Converting avi to mov files - Adobe Premiere to FCP

I have an old Premiere system and I'm finally converting to FCP and now am trying to get some of the avi files from it.
The AVI codec is: matrox mpeg2 i-frame
I cannot play the avi files in quicktime or compressor in order to convert them.
Does anyone have any ideas of how to convert these files?
Thanks.

Hi,
[MPEGstreamclip|http://www.squared5.com>
Free, quick and easy to use.
Basic info in the link above.
(There may be a certain loss of quality to take into account, test it!)
Gig

Similar Messages

Audio failure on converting AVI to Mov files using quicktime pro

I have used quicktime pro for some time to convert avi files to mov files etc for importing into itunes and ipod. However this week all of a sudden the audio fails on exactly 3 minutes and 28 seconds, and does not pick up again. I have not installed anything during that period which would cause this and i'm totally lost.

Do you have Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

Importing/converting DVD to .mov file for FCP

I had a friend give me a homemade DVD that I want to import/convert into a .mov file for editing in FCP. I've read the threads on MPEG Streamclip, but it asks to select the file(s) to import (vs one file). Not sure if I'm on the right track.
Here's what I see on the DVD:
http://i149.photobucket.com/albums/s63/jtnacc/ishot-4.jpg
Any help would be appreciated.
John

Hi Piero... Congrats man... your explanation is the best simple explanation of getting material off a DVD into a form where it can be editied in FCP.
Just to make it clear to anyone else...
1- go to http://www.squared5.com/ and download the FREE program MPEG STREAMCLIP.
Install it in your applications folder. Start Mpeg Streamclip, and insert the DVD into your drive.
2- Go to FILE > OPEN and use that to navigate to the DVD, look in the video_ts file and select the first .vob file of a series, e.g. VTS010.VOB; you'll be asked if you want to open all files of that stream, and you answer yes. You'd better also apply the command Edit/Remove Timecode Breaks before exporting.
This takes a minute or three depending on how much material ois on the DVD.
3 - Now go to the Mpeg Streamclip command line and select **Export to QuickTime** (NOT Export to DV)
Use these settings :
Compression: Apple DV-PAL (DV-PAL for UK/Europe, or Apple DV-DVCPRO/NTSC), Quality: 100%,
fps: 25 for PAL or 29,97 for NTSC,
Audio: uncompressed, Stereo, 48 KHz.
AND hit go !
Mpeg Streamclip will promt you to name the new file name and a location for saving.
This can take a minute for every minute of material.. so is a slow process.
I decided to use the "in" and "out" markers on Mpeg Streamclip to define smaller chunks of the DVD to convert at a time... rather than risk it running for 40 minutes and crashing (which it did first time). If you're ripping the DVD for editing purposes then this should not cause any problems.
Once it's finished, go to the save location, and you should see a Quicktime movie with the name you gave it.
You can now go into FCP and IMPORT this Qtime move and edit it.
MARVELOUS
Thanks again Piero - this has really helped me
P

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.
How do I around this problem?

We need to know a lot more if we're going to help you.
What happens when you try? Do you get an error message? If so, exactly what does it say?
What version of Premiere Pro? Have you installed the recent updates? What operating system?
Does this happen for all .mov files or just some? Has this ever worked before? What version of QuickTime do you have installed?
Here's a page written for After Effects, but the information is relevant to Premiere Pro and AME, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

Importing mov files in premiere pro cs5

I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
2. the next prob is my dymanic linking does not work.
Help please

Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
Gosford Lawrence
!https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
Date: Thu, 21 Apr 2011 17:40:14 -0600
From: [email protected]
To: [email protected]
Subject: importing mov files in premiere pro cs5
Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
Glad that removing ZA solved your issue.
Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
Good luck,
Hunt
>

Im having trouble importing mov files into premiere pro on creative cloud, have installed quicktime

Im having trouble importing mov files into premiere pro on creative cloud, original problem was no video and only audio when I imported mov file, so I have installed quicktime after reading that may solve the problem,but now an error message reads codec missing or unavailable, any help would be appreciated

MOV is a wrapper... what is inside the wrapper?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

How I can import Avi (Imm5 format) to Adobe Premiere pro CC?? I am using Windows 7 thanks

How I can import Avi (Imm5 format) to Adobe Premiere pro CC?? I am using Windows 7 thanks

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice? Thanks!

Hi Susan,
It is no simpler converting vobs to mp4 than mpg (mpeg2).
There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
You may need variations of these commands depending on encoding of vob.
Note: -i means -input-file; -sameq means -same-quality, as much as possible.
ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
Do keep us posted please .
Cheers,
Rob

I am having a hard time . i am trying to import .MOV into adobe premiere elements 10. ???

i am trying to import .MOV into adobe premiere essentials 10. please help

Patrick Bourret
I think that we may now be in a multiple thread situation.
I just responded to this thread in this forum minutes ago.
http://forums.adobe.com/thread/1365716?tstart=0
Please use the other thread to continue the discussions in the progress.
Mutliple threads on the same matter can be confusing for those asking the question and those trying to reply.
Thanks.
ATR
Add On...Please be sure to include just what problems you are having (in detail) so that we can distinguish between a how to question rather than why is this not working question.

