Converting an NTSC DVD to PAL DVD

Does anybody have any idea how you'd go about changing
an NTSC DVD into a PAL DVD? It's not copyrighted, and
the conversion doesn't have to happen in DVDSP.
It can be done with Toast or other software.
I'd be interested in what you think is the easiest way?
Thanks.

Hi Brvideo
I had a similar query a couple of weeks ago.
The link is here..
http://discussions.info.apple.com/webx128@@.68ba3040
(Oct 02 2005). The advice from Houghts in this thread was bang on - it worked brilliantly.
Additionally as mentioned in the original query - the shareware mpeg2works is also supposed to be able to do this. I can't say one way or the other as I haven't used it but you'll see at the mpeg2works forum on their own website that in some cases it hasn't worked so well.
The QT DV/MpegStreamClip method certainly worked well for me and the quality was surprisingly good. Good Luck with it.

Similar Messages

How to convert my NTSC project to PAL?

Hi! I'd like know how i can convert my ntsc project into PAL.
I need finish a DVD for my client take to ANGOLA and there is PAL system.It is possible? My Encore is 2.0.
Or It is possible put my NTSC movie into PAL project and let encore transcode the movie? Thank you very much and sorry my english.

You have several options.
1 - Create a new PAL project in Premiere Pro. Capture your footage in the usual manner, and as soon as it is in the project, hit the ENTER key to render it.
2 - Create an NTSC project in Premiere Pro, capture to NTSC DV footage, and export it out again.
Close project.
Create new PAL project, import the NTSC clip & then interpret/conform the footage to the project settings.
3 - Set up an NTSC project, capture footage, export to PAL DV or MPEG-2 from Premiere.
4 - Use TMPGEnc Xpress 4 - it's standards conversion is very good.
5 - Use ProCoder, as Ruud suggests
6 - Use CCE SP if you have it.
I'd try as many different ways as you can, and view the lot to see what looks the best.

Can Compressor convert my NTSC video to PAL?

I am trying to convert my NTSC footage to PAL. I was given a tip that the key is in the compressing stage and then use Studio Pro and burn a PAL DVD. Is this correct?
Thanks so much!!!! it really helps!!!

i saw you on the other forum.., you got fobbed off to this one.., actually you can 'convert' to PAL in both DVD Pro and Compressor..,
if you can use either at all you already know it.., do you know where the settings are in compressor.., (is your compressor working??).., an you load settings and assign a sourse and a destination.., if you ca do those things you can already 'convert.'
what ever, assuming compressor is working on your puter, open compressor and save a project name (give the project a name.) now in the
hit 'add file' (the icon, top left)
go to the settings/destination window (the window that covers the bottom left of your screen)
click the triangle that says 'apple'
click the triangle that says 'DVD best quality 120 minutes (if thats how long you want it.., as long as your movie is under this time your OK)'
drag that setting to the long strip in the window above (top right), check the sourse so you know where the file is going.
look in the inspector window and click the icon, second from the right, this is your encoding settings.
click, video format; change the setting to PAL.., check the frame rate has changed to 25fps
back at the window, top right, you will see 'submit.'.., hit that and it will send the job to the render window.., watch the magic
the same can be done from the inspector in DVD pro.
if this was too confusing, sorry, .., there must be some tuts somewhere.., try 'larry jordons' web site, or maybe 'peachpit.com'..??
M:)

Final Cut Pro X how do you convert HD NTSC to SD PAL DVD

Aloha,
I have edited a video and wanting to export to PAL SD DVD. The video was shoot in NTSC HD and edited in the same format. When I select share / DVD I do not see the option to select export to PAL. I always export to SD DVD's but they default to NTSC so I never gave it much though until today....
Please advise and thanks!
Frederick

Aloha Tom,
Thanks for your feedback. I will give it a try and see if the clients have any problems playing the DVD. I have read a post that indicated PAL players can play NTSC DVD's, which is great!
I also wanted to be 100% sure that FCPX DOES NOT have the option to do this and you made it perfectly clear.
Thank you,
Frederick

