Converting CS3 to CS4 Project

I need to convert my CS3 project to a CS4 project- I need the OMF2 of CS4
Will use a PC version for both CS3 to CS4.
Does anybody know the steps to converting CS3 to CS4 in detail?
Please.

Watch out for some of the filters and keyframing from within Premiere, as well was the 3rd party issues.
I've had problems in opening cs3 projects which have things like clips that combine time remapping and clip movements via keyframing that have not came through the same in CS4. Also garbage mattes specifically seem to translate incorrectly and they have to be adjusted.
But if it's a simple cut to cut with a few dissolves, I don't see any major problems. Skim through the timeline after the import/convert and make sure everything looks as it should.
- wb

Similar Messages

CS3 to CS4 project conversion issues

Imported a CS3 project (I had saved in Project Manager) to CS4. After the update prompt, I find the project has many issues. None of my Boris F/X are there, many of the parameters I set in Adobe effects controls are set differently (position, scale, etc.), the timeline shows everything needs rendered (even original video clips) and when I test render a portion of the work area, the quality goes down, the frame size changes and I get exposure changes. Lots to correct and not sure where to start. Did I miss something in the settings?? Pretty new to CS4, Thanks

Unfortunately common wisdom does not apply in this case, as it is a
3-stage project produced from late 2008 to late 2010, plus future
updates. So, common wisdom would be to make helpful replies.
David J. Whiteford
A/V Production Specialist
Justice Department/Federal Bureau of Prisons
Management & Specialty Training Center
791 Chambers Rd.
Aurora, CO. 80011
303-340-7857
>>> Harm Millaard <[email protected]> 11/2/2009 11:32 AM >>>
Common wisdom is to finish the project in the version you started
with.

CS3 to CS4 Project compatibilty.

May have been asked/answered before butI missed it.
... as soon as possible can someone with CS4 advise if CS3 Projects open in CS4 (and vice versa).

Thanx
I always have a lot of legacy projects that get adapted/ reedited regularly (TVCs)
So everytime a new version emerges it is important I can successfully move the projects forward at least. I do not want to build and manage another NLE system specifically for CS4.
I have one for CS2 and one for CS3 already but that is because one is SD and the other is HD.

CS3 to CS4 project

I opened a CS3 project with CS4. All the files seems to be in the project window, but the timeline says "timeline (no sequences)". There is "sequence 01" in the project window. How do I get the timeline to see this project or sequence?

Double click the sequence in the project window. This has only been answered a couple of hundred times. Next time do a search. And use a better more descriptive topic for your post.

Convert CS3 XMP Panels to work with CS4

I have a series of custom XMP panels which we wrote to work with CS3. Now that we are about to migrate the balance of our users to CS4 and shortly everyone to CS5, I see that these panels no longer work. What is the easiest way to migrate these panels.
Thanks in advance,
Morgan

Hi,
we have made an experimental java tool to convert CS3 to CS4/5 panels.
Please find it attached and try it out if you like -- but I can offer no warranty :-)
Note that the approach is limited when it comes to the layout of the panel.
You need to adjust the generated MXML code.
It works as follows:
1. Find your CS3 panel (a txt file) and can call
java -jar EvePanelConverterApp.jar {Eve Input File} {MXML Output File}
The tool converts the panel based on an EVE (ZEVE) definition to an MXML file.
2. Use the XMP FileInfo SDK, create a new panel project using the "Custom Panel Wizard" and stuff the generated MXML file into it.
3. Adjust the design, compile and deploy.
Please let me know, if it worked for you or if you have questions or problems.
-- Stefan

How to Open PPro CS4 project in PPro CS3?

I have to make hundreds of individual avis from a Ppro CS4 project. In CS4 the Media Encoder has to open up for each one and then I must wait til it loads the clip and then I can keep them in queue and do many at once but it takes forever. Is there any way to open this project in CS3 so I can simply export movie files one after the other (without that horrible media encoder)?

Unfortunately, there is almost zero backward compatibility. I did find that Encore CS3 Projects could be Opened, with few issues, in my EncoreDVD 2.0, but that was surprising, and not of help to you.
Now, one can use a bit of a workaround, if such is required. One can edit loosely in CS4 (remember, you will want Handles), or edit very tightly with all Transitions, knowing that those will not be changed in CS3. When done, Export (for SD Projects, either the DV-AVI Type II, or Lagarith would be good), and then Import that into CS3.
Also, an EDL might be useful. There is another option, similar to EDL, that starts with an A, but my mind has gone blank. Others will be quick to offer that, and tell you if it would be useful in your case - sorry.
Good luck,
Hunt

