Converting an AP to LWAPP using WCS

HI,
I am trying to migrate from an AP via the WCS and handed me the following log
START: Detailed logging started at -> 09.21.2010_19.12.09
INFO: TELNET to device 172.16.53.103 done.
INFO: Privilege level is equal to 15.
INFO: Setting vty line completed.
INFO: Dumped Environmental variables.
INFO: AP is supported for Upgrade process
INFO: IOS version is greater than or equal to 12.3(7)JA.
INFO: AP has MIC installed already.
INFO: Station role is root.
INFO: DNS and Domain name configured.
INFO: Mac address of device is 00:23:33:97:74:62
INFO: Completed Dot11Radio0 shutting.
INFO: Device set up done and time configured on device.
INFO: Run-config dumped.
INFO: Gateway 172.16.53.1
INFO: Hostname HotelC4
INFO: Dumped Environmental variables.
INFO: Starts loading recovery image, takes time based on link speed.
ERROR: Device Response :: examining image...
%Error opening (Permission denied)archive download: takes 0 seconds
ERROR: Image Loading FAILURE.
INFO: Un-shut radio 1 done.
END: Migration Process Failure: Image Loading Failure.
The AP is a 1121 and I have the IOS file-C1100-rcvk9w8 tar.124-21a.JA2
tftp server field put the ip address of my PC
in the field file path C:/
in the field file C1100-rcvk9w8 tar.124-21a.JA2
please help need to know that I'm doing wrong step
regards
AD

Estimate, has the following characteristics AP1121
00:23:33:97:74:62
172.16.53.103
802.11b/g
Unassigned
N/A
0
Enabled
N/A
Up
Versions
Software Version
12.3(8)JEB
Inventory Information
AP Type
Autonomous
AP Model
AIR-AP1121G-A-K9
H-REAP Mode Supported
No
Unique Device Identifier (UDI)
Name
AP1100
Description
Cisco Aironet 1100 Series (IEEE 802.11g) Access Point
Product Id
AIR-AP1121G-A-K9
Version Id
V04
Serial Number
FTX1315V08Q
regards

Similar Messages

How do I convert an MP3 file to use it as a ringtone on my iPhone 3G?

How do I convert an MP3 file to use it as a ringtone on my iPhone 3G?

Andrew J wrote:
Everybody's wrong wrong wrong. You don't need garageband. Select the song, go to info. You need to select a start and stop time for the song that can't be any longer than 40 seconds in length. Then in advanced mode you convert the song to acc. once done locate the file on the computer. it should end in .m4a . Change the a to an r so it reads .m4r Drag the file to the desktop, double click and it ends up in ringtones folder.
That's it! Works every time. Or for those who want easier:
http://www.ambrosiasw.com/utilities/iToner/
My drug of choice.

I am in Greece, do i need a power converter or can i just use a plug adaptor to charge my macbook pro?

I am in Greece, do i need a power converter or can i just use a plug adaptor to charge my macbook pro?

If you are using the included Apple charger, you will simply need a plug adapter.

Not able to convert word file to PDF using Adobe Acrobat 9 Standard

Hi,
I am not able to convert word file to PDF using Adobe Acrobat 9 Standard. When I try to convert, it starts the process and in between I am getting this prompt, as shown in figure below and the conversion process stops. The PDF is not created.
Note: The filename 'Acr85.doc' in the above prompt keeps changing and is random.
I tried clicking Yes, No and Cancel on the above prompt, but the conversion process just stops and PDF is not getting generated.
I am able to create PDFs from web pages. No issues with that. Not working only with Word.
Can someone help me with this.
Thanks,
Vinay Jaassiel Kankipati
Technical Writer

In MSWord please changes the settings as "Adobe PDF" menu => "Change Conversion Settings" goto Tab Bookmark and clicks the option Convert Word Bookmarks. Now you convert the Doc to PDF you can achieve the Bookmark.
Hope this help you
Sudhakar

TS1859 I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

hi
download perian from internet, it'll solve your issue.

Error converting web page to PDF using Acrobat 8 IE 9 on Vista

I am getting the following errow when I try converting web page to PDF using Acrobat 8 on IE 9 on Vista. This worked previously but it appears that a recent update to Acrobat caused issues with this functionality. This happened once before and after some troubleshooting the technician wasable to get the functionality working again. The Adobe printer shows up with "Error" however I can still create PDFs from outlook.
Error Has Occurred
Line:11
Char:3
Error: Permission Denied
Code: 0
URL:res//C:\Program Files\Adobe\Acrobat 8.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html

Is the plugig the same as an add-on because all of my Acrobat Add-ons are active?
Name                Adobe PDF
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.25 s
Name                Adobe PDF Reader Link Helper
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.01 s
Navigation time     0.00 s
Name                Adobe PDF Conversion Toolbar Helper
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.06 s
Navigation time     0.00 s
Name                Adobe PDF
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.00 s

How do I convert .pdf into searchable OCR using Adobe Acrobat Capture 3.0?