Import mov files into premiere pro cc windows

Hi
to import mov files into premiere pro cc 64bit ,windows 8.1 64bit pro do i need Quicktime pro or quicktime alternative ?
because when i try to import a mov file i got this error
thanks
i remember cs6 was able to import it
i have never installed quicktime pro

Your question simply cannot be answered definitively for a given clip because it's the codec that matters, not the wrapper/file extension.
As of one of the 7.x releases, Premiere implemented native support for decoding some codecs within a QuickTime file. But that native support does not extend to the entire universe of codecs that can be stuffed into the wrapper.
So you can either report the codec or simply install QT and see if that enables PPro to import the clip.

Working with converted .mov files in Premiere Elements 2

I recently got a digital camera that records .mov clips with H.264 technology. I use it for back up when Im having problems with my regular camcorder. Of course I can work with these .mov files in QuickTime Pro with no problem. But in order to work with them in Premiere Elements 2, it appears I have to export it into the .avi format first. After exporting in QuickTime Pro, when I bring the new .avi file up into Premiere Elements, the color quality is retained, but much of the resolution is lost. Its very pixelated. I understand that .avi and .mov work differently in the way information is stored avi in chunks and mov in streams, but Im wondering if there is a way I can work around this. The reason why I got QuickTime Pro initially was to be able to convert my finished .avi videos made in Premiere Elements 2 into MPEG-4 files using the H.264 codec for better quality. And Im doing that all the time now with no problem. So I am wondering if when I reconvert the .mov clip thats been converted into .avi back into mpeg-4, will the resolution be restored? That is part of my question. The other part is regarding the initial conversion process. Are there settings in QuickTime Pro for converting .mov to .avi with as little loss in resolution as possible? The manual doesnt address this issue specifically. Any ideas or suggestions? OS is Windows XP Media Center edition, computer Sony Vaio dual processor. Thanks, Judy

Hi again Steve. I'm so embarrassed. After my initial reply to your message I went to the Adobe site to see if they even made Premiere for Mac and learned they don't. I also read a review in Wired that says Premiere 6 is just as good if not better than iMovie which they say has actually been downgraded. I'm using Premiere 2, so I thought I might consider upgrading. Then I watched "Steve's Story" and realized it was you. (Your daughter is a cutie! Adobe must love you.) So my question is this: Would my problem be solved by simply upgrading to Premiere 4? If I do that, would it be compatible with regard to catalog integration with Photoshop Elements 4 or would I have to upgrade to Elements 6? If I upgraded the whole package would my current Photoshop Elements 4 catalog transfer with all tags intact? This is vital for me to know because I rely on them heavily. I realize that I would be skipping a version in the upgrade. Is that possible? Does that matter? Please read my reply to Bill because it explains why I want to use those particular .mov files. Another question for you. I use your excellent book a lot. If I upgrade will it become useless? Finally, since you're the expert, let me tell you what I'm really aiming for and get your advice. I need to start composing my own musical soundtracks to my videos. I want to do it as I'm viewing the timeline. Therefore, I know I need to invest in a midi-capable keyboard or controller and software. The problem is that there are few controllers compatible with Windows XP Media Center Edition. I am told I would need to disable the XP Media Center registry keys for anything to work which wouldn't matter because I don't use Media Center features anyway (like TV hookup, media player, etc.). But messing with the registry sounds a little complex and dangerous to me. There's got to be an easier way. Do you have any advice or recommendations? Can you point me to any helpful resources? Now you see why I want a Mac? Everyone says all this kind of stuff would be so much easier with a Mac. Problem is I have a limited budget and would like to make the most with what I have. I hope I haven't overtaxed you with my questions. Thanks for your patience! Judy

Converting .mps or .avi to .mov files

Hey guys,
I need help i was given a hole bunch of footage and I need them to be .MOV files. They are mostly .MPS and .AVI's. Anyone know the best way I can fix this issue??

Use MPEG STREAMCLIP. Here are two tutorials printed with permission from the author, Nick Holmes:
http://lfhd.net/2009/06/26/mpeg-streamclip-tutorial/
http://lfhd.net/2009/07/05/using-mpeg-streamclip-with-fcp-pt-2-batches/
Shane

Need Help Converting AVI Home Movies to Mpeg without audio and Video Delay.

I have lots of home movies of my new baby i want to take with me while in Navy training and need help. I have tried 7 movie conversion software programs and it have cost me a lot, but none of them work. Any suggestions please? I leave soon and would like to know as soon as possible please. Thank you so much
Converting AVI to MPEG on Windows XP OS

YOu need to learn how to use FCP. Sorry, no offense needed, and I know it sounds harsh. But from reading that I can tell you have no idea about how to properly import tapeless media into FCP...and don't know what formats FCP works with...nor know what formats the cameras record. This is all basic stuff you need to know before you edit. Editing isn't only creative, but lately highly technical as well...you need to know what your software is capable of doing, and how to get the footage into it properly.
You cannot do what you did...directly drag from the cameras into FCP. No...it needs to be imported, typically with LOG AND TRANSFER...and converted from the shooting format, which typically isn't natively editable in FCP (want native, use Adobe Premiere...). It needs to be converted to ProRes. And yes, the file sizes of ProRes are a LOT bigger than the camera originals. 4-5 times larger. That's how FCP works.
Here's a quick tutorial to get you started. But then I suggest getting to know the editing system better.
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1

Converting avi to mov files - Adobe Premiere to FCP

Similar Messages

Maybe you are looking for