Converting HD NTSC to HD PAL

Hi!
I have a 5 minute video that was created in HD (1920X1080) and it is in NTSC (29.97fps) and I need to get it to the UK for their local use. Is there anyway that I can out put directly in FCP from NTSC to PAL or can I use Compressor to do it? If so how? If not what applications or process can I go about getting it converted?
Thank you.
Kelvin

your best bet is to take it to a facilities house that have dedicated standards conversion hardware
if you can't stretch to that then the Natress Standards Conversion plugins do an excellent job
if you have no budget at all then Compressor also does an excellent job if somewhat slowly
failing that then yes, you can export a PAL copy using Export > Quicktime Conversion (but it won't be particularly pretty)
i beleive the freeware JES Deinteracer also claims to do a good job of standards conversion ... i have no experience of using it for such, and do not know if it offers any advantage over the quicktime conversion method, but you may wish to try it

Will PAL dvd player play my NTSC DVD-r?

I'm trying to figure out if I need to convert several NTSC dvd's into PAL format to send to a friend's mom in Israel (she's very sick and would like to see these soon).
Since I've never converted between these formats, I've been doing lots of research and keep getting more confused. I downloaded JES Deinterlacer (i think thats what its called) but I'm not sure I need it since I read the following on an imovie FAQ website:
"I have an NTSC project and want a PAL DVD.
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so."
Could this be true? Can I really just send the NTSC dvd's to her? I hate to waste time here...please help...
Thanks so much in advance.
Jenny

That´s right; NTSC DVDs will always work on PAL players when the player is compliant to the DVD specs. Those players do give out the regular NTSC signal and/or convert to PAL60. Some players can even convert to PAL50. The problem is the TV set.
My German TV is 14 years old and cannot handle PAL60 or NTSC; I would need one of those rare players that convert to PAL50 (usually with poor results).
But NTSC DVDs will always work on a PC (when it is an all-region DVD).

"PAL" HDV to NTSC DVD

Wondering if I can go directly from "PAL" HDV (only PAL in the sense that it's 25fps) to NTC m2v (and ac3 obviously) using compressor with as much quality as possible? I usually do standards conversion within fcp using Natresses plug in, but wondering if this is a viable workflow and whether I should adjust the resizing and retiming controls in the compressor presets for maximum quality.

thanks RedTruck, i will try this!
quick question:
is JES deinterlacer the best way to convert the NTSC HDV to PAL HDV (or 1080/60i to 1080/50i)?
client also now wants this on PAL digibeta, so i'm thinking maybe the easiest way of doing all this is getting everything to 1080/50i HDV PAL, exporting via the camera back to HDV tape then taking the HDV tape to a dub house and have it downconverted there to DigiBeta. from that, reimport as SD PAL to make the PAL DVDs. how does this sound?

DV-NTSC Project to PAL DVD

Here is what I intend to do:
Create a copy of the project file project_pal.fcp
In project_pal.fcp change easy setting to DV-PAL
Export sequences to quicktime
Use compressor to convert to DVD ready files
Author DVD w/ DVDSP
My questions are:
Where in here to I need to change any additional setting to make the DVD PAL ready? Is there anything in compressor or DVDSP I need to change or will exporting from a PAL project get that done?
Thanks!

Converting from NTSC to PAL is not a trivial bit of transcoding. There are disparate frame rates as well as different frame sizes. You can't just drop in a NTSC file in a PAL timeline and get good results.
There are three good ways to do it.
1. Purchase and use Graeme Nattress's Standards Convert plug in to convert the NTSC timeline to PAL on export within FCP.
or
2. Use Compressor's Advanced features to convert the exported NTSC file to PAL.
or
3. Take the file to a post house that can do a hardware based standard conversion.
Once you have the file in a PAL format, author a PAL disk and burn it within DVDSP.
Of course, the disk should be region free.
x

Help - NTSC Anamorphic to PAL Anamorphic ...?

