Converting a single line in Input file

Hi Experts,
I tried searching the blogs and wiki in sdn. but couldnt able to find out.
Can anyone help in providing the blog for converting the input xml file which is provided only in one line.
and the output has to be according to the xml format ( every tag in different line ).
Thanks in advance
Divya

Similar Messages

I recently signed up for a one month trial of adobe pro. I logged in. I cannot convert a single page of PDF file to word or Excel with this trial. I just get the request to sign up for a year. What good is the trial if I can't try it?

I recently signed up for a one month trial of adobe pro. I logged in. I cannot convert a single page of PDF file to word or Excel with this trial. I just get the request to sign up for a year. What good is the trial if I can't try it?

Hey vcomfort6,
Please ensure that you are using Adobe Acrobat and not Reader to convert PDF file to word or excel.
Could you tell me whether it is a scanned document? Does this happen with all PDFs or any specific one?
Do you get any error message? What exactly happens when you try doing the same?
Hope to hear from you.
Regards,
Anubha

Dashes convert to single line

Hello,
On my iMac OS X 10.9.4, i am unable to create in TextEdit or Pages guitar tabs in the Courier font, like i did for years, by simply keeping my finger pressed on the dash key: all my dashes attach themselves together to form a continuous line as soon as i release the key! This behavior occurs in other typefaces—and in TextEdit in Plain Text as in Rich Text mode.
This has never happened to me before—i may have some settings or preferences off somewhere, but i have not been able to sort my problem out from my System Preferences. As i have also Kotoeri, i tried out switching to the Romaji mode: same result. i even opened old tabs and copied-pasted the original tabs, but as soon as i start inserting more dashes, they turn into a single line too.
I will be grateful to any fellow guitarist who will provide me with the solution, as i am clearly over my head with this! Thank you in advance.

In Oracle 9 you can get rid of the regex functions and use traditional SUBSTR, INSTR and REPLACE:
ABSOLUTELY NOT TESTED...
SELECT col1,SUBSTR ( ','||col2||',', instr(','||col2||',',',',lvl)+1,instr(','||col2||',',',',lvl+1)-instr(','||col2||',',',',lvl)-1)
FROM table_name,
 (SELECT LEVEL lvl
 FROM (SELECT MAX (LENGTH (REPLACE ( col2, ',',''))) mx
 FROM table_name)
 CONNECT BY LEVEL <= mx + 1)
WHERE lvl - 1 <= LENGTH (REPLACE ( col2, ',',''));Max

Overread lines in input file

Hi guys, i really hope u can help me.
We are trying to read a file via FTP which looks like this:
Dataname 639 539 00;;;;
Pos. :;Var;Name;GHNr.;Desc
4;1;ABB;639 539 00 9960/4;
5;1;ABC;639 539 00 9960/5;
Machine;;;;;
Porsche;;;mark;;
9 9 9 2 4 9 0 0 9 9 6 1;;;;;
Us.: 12.10.00 Em;;Nr.: ;6 3 9 5 3 9 0 0 9 9 6 0 ;;
So for me it is hard to read the data because the empty lines i don't need and for some results i have to read numbers at special positions (like the last devided with space).
Is there any chance to read this file this kind of dynamically?!
br Jens

I doubt that would be possible with the default File Adapter. You can however read every line and use User Defined Functions to extract the information you require.

Single line of text/email id to People or Group column

I have a list of employee details, along with their SharePoint email ID. I want to import this list along with a new People or Group column, where it reads the email id and picks the correct user from Active Directory. How to import this?

Hi Abul,
Based on your description, I did a test. When I used users' email address in excel table and imported it to SharePoint list, the column would be saved as Hyperlink or Picture type. If I used Domain\User, after importing it to SharePoint list, the column
would be saved as Single line of text type.
It seems that it only is converted into Single line of text or Hyperlink type when you import a table into SharePoint list, by default. There is not a way to convert the table column in excel file into People column in SharePoint list.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Read lines from text file to java prog

how can I read lines from input file to java prog ?
I need to read from input text file, line after line
10x !

