31.05.2013 08:08:32.402 *INFO * [main] Loading launcher class org.apache.sling.launchpad.base.app.MainDelegate from org.apache.sling.launchpad.base.jar
31.05.2013 08:08:32.440 *INFO * [main] Setting sling.launchpad=/lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.441 *INFO * [main] Setting sling.home=crx-quickstart
31.05.2013 08:08:32.441 *INFO * [main] Setting org.osgi.service.http.port=4502
31.05.2013 08:08:32.441 *INFO * [main] Starting launcher ...
31.05.2013 08:08:32.442 *INFO * [main] HTTP server port: 4502
RAWProcessor succesfully installed
31.05.2013 08:09:06.608 *INFO * [main] Startup completed
Attempting to load ESAPI.properties via file I/O.
Attempting to load ESAPI.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/ESAPI.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/ESAPI.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/ESAPI.properties
Loading ESAPI.properties via file I/O failed. Exception was: java.io.FileNotFoundException
Attempting to load ESAPI.properties via the classpath.
SUCCESSFULLY LOADED ESAPI.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!
Attempting to load validation.properties via file I/O.
Attempting to load validation.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/validation.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/validation.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/validation.properties
Loading validation.properties via file I/O failed.
Attempting to load validation.properties via the classpath.
SUCCESSFULLY LOADED validation.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!

Hi jtwcarboy,
Apart from message in logs are you facing any functionality issue is AEM?
Thanks,
Sham

What does "File not readable" error message mean?

I am trying to copy/paste art from a supposed "corrupt" file into a brand new document. When I paste, I get this particular error message: File not readable. What, exactly, does this mean?

Amanda,
It is nice to know that it works now. Thank you for letting us know.
Actually, the solution was identical to this part of the list in post #3:
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
I ruled that out because in post #2 you wrote
I have tried EVERYTHING ... Dumped the preferences....
Ctrl+Alt+Shift/Cmd+Option+Shift is the standard way of deleting = resetting = dumping the basic preferences so I was convinced you had done that already (hence my suggestion to start with 4 and skip 1) - 3)).
Actually, when you
4) Move the folder with Illy closed;
as suggested in post # 3, you move all the preferences to another place so that they are reset to the defaults when you open Illy next time; this procedure is more thorough (and therefore capable of solving more issues) and reversible so you can get the preferences back if it does not help.
I presume you did not try 4).

Mac PDF files not readable on PC

I am constantly getting messages from my PC friends that the photoshop files I create and then convert to either pdf or jpg are not readable on their pc. Sometimes the files are split into two files (one very small and the other large) with the same name. The larger file is usually able to be opened.
What can I do to make my proofs easier to read for pc users? This has gotten frustrating.
Thanks for your help.

The problem is that I cannot control what version of Adobe the person is using who I'm sending the file to. This has been hugely embarrassing to me as I've been sending out files with my work. Some of the recipients were kind enough to point out that the file seems corrupted, others simply put me on a "waste of time" list.
I've tried it on my windows machine, and using Acrobat Reader 8 and Acrobat professional 7.0. The text appears as little circles and the file is not readable.
On the Mac, I can reproduce the problem, too.
Adobe Illustrator (version CS) cannot read the file. Warnings are:
The font Univers-BlackExt is missing. Affected text will be displayed using a substitute font.
The font Univers-BoldExt is missing. Affected text will be displayed using a substitute font.
The font Univers-Condensed is missing. Affected text will be displayed using a substitute font.
The font Univers-Extended is missing. Affected text will be displayed using a substitute font.
The font Univers-ExtraBlackExt is missing. Affected text will be displayed using a substitute font.
The font Univers-Oblique is missing. Affected text will be displayed using a substitute font.
To preserve appearance, some text has been outlined.
Acrobat 6.0.2 Professional cannot read it on the Mac
Acrobat Reader 8.1.7 on Mac has no problems with it. It displays perfectly, just like under Preview.
But this is somewhat beside the point. A PDF file should be portable, so once I have one there should be a way to make sure it can be read by all Adobe products that can read PDF. How can I make sure?
Given that I can see everything perfectly on my Mac (e.g. using Reader 8.1.7), how can I ensure the same can be seen by any other user on any system reading a PDF file? I guess that this has to do with your (Adobe's) PDF specifications. How can I "enforce" those?
Many thanks!

I-Movie project file not readable!?!?!

Just did a lot of work in I-Movie 4.0 and had a good 25 min. of almost finished movie and a lot of clips stored in the clip window. This is a project I have been working on for a few weeks. Later when I went to turn I-Movie back on it said the I-Movie project file was not readable. I have never seen this happen. I don't know what I could have done? I was emptying some trash before I turned it off but there is no way I would have erased the movie. How did I corrupt the file? I can access the time line movie through the quicktime file but there are lots of missing sound and I'm missing all the extra clips. How can I get that I-Movie project file to open!?!?!?

It's usually possible to re-open a damaged project by identifying and removing any flawed clips — those that were damaged by emptying the iMovie Trash. I can usually help you do that if you send me a couple files.
This describes what files to send:
http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
That forum Topic also describes the problem, if you wish to learn about it.
Karl

Scanned pdf file not readable

When I scan my document and it goes into the export PDF it is not readable?

