Converting a vertical gradient to a horizontal gradient

I want to create a rectangle with a horizontal gradient fill. So, I changed solid to gradient and chose linear. However, the orientation of the gradient is vertical. How do I make it horizontal, i e I want the gradient effect to go from left to right.
P. S I tried the bar which appears at the center of the gradient. However that does not produce the effect I am looking for.
Basically Just how to create a horizontal gradient?

The two endpoints on the gradient are different. The diamond changes the starting location of the gradient (outside the gradient line the endpoint colors are used). The square changes the angle of the gradient. It's this one you want to move and swing to be on the same horizontal line as the first one.
On the toolbar, select the gradient tool then click on your object. Move the diamond off the top of the object, then drag the square to be level with the diamond. Holding the shift key wil constrain the line direction to 45 degree changes.

Similar Messages

Horizontal gradients in tables

Haven't had much luck tracking down specific information on this issue, so maybe someone can help.
I've converted text to a table in InD CS3. I want to apply a horizontal gradient to the rows that repeats, so it will go (from top to bottom) dark-light-dark within each row. When I fill the row with my gradient swatch, and then rotate it 90-degrees the gradient will not scale to the height of the row. Rotating will turn the gradient, but appears to be resizing to the size of the whole table, thus only showing part of the gradient.
My solution is to stack up boxes of the gradient behind the table and remove any fill on the rows so the gradient show through. Seems a very inelegant and tedious solution.
Any one have thoughts on this? Can Tables scale gradients to row height and I've just missed a setting somewhere?

Yeah, I'm using the gradient tool to rotate the gradient fill. It's the only way I can see to do it. The cell formatting options in the Table menu only let you specify the fill and tint, not the position. I would think there would be a "Constrain gradient to cell" or some such check box, but no.
To clarify, if I make a box and fill it with the gradient, then rotate the gradient 90-degrees, the gradient scales to the size of the box even if I resize the box, i.e., working as expected. So, there's something about table rows that restricting how the fill behaves.

Screen problems - Horizontal gradient brightness - Satellite R25 Tablet

Hello all
I have some strange problem with my screen. When I use two lowest brightness levels my screen is not constantly bright it has horizontal gradient. Looking from left side I have very dark screen, near middle there is normal brightness, after middle dark again and in the end/right side o screen it's bright.
This anomaly is most notified only on two lowest levels of brightness, when I want to extend my battery life time.
I was replacing my Windows XP but without any positive result.
Does the screen need to be replaced, or is there another way to fix it?

I am afraid it is hardware issue. I cannot say for sure that display is defective but if you bring it to the service technician can test it with special diagnostic tools.
As you can see fresh OS installation didnt help and it cannot be software problem. Sorry but I don't believe there is anything you can do alone to fix it. If possible continue to use display with acceptable brightness level.

Urgent SQL question : how to flip vertical row values to horizontal ?

Hello, Oracle people !
I have an urgent SQL question : (simple for you)
using SELECT statement, how to convert vertical row values to horizontal ?
For example :
(Given result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1
K. Smith ...............1
K. Smith ........................1
(Needed result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1 .......1 .......1
I know you can, just don't remeber how and can't find exactly answer I'm looking for. Probably using some analytic SQL function (CAST OVER, PARTITION BY, etc.)
Please Help !!!
Thanx !
Steve.