I have NTSC footage which I export with the settings below and which work fine.
My question is about PAL export. What settings do I used for PAL
in terms of frame rate, canvas size etc etc...?
Unfortunately I have no PAL monitor so can't test it. :s

You need to convert from NTSC standard to PAL.
The cheapest way is using Compressor, take a look at the article below:
http://www.macworld.com/article/49306/2006/02/marchcreate.html
However, a great solution is [Nattress|http://www.nattress.com/Products/standardsconversion/standardsconvers ion.htm]

NTSC DVD doc for PAL Europe. Updated Advice on IF I need to convert & HOW?

I have read with interests several posts on playing NTSC, all region DVDs on PAL DVD players. I hope someone may have some updated advice for my situation. In brief, I would like to give out DVD copies to festival goers in France where my Doc will play in April. I thought to produce DVD-Rs on my Mac.
With a film acquired documentary(24fps), transferred to NTSC video (29.97 fps) sitting as both Avid and Final Cut Pro Media on my trusty G-4, I am now ready to export a Quicktime Movie and then encode to MPEG-2, and "author" a DVD in DVD Studio Pro.
Will an NTSC DVD now play on most DVD players and Televisions in Europe? (A contact stated their "players are bi-standard NTSC and PAL", but I'm still uncertain this means my DVD-R or replicated NTSC will play).
Should I make a PAL DVD?
IF I try a PAL DVD is it really as simple as exporting a Same as Source Quick Time Movie from Avid or FCP then using the QT MPEG-2 exporter and selecting "PAL" from within Quick Time? Then I just create a new Pal project in DVD Studio Pro?...... Even if it is that simple to create PAL from QT and my media, I don't see how my 24 fps/29.97 fps doc now magically becomes PAL 25 fps / 59.97 fps just because I converted it to MPEG-2.
Do you all recommend I try to make my own PAL DVD or should I just take my already authored NTSC DVDs and cross my fingers.
I really appreciate any newer thoughts on this topic. I'm an old pre-digital film guy so be kind.
Thanks, Rob
G-4 Quicksilver Mac OS X (10.3.9)

Yes, although the vast majority of newer European DVD players and TVs have no problems with NTSC DVDs, the only way to be sure (well, almost sure) is to burn a PAL DVD. You can't legislate for the fact, however, that not all DVD players can play all DVD-R authored disks, but that's a seperate problem!
I generally use After Effects for quick and dirty (but good quality) standards conversion. Whatever you do don't just try exporting your project via Quicktime using a PAL as this will only change the colour space and not the frame rate or frame size. If you use QT to change frame rate it will simply repeat every fifth frame to get to 30fps which will give you jerky motion.
Here's a step by step guide to doing the conversion in Compressor 2, using "optical flow" to interpolate to get the extra frames :
http://www.macworld.com/2006/02/secrets/marchcreate/index.php?pf=1

NTSC DVD created with iMovie 6.0.3. Need to convert to PAL.

Is there a way to do this without starting over? Can I switch iMovie from NTSC to PAL? Can I take my iMovie NTSC project and copy it to a new iMovie window after switching the preferences to PAL? Would that keep chapters in place? Can Toast or something do this? I sure hate to totally start over.

Hi
Please Karsten
b) export your iMovie project; drag the resulting file into a new PAL IDVD project; iDVD will ask you to keep or change the standard
IS NO GOOD WAY at all - It works but resulting DVD is barely viewable ! (jumpy, un-sharp and really bad)
a) is an excellent choice as long as TV is fairly modern - else result will be Bl/W
My notes on this:
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Converting ntsc dvd to pal for web

hi , i am based in uk and I have a dvd that apparently is ntsc as it plays in my dvd player and says ntsc region, it plays on the computer to.
I want to take small segments from it to convert to web format , add titles etc and upload to youtube.\
trouble is i cant rip the files to use in final cut pro, tried media streamclip but that produces jerky unusable files with random drop out and colours
I then thought play it realtime into fcp , it will play going by a firewire into capture and i see it but when capturing it stops every few seconds saying there is dropout I unchecked report on droped frames, and abourt on dropout. and capturing without deck control. i then tried to go through my dv camera but that doesnt see the picture only the sound.
I thought I could copy the dvd but it wont work either on my dvd recorder or with toast.
any suggestions how I can do this? does it need converting first if so how?
I am only using a few minutes of at least 90 minutes of footage .
thankyou
ade

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

Can iMOVIE HD convert a PAL DVD to a NTSC DVD?

