Converting audio to midi

I want to convert audio to midi.
I know the Melodyne plugin does this...but is there any other way? Can it be done in Logic 9?
Thanks in advance from a potential L9 buyer.
Chris

Thought I'd show what you can do with Melodyne cre8.
http://www.digimixstudios.net/bassToMidi/
Single note bass lines work great, but once you have the midi file in Logic, you can create chords or anything else you need in your bass midi track.

Similar Messages

Does Anyone Or Does Everyone Except Me Know How To Convert Audio To MIDI?

Hello. I'm your new neighbor... I'll be good in the hood... I've been using Logic for 3 years. I have been mixing 14 Tracks of Audio ever since... Never again. No, never, ever, ever, ever again! Ever!
Two questions: Can Logic Pro 7 "Convert" Audio into MIDI? If not will you kindly impart knowledge to Grasshopper which "Software" is widely accepted as the best?
I'll check with Sound On Sound if no one has info here... Thanks.

Does it usually take a long time for Replys? I once asked a simple question in a Recording Studio Forum and waited 20 minutes and said: "This *****, I'm outta here" I returned a year later and found 50 messages saying how impatient I was and even a few kicks in my iAss.
I was a real newbie. More dollars than sense... Avalon, SPL, T.C. Elec... blah-blah. "I'll 'Master my own stuff!" So, I wanted to use the Hardware to "soften". Not a peep! Hello-o-o-o-o-o! All I had was pretty lights glowing.
When I learned the following day, it was only a 'Click' or two away. Usually is with Mac. I love my G5 for Music Production. I've tried 2 PowerBooks an 864(?) and a 1 GHz 17", neither could handle the load of 60 Tracks of Audio. G5, I have increased the Tracks to 78. We're talkin' smokin' trackin' Tracks.
I'll see if I have an answer to:
Does Anyone Or Does Everyone Except Me Know How To Convert Audio To MIDI?
If not I'll slip away quietly and wonder... Does anyone know? I'll return with how to or what to use tomorrow. Then we'll all know!

Best way to convert audio to midi?

Hi.
I am in the process of layering/replacing drums and will need to create midi from some of my drum tracks.
Here is the ways I found so far:
Region to new sampler track:
- Pro: You can use transientmarkers as base for creating midi (which is the way I prefer)
- Con: All velocities gets the same (?)
Drum replacement / Audio to Score:
- Pro: Midi velocities based on the transients
- Con: You can not generate midi based on transientmarkers. You need to use a threshold setting,
which means you get a hard time if you have a lot of "spill" in the track.
So, is the above observations right?
In my dream world I would like to base the midi on transient markers and get velocities based on the transients. Is this possible?
All the best!

You're asking a bit much from automated processes there, I think - I mean, making a sampler instrument could well be a good idea, but you can't expect it to include how you're thinking about it with different velocities like you would with a set of drum samples versus a set of string samples, they're gonna be completely different - that's the bit you have to think about when you're building sampler instruments though, innit ?
There are a few different ways of translating audio to MIDI data - it might work for drums with Logic's own thing - it might need some editing, as well, not difficult but a bit tedious. To me, this is where Melodyne comes into its own.

Convert from AIFF-C audio to midi

I'm looking for a way to convert from AIFF-C format to midi on my Mac, and to use with a music program.
I can import the AIFF-C file into GarageBand, but can't seem to export it in midi format, which surprised me -- is this not supported?
Any ideas?
Thanks!

Thanks for your replies.
I did a bit of research, and see that there are a number of software products out there that claim to convert audio to midi, but I also see that reviewers report mixed results. So before exploring or trying one of these, somewhat blindly, I was hoping to see if there were any options I had missed with Mac software I already own and trust, from GarageBand to QuickTime to Finale's PrintMusic (have I missed anything?).
And if not, then I'm hoping to get more info from Mac users about what you may have tried and what works best. Here are some of the leading options I've tripped across so far, converting to midi from audio formats AIFF-C and mp3 (since I have easy access to the source as well as the ripped versions):
- http://www.widisoft.com/english/download.html
- http://www.bestshareware.net/download/widi-recognition-system-pro.htm
- http://www.computing.net/answers/mac/aiff-to-midi/2549.html
- http://www.mymusictools.com/articles/how-do-i-convert-mp3-to-midi.htm
- http://www.brothersoft.com/downloads/mp3-to-midi-converter.html
- http://www.topshareware.com/mp3-to-midi-converter/downloads/1.htm
... and then I just found this one: http://convert.software.informer.com/download-convert-aiff-to-midi-mac/
If you have any thoughts about any of the above, or other techniques or software that would do the job, I'm all ears!
Thanks!

Convert AIFF-C audio to midi

I'm looking for a way to convert from AIFF-C format to midi on my Mac, and to use with a music program.
I can import the AIFF-C file into GarageBand, but can't seem to export it in midi format, which surprised me -- is this not supported?
Then I wondered if QuickTime could help -- but can't find a way ... anyone else?
Any other ideas?
Thanks!

