Converting a Labwindows 4.0.1 project to Labwindows 6.0 project

Please send me the information for converting a Labwindows 4.0.1 project to Labwindows 6.0 project.
The problem what I am facing is
A dll which is working in Labwindows 4.0.1 is not able to be recognized in Labwindows 6.0.
So Please help me as early as possible.

Hello,
CVI 5.5 and above actually builds an executable instead of running a project from the CVI environment (as in CVI 5.0 and below), so all linked files have to be manually included within the project. For example, an instrument driver in the project that links to some dll will run in CVI 5.0 and below, but it will only run in CVI 5.5 if the lbrary file is included in the project. I hope this information helps.

Similar Messages

  • Converting a labwindows driver to labview

    http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9628659CE034080020E748...
    I am trying to convert the labwindows driver found at the link above to labview (8.5) and I am trying to do this via the tools-->instrumentation--->Create VI interface to LabWindows/CVI instrument driver.
    If I select "Basic" to do the conversion, I get an error message saying that it is not a valid .fp file or the file version is too low.
    On the site it lables the driver as being from labwindows/CVI version 6.0, which has worked for conversions before.
    If I select "Advanced" I notice that althought the .h file is present, the .sub file is NOT.
    My trial version of CVI is expired, if I uninstall and reinstall will I be able to generate a .sub file?
    Or is there another way to make this driver work?
    Solved!
    Go to Solution.

    Hello Lars,
    I saved the .fp file using CVI 2010 and now the error is gone when using the wizard. Attached you will find a fixed zip file.
    Regards
    Mart G.
    Attachments:
    ba6200a.zip ‏7 KB

  • The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

    The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1).  I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
    Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them.  I imagine they are unchanged, but cannot be sure.
    Thoughts? Is it possible to uninstall an update re-install it later?
    Please advise.
    Thank you.
    Brian

    Also...
    Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
    There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
    You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
    Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
    I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

  • Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.

    Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.
    Attachments:
    ACC3.squ ‏3 KB

    If you are using an older version of the CVI Test Exec toolkit, check with your local Field Sales rep to see about getting the necessary software to use for temporarily upgrading your existing Test Exec sequences to version 2.0 for migrating to TestStand.

  • Is there any way to convert video files and keep my project in Final Cut Pro 7?

    I am currently editing a project, and have been having multiple issues with freezing while editing. Upon doing some quick research, I learned it is bcause my clips are in the h.264 format, which is not a good editing codec. Is there any way to change the codec of the videos and keep the project I have?

    You might need to relink the timeline to the new media. Just take the H.264 files offline, and reconnect to the new media. If you media managed the sequence, it'd relink. But then you are only converting the files used in the sequence, not all your media.

  • Convert Flash 8 AS 2.0 project to Flash 9 AS 3.0

    I have a animated menu created using Flash 8 AS 2.0. Is there
    anyway I could convert that project to Flash 9 AS 3.0 project. I
    don't care about the AS codes. I could convert them by hand. But I
    would like to import all the designs to Flash 9 AS 3.0 paoject. Is
    it possible? If so how to do it? I could import it to Flash 9 AS
    2.0 but I want to use the AS 3.0 features in that project. Any help
    is appriciated. Thanks.

    open your fla in flash cs3 and change the publish settings to
    as3. then change your code and whatever else you want to
    change.

  • Converting flash document (FLA) to Flex project

    Hi, I am trying to convert flash document to flex project.
    I initially had the .swf file. Then I created flash document(.fla) from .swf file. Now I need to convert to flex project so that I can modify and add new functionality. Please let me know if there are conversion tools available or is this purely a manual effort.

    You should take your question over to the Dreamweaver forum if it asking how to work with HTML5.  HTML5 by itself cannot reproduce Flash designs... the burden is moreso on javascript and CSS to make that happen.
    http://forums.adobe.com/community/dreamweaver/dreamweaver_general?view=discussions

  • Cannot convert integer to string in ARM project?