If you search in THIS forum with e.g. read lines from file, you will find answers like this one:
Hi ! This is the answer for your query. This program prints as the output itself reading line by line.......
import java.io.*;
public class readfromfile
public static void main(String a[])
if you search in THIS forum, with e.g. read lines from text file
try{
BufferedReader br = new BufferedReader(new FileReader(new File("readfromfile.java")));
while(br.readLine() != null)
System.out.println(" line read :"+br.readLine());
}catch(Exception e)
e.printStackTrace();
}

Download created XML File in batch mode // Parse XML file into single lines

Hello!
I upload a CSV file and based on that CSV file I create an XML "object". First I uploaded and downloaded it via gui frontendclass, but as it has to be run in a batch in the night I need to upload and download the data via OPEN DATASET.
The import and transformation of the CSV file works fine, also the transfer into an itab with the same structure as a CSV line is ok. I also create the XML file, which could be downloaded easily with gui-download but it is not permittet.
Import of data: I scan the folder and get the filenames into a itab, I loop over that itab and read the single files like this:
 OPEN DATASET ls_convert_batch FOR INPUT IN TEXT MODE ENCODING DEFAULT.
 CLEAR tab.
 IF sy-subrc = 0.
 DO.
 READ DATASET ls_convert_batch INTO line.
 IF sy-subrc <> 0.
 EXIT.
 ELSE.
 CLEAR tmptab.
 SPLIT line AT ';' INTO tmptab-product
 tmptab-contract
 tmptab-extagent.
 APPEND tmptab TO tab.
 ENDIF.
 ENDDO.
 ENDIF.
The XML file has a strucutre like
<file>
- <file formant_no="1.1" format_date="02.10.2003">
<status>V</status>
<number>001001025</numbner>
<name>Schmeisser,Christof</name>
- <details>
- <detail>
 <contract>00000003494</contract>
 <name>Schmeisser, Christof</name>
 <invoice_no>000000003840</invoice_no>
 <due_date>20100601</due_date>
 <amount>140,00</amount>
 </detail>
- <detail>
 <contract>00000003495</contract>
 <name>Schmeisser, Christof</name>
 <invoice_no>000000003841</invoice_no>
 <due_date>20100601</due_date>
 <amount>130,00</amount>
 </detail>
- </details>
<elements>2</elements>
<amount_overall>270</amount_overall>
</file>
At the moment I download it like this:
CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 bin_filesize = l_xml_size
 filename = filename
 filetype = 'BIN'
* CONFIRM_OVERWRITE = '0'
 CHANGING
 data_tab = l_xml_table
 EXCEPTIONS
 OTHERS = 24.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSEIF sy-subrc = 0.
 lv_create_counter = lv_create_counter + 1.
 ENDIF.
But I need to download it via OPEN TRANSFER CLOSE Dataset as it has to run in batch mode.
Anyone has an idea? I am really desperate here. One idea would be to parse the single lines into a string and then create the XML file line by line as text and save it with ending XML, should work. But I don't know how!
Thank you very much in advance,
kind regards from Tallinn, Estonia,
Christof!
Edited by: Christof Schmeisser on Nov 25, 2010 7:51 PM
I edited the heading, would be too general and missleading!

