Converting a 16:9 video for iPod

I exported from FCP a 16:9 video using Compressor for use on an iPod. When I play it though it looks squished horizontally and the people look thinner. Is there something else I need to do to get this to look right?

You've probably discovered this by now, but if you're exporting to iPod, there are certain things that you must do differently (especially in comparison to exporting for DVD):
Do not export directly to Compressor from FCP. While this produces the best quality with MPEG-2 files, Compressor doesn't read chapter markers (at all) or the aspect ratio correctly (in most cases) for .m4v files.
Manually resize your QT movie. If you're using anamorphic video (DV, 8-bit) or a video format where the display size is different from the codec's frame size (HDV, DVCProHD), export a reference movie from FCP. Then, in QuickTime Pro, alter your movie's dimensions to suit the display size (ie, adjust anamorphic NTSC DV to 720x404). Then drop your QT ref movie into Compressor and select the iPod setting.
But, being that some time has passed since you've asked this question, I'm guessing you've learned these lessons (like me) the hard way...

Similar Messages

Converting an MPG video for ipod.. please HELP

Hello... i'm sorry about my bad english...
I tried many times converting videos for ipod, it allways convert them and than they become without the sound... someone can help me with that?
Thanks
Leo

Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Converting videos for ipod trouble need help plz

i always have to convert my videos for ipod but when i do, there is no more sound. how do i fix this?

Julia,
You need to format the iPod for Windows use.
Download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted, then follow the set up procedure.

What is the best way to format Videos for ipod touch?

What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
Mpeg streamclip-free. Works great, has presets or can customize the output.

Itunes converrts videos for ipod but then thay have no SOUND!!! Help please

Itunes converrts videos for ipod but then thay have no SOUND!!! Help please
Just bought it a couple of days ago, and its doing this!!! why doed the videos now both on my ipod and itunes not have sound?

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Converting Nokia N95 MP4 videos for use with Premiere Pro?

What would you say the best way to convert Nokia N95 MP4 videos for use with Premiere Pro is?

Sheesh.
This "
How do I convert my files?" entry at the PPro Wiki might offer some insight.

Tutorial: Converting Video for iPod (Read BEFORE You Post)

Since 1/2 the bandwidth is about the same question - how to convert (Filetype X) to iPod video (MPEG-4 or H264) - here is the simplest and FREE method using one piece of FREE software and the ability to do a bunch at a time in a batch process.
-------------------MPEG-4 CONVERSION FOR IPOD----------
Start with a muxed file, e.g. MPEG-1 or 2. I am starting with an MPEG-1 music video clip. Update: MPEG Streamclip 1.5 now accepts almost all video clips, AVI (with the right DIvX or 3ivX codecs installed) and QT. So open whatever you have in Streamclip and follow these steps:
Open in Streamclip
Select File Export to QT (or new setting: File Export to MPEG4)
Big window opens. Select the codec from the top pulldown- Apple MPEG-4 Compressor
Select 40% quality (this lowers the bit rate and makes the file smaller and conform - at 80% the file is 120MB vs. 10 MB at 40%) as you don't want huge files.
Under Sound Select AAC audio codec and 128 kbps
Under frame size pick 320X240
Click Make Movie and where it will go of course.
On my G5 a 3'46" MPEG-1 music video was converted to a 10.1 MB mov MPEG-4 file in about 25 seconds. With a single G4 that might be 3 minutes. Bitrate is: 370 kbps video and looks fine at the actual size in QT and will look OK on the similarly tiny iPod screen. I was quite impressed by quality for such a small movie. I could goose it up to 50% or 60% to see how bit it gets but it looks good at 40% There may be a sizeable increase in size per 10% increase so before btach processing 100 try one at 40 or 50%.
-----------IF YOU MUST HAVE H264------------
Open MPEG file in Streamclip: Select the (new) Export to H264 setting that doesn't crash like 1.3.1 did - or you can use these steps and see which is faster if at all. Which allow you to use the preset in QT Pro to export to iPod format (which is H264 and takes a long time).
Select Apple Animation as the codec for Compression at 100% quality
Same sound setting as above
Pick the frame size that says (Unscaled) next to it such as
352X240 is common for MPEG-1 videos.
Make Movie - this results a huge file. But you can get rid of it later.
Open that huge file in QT Pro.
Do file export and pick the preset at the bottom that is "Movie to iPod"
It will figure out the settings. It may (it will)take a while but you get a M4V file in H264. My clip done this way took about 40 seconds to the Animation step and about 10 minutes for the QT to H264 step.
--------------------BATCH PROCESSING-------------
Select the batch list - it opens, you add files as many as you like, select convert to Quicktime, then follow the step above once, select the destination directory and then start and it will do one after another in sequence. Note the preview window that opens is the actual post-processed file and you can see at roughly iPod size how it looks in real time or as fast as you can process anyway.

H.264 is going to be slow. No doubt about that. It's still a new codec so it's expected to take a while to compress versus MPEG-4.
I remembered when MP3 was still new ... my 233 MHz P2 machine was just chugging along.
When Ogg Vorbis came along, I would expect the encoding time to be somewhat slower. I was right to a point but that was when I have yet to own a computer that's 1 GHz.
The same deal with compression schemes. For instance, I have found RAR, StuffItX, and 7zip to take it's sweet time, if using the highest settings, compared to ZIP on max compression.
I expected no different with H.264, albeit the encoding time is a bigger difference compared to, say MP3 vs Ogg, but I have learned that when new codecs and compression schemes come by, I expect them to take longer than what I've been accustomed to as I used different machines. It's either that or I buy a faster computer. For the record, it takes me between 2.5~4 hours to convert a 24 minute video to H.264 using my iBook listed below, depending on the complexity of the video.
The quality of H.264 is rather nice for 320x240, sometimes even better than MPEG-4 using the same bitrate and resolution setting, but the output filesize is sometimes smaller than the H.264 cousin because it compresses rather well.
However, let me tell you that I'm rather spoiled when it comes to certain technologies. If the iPod says that it supports 2.5 Mbps MPEG-4, I'll use that setting first and then compare the visual quality of a 768 kbps H.264 file. Most of the time though, the DVDs I've encoded doesn't even come near 2.5 Mbps. It's more like 500~1500 kbps.
Personally, I usually stick at 100% quality and use the Limit Data Rate feature. It's just that I get annoyed even by the smallest artifacts on portable video and the less artifacts I see, the less annoyed I get.
Just thought I'd share my 2 cents.