Hmmmm ... yes, I agree. In my case I have a recording of a multi-piece band backing up 4 vocalists, and want to tease-out the vocal parts. Hard to separate all the instrumental and vocal "voicings"! Now, if I was able to get a good piece of the conversion done through software, I could possibly fill in the gaps through listening carefully ...
I did a bit of research, and see that there are a number of software products out there that claim to convert audio to midi, but I also see that reviewers report mixed results (as you've indicated in your reply). Does anyone have any experience with the following, or any others?:
- http://www.widisoft.com/english/download.html
- http://www.bestshareware.net/download/widi-recognition-system-pro.htm
- http://www.computing.net/answers/mac/aiff-to-midi/2549.html
- http://www.mymusictools.com/articles/how-do-i-convert-mp3-to-midi.htm
- http://www.brothersoft.com/downloads/mp3-to-midi-converter.html
- http://www.topshareware.com/mp3-to-midi-converter/downloads/1.htm
... and then I just found this one: http://convert.software.informer.com/download-convert-aiff-to-midi-mac/
If you have any thoughts about any of the above, or other techniques or software that would do the job, I'm all ears!
Thanks!

Converting Audio files to Midi files.... anyway to do it?

I used to have Opcode Studio Vision Pro and there was an option to convert audio files, like a drum solo or just music, to a midi file so you could take a audio drum pattern and turn it into a midi file and pick your own drum sounds like a TR-909 for the drum pattern.
Is there any function like this in Logic, or perhaps a plug in that will do that? I searched the forum without any luck.
Thanks

I haven't seen anything like this, but...
For Guitar's mainly... if you plug your guitar into a good pedal which has a midi out set up, you can plug it into your mac and record by playing the guitar using midi... then you can edit it.. works same way as keyboards... I expect you can do the same with drums if you used digital, i'm not sure.
hope this helps
TSnail

Audio to MIDI Groove/Audio to Score - Undocumented Change

Anyone who uses these functions may have noticed a recent change in behaviour.
From page 464 of the manual...
"Creating an Audio to MIDI Groove Template"
"5 Click on any audio trigger point to prevent it from being transferred to the template.
Manually selected (unused) points will be dimmed."
Well... the background of the 'trigger point' area used to be white and totally independent from the region selection process, so although the trigger points themselves are only one pixel wide, it wasn't a problem if you missed one when clicking; you just kept clicking until you got it. The problem now is that the trigger point area is dark and is included as part of the region selection process, so if you miss a trigger point by even one pixel when clicking, the region will become deselected.
Something else not mentioned in the manual is that holding the Option/Alt key will prevent region deselection when clicking the trigger point background. Be careful not to drag while option-clicking though, as this will move the region boundaries.

There is the Audio to Score function located in the sample editor->Factory->Audio to score which will convert Audio files into Midi Data, but it mainly works reasonably well with monophonic melodic material and drums/percussive sounds. So don't expect harmonic material/chords to be converted as you might expect.

Decent Audio to Midi VST

Hi there,
As the title suggests I'm after a good Audio to Midi converter which runs via Logic as opposed to programs such as Drumtracker which run independently.
Can anyone help me out?
Thanks

Hi all,
I'm with David E. on this one.....
$ta$h wrote: "Logic's Audio to MIDI is just there to make the list longer, and its only there to waste CPU ". Sorry mate but that just doesn't make any sense, actually it sounds a little paranoid....
I've used Audio to MIDI to get triggers for kick drums and snares, with fairly decent results. The feature has been there for absolutely ages and as far as I can see has never been refined; much like the Audio Energiser and the Groove Machine. Who'd want to use the Groove Machine when there are so many other easier ways to achieve the same thing (ie Rex loops, or the new GrooveShifter plugin)? Still I'd rather they left these things in than took them out. I think it's a cheap shot to say they're there to make the menus look bigger - and surely they don't use CPU while they're sitting there as unselected options.....?
PS - I'm not trying to pick a fight! Just feel I should stick up for the developers occasionally......
Cheers
Mat

"Error while trying to sync Audio and Midi"

"Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Also, I have tried reseting the 828 to factory default and that does not help.
Jonathan Jenkins

Hi,
I solved my own problem by resetting the factory presets:
Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
Disconnect the firewire cable from the 828mkII
Press the Setup knob
Turn the Setup knob all the way to the right
Press the Select knob
Press the Value knob
Power off the interface and plug the firewire cable back in
Power the interface back on
The same steps can be followed to restore the Factory Default Settings on a Traveler.
-Robert

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
(this was a bug way back when Logic7 was first released)
this is bad!
SvK

Thanks Steven.
big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
Non Tempo-Event found in Sync Reference
We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
We deleted it, got the same error message, but the prob seems to be fixed.
Apple, please fix this!
Thanks
Felix

Audio and Midi Jumping/Swithching Tracks in Arrange Window

I've had an issue with audio and Midi information switching tracks in the arrange window. Granted, I'm new with Logic. But as I'm working in an audio Track (let's say track 3), I happen to undo a record pass or delete something, and the next thing I know, all the tracks have jumped up one -- so the Midi drums in track 10 are in nine, playing the piano insert. The Midi Piano is up in 8 doing nothing (because track 8 is an audio track), etc. etc. etc. Very annoying -- even when the tracks are frozen.
Any comments or suggestions would be appreciated.
Thanks

I've had this happen in the past.
What version of Logic are you working on?

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

How do I bounce audio and midi tracks at the same time to burn a CD?

Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amata

Hi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge

Error message trying to synchronise audio and midi sample rate 42463

I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
Apple, is this a way of forcing me to upgrade to V10?

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Converting audio to midi

Similar Messages

Maybe you are looking for