How do I convert .pdf into searchable OCR using Adobe Acrobat
Capture 3.0?
Our division is digitizing it's files, and we've been using
Adobe Acrobat 5.0 (2). We've 'scanned-in' several hundred
documents, but they have been saved as .pdf files (which are
currently not 'searchable', as they are only scanned images).
We just received the Adobe Acrobat Capture 3.0 program, and
we were told that we would be able to scan-in any new documents and
save them both as .pdf and OCR documents (Optical Character
Recognition). Therefore, we were told, we would be able to search
through the body of the document, using OCR, and not just through
the document filename, as we had been doing before.
HOWEVER, we don't know how to use this new OCRing program.
Also, we don't know how to convert the .pdf documents which we've
already scanned into OCR recognizable documents.
Is someone able to assist us here in this forum?
Merci beaucoup / Shokran jazilan / Thank you very much!
- Michael Kim Jamal Riegelman
United Nations Headquarters
Department of Peacekeeping Operations
Europe and Latin America Division
Office: (917) 367.9186
Email: [email protected]

Hi Michael
Unfortunately I believe you have posted your issue in the
wrong forum. I believe you are looking for the forum linked below.
http://www.adobeforums.com/cgi-bin/webx/.ef7cbdf/
You might try re-posting your issue there.
Cheers and good luck! Rick

Converting .docx to a pdf using Acrobat X, it says file type unsupported.

Please Help! When I try to convert to convert my .docX to pdf using Acrobat Pro X, it says file type unsupported.
When I use "save as" "pdf" in Word, it allows me to save the file as a pdf, but then the URL links in the resulting pdf will not work. They all say page not found. (The url links work in the Word document.)
I am using a Macbook pro, 10.6.8; Microsoft Word 2008 for Mac; and Acrobat Pro X
Any help, greatly appreciated.

Hello, thank you for responding.
Yes the url links start with http:
For example when I type in
http://canberracontemporaryartspace.wordpress.com/2013/07/06/staying-out-of-trouble/
in the word document and click on it, the link works; but when I save it as a pdf it says "not found"
And then when I type in
http://www.camberwellspecialists.com.au/what-is-skin-cancer.html
in the word document and click on it, the link works; but when I save it as a pdf it says "page not found"

Func module to convert list to pdf without using memory id

hi Experts,
Is there any funct module to convert list to pdf without using memory, as I am using Convert_to_PDF func module which outputs last page only when its running in Background.
But my req is to output all the Pages in the PDF format.
Sample code also appreciable,
Reward Points are guranteed..
Cheers
Santosh

Check the below postings :
Re: Convert spool to pdf
Convert a spooljob to a writeprotected PDF
Hope this will helpful

How can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
What you can do is use one of Adobe's online subscription services. Two provide for PDF to Word export.
There's ExportPDF and PDF Pack.
Be well...

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

Thanks for the quick help. I do have to leave for work. When I try to
download the images from the camera they seem to only be in jpeg (I don't
see any rw2 or raw files to download). If I select the jpeg file it seems
to only download a jpeg file. I do understand that I do have the option to
open the jpeg in RAW. In doing this, is all the extra information included
in the RAW file there or is it lost coming from the camera
Once again thank you for trying to make me understand how this works.
Have a great day.
On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

Is quality better with software for converting VHS to DVD than using an actual converter?

Is quality better with software for converting VHS to DVD than using an actual converter?

Not sure what you mean by "actual converter".
If you mean if you just played a VHS tape to a DVD recorder and recorded like that... You will get close to the quality of the VHS.
If you have a good capture software and hardware you might be able to clean the video and audio up. But VHS is pretty limited in quality.

Convert SPList Items to PDF using iTextSharp

Hi, how can i convert SPList Items to PDF using itextsharp?

hi
in addition to other replies I would like to mention that most natural way to give users possibility to export list item to pdf is to create new context menu command "Export to PDF" (in those context menu which is shown when mouse pointer
hovers the list item) and handler of this command in query string should receive ID of list item, for which user clicked it (it can be implemented as common ASP.Net ashx handler). Then in codebehind handler should open list item using passed id and send fields'
values to itextsharp or any other library you would like to use for exporting to PDF. In order to see how to create PDF documents with itextsharp you should check documentation of this library.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

What database program will convert my Appleworks DB for use on Intel platform?