Problem exporting a Converted CS4 project

My system:
Make: 2009 Mac Pro 4,1
OS: 10.6.4
CPU: 2 x 2.93 GHz Quad-Core Intel Xeon
RAM: 32 GB
HDD: 4 x 1.5 TD: 1 for the OS and apps, 1 for project files, 1 for render, 1 for time machine backup
GPU: NVIDIA Quadro FX 4800
APP: PPro CS5 ver. 5.0
I have been working on an older CS4 project that needed a few changes and then to be finalized. I can open and work on the project just fine, but it fails on export every time. IF I am lucky, I get an error window with just an exclamation point that says "Error Compiling Movie. Unknown Error." Which is unbelievably helpful...
However, usually it will lock up my entire machine. The whole screen will be frozen with no ability to access anything and I will have to hold the power button to turn the machine off and restart. The project in question is a mix of m2t and HVX P2 footage as well as some titles and still photos totaling around 5:40 long. So far this only seems to happen with older CS4 converted projects. I have opened 4 CS4 projects and tried exporting with 50-50 results. 2 exported just fine and 2 gave me this error. However the project that inspired this post is the only one so far that has locked up my entire machine (and done so consistently) and it just so happens to be the one I need to finalize this week. I have tried exporting from Premiere and from AME by bringing in the sequence, as well as mixing up different exporting settings and codecs with nothing making a difference. The same thing happens regardless of what I try. I'm out of ideas at this point.
Please, if you have any thoughts, share them. I'm open to most suggestions. However, depending on what they are, it might take me awhile to try some things as I am not an Admin on my machine.
One more note, I am running Ver 5.0 because 5.0.1 gave me other headaches. 5.0 (until now) had been working much smoother for me so I don't consider 5.0.1 to be a solution to my problem.

Sounds like a job for "Trash Prefs Man"
http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
The fact that you are finding CS5.00 to be better than CS5.01 says to me that there may be something going on with your system or your install rather than anything else.
Assuming you get the project done, I'd uninstall all of your Adobe apps, run the CS5 Clean Script a few times, do your normal Mac maintenance and then reinstall your Adobe and run all of the updates. I think then you'll find it to be a better experience. Oh, check to make sure you're running the latest nvidia driver for your Mac 4800 too.
I hope this helps,
Dennis

Moving a big PP CS4 project to CS3 ...how to ...?

I cannot keep working on my project with PP CS4 I keep having very ennoying problems : un-openable projects. like once a week or so, a project and all the auto saved version of it - become unopenable... the progress bar stalls...
I thought I solved my problems when I upgraded to vista ultimate 64 and did a very simple setup (CS4 and a few animation softwares... not much more...).
I spent too much money and way too much time and haven't understand WHY some of my project won't open (it olny happens 5% to 10 time
I lost A LOT of time trying all sorts of things, all the operating systems (XP home, XP pro, XP 64, VISTA64 and WINDOWS 7 build 7600) ....
I have a DELL precision 690 workstation 2 dual core/3ghz - 8 gig ram - a quadro 3450 video card ... almost nothing installed but the production premium CS4 suite ...
We still will be working for at least 3 months on this project...
I'm fed up with all the lost time and I have ABSOLUTELY no clue why we have problems, despite all the troubleshooting and tiem spent on the forums...
So I lost faith in PREMIERE CS4.
I tried hard enough. I need a faithfull editing software.
I have to decide between CS3 or FINAL CUT.
We are working on a half hour animated film.
Our latest PP timeline includes close to 2000 medias (still/QT and audio files).
Has anyone done this operation ? ... going from PP CS4 to CS3 ?
I am ready to spend a full day to do copy/paste - export timelines one by one ....
I am not ready to redo the whole editing, as it may take a long while to place all the media
at the right place.
Any clue or trick or plug in or whatever that could help us do this move would be greatly appreciated!
also I know I am on an ADOBE forum, but I am also interested in the pros and cons of cs3 vs FCP...
I would prefer using CS3 as we use photoshp and AE a lot in this project and like to stay in the ADOBE world... but if there's an easy way to go from PP CS4 to FCP we may consider it...
... another small hope is the 4.2 upgrade...?
thanks for any help!!
luc

rejdmast1 wrote:
I did an AAF export from CS4 to CS3 a couple of months ago just for grins.
I'm pretty sure after you point it to the correct folder it will find all the media in that folder.
so Far I was unable to export AAF.
First attempt was with the whole project (I have 35 sequences/timelines within the same prject - project is 41 meg big)
around 1850 medias.
I did the export yesterday evening - after supper, it was still exporting .. thougt I let it overnight .. and this morning it looked like it was still calculating.. I hit CANCEL... and then PREMIERE crashed...
... I re opened my last working project. I removed 80 % of the media - my plan being to import in CS3 my main project in pieces ...
I tried to export in AAF but it crashed when the progress bar reached the right side....got an error message... forgot .. something common - couldn't save ... or ERROR ... a message with no information...
I tried with a new projetc - 15 quicktime that I imported in a new pp project - It worked...
So it is really my project...
Is my project "sick " ... I would love to understand something!!!
I will have another day of work lost...
funny I begin to get used to that ...
I completely gave up on PREMIERE CS4 . I really feel betrayed...
... for you rinformation my machine is really healthy and working very well - I have almost nothing installed...
any help is greatly apreciated...
I want to understand...
if there's something to understand... maybe it'just PREMIERE CS4 that does not work how it should ?
so

