Converting 9ias installation with infrastructure to standalone version

I have a 9ias web server which runs OC4J applications that was installed against an infrastructure server and which uses that server via OID to connect to the oracle databases.
The infrastructure server was to be used to administer SSO but this is no longer required. Is it possible to remove the link between the 9ias web server and the infrastucture and turn it into a standalone version ? If so how do I do it ?.
Regards,
Chris

dcmctl LeaveFarm

Similar Messages

Need a plugin to convert Raw files with CS 6 standalone version. 8.7.1 version of ACR is not compatible with CS 6 in non-cloud form.

We have a site license for CS6 for our company and for the past year have not been able to convert RAW files from our newer cameras using Adobe Camera Raw. We do not want to use the Cloud version as we work off laptops in the field and overseas and even our offices have only dial-up for internet access where we are located in Monterey.
Can anyone recommend a plugin raw converter so we can continue to batch process our files with CS 6?

The camera raw 8.7.1 plugin should work fine in the photoshop cs6 non cloud license version.
The only exceptions being if you have mac os x 10.6.8 or windows xp/vista, then 8.3 is the newest camera raw plugin that works.
Which operating system(s) do you have?
Have you tried Help>Updates from within photoshop cs6 to get the 8.7.1 camera raw plugin.
Here's an 8.7.1 camera raw plugin installer for photoshop cs6
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

9iAS installation with 9i DB on same machine(Urgent)

Hi,
I have installed Oracle 9i on windows NT. The installation was successful. And am now trying to install Oracle 9iAS 1.0.2.2.1 on same machine.I have done all the necessary pre-installation tasks.
But as soon I run setup of disk 1 of 9iAS it gives error as =>
Dialogue box title: "SEVERE: Unable to verify iSuite Product Install Configuration"
And message is:
"Setup has detected that your iSuite Product Install has not been setup correctly, probably because the installation was aborted.
Please restart Setup."
The installation of Oracle 9i was successful and was not aborted in between or so.
Even if I restart the setup same errors comes.
I am not able to understand why this error is coming. Is it a problem related to the installer version? Has somebody come across such a problem? Please help. I need it quite urgently.
Thanks,
Pallavi.

Also make sure to check out the recently published whitepaper on Portal Center: (http://otn.oracle.com/portalcenter - item #2 in What's New in Portal?). Summary is listed below:
Step-by-step Guide for Installing Oracle9i EE (9.0.1.1.1), Oracle9i Application Server (1.0.2.2.2), and Oracle9iAS Portal (3.0.9.8.2) on Windows 2000
The guide takes you through the entire installation process in a clear, easy to understand manner. While designed for those with minimal Oracle-specific knowledge, it can also be quite useful for those who wish to quickly set up a stand-alone evaluation or test system using the default settings.

Installation with new adobe air version

Hello,
I have a .air file which was created a few weeks or months
ago. To install the application, it was needed adobe air version
beta 3.
Now, most of my customers have a newer version of adobe air
installed on their computer, and when they try to install my
application, it's not working.
My question: what can I do to be able to install my
application using the new adobe air version ?
Thanks for your help

Thanks for your answer.
I downloaded Flex Builder 3 trial version, but I don't know how to use it...
I have a folder with subfolders .settings, bin-debug, libs and src.
There are files into these folders.
I guess I successfully imported the project files, but when I click on the "run" button, I'm getting 13 warnings.
I don't know how to do to rebuild my application, I'm completely lost.
Can anyone tell me what I should do OR tell me where I can find a step by step guide to building ?
Thanks a lot.

Trouble converting files created with 9.2 using 5.0 version.

I have multiple pcs using 5.0.1 version of acrobat without any problem. Recently bought new pc with 9.2 installed. Problem is when I create with new version, older versions can't open. Error message says file corrupted. I tried downloading all upgrades for older version. Is there a solution without upgrading all other pc's with newer version?

I'm using Acrobat distiller from my 9.2 version normally converting a word document into PDF. I haven't really changed any settings from original installation, but I'm afraid I must have some settings that are preventing those with the 5.0 version from opening.

Installation of SAP J2EE engine standalone version

For administiring J2ee on the WebAs, SAP recommends installing the J2ee engine standalone version on a PC. Where can we find the standalone version? In case, i use the J2ee engine CD available with WebAs, which mode of installation should i choose (1 - For existing Central Instance, 2 - Dialog Instance, 3 - Gateway Instance).
Can anybody help with this query?