Tipos Pools
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
TYPES: BEGIN OF xml_node_type,
 node TYPE char50,
 vlnode TYPE string,
 END OF xml_node_type,
 BEGIN OF xml_line_type,
 data(256) TYPE x,
 END OF xml_line_type.
Tabelas Internas
DATA: ti_xml_node TYPE TABLE OF xml_node_type.
Variáveis TYPE REF
*Type REF para utilizar no XML
DATA: ixml_type TYPE REF TO if_ixml,
 streamfactory_type TYPE REF TO if_ixml_stream_factory,
 ostream_type TYPE REF TO if_ixml_ostream,
 istream_type TYPE REF TO if_ixml_istream,
 parser_type TYPE REF TO if_ixml_parser,
 renderer_type TYPE REF TO if_ixml_renderer,
 document_type TYPE REF TO if_ixml_document,
 encoding_type TYPE REF TO if_ixml_encoding,
 node_type TYPE REF TO if_ixml_node,
 element_dtrans_type TYPE REF TO if_ixml_element,
 element_xml_in_type TYPE REF TO if_ixml_element,
 element_roteiros_type TYPE REF TO if_ixml_element,
 element_roteiro_type TYPE REF TO if_ixml_element,
 element_vias_type TYPE REF TO if_ixml_element,
 element_via_type TYPE REF TO if_ixml_element,
 element_dummy_type TYPE REF TO if_ixml_element,
 gw_xml_node TYPE TABLE OF xml_node_type,
 gw_xml_node_ret TYPE TABLE OF xml_node_type,
 gw_xml_node_err TYPE TABLE OF xml_node_type,
 gw_xml_node_xml TYPE TABLE OF xml_node_type,
 gw_xml_table TYPE TABLE OF xml_line_type,
 gw_xml_table2 TYPE TABLE OF xml_line_type,
 gs_xml_node TYPE xml_node_type, "WA para leitura do xml
 gs_xml_node_ret TYPE xml_node_type, "WA para leitura do xml retorno
 gs_xml_node_err TYPE xml_node_type, "WA para leitura do xml erro
 gs_xml_node_xml TYPE xml_node_type, "WA para leitura do xml info sucesso
 gs_xml_table2 TYPE xml_line_type. "WA para importar xml
Variáveis do Programa
DATA: l_value TYPE string,
 l_rc TYPE i,
 l_xml_size TYPE i,
 cod_cartaorepom TYPE char20 VALUE '123456789',
 v_caminho_exp TYPE string VALUE 'C:TEMP',
 v_salvaarquivo TYPE string,
 v_nomearquivo TYPE string,
 w_nodetext TYPE string,
 v_roteiros TYPE string,
 v_roteiro TYPE string,
 v_roteiro_codigo TYPE string,
 v_percurso_codigo TYPE string,
 v_percurso_descricao TYPE string,
 v_cidade_origem TYPE string,
 v_estado_origem TYPE string,
 v_cidade_destino TYPE string,
 v_estado_destino TYPE string,
 v_transporte_tipo TYPE string,
 v_cartao_taxa TYPE string,
 v_cobra_taxa TYPE string.
Constants
CONSTANTS: cc_39 TYPE string VALUE '39', " Numero 39.
 cc_dt_trans TYPE string VALUE 'data_transfer'," document_type(name)
 cc_metodo_cod TYPE string VALUE 'metodo_codigo'," document_type(name)
 cc_xml_in TYPE string VALUE 'xml_in'," document_type(name)
 cc_ct_tx_ativ TYPE string VALUE 'cartao_taxa_ativacao'," document_type(name)
 cc_cartao TYPE string VALUE 'cartao', " Parâmetro Perform.
 cc_xml TYPE string VALUE '.XML'," extenção
 cc_bin TYPE char10 VALUE 'BIN'." filetype
START-OF-SELECTION.
PERFORM yf_inicia_criacao_xml USING cc_39.
element_roteiro_type = document_type->create_simple_element(
 name = cc_ct_tx_ativ
 parent = element_xml_in_type ).
PERFORM yf_dummy_roteiro USING cod_cartaorepom cc_cartao.
PERFORM yf_finaliza_xml.
PERFORM yf_exporta_xml USING v_caminho_exp.
PERFORM yf_convert_xml_to_itab TABLES gw_xml_node_ret
 USING v_salvaarquivo.
END-OF-SELECTION.
*& Form yf_inicia_criacao_xml
 text
 -->VALUE(P_0783) text
FORM yf_inicia_criacao_xml USING value(p_0783).
DATA: s_encoding_type TYPE string VALUE 'ISO-8859-1'.
Cria o ixml factory
ixml_type = cl_ixml=>create( ).
*Cria o objeto com modelo
document_type = ixml_type->create_document( ).
*Cria o cabeçalho encoding="iso-8859-1"
encoding_type = ixml_type->create_encoding( byte_order = 0
 character_set = s_encoding_type ).
*Cria o root "DATA_TRANSFER"
element_dtrans_type = document_type->create_simple_element(
 name = cc_dt_trans
 parent = document_type ).
*Cria o node "METODO_CODIGO" e preenche com um valor passado no L_VALUE