    Hi all,
    I'm getting started with an ARM project in LabVIEW and I'm having trouble with a simple example: I'm reading integer values from an accelerometer and printing them to the front panel. I cannot, however, convert any of the integers to a string and display the converted value in a string indicator on the front panel. I can't find this problem listed as a limitation of the string methods in the ARM module: http://zone.ni.com/reference/en-XX/help/372459C-01​/lvarmhelp/arm_bd_strings/ Any ideas? A simple example demonstrating the problem is attached (although I suppose you can only run it without modifications if you have an accelerometer...)
    Thanks!
    Mike
    Attachments:
    problem_example.vi ‏18 KB

    Did you try the format into string function?
    Just a thougt
    Tim
    Johnson Controls
    Holland Michigan

  • How can I convert my Final Cut Pro 5 projects to Final Cut Pro X using XML via 7 to X?

    I have been using Final Cut Pro 5 for years and I was considering upgrading to FINAL CUT PRO X.  But I soon learned about the compatibility issues which leaves me with a bit of a dilemma.  Then I learned about 7 to X, which apparently can convert FCP7 projects via XML to FCPX.  That made me wonder if I can XML all my FCP 5 projects and have FCPX open them.  Is this possible?

    Best to post this question in the FCPX forum.
    x

  • Convert Quicktime files or FC Pro projects to Flash files for the internet

    I've never done this before. I have finished FC Pro projects that I need to convert to flash files for the internet. Am I saying that right? I've converted them to QT files. What's next? Thanks

    This site and the readme links and forum can help you display it on the web, works great with Flash or H.264.
    http://www.jeroenwijering.com/?item=JWMediaPlayer

  • Converting a 1080p 23.976 fps project to 720p60 for broadcast

    How do you convert a 23.976 progressive frame rate into a 59.94 progressive frame rate? Is there an after effects pulldown option that is not intended for interlaced 29.97 fps, but for progressive HD formats like 720p60?

    Hi Jim,
    thanks for the info thats great ! the footage is just vision and wont matter if its slower which is good, i was concerned about any NTSC / PAL issues with the 25p stuff - but would i be correct in saying that as these files are raw and from the Epic / Scarlet that they are not either NTSC or PAL until they are outputted that way in post? Unlike say a a Canon 5D where you assign either NTSC or PAL within the camera?
    cheers,
    Tim

  • Convert 24 fps to 25 fps project.

    I have accidentally made some recordings in 24 fps.
    The need for a film which should also be on television - in a 25 fps project.
    So the problem is that I have both 24 fps and 25 fps in the same project. it gives strobe flashes. Is there a way I can avoid it?

    Personally, I'd say you're massively hosed...
    You could try optical flow retiming - available in Motion/Shake/Compressor to generate new clips with the proper frame rate. But that takes a lot of time. Can you post an example of the flashes you're talking about?
    Patrick

  • How can i change the last frame in a trailer i have converted.  everything else is fine but the wording is wrong on the final "credits" and don't know how to edit after converting it to a project.  Thanks to All.

    looking to edit the final frame which is the the "credits" section.  I have already  converted the trailer.  Is it too late to correct some nserts in the credits?
    Thanks to all.

    If by "converted" you mean that you've converted the trailer to a normal project using the menu option File>Convert to Project, then YES it is still possible to edit the Credits Title.
    In the converted project, double-click on the blue Title bar that sits above the background clip. In the Viewer, double-click on the text you wish to change (or highlight text by dragging over it). Now you can replace the highlighted text by typing in the new text. You can also change fonts and font colours.
    It's always good practice to duplicate the Trailer before converting it. To do this, while in Project Library view, click on the Trailer name in the Library then select File>Duplicate Project. A copy will appear in the Library with the same name as the Trailer, but with the number 1 appended. You can rename this copy as desired. Now, convert the duplicate to a standard project and continue with your editing as required. You now have the original Trailer in template form (which can be further edited), and can duplicate it again if required.
    John
    EDIT: Regarding my first sentence - just noticed that you did mention "converting it to a project" in you topic header. Sorry!
    Message was edited by: John Cogdell

  • ProRes project - Convert to Proxy mid project.??????