scott@ORA92> column vice_president format a30
scott@ORA92> SELECT f.VICE_PRESIDENT, A.DAYS_5, B.DAYS_10, C.DAYS_20, D.DAYS_30, E.DAYS_40
2 FROM   (select t2.*,
3               row_number () over
4                 (partition by vice_president
5                  order by days_5, days_10, days_20, days_30, days_40) rn
6           from   t2) f,
7          (SELECT T2.*,
8               row_number () over (partition by vice_president order by days_5) RN
9           FROM   T2 WHERE DAYS_5 IS NOT NULL) A,
10          (SELECT T2.*,
11               row_number () over (partition by vice_president order by days_10) RN
12           FROM   T2 WHERE DAYS_10 IS NOT NULL) B,
13          (SELECT T2.*,
14               row_number () over (partition by vice_president order by days_20) RN
15           FROM   T2 WHERE DAYS_20 IS NOT NULL) C,
16          (SELECT T2.*,
17               row_number () over (partition by vice_president order by days_30) RN
18           FROM   T2 WHERE DAYS_30 IS NOT NULL) D,
19          (SELECT T2.*,
20               row_number () over (partition by vice_president order by days_40) RN
21           FROM   T2 WHERE DAYS_40 IS NOT NULL) E
22 WHERE f.VICE_PRESIDENT = A.VICE_PRESIDENT (+)
23 AND    f.VICE_PRESIDENT = B.VICE_PRESIDENT (+)
24 AND    f.VICE_PRESIDENT = C.VICE_PRESIDENT (+)
25 AND    f.VICE_PRESIDENT = D.VICE_PRESIDENT (+)
26 AND    f.VICE_PRESIDENT = E.VICE_PRESIDENT (+)
27 AND    f.RN = A.RN (+)
28 AND    f.RN = B.RN (+)
29 AND    f.RN = C.RN (+)
30 AND    f.RN = D.RN (+)
31 AND    f.RN = E.RN (+)
32 and    (a.days_5 is not null
33           or b.days_10 is not null
34           or c.days_20 is not null
35           or d.days_30 is not null
36           or e.days_40 is not null)
37 /
VICE_PRESIDENT                     DAYS_5    DAYS_10    DAYS_20    DAYS_30    DAYS_40
Fedele Mark                                                          35473      35209
Fedele Mark                                                          35479      35258
Schultz Christine                              35700
South John                                                                      35253
Stack Kevin                                    35701      35604      35402      35115
Stack Kevin                                    35705      35635      35415      35156
Stack Kevin                                    35706      35642      35472      35295
Stack Kevin                                    35707      35666      35477
Stack Kevin                                               35667      35480
Stack Kevin                                               35686
Unknown                             35817      35698      35596      35363      35006
Unknown                                        35702      35597      35365      35149
Unknown                                        35724      35599      35370      35155
Unknown                                                   35600      35413      35344
Unknown                                                   35601      35451      35345
Unknown                                                   35602      35467
Unknown                                                   35603      35468
Unknown                                                   35607      35475
Unknown                                                   35643      35508
Unknown                                                   35644
Unknown                                                   35669
Unknown                                                   35684
Walmsley Brian                                 35725      35598
23 rows selected.

When scrolling vertically there is an horizontal line which causes distorsion of the screen. I do not have noticed such concern on my iMac or on my macbook. What happen with the macpro ?

When scrolling vertically there is an horizontal line which causes distorsion of the screen. I do not have noticed such concern on my iMac or on my macbook. What happen with the macpro ?

MacPro bought in 2010
MacBook Pro
MacBookPro7,1
Intel Core 2 Duo
2,4 GHz
Nombre de processeurs :          1
Nombre total de cœurs :          2
Cache de niveau 2 :          3 Mo
Mémoire :          4 Go
Vitesse du bus :          1,07 GHz
Version de la ROM de démarrage :          MBP71.0039.B0B
Version SMC (système) :          1.62f6
Numéro de série (système) :          W804853GATP
UUID du matériel :          716CB476-983B-5C43-B363-988FB608C01C
Capteur de mouvement brusque
État :          Activé
System:
Mac OS X 10.6.7 (10J869)
Darwin 10.7.0
Video DIsplay Card
NVIDIA GeForce 320M :
Jeu de composants :          NVIDIA GeForce 320M
Type :          Processeur graphique (GPU)
Bus :          PCI
VRAM (totale) :          256 Mo
Fournisseur :          NVIDIA (0x10de)
Identifiant du périphérique :          0x08a0
Identifiant de révision :          0x00a2
Révision de la ROM :          3533
Moniteurs :
LCD couleur :
Résolution :          1280 x 800
Profondeur de pixels :          Couleurs 32 bits (ARGB8888)
Miroir :          Activé
État du miroir :          Miroir matériel
Connecté :          Oui
Intégré :          Oui
Is that what you asked ? Do you need other data ?
Note that I have also strong distorison when running slides show with iphoto.
Thanks

Embedded video works vertical orientation but not horizontal

Consistently having problems getting my horizontal orientation to play video.
Works in my vertical format, I adjust the same layout to fit in horizontal and the button
no longer works. Is there something Im missing.
Ive deleted the button and the video and started over and it still doesn't work.
Any suggestions??

I'm having something similar. I use a flv player, so I know
the FLV works.
I've seen or rather captured FLV's from youtube. and
converted them to useful stuff that I didn't need a FLV player for.
Thing is why do the FLV's play on youtube, but not on my
machine without a stand alone flv player ?
What I have is a 16 meg avi/wmv that I can trim to a 2 meg
FLV. That's what I want to put on my web site, and have it play.
What do I need to accomplish this ? I've not done anything
with FLV before.

How do I change vertical menu to a horizontal menu in Dreamweaver CS5?