l_value = p_0783.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
 name = cc_metodo_cod
 value = l_value
 parent = element_dtrans_type ).
*Cria o node "XML_IN"
element_xml_in_type = document_type->create_simple_element(
 name = cc_xml_in
 parent = element_dtrans_type ).
ENDFORM. " yf_inicia_criacao_xml
*& Form yf_dummy_roteiro
 text
 -->VALUE(P_0996) text
 -->VALUE(P_0997) text
FORM yf_dummy_roteiro USING value(p_0996)
 value(p_0997).
l_value = p_0996.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
 name = p_0997
 value = l_value
 parent = element_roteiro_type ).
ENDFORM. " yf_dummy_roteiro
*& Form yf_finaliza_xml
 text
FORM yf_finaliza_xml.
*Cria o stream factory
streamfactory_type = ixml_type->create_stream_factory( ).
*Conecta a internal table de XML com o stream factory
ostream_type = streamfactory_type->create_ostream_itable( table = gw_xml_table ).
CALL METHOD ostream_type->set_encoding
 EXPORTING
 encoding = encoding_type.
*Rendering the document
renderer_type = ixml_type->create_renderer( ostream = ostream_type
 document = document_type ).
l_rc = renderer_type->render( ).
*Salva o documento XML
l_xml_size = ostream_type->get_num_written_raw( ).
ENDFORM. " yf_finaliza_xml
*& Form yf_exporta_xml
 text
 -->VALUE(P_0783) text
FORM yf_exporta_xml USING value(p_0783).
CONCATENATE cod_cartaorepom
 sy-datum
 sy-uzeit
 cc_xml
 INTO v_nomearquivo.
CONCATENATE p_0783
 v_nomearquivo
 INTO v_salvaarquivo.
TRANSLATE v_nomearquivo TO UPPER CASE.
*Exporta o XML
CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 bin_filesize = l_xml_size
 filename = v_salvaarquivo
 filetype = cc_bin
 CHANGING
 data_tab = gw_xml_table
 EXCEPTIONS
 OTHERS = 24.
IF sy-subrc = 0.
 PERFORM yf_sapgui_progress_indicator USING cc_msg_xml_ok.
ELSE.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " yf_exporta_xml
*& Form yf_convert_xml_to_itab
 text
 -->P_GW_XML_NODE_RET text
 -->P_FILENAME text
FORM yf_convert_xml_to_itab TABLES p_gw_xml_node_ret LIKE gw_xml_node
 USING p_filename.
DATA l_count.
ixml_type = cl_ixml=>create( ).
Now Create Stream Factory
streamfactory_type = ixml_type->create_stream_factory( ).
CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = p_filename
 filetype = cc_bin
 IMPORTING
 filelength = l_xml_size
 CHANGING
 data_tab = gw_xml_table2
 EXCEPTIONS
 OTHERS = 19.
IF sy-subrc = 0.
 istream_type = streamfactory_type->create_istream_itable( table = gw_xml_table2
 size = l_xml_size ).
 document_type = ixml_type->create_document( ).
 parser_type = ixml_type->create_parser( stream_factory = streamfactory_type
 istream = istream_type
 document = document_type ).
 IF parser_type->parse( ) NE 0.
 IF parser_type->num_errors( ) NE 0.
 l_count = parser_type->num_errors( ).
 ENDIF.
 ENDIF.
 CALL METHOD istream_type->close( ).
 CLEAR istream_type.
 node_type = document_type.
 PERFORM yf_get_data USING node_type.
 p_gw_xml_node_ret[] = gw_xml_node[].
 CLEAR gw_xml_node[].
ENDIF.
ENDFORM. " yf_convert_xml_to_itab
*& Form yf_get_data
 text
 -->VALUE(X_NODE) text
FORM yf_get_data USING value(x_node) TYPE REF TO if_ixml_node.
DATA: indent TYPE i.
DATA: ptext TYPE REF TO if_ixml_text.
DATA: string TYPE string.
DATA: temp_string(100).
CASE x_node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
 string = x_node->get_name( ).
 w_nodetext = string.
 CLEAR string.
 string = x_node->get_value( ).
 IF NOT w_nodetext IS INITIAL OR
 NOT string IS INITIAL.
 gs_xml_node-node = w_nodetext.
 gs_xml_node-vlnode = string.
 IF NOT gs_xml_node-vlnode IS INITIAL.
 APPEND gs_xml_node TO gw_xml_node.
 CLEAR gs_xml_node.
 ENDIF.
 ENDIF.
ENDCASE.
Get the next child
x_node = x_node->get_first_child( ).
Recurse
WHILE NOT x_node IS INITIAL.
 PERFORM yf_get_data USING x_node.
 x_node = x_node->get_next( ).
ENDWHILE.
ENDFORM. "yf_get_data