Not syncing after converting videos for ipod

SOS...I have an elGato eyetv on my mac and I have a few videos captured from it (eyetv) that i intend to put on my iPhone. I read the iPhone manual re videos (chapter 6 ipod) and follewed the instruction on converting so I did the " Converting Videos to iPhone by going to Advanced> Convert Selection for iPod". It seems iTunes did indeed the convert.
My question is I just put my iphone on the dock to sync with itunes but it's not doing anything. It's been there over 15 mins but no prompts etc. It says SYNCING CONTACTS WITH *'S IPHONE forerver on the top field or status bar of itunes. The cord-like thing in it is moving. Meanwhile, phone says Sync in Progress. Prior to converting the videos, syncing had been flawless.
Please help.. Thanks!

Opppsss, i talked too early. I'm not getting a sound from the converted videos. I now remember that sound has always been compromised converting to eyetv native format to QT. Is anyone familiar with eyetv? Your help would be more than welcome as to how I convert to mpeg WITH sound.
Thanks a lot.

Convert Video for IPOD

Please someone help!
I've added a "xx.mpg" file in itunes, then right click and choose "Convert Selection for iPod". Another file with same name is then created. I copy the new converted file to my iPod, however, there's only image but no sound. Can anyone tell me why and what video format can play in iPod.

The iPod and iTunes cannot play back that type of file.
The file must meet the following specifications to play correctly.
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
-or-
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats.
When you use the convert option does it create another file with the same file extension?
What is this video?

Convert video for ipod error

Recently iTunes has stopped converting videos for me. When I right click and choose 'Convert selection for ipod' I now get "Error occured while converting 'file name'. The required file cannot be found."
The file uploads into the library and plays great. This has just started happening in the last week or so, before then it worked fine. I am saving the original files as Quicktime MOV files and in the same location as they were being saved before.

Hi mvlys and all,
firstly, I assume you mean to suggest changing the preferences under the pull-down menu Edit => Preferences and then activate the Register Card "Advanced" and change the "iTunes Music folder location" to the default at installation.
I have never changed this and do not allow iTunes to move any media to the default directory, so there is nothing to change on my installation.
The message displayed in the pop-up says: "The required file cannot be found". This sounds more like iTunes was expecting to find some file belonging to iTunes at some specific location, but cannot. Which file is however not mentioned.
Is this forum being monitored by Apple?
Can we expect them to pick up on this error.
Message was edited by: Thommy-L

ITunes fails when trying to convert videos for iPod Touch

I have loaded videos taken from digital cameras (Fuji and Canon) into iTunes (latest version) and I can view them using the QuickTime reader (also latest version). Before syncing them to my iPod 4th gen, I go to advanced options and click on Convert for iPod or Iphone. After 1 or 2 seconds, iTunes craps out with what looks a protection exception. (iTunes has encountered a problem and needs to close. We are sorry for...)
When I click to find out more details, the Error signatures says Appname iTunes.exe, AppVer: 10.1.0.54 Mod Name: coreaudiotoolbox.dll ModVer: 7.9.4.0 Offset: 000b2f84.
I rebooted with same result. The same problem occured many times, with iPod connected or not and using different videos. I tried to download the test video from the Apple site, but nothing happens when trying to download.
I am on Windows XP, SP3, fully patched.
Thanks for helping.

OK. Problem solved.
I removed all Apple software using Add/remove software in Control Panel.
Rebooted.
Used Advanced System Care (free edition) to scan and fix the registry. There were over 200 problems related to iTunes or QuickTime in the registry.
Downloaded a fresh copy of Itunes.
Re-installed.
I can now convert videos to Ipod.
Hope this can help others having similar problems.

Converting videos for ipod

i have converted videos in the past and it works, but now i have .mpg files (itunes lists them as quicktime movies) but when i click on the option that says convert selection for ipod, when they convert they have no sound. So i tried to convert them with compressor, but it wont let me select files that end in .mpg

Convert your mpegs with iSquint instead of iTunes, then import them into your iTunes library/iPod and they should play perfectly. Good luck.

Cant hear audio after converting videos for ipod

After i convert any video i have with itunes, it loses the audio. does anyone know how i can fix this so i can watch videos on my ipod with sound

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Need help converting video for ipod

i dont know how to convert my videos for my ipod with quick time pro, can any 1 help me please
dell Windows XP

is there a way i can do it without buying something else as im thing of getting a mac book soon so i dont want to buy anything new for windows and i dont have the money to keep buying different products when itune should do it.

No audio when converting video for ipod 3rd generation

I read a thread that had not be answered regarding video to ipod that ends up with no sound. I wonder if anyone has found the answer to the problem. I have converted movies from imovie 08 and had no problems with sound but when I tried to convert a downloaded music video I only get the video and no sound.
Anyone have the answer to that one?
Thanks
Kevin

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
Patrick

Converting a 16:9 video for iPod

Similar Messages

Maybe you are looking for