Converted videos without sound

i have added and converted 5 videos to ipod format, and added to my ipod.
even though the videos had sound before they are not playing with sound on my ipod or on my itunes
how can i make it play with sound

The discussion of converting/ripping DVDs to iPod format is forbidden on these boards - [Terms of Use|http://discussions.apple.com/help.jspa]. I would suggest searching the internet or going to the [iPod Lounge|http://www.ipodlounge.com] to find what you're looking for, because I'm sure you're talking about converting your home movie DVDs to iPod format and not breaking the Copywrite protection of Commercial DVDs and U.S. Federal Law in the process.
P.S. Breaking Copywrite Protection is also against the law in most other countries as well.

Similar Messages

  • Air ios stagewebview youtube video without sound

    I developed an app for IOS  with flash air 15.0
    I used StageWebView  to play youtube video in my app. On some ipad  I have video +sound and on other only video without sound.
    Is someone have a track for a solution?
    You can find my app on the apple store or play store , find :
    "fare, le mond de la propreté"
    Best regards
    Jean Luc

    I installed KDEmod-minimal and solved the problem of sound. I believe that when I installed and kdebase-workspace kdebase-konsole, was missing a package but do not know yet what package.
    Thank you!

  • How can I record video without sound?

    I would like to record videos without audio on my iphone? Is their a way to record videos without sound in the default camera app? If not than does any one know of any apps that can?

    Do you happen to have your phone set for mute?  Apparently (with the Note 3) this would also mute recording of sound in videos.  Using normal recording mode?    Slow mo and other modes may not record sound either.

  • Phone depicts the video without sound

    Phone depicts the video without sound , Please respond!!!

    You still have a conversion problem; iPods don't like multiplexed audio/video (mpeg). Compare your encoder settings with the specs and try again. Don't worry, I had the same problems (and started using Nero Recode).

  • Video without sound

    after adding videos to my library and "convert selection to ipod" sync it with my ipod so far so good. but when opening the video it worked without any sound. please help

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Videos without sound

    I have the latest itunes on my pc and videos in an endless list of formats avi mpeg flv wma
    I've imported the files into the itunes library and through the advanced option I click the 'convert to ipod/iphone version'
    it takes AGES for the conversion only to find out the video lacks sound. There is no audio signal at all.
    Any suggestions?

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (36772)

  • Itunes/QT converts video from sound to no-sound

    I have a video that has sound. when i convert it for ipod or when I convert in QT to ipod, it ends up converted with no sound. Any thoughts? Thanks!

    iTunes and Quicktime don't much like muxed MPEG files, they lose the sound when you convert them.
    Here's a post I made with some ways around this: http://discussions.apple.com/thread.jspa?messageID=1171379&#1171379

  • Is it possible to record a ipad video without sound?

    Have tried everything, but unable to record videos without any sound.

    I don't think you can. There's a low tech approach, put a piece of tape over the microphone. Might not cut it all but might mute it down.

  • IPod Video without Sound, Partial name

    I transfer my videos to my iPod and they show up on there and everything, I just can't hear it. Yes, I've converted them and everything.
    Why can't I hear my videos? And how can I fix that?
    Plus, I named my iPod "Ash's PARTAY Machine" But on my iPod it says, "Ash's PARTA" ....Why?

    First, for the name thing, I just picked a name that
    was too long.
    The name was not too long for say, it is just that Windows can only display so many characters for a device's name. If the iPod was formatted for use with a mac, the name would most likely be displayed in its entirety.
    As for the video and sound, I needed the Videora
    converter to make the videos compatible for iPod
    Video.
    Again, your files were Muxed. Videora can handle them, keeping the sound with the video.
    Glad the issue was worked out!
    btabz

  • ITunes converts video, drops sound.

    Everytime I spend 4+ hours converting a 20 minute video, iTunes cuts out the sound on the video.
    Anyone know how to fix this problem?

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Iphone 4 some videos without sound

    I did make some videos today with my iPhone 4. In some of the videos the sound is working totally normal, but in some of them, you can't hear anything. Nothing. No single noise.
    Can you tell me what is wrong? And if there's a way to get the sound back on the videos??

    Hi there eva2808,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting steps that’ll resolve most issues like the one that you’ve described, where you aren’t hearing audio in videos that you’ve recorded with your iPhone.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    Cheers,
    -Jason

  • Xperia Z2 Video without Sound

    Hi, 
    My z2 is abour 4 Weeks old. Evey Software and Android is the newest version. 
    the first days I was able to record videos with sound.
    3 Weeks later I tryed that again on some really great moments in my live and when I wanted to watch the video the video is playing with .. NO SOUND..
    In the camera Settings the microphone is ON.
    In the last weeks i was doing recordings of some music with the Sony Microphone STM10 . Here I can record sound.
    Maybe this influenced something on the video recordings?
    PLEASE SONY HELP!
    Thanks..
    Solved!
    Go to Solution.

    some times but try this 
    go settings>>apps>>all>>camera>>clear data and restart your mobile and try it 
    Do not forget to give kudosand to select the correct answer 

  • Video without Sound on the Ipod HELP!!!

    I convert my ordinary music video's to m4v in quicktime.
    and then put them music video on my Ipod but when i take the ipod out and try to listen to the video there is no sound at all and then i try to hear a mp3 song and it works.
    so what can be the problem ???

    Gulliver: That method works for Mac's, but that software isn't available for Windows machines.
    The link I posted above gives two different solutions for Windows users, one of which uses VirtualDub (free), and the other of which uses TMPGEnc (pay software, but the method I posted does not use the purchased functionality of it).
    Of course, if you don't have Quicktime Pro for encoding, there's always Videora, which is easier and faster, but which doesn't produce as high quality encodes for H264 formats.

  • Converted video no sound

    I have converted a mpeg video using itunes but there is no sound, just picture. can anyone help me?

    More info is here.
      Other OS  

  • Converting videos: No sound

    When I play a video on my computer it works just fine, and there's sound and everything. But when I convert it using itunes so that I can put it on my ipod, the product of the conversion doesn't play any sound, neither on my ipod or on my computer. Any suggestions as to why this is happening would be great, thanks.

    When I play a video on my computer it works just
    fine, and there's sound and everything. But when I
    convert it using itunes so that I can put it on my
    ipod, the product of the conversion doesn't play any
    sound, neither on my ipod or on my computer. Any
    suggestions as to why this is happening would be
    great, thanks.
    Hi
    I have the same problem, but no solution. Can anybody help me please ?

Maybe you are looking for