PBDOM : Exporting to XML file gives a single line

I've been starting developing with PowerBuilder 12.5 a few weeks ago. I had to write some XML files, so I got familiar with the PBDOM library.
I can build a lot of different things, it's very nice, but one thing still bothers me :
In the output file, the whole XML is written on a single line.
I use the SaveDocument function.
For example, here is some code :
PBDOM_Document doc
PBDOM_Element noderoot, node1, node11, node12
doc = CREATE PBDOM_Document
doc.NewDocument("NodeRoot")
noderoot = doc.GetRootElement()
node1 = CREATE PBDOM_Element
node1.SetName("Node1")
noderoot.AddContent(node1)
node1.SetAttribute("Attr", "AttrValue")
node11 = CREATE PBDOM_Element
node11.SetName("Node11")
node11.AddContent("Here is a value")
node1.AddContent(node11)
node12 = CREATE PBDOM_ELEMENT
node12.SetName("Node12")
node12.AddContent("Here is another value")
node1.AddContent(node12)
doc.SaveDocument("myDoc.xml")
Here is the result when I open it with notepad++
<NodeRoot><Node1 Attr="AttrValue"><Node11>Here is a value</Node11><Node12>Here is another value</Node12></Node1></NodeRoot>
Whereas I wanted :
<NodeRoot> <Node1 Attr="AttrValue"> <Node11>Here is a value</Node11> <Node12>Here is another value</Node12> </Node1> </NodeRoot>
With the notepad++ XML tools plugin, I can use the "pretty print" function to get this nice representation. But I would like my file to be formatted this way from the beginning. I noticed that the "line ending" was set to UNIX format (indicator on bottom right of the window), but I'm working on Windows. When I use the menu to convert it to Windows format (CR+LF), it changes this indicator, but the code stays on one single line.
Is there a way to tell PBDOM to export the XML file with a nice output ?
Thank you !
Notes :
- Opening the XML file with Internet Explorer or Google Chrome gives me a nice vizualisation, with indentation, line breaks...
- Adding a <?xml version="1.0" encoding="ISO-8859-1" ?> does not help (I've been doing it while exporting some more complex files, but I still get the output on one line...)

Here is a very simple powerbuilder example. It uses MSXML instead of PBDOM. See my comments for hints how to use it with PBDOM.
oleobject lole_dom, lole_root, lole_element1, lole_element11, lole_element12
oleobject lole_Writer, lole_saxreader
string ls_result
// build DOM (you don't need this if you use PBDOM)
lole_dom = create oleobject
lole_dom.ConnectToNewObject ("Msxml2.DOMDocument")
lole_root = lole_dom.CreateElement ("NodeRoot")
lole_dom.documentElement = lole_root
lole_element1 = lole_dom.CreateElement("Node1")
lole_root.AppendChild(lole_element1)
lole_element1.SetAttribute("Attr", "AttrValue")
lole_element11 = lole_dom.CreateElement("Node11")
lole_element11.AppendChild (lole_dom.CreateTextNode("Here is a value"))
lole_element1.AppendChild(lole_element11)
lole_element12 = lole_dom.CreateElement("Node12")
lole_element12.AppendChild (lole_dom.CreateTextNode("Here is another value"))
lole_element1.AppendChild(lole_element12)
// this saves the DOM without formatting
//lole_dom.save ("d:\testxml.xml")
// this part is for formating
lole_Writer = create oleobject
lole_saxreader = create oleobject
lole_Writer.ConnectToNewObject ("MSXML2.MXXMLWriter")
lole_saxreader.ConnectToNewObject ("MSXML2.SAXXMLReader")
lole_Writer.omitXMLDeclaration = True
lole_Writer.indent = True
lole_saxreader.contentHandler = lole_Writer
// instead of DOM you can also put a XML string to parser: lole_saxreader.parse ("<node>...</node>")
// so you can also use the PBDOM output directly
lole_saxreader.parse (lole_dom)
// here is your formatted output
ls_Result = lole_Writer.output
MessageBox ("", ls_result)
lole_writer.Disconnectobject( )
lole_saxreader.Disconnectobject( )
lole_dom.Disconnectobject( )
DESTROY lole_writer
DESTROY lole_saxreader
DESTROY lole_dom