Doing a website (my first) for a friend of mine. Followed the Adobe tutorial for a lot of it (with Paul Trani) and have everything done but now my friend wants the menu bar to be horizontal instead of vertical. (I have other questions but this is the big one for now) I do have a CSS file that is linked to all 4 pages. I have hunted and searched to no avail. The page started out as a template (2 column fixed, left sidebar, header and footer). I am hoping I just have to paste some code into it and have found a few suggestions on the web but nothing seems to work. I did get it to the point with a list with no bullets with no background but can't get it to go horizontal. Then code started showing up on my design page and I gave up and turned to this forum. I would hate to start over. I do not even see a template that has a horizontal menu on it for one of the choices. Any help would be greatly appreciated.

I think you are confused about how to differentiate between horizontal navigation and vertical navigation.
In HTML, both are exactly the same. You use a list. So both will be just like you describe them:
<ul>
<li><a href="#">Link one</a></li>
<li><a href="#">Link two</a></li>
<li><a href="#">Link three</a></li>
<li><a href="#">Link four</a></li>
</ul>
Now, there's your navigation. Done. So how do we do an horizontal nav? Well we tell web browsers to format our HTML code in a style sheet, called a Cascading Style Sheet, or CSS. So let's give the <ul> a tag that tells the browser that it's not just a simple unordered list; it's special and has to be set up a certain way:
<ul id="nav">
<li><a href="#">Link one</a></li>
<li><a href="#">Link two</a></li>
<li><a href="#">Link three</a></li>
<li><a href="#">Link four</a></li>
</ul>
Now, let's go to our style sheet and create the style for the id "nav." And remember, anything with an ID on a web page must occur only once. If you're going to have several "nav" tags on your page, you have to make a class. The difference (in CSS) between a class and an id is the use of a hash "#" for an id and a dot "." for a class.
So here's the CSS for the horizontal navigation:
#nav {
          width: 100%;
          float: left;
          margin: 0 0 3em 0;
          padding: 0;
          list-style: none;
          background-color: #f2f2f2;
          border-bottom: 1px solid #ccc;
          border-top: 1px solid #ccc;
#nav li {
          float: left;
#nav li a {
          display: block;
          padding: 8px 15px;
          text-decoration: none;
          font-weight: bold;
          color: #069;
          border-right: 1px solid #ccc;
#nav li a:hover {
          color: #c00;
          background-color: #fff;
Here you're floating both the list and the list items left. Floating the list items left is what pulls them into a nice horizontal row, stacking the items from left to right. However, because of how floats behave, the containing list will collapse to a height of zero unless it is also floated left.
And that wouldn’t be a major problem, except the list has a background color and if the list collapses, that background color won't show. This way, it’ll fill up the entire width of the page (or of its container, if it’s in a container with a width set).
Additionally, the only margin you see will be the bottom one, so the list items will make their own margins and behave themselves. The list-style is set to “none,” which removes the bullets.
Now all navigation will certainly be a link, so I style the list items that are links (#nav li a) with padding that will space them out, get rid of the default underline, setting the text decoration to none, making them bold and creating a thin right border. Then I change the color on the nav for a hover.
Now, vertical is the default for a list.
Here's the difference:
You keep list-style: none;
You get rid of your floats.
You get rid of the 100% width, unless you have it corralled in a containing div, like a left or right sidebar.
Boom! you're done.
-Mark

How do you fix the position of an object vertically only ("static" position horizontally)?

I want to fix a "title" bar of a table vertically, but allow it to scroll with the rest of the page content horizontally. At the moment it's position is "fixed" which fixes the position vertically but horizontally too. I would like to have the coloured cells move horizontally with the rest of the table in the case that the browser window is not wide enough.
Can this be done? If so, how?
(this picture shows that the horizontal positions are different - would like them to remain in line with each other)
Sorry if this is a silly question, I've only started using Dreamweaver yesterday... Thank you in advance for any help and advice.

If you want to align your item horizontally center, left or right (along with other website content), you can put that item within a fixed position container, then align the item within the container however you see fit.
<html>
<head>
<title></title>
</head>
<body>
<div id="container" style="position:fixed; top:0px; height:100px; width:100%; border:1px solid orange;">
<div id="item" style="width:300px; margin:auto; border:1px solid black">Some Content</div>
</div>
</body>
</html>
In the simplified example above, the container div is fixed to the top of the page, the item div is also then fixed at the top, however using css, it is centered to the browser window. The border properties are there for illustrative purposes