Hi Ashish,
What version of J2ee do you wish to manage ?
<u>Generally</u>
You can use the J2ee server avaliable at SAP MarketPlace,Just go to alias /swdc and search for J2ee (Search for all categories), from the results you can choose the version that is relevant to you i.e. 6.20 6.40
As far as I know you can use the clustered server patch (If you only want to use the admin tool), these patches are full installations, unpack using sapcar -xvf [File that you have downloaded] and run visual.bat to begin installation.
I dont quite understand your exact requirements but I hope this help, do let me know the outcome.
Regards
Vinod.Mehra

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Oracle Standalone DB 11g installation with ASM on Windows 2008

Hi Experts,
I would like to install Oracle Database 11g R2 on Windows 2008 with ASM .
Since I want to do it as a standalone database server , I did not confiugre any shared storage. I have a single disk on my machine with 1 TB space.
There is a free space of 750 GB and want to use that space for ASM disks.
Can someone guide me on how to configure ASM disks ?.
Thanks

859875 wrote:
Thanks Fiedi. Thanks a lot for your response.
Last month I did RAC installation where I need format raw devices using below commands :
clean all
create part ext
create part log
Is it not required for standalone DB installation with ASM ?
Basically preparing disk for ASM on RAC or non RAC is the same
>
>
I am able to create 4 logical raw devices (175GB) each. 2 for Data and 2 for DB flash. However I am not able to clean those raw devices with "clean all" command.
Can you help me ?
what error did you get?. Try delete the logical partition and recreate it

I cannot use this version of the application Adobe Air Installer with this version of Mac OS X.

I have Mac OS 10.5.8 and every time I try to install Air Adobe 3 I get the message
"You cannot use this version of the application Adobe Air Installer with this version of Mac OS X."
Could anyone help me?
Jai

Hi,
Adobe won't be developing for 10.5.8 new features (including new runtime) only security relates updates for existing runtimes (Flash 10.3.*/Air 2.7.*). Flash 11/Air 3.0 are only supported on 10.6.8.*/10.7.*, see:
http://kb2.adobe.com/cps/916/cpsid_91694.html#main_system_requirements
There is recent, lengthy thread on forums with Adobe's employees statements on that subject (support/development for 10.5.* and newer) but I cannot find it quickly as basically forum search is broken/hard to do,
regards,
Peter

OSB : Installation of Eclipse for OSB.. Is there a standalone Version?

All,
Sorry for the fairly rudementary question, however after seaching around on the Oracle OSB Downloads site, i can't see an answer.
My question is essentially is there a standalone version of Eclipse with OSB plugins that can be utilised? By this I mean just install Eclsipse and extend with OSB design time plugins.
urrently the only approach I can see when using the IDE, it to install the WebLogic with OEPE (manually unzipping for 64 bit clients) and then installing the OSB Server into the Weblogic Server / OEPE. Therefore at present I cant see how this can be acheived without installing all the components (WLS, OSB Server).
FYI, the clients preference is to utilise the IDE as apposed to utilising the Web OSDN Console for development? (for a number of reasons I won't go into). They are utilising SOA Suite 11.1.1.5 with Feature Pack for BPM
I appreciate any comments or expeirences regarding this
Many Thanks
Dave
Edited by: DavidGaskell on Mar 2, 2012 10:51 AM
Edited by: DavidGaskell on Mar 2, 2012 10:52 AM

Dave,
My question is essentially is there a standalone version of Eclipse with OSB plugins that can be utilised? By this I mean just install Eclsipse and extend with OSB design time plugins.Unfortunately there is no standalone version available for OEPE with OSB plugins. If you want to use OSB plugins, you have to install OSB on the same machine.
Regards,
Anuj

Download the CC version of LR or continue with my standalone version?

I already have the standalone version of LR 5. Decided to join CC when the new photography deal came out. I downloaded Photoshop, but wondered if there was an advantage to downloading LR since I already have it. Is the CC version different/better? Or is there some other reason?

you should keep your stand-alone version installation file and serial number in case you terminate your cc subscription.
in the meantime you could uninstall your stand-alone and install the latest cc versions.

Installation failed NW2004s with SP9 (Java Trail Version) failed

Hi All,
I am trying to install NW2004s with SP9 (Java Trail Version) , that's failing Phase 14 of 32 in CreateDatabaseInstance failing.
<b>This is the log :
</b>
ERROR 2007-05-19 19:43:40
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-05-19 19:43:53
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-05-19 19:43:53
FCO-00011 The step sdb_init_instance_type with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|3|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .
Please suggest what is going wrong.
Thanks in advance.
AW

I got the same error, this is from my XCMDOUT.LOG
> Subprocess starts at 20070528020028
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n microdot-c01534 -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070528020029
> Subprocess call failed
ERR
-24961,ERR_STATE: cannot determine current db state

Problems : Oracle 9iAS Installation Windows XP Home Edition

Hi All,
I just installed Oracle 9iAS on Windows XP Home Edition.
Can anyone give me some idea how to resove the issues with the installation.
Infrastructure Database Registration Assistance - Canceled
Please provide either oidpassword or obfuscated password
Usage: java oracle.ias.ldaporacfg.LdaporaCfg Parameters
Parameters are -o OracleHome -h oidHost -p oidPort -u oidUser -w oidPassword -d obfPassword
Infrastructure Schema Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
1) Infrastructure Instance Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
2) Oracle 9i Application Server randomize password - Failed
java.lang.NumberFormatException: %OIDport%
3) Single Sign-on Configuration Assistant - Failed
Parameters passed to ssoca : param0:C:\oracle\as param1:orasso param2:***** param3:aurigadatamart.pacbell.net param4:389 param5:cn=orcladmin param6:***** param7:aurigadatamart.pacbell.net param8:1521 param9:mat param10:AMERICAN_AMERICA.WE8MSWIN1252
Failed to obtain OiD password. Exception is :java.lang.Exception: Version mismatch!
Thanks in advance for your kind help!!
Ramesh