Footage changes when converting CS4 project to CC project

I have many CS4 projects that I have converted to CC.
Some of these CS4 projects had footage defined as a subset of images in a folder. For example:
Animation_[00000-00089].png = "C:\example\Animation_00000.png" through "C:\example\Animation_00089.png"
where the folder C:\example contains 500 images (Animation_00000.png through Animation00499.png)
After converting to CC, the new projects now have the footage defined as ALL of the images in the folder. So instead of this (CS4):
Animation_[00000-00089].png = "C:\example\Animation_00000.png" through "C:\example\Animation_00089.png"
I now have this (CC):
Animation_[00000-00499].png = "C:\example\Animation_00000.png" through "C:\example\Animation_00499.png"
Does anyone know a way around this (apart from manually replacing the footage in every project)?
Alternatively, is there an AEGP API I can use to determine what subset of the footage is used in a given layer (I'm exporting the footage via an AEGP plugin)?

I wouldn't really mess with tweaking keyframes this way and that or knowing which keyframe gets deleted: there's too great a danger that the track would be off. I'd just start over from scratch with the 23.976 footage in a 23.976 comp.
Fortunately, you've already done it once, so the process should go a lot more quickly.... and it really should take all that long, period. It would take a lot longer to try and fix the error than it would take to do it properly.

Downgrade Premiere Pro CS4 project to CS3 possible?

Is it possible to export a CS4 Premiere Pro project in such a way that it will open in CS3? Is there any neutral format such as InDesign's .inx format?

Tam,
I rather doubt that you can do a direct transfer of a CS4 Project to CS3. Your only course might be to Export your CS4 to DV-AVI and Import that file. It will have all of edits in place, so you will not have the individual Clips. You can use the Razor, to "create" individual Clips, but you will NOT have Handles on these. You could eliminate all Transitions and then extend each individual Clip to include Handles, but you'll then need to re-set all Ins-n-Outs.
Now, you might get lucky. Whiled doing some testing for another user, I Opened his CS3 Encore file in Encore2, without even thinking - dang if it didn't work to about 90%. I think it would have worked 100% had I had his Assets and exact folder structure, but that was not what we were testing.
You might just try Importing the .prproj file into CS3 and X-your fingers. As I started, I would NOT expect this to work, but who knows. If it does, even to a degree, please report back, as this is a common question with each new release.
Hunt

Loading a CS4 project into CS3

My son has CS4 and I have Premiere CS3. How can I load one of his saved CS4 projects into CS3? There doesn't appear to be a "save as" feature in CS4, nor an export option.
Any help would be much appreciated. I'm in the middle of a big project and I don't want to upgrade midstream.

Thanks for the response, but it seems a little short-sighted on Adobe's part: even Microsoft allows you to save documents in previous versions so others can read them. Anything for an upgrade fee, I guess.

Making an AE CS4 project compatible with AE CS3

Hi,
Is there a way to save a CS4 project so it can be opened with AE CS3?
Thanks!
Pau

No, not at all. The only thing you could do is to copy&paste items from CS4 back to CS3, if it's important. It will however only work on a 64bit operating system, as normal 32bit OSs will not allow to launch two instances of After Effects.
Mylenium

Convert. Files from CS3 to CS4

When I open files created in CS3 within CS4 all the text and graphics are gone. I'm left with grid lines. Any ideas?

Thanks Peter. The uninstall & reinstall did not help. Based on your suggestion I have also tried replacing preferences (Ctrl+Shift+Alt) when launching InDesign CS4. Did not help. I've found I can't even create a new document without getting "InDesign.exe has encountered a problem and needs to close" and the icons for my tools panel are not shown - all I see are the tool tips when hovering. Adobe Tech Support pointed me to KB404723 for further trouble shooting.

Cs4 project loaded as desktop mode in cs5

Hello:
Just made the full upgrade yesterday from cs4 to cs5 on windows 7 from vista using the matrox with max. Loving the HD editing. I also tried to open an SD cs4 project in cs5. While opening, and after the message that tells you it is converting to cs5, I got this message - 'The editing mode used by this sequence could not be loaded. The sequence will be opened in desktop mode.' So the project opened, I created a new sequence with the matox settings and cut and pasted the original sequence into it. Any area that had to be rendered went pixelized. The only way I could get