Do you get an error message?
[topic moved to ExportPDF forum]

Nikon D750 raw files not readable by lightroom?

I just purchased this camera and found out Lightroom 5.4 can not read the files.
Is there a way around this problem?

You need to download and install and use the free Adobe DNG Converter version 8.7RC to convert your RAW photos to DNG, and then import the DNG into Lightroom

[Ecore] xsd2ecore files not readable any longer after migration to Mars

Hello,
When working in Luna, I had no problems to visualise the contents of xsd2ecore files with the Ecore to XML Mapping Editor.
Now that I've migrated to Eclipse Mars, the files do not seem readable any longer. The editor emits two errors :
Quote:
org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
and
Quote:
ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or is abstract. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
Is there anything I have to do to make the editor work as before ?
I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
Thanks for any advice,
Thomas Elskens

Thomas,
Comments below.
On 14/07/2015 3:25 PM, Thomas Elskens wrote:
> Hello,
>
> When working in Luna, I had no problems to visualise the contents of
> xsd2ecore files with the Ecore to XML Mapping Editor.
> Now that I've migrated to Eclipse Mars, the files do not seem readable
> any longer. The editor emits two errors :
The XML Mapping Editor isn't the same as the XSD to Ecore Model Editor.
So it sounds like you don't have the right editor/model plugins
installed. In particular, the org.eclipse.emf.mapping.xsd2ecore bundle
must be installed for any editor to recognize this model. You can
update your installation to install it from the Mars repository.
>
> Quote:
>> org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri
>> 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> and
> Quote:
>> ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or
>> is abstract.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> Is there anything I have to do to make the editor work as before ?
> I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
> Thanks for any advice,
>
> Thomas Elskens

MDL files not readable in OWB 10gR2?

I have exported an MDL file in OWB 10gR2 for an entire OWB Project (using Design -> Export -> Warehouse Builder Metadata in the Design Center). I noticed that the resulting MDL file is not in readable ASCII format (unlike previous releases such as OWB 9i).
Is this the expected behaviour?
I guess it doesn't really matter what format it is in, since I was able to delete a table from the repository using the Design Center GUI and then re-create it in the repository by importing my MDL file.

Alas, it seems that the export is now a binary file. This probably has some real benefits somewhere, but I for one am not keen on it. There have been scenarios where I had to alter the MDL file manually to re-import it, but should such an occation present itself again, I won't be able to.
Not that I have been able to migrate to 10gR2 yet, due to a bug, that I might be able to fix myself if I had access to plaintext MDL file ...
Borkur

.mod files not readable

I recently purchased a Canon FS400 because the Apple site said it was compatible with my MacBook Pro. (I actually have 2, one running Leopard, one running Lion.) When I transfer the video to my laptop, it saves as a .mod file which iMovie won't recognize. I have googled how to convert .mod files to .mov files but iMovie is still not recognizing them. In fact, when I try to import a movie after conversion, iMovie gets totally hung up and the only way to do anything else is to shut it down. Any suggestions?

Well, I definitely remember clicking my Panasonic SDR26 camera several times in motion picture mode, and a couple times in still shot mode. A funny thing about that kind of a Panasonic camera, you have to rotate a tiny wheel on the back to select between still shot mode, and video mode. Regardless, all of those files were recorded onto a 2GB SD card, and were subsequently successfully transferred to my Mac Mini.
As you sagely observed, MOD is supposed to denote video, even if a couple of still shots managed to get in there somehow.
Any suggestions on how to view them? While I do have a spare PC compatible, I want to use my Mac for this particular thing.

Why are my Soundtrak AIFF files not readable to an audio CD player?

I am new to using Soundtrak and I am sure this is an elementary question for you experienced guys, but why will an audio cd player not recognize the .aiff files that Soundtrak creates jut by copying the file to a CD? It seems as if the only way I can make a copy that a CD player will recognize is to import it into iTunes, convert it and burn it to a CD from there.
Thanks,
Ricky

Ricky,
In order for a CD player to read .aiff files as music, they must be burned to a CD-R as audio not data files. If you just copy the files to a CD I think you may be putting data files on it which only a computer could read. I use Roxio Toast to burn my music CDs and it gives you a choice of data or audio burning. There are lots of other applications out there that can do that.
David

XML file not readable

Hi all,
we have a xml file found in the internet delivering actual currency rates (http://www.ecb.int/stats/eurofxref/eurofxref-daily.xml). After downloading this file I tried to create a Data Server. But when testing the Data Server the following error is raised:
java.sql.SQLException: ODI-40750: The model generated by the model mapper was not accepted by a validator: Model not accepted: ODI-40817: Namespace not found:
I used the JDBC Url: jdbc:snps:xml?f=c:\temp\eurofxref-daily.xml. Is this sufficient?
Other xml files work well but this one creates problems.
any ideas?
best regards
Thomas

Try This URL
jdbc:snps:xml?f=D:\oracle\product\11.1.1\Oracle_ODI_1\demo\xml\GEO_DIM.xml&re=GEOGRAPHY_DIM&ro=false&case_sens=true
Just change the parameters and test it.
Bhabani
http://dwteam.in

Converted file not readable

Similar Messages

Maybe you are looking for