What database program will convert my Appleworks DB for use on Intel platform?

Yes, you just need the appleworks folder from applications.
However, whether or not this is strictly legal is another question entirely, I'm afraid, unless you are planning to remove appleworks from your computer. You could just buy her her own copy of Appleworks, too.

Batch convert EPS/AI to PNG using Javascript

Hi,
I have lots of eps and ai files which I would like to convert to PNG format. The reason for doing this is to make it easier to find the image that I want instead of opening it one by one. I know Photoshop can do the conversion but limited to JPG, PSD and TIFF only. The filesize also will be so huge and the image quality is not sharp.
One of the preset scripts for Adobe CS3 is SaveDocsAsPDF. I tried using this and then convert the PDF to PNG using Acrobat. I would required too much time to do it. I think there might be a better way to achieve the same result.
I am not a programmer and cant figure out how to tweak the SaveDocsAsPDF script and become SaveDocsAsPNG script.
It would be great if I can just select the folder and all the conversion will be done in the backgroud.
Anyone can help me?
Thanks

ADOBE SYSTEMS INCORPORATED
Copyright 2005 Adobe Systems Incorporated
All Rights Reserved
NOTICE: Adobe permits you to use, modify, and
distribute this file in accordance with the terms
of the Adobe license agreement accompanying it.
If you have received this file from a source
other than Adobe, then your use, modification,
or distribution of it requires the prior
written permission of Adobe.
ExportDocsAsPNG24.js
DESCRIPTION
This sample gets files specified by the user from the
selected folder and batch processes them and saves them
as PDFs in the user desired destination with the same
file name.
// Main Code [Execution of script begins here]
// uncomment to suppress Illustrator warning dialogs
// app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pngExportOpts;
// Select the source folder.
sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files you want to convert to PNG', '~' );
// If a valid folder is selected
if ( sourceFolder != null )
    files = new Array();
    fileType = prompt( 'Select type of Illustrator files to you want to process. Eg: *.ai', ' ' );
    // Get all files matching the pattern
    files = sourceFolder.getFiles( fileType );
    if ( files.length > 0 )
        // Get the destination to save the files
        destFolder = Folder.selectDialog( 'Select the folder where you want to save the converted PNG files.', '~' );
        for ( i = 0; i < files.length; i++ )
            sourceDoc = app.open(files[i]); // returns the document object
            // Call function getNewName to get the name and file to save the png
            targetFile = getNewName();
            // Call function getPNGOptions get the PNGExportOptions for the files
            pngExportOpts = getPNGOptions();
            // Export as PNG
            sourceDoc.exportFile( targetFile, ExportType.PNG24, pngExportOpts );
            sourceDoc.close(SaveOptions.DONOTSAVECHANGES);
        alert( 'Files are saved as PNG in ' + destFolder );
    else
        alert( 'No matching files found' );
getNewName: Function to get the new file name. The primary
name is the same as the source file.
function getNewName()
    var ext, docName, newName, saveInFile, docName;
    docName = sourceDoc.name;
    ext = '.png'; // new extension for png file
    newName = "";
    for ( var i = 0 ; docName[i] != "." ; i++ )
        newName += docName[i];
    newName += ext; // full png name of the file
    // Create a file object to save the png
    saveInFile = new File( destFolder + '/' + newName );
    return saveInFile;
getPNGOptions: Function to set the PNG saving options of the
files using the PDFSaveOptions object.
function getPNGOptions()
    // Create the PDFSaveOptions object to set the PDF options
    var pngExportOpts = new ExportOptionsPNG24();
    // Setting PNGExportOptions properties. Please see the JavaScript Reference
    // for a description of these properties.
    pngExportOpts.antiAliasing = true;
    pngExportOpts.artBoardClipping = true;
    //pngExportOpts.horizontalScale = 100.0;
    //pngExportOpts.matte = true;
    //pngExportOpts.matteColor = 0, 0, 0;
    pngExportOpts.saveAsHTML = false;
    pngExportOpts.transparency = false;
    //pngExportOpts.verticalScale = 100.0;
    return pngExportOpts;
Copy the above and paste into a text editor or the ESTK and save (from the text editor be sure to save as plain text). Place it into HD/Applications/Adobe Illustrator CS6/Presets/en_US/Scripts. Restart AI.

Converting an AP to LWAPP using WCS

Similar Messages

Maybe you are looking for