Spry menu bar - vertical format instead of horizontal

When I inserted the Spry Menu Bar I selected a Horizontal format (instead of Vertical). However, the menu bar appears vertically in the document. I have inserted it on top of the banner (which was inserted as a background image within a table) and is definitely wide enough to accommodate a horizontal menu bar. I have deleted it and tried a couple of times but still the horizontal selection appears in a vertical format. Any ideas much appreciated.
This is how it appears in code:
<table width="970" border="0">
          <tr>
            <td height="160" class="banner"><ul id="MenuBar1" class="MenuBarHorizontal">
              <li><a href="#">Item 1</a>                </li>
              <li><a href="#">Item 2</a></li>
              <li><a href="#">Item 3</a>                </li>
              <li><a href="#">Item 4</a></li>
              <li><a href="#">Untitled Item</a></li>
            </ul></td>
          </tr>
          </table>

Make sure that you have saved the Spry Assets that go along with the Menubar. I assume that you have, but this menubar is a simple list without its assets.
Also make sure that you have not inadvertently indicated the Vertical menubar. I assume that you have not.
When you delete and re-insert a Spry Widget, make sure that you do it by clicking anywhere in the Widget on the Document Window and then clicking on the blue widget tab. Then press delete, and all evidence of the Widget will go from your page. I find that manually editing does not always 'clean up' after disabling a Widget.
If you can post the page live somewhere, we can give you a better answer.
Z

How do i change the mail preview in Lion from a vertical read to a horizontal read

I just switched from Snow leopard to Lion and i don't like the way that Lion has the mail preview set up as a 3 column vertical format. I thought in Snow Leopard you could change the set-up so it's either horizontal or vertical, but I can't seem to find that option in Lion. I want to have the list of my email messages in the top, horizontal window and the preview of the selected message in a horizontal window below. Am I missing this option to change the view format from vertical to horizontal somewhere?

Thank you this solved my problem also... i feel like a duffus for not figuring it out onmy own but who cares I can now get back to work instead of focalising on this... YEAH !

Crop a vertical out of a horizontal image in Aperture

Trying Aperture for first time and I have a horizontal image I want to crop a vertical out of. Only let's me do a horizontal. Searched the internet and can't find an answer. Thanks

Kirby is referring to this on the crop window:
Vertical
Horizontal

Datagrid: Vertical Rows instead of Horizontal Rows

Hi,
Usually, inside a datagrid there are rows and columns.
The rows shows ex. one product for each line. Each product has some properties like number, color, weight,...
What we wanted to do is not to show one product per line, but 1 product per column: --> see the example
Normal Datagrid:
Number            Description          Color           Weight   ...
1                     Product 1             red              10 kg
2                     Product 2             green           15 kg
3                     Product 3             blue             5 kg
What we want is:
Number           1                   2                     3
Description      Product 1       Product 2        Product 3
Color               red                green              blue
Weight            10 kg             15 kg              5 kg
Possible to do with standard Flex SDK?
Did anyone write such a component already with Flex 3 or Flex 4?
Thanks for any help on that issue.

A pivot table is something else...
To change the datasource is possible, but the result is not what is correct.
cause:
- The selection of one product must be a vertical selection, and not a horizontal one.
- The column header must be at the left side, and not at the top!
But yes, sure, everything is possible to develop....
thanks anyway :-)

Thumbnail vertical, but larger photo horizontal!! how?

When I rotate the thumbnail from vertical to horizontal the enlarged photo is then the correct way up, but thumbnails are now the wrong way up!!
This is only happening with about 30 photos in a batch of 200.
They were shot on a Canon 30D SLR, with auto rotate on.
thanks for any suggestions,
Kevin

Open the "Horizontal Axis Properties" and change "Interval" from "Auto" (default) to "1" to get all values.
Olaf Helper
[ Blog] [ Xing] [ MVP]

My facebook icons won't show in messenger app for my ipad when my screen is vertical but will in horizontal how do I solve this please

I have messenger for facebook and my images and emojis will only show when my iPad Air screen is horizontal and won't show when horizontal when I message someone how do I solve this please but my emojis still show on my keyboard with the globe icon thank you

HI,
Did you ever figure out how to get them back? The same thing happened to me yesterday. I was able to open the file in VLC media player (you can download this app), but the file had been corrupted. It was only the last clip I had recorded, all the others were lost. Even the clip that will play is messed up

Vertical multi-page spread (horizontal spine)

Multi-page spreads are usually arranged horizontally.
I'm producing a A5 landscape booklet, with the spine on the long side (horizontal spine, like a calendar).
How do i keep two pages together, in a way that it results in a portrait A4 on my screen? Using InDesign CS5.

Make a spread with two pages.
Don't allow the selected spread to shuffle in the page window.
Now go to the page tool (shift p). Pick up a page with this page tool and give it a new position on your screen, so that the spine will be horizontal.
That's it. Does it work?

Converting a vertical gradient to a horizontal gradient

Similar Messages

Maybe you are looking for