XP is not a supported platform. Please try Win2K or NT.
See certification matrix:
http://otn.oracle.com/software/products/ias/files/20_certification.html
Hope this helps,
Ashesh Parekh
Oracle9iAS Product Management

How to download a standalone version of CSA Agent

Hi gurus,
I know that Cisco ships the security server (CSM) with a standalone version of CSA Agent. Is there any way to download this agent without deploying CSA MC server? I need to do the internal posture validation with Ciscosecure ACS server and create a policy for the Cisco Security Agent presense
Eugene

No, there is not, installations come from the csa management center, standalone agents are part of
cisco ip telephony systems and not freely available to download.

Error starting the 9iAS installer on Windows 2000 on P4 laptop

I am having problem running 9iAS Installer on my P4 Laptop.
any solution?

Hi
I have successfully installed Oracle products in P4 hardware configuration and there is a know bug in Oracle & P4. Follow these steps below and I am sure that you will be successful in installing Oracle on P4.
Background:
When installing and configuring Oracle 8i to support a Syllabus Plus timetabling application on a Pentium 4 Server with Windows 2000 Advance Server, the following issues were encountered:
1.     The Oracle 8i Universal Installer (OUI) aborts without notice
2.     When installed using either the Oracle 9i OUI or the patched 8i OUI downloaded from Oracle Corporation, errors occurred during installation and java based configuration tools such as the Database Configuration Assistant and the Network Configuration Assistant would not run.
Problem Causes
Oracle Corporation have documented the following known issues:
1.     The OUI 8.1.x fails to recognize the P4 processor and aborts without notice.
2.     The OUI 8.1.x or above has problems on machines that use the Sun JRE and Symantec JIT. Windows 2000 (all versions) and Netware platforms are affected by this.
Work Around
The following work around has been used successfully at the Northern Territory University to overcome these problems.
     1.     Install Oracle 9i patched installer available from Oracle Technology Network website on the machine running on Pentium 4 Processor.
     2.     After installing Oracle Universal Installer, open file oraparam.ini and make the following modifications: (Assuming CD-ROM Drive is d: and you are installing Oracle from CD-ROM)
     a.     Change the Source= line to use the full path to the CD instead of relative path. (i.e. Source=d:\stage\products.jar)
     b.     Change the JRE_Location line to use the full path to the CD instead of relative path. (i.e. JRE_Location=d:\stage\components\oracle\swd\jre\1.1.7\1\datafiles\expanded)
     c.     Change the OUI_Location line to use the full path to the C drive (where the installer is installed) instead of relative path. (i.e. JRE_Location=c:\stage\components\oracle\swd\oui\1.6.0.9.0\1\datafiles\expanded)
     d.     Change the JRE_MEMORY_OPTIONS line to add -nojit as the first argument. (i.e. JRE_MEMORY_OPTIONS=-nojit ms16m ms32m) Other entries should remain same.
     3.     Launch OUI and this will use the modified oraparam.ini file and pick up the information from the CD-ROM. (since the absolute locations are specified)
     4.     Choose the custom install and choose not to create the database during the install. This way, the DBCA will not be launched during installation.
5.     The Net8 Configuration assistant will still be launched and there is no way to suppress it. If you need to kill it due to installer hanging then in the configuration tools window highlight the Net8 Configuration Assistant and click Stop. If this does not work then look for the most recent JRE process using task manager and kill it manually. Note: The OUI itself will also have a jre process. Make sure to kill the only the most recent process.
6.     After killing the configuration tool, continue through the installation to the End of Installation screen. We can modify the configuration tool to use this option nojit.
     7.     Once installation is complete, each of the following files in the ORACLE_HOME needs to be modified:
Each file will contain a command similar to the one following, which should be modified to include the option -nojit.
Eg: Command=(c:\program files\oracle\jre\1.1.7\bin\jrew nojit classpath.
     a.     assistants\dbca\dbassist.cl
     b.     assistants\dbma\dbmig.cl
     c.     assistants\ifa\ifa.cl
     d.     bin\owm.cl
     e.     ldap\oidamdin\oidadmin.cl
     f.     network\tools\netasst.cl
     g.     network\tools\netca.cl
     h.     owm\install\instelogin.cl
     i.     owm\install\instowm.cl
This (-nojit) is the only modification required to enable the configuration tools. After these changes the configuration tools like Net8CA and DBCA can be launched from the start menu.
Note: if your Oracle server is already installed and running but configuration tools are not running then just edit these files mentioned above (from a to i) and then launched configuration tools, they all will work.
Thank you
Amit

Converting 9ias installation with infrastructure to standalone version

Similar Messages

Maybe you are looking for