    Im working on a pop video...shot on a Canon 550d.
    Ive imported the footage using the CANON conversion... I choose Pro Res .....(Not Proxy)
    50fps  1280 x720...
    Started editing and realized that I cant run Multicam on my set up.....grinds to a halt ( 6 angles)....
    How can I convert to Pro Rez Proxy mid project and carry on working , then go back to the full Pro res for master.
    Ive messed around with Media manager.... but not quite sure as the right wrokflow...?
    Ideally I would like to edit in DV PAL ( like I used to on my old FZ1)..... BUT the system media manager wouldnt allow me to work in DV 25fps....
    As the orginal foootage is all 50fps....
    BUT PROXY may be the way to go....
    Also I converted about 10 clips using Cinema Tools to 25fps for slow motion, this has given me exactly the same file names for the slow mo clips as the master clips...
    Thus creating confustion when trying to re connect to higher rez formats.
    ALL HELP greatly welcome....... ..   Im sure im making it more difficult than it needs be...
    THANKS
    ROB

    This should help in your decision
    http://www.larryjordan.biz/picking-the-right-version-of-prores/

  • Convert RoboHelp for Word project to RoboHTML

    I have a couple projects which are created RoboHelp for Word
    in RH6. The projects now need to be converted to RoboHelp HTML
    projects and Flash generated outputs. In conjunction with this I
    have the following questions:
    1) Can RH Word projects be opened in RoboHTML? If so, what
    are the pros and cons and how is the conversion done?
    2) These independently projects will be linked/merged with a
    master project which in RH HTML. Will this cause some inherent
    problems.
    3) I know I can generate a Flash based output from RoboHelp
    for Word, however, how differently will (if at all) RH HTML treat
    these files if called from within an RH HTML generated project.
    4) I will also need to generate Printed documentation in the
    end. Any impact on that?
    Thank you in advance. A detailed answer would be greatly
    appreciated.

    All those questions and in detail too. This is a forum, not a
    book shop. :-)
    What we can do is give you some general guidance so that you
    can experiment safely, then come back with specific questions.
    You cannot open your RH for Word project in RH HTML. What you
    have to do is import the underlying document(s) excluding the
    footers as they contain RH for Word information that is not
    relevant. Before you do anything, zip up the existing project and
    keep it somewhere safe. Now you can use the project and blow it
    apart without worrying. If anything goes wrong, you extract the zip
    copy and start over.
    There's a topic on my site about importing ordinary Word
    documents (as opposed to RH for Word doc files) and that will be a
    good starting point.
    First get all the existing projects converted and running
    properly as independent projects before you give any thought to
    merging.
    When you are ready, then look at the topic on merging webhelp
    that is on my site. Just adapt as necessary for FlashHelp. I think
    you need at least RH6 to merge FlashHelp, maybe 7. Not sure without
    checking. RH6 FlashHelp has some indexing problems as you will see
    in another thread.
    RH generates files after which they go to development. What
    do you mean by RH HTML treating those files? Do you mean will their
    HTML be written differently? Almost certainly yes but why is that
    an issue as long as they look how you want?
    You will be able to generate printed documentation and that
    is covered by yet another article on my site. Maybe now you are
    getting the picture as to why nobody can provide the answer in
    detail on a forum.
    You have a massive task ahead of you and I think it would be
    foolhardy to start with your real projects. Starting from where you
    are, I would create some small RH for Word projects and then go
    down the path you have to. With small projects like that, you will
    be able to understand what is going on and the issues. It's the
    same reason why most driving schools don't start you off in a
    Ferrari!
    Good luck. Glad its your problem. :-)

Maybe you are looking for