That was all! Can iMOVIE HD convert a PAL DVD to a NTSC DVD? That's my only question. Thanks.

Hi
A. Commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to conver the PAL DVD to streaming.DV
• I use Roxio Toast™ to do this (There are no free converter)
• MPEG Streamclip (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
Yours Bengt W

Converting and burning DVD from NTSC to PAL

I have created a DVD using iMovie (6.0.2) and iDVD (6.0.2) using NTSC format. I want to share a copy of the DVD with relatives oversees and I have been trying to create/convert a DVD formatted for PAL. I have not had any success!! These are the steps I have used:
1. Under PREFERENCES, I selected 25 fps
2. A message window came up indicating the original iMoive file was converted from 29.97 fps (NTSC) to 25 fps (PAL)
3. I Selected Save As and saved the converted iMovie file at 25 fps as a different file
3. I Opened the Saved iMovie file under iMoive checking that the PREFERENCES was set at 25 fps
4. Export from iMovie (full quality) the movie (I have selected 25 fps under PREFERENCES prior to exporting
5. Import the movie file I just exported and then set the chapter markers and save the new movie in iMovie
6. SHARE the new movie and select iDVD
7. When iDVD opens, I check the PREFERENCEES and it has PAL set in the preferences and also has PAL selected under Poject Info
8. I set up all the themes, fonts, etc. to customize my DVD
9. I then select BURN DVD and I get the following message: "TV Standard Conflict? It seems that we are burning a NTSC movie on a PAL disc. Proceed with burning?
ANY Suggestions or Advice would be greatly appreciated!

Hello Morris,
you do not actually have to convert your iMovie NTSC project to PAL before burning in iDVD. just go to iDVD preferences and select PAL as new standard, then create a new project and import your NTSC iMovie. iDVD will do the standard conversion AND encoding.
the NTSC/PAL conversion done in iDVD, however, doesn't produce the best results - give it a try though, but if you're not satisfied with the DVD's quality, consider getting JES Deinterlacer to do the standard conversion. this software can handle directly the reference movie stored in your project and will output the converted movie to the same location, so when you open your iDVD project, it will be in your media pane
JES Deinterlacer is freeware and you can find it here:
http://www.xs4all.nl/~jeschot/home.html
hope this helps
mish

Convert Compact Camera NTSC Video to PAL DVD

Hi All,
I am trying to take video footage from my compact Canon digital stills camera, which is 640 x 420, 30fps AVI, and make it useable for a PAL DVD. I use FCP for my editing and normally DVDSP for DVD creation. In FCP, as I normally edit in PAL, the footage from my camera looked jerky, presumably as the frame rates were mismatched. I discovered that the preset NTSC 48k seemed to match it perfectly - frame size and rate, no jerkiness or disortion of the image.
The workflow from then on is pretty straightforward if I want to creat a NTSC DVD, but I was wondering if I can do anything to make it play correctly on a PAL DVD?
I have tried changing the frame rate and size/ratio in FCP to that of PAL before output - jerky result.
I have exported as a full res QT movie using the current project settings in FCP, but then can't use a NTSC file in a PAL DVDSP project
I then exported as a full res QT movie using project settings in FCP, created a new iDVD project in PAL, added my QT export, converted it in the program (why can't DVDSP do this??) and burned it. But when played back in a DVD player, the jerkiness is back.
I have discovered a way in Compressor that does an ok job of converting it, but it takes ages to render out even a short piece.
Is there an easier, less time consuming way that gives good results?

Hi,
First of all, almost all PAL DVD players have no problem playing NTSC DVD's so staying in NTSC would probably be ok.
Are you converting your media before importing into FCP, I don't know the format of the media your camera shoots but It won't be a format that works very well in FCP, you'll have problems.
If you really want to convert to PAL, Compressor will do that and someone familiar with the workflow may chip in. Good Luck.
DM

Converting an NTSC DVD to PAL DVD

Similar Messages

Maybe you are looking for