Xml file read in a single line

HI All,
I have configured a scenario FILE-FILE to generate a XML file as output(input also xml file). It has created xml file successfully, and this file is transferred from ECC5.0 to 4.7. In 4.7 this xml file is read by a particular program in which it is reading the entire file as a single line. This means that its not detecting end of line.
How can I resolve this??
Plz suggest.
rgds,
anil

Hi Satish,
If I understand, the program needs to read an xml file as a single line. If so, look at Michal weblog /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
With this simple xslt program you can put a whole xml file into a string. If you also need the inverse, string to xml, looks at the Henrique Pinto reply on bottom of weblog
To use XSLT programs you have 2 options:
XSLT-ABAP Engine -> /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
Or you can paste the xslt code in a txt file, zip the file and import it to XI as Imported Archives.
Hope it helps you
Ricardo.
Message was edited by: Ricardo Quintino

Converting strings with line feeds to a single line with identifying chars

Hi, I dont want to re invent the wheel if there is something out there that does this already. I want to take some string with multiple
line feeds and convert it to a single line. For example:
"I want this string
to be changed to
a single line"
to this...
"I want this string\r\n to be changed tor\\n a single line"

vsekvsek wrote:
OK, Hope this will make better sense. So right now a I have a routine that loads files like below:
"TEST\r\n TEST1\R\n TEST2"It's not clear to me at this point what you mean by that string.
After the initial word TEST, does that string have a backslash character followed by an r followed by another backslash followed by an n? Or does it have a carriage return followed by a line feed. (\r followed by \n)
We format it when loading in a way that it will look like this when queriing from the DB
"TEST
TEST1
TEST2"It doesn't look like anything "when querying from the DB." That part doesn't make any sense.
Either the string has a backslash followed by an r, in which case when you render in in a text editor or on a console it will look like a single line with a visible backslash character followed by an r, or it has a carriage return (\r) in which case it will look like multiple lines when rendered in a text editor or on a console.
Later I re-extract it to a file from the DB and What confuses me is when I inspect the string it looks like this
"TEST\r\n TEST1\R\n TEST2"How are you inspecting it? If it's in a debugger or similar tool, it's not uncommon for it to be showing a carriage return character (\r) as a visible backslash followed by an r, rather than interpreting it and rendering a new line. This is so that you can see exactly what characters are in there, rather than wondering about the specific whitespace.
>
but it extracts to my file like
"TEST
TEST1
TEST2"
So I guess there are some hidden cr's or something messing it up that I need to manipulate but not sure how to apprach it?I still don't know what you're trying to do, or if you even have an actual problem with your data or are simply not understanding what you're seeing.

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

Change of a single line in a text file

Is there a option in CVI to change a single line in a text file (.txt), without reading the whole text file into the buffer and writing the whole buffer back after the editing from the one line?

Not that I am aware of.
I'll be glad to know such a function if somebody can point us to it!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is there some simple setting out there that will just "make it so?"@

The video I am watching this guy is just dragging every line to make curves. And every anchor point is a corner. He is not switching back and forth between the pen and the anchor points tool, and he is not using the convert points tool. He draws a curved line and starts another straight line only to curve it with a click and a drag. It is super efficient, and I could save a world of time if I could figure out what he is doing.

How to find number of lines in an input file.

Hi,
Can someone tell me, if there is a way to find out the number of lines in an input file. I do not want to read line by line and then count the number of lines read.

Then how do you think a program could determine the amount of lines in an input file? How does a human know how many lines are on a page? You're going to have to count the items that separate two lines to know how many lines are in your file.
Either read line by line and count the amount or read char by char and count the number of '\n' occurences instead.
If you have control over writing the input files, however, you can make this better. Write a header in the file that specifies the amount of lines in it. The first line of your file will then hold a number that represents the amount of lines in the file, so you need only read the first line to know how many lines are in your file.

Converting a single line in Input file

Similar Messages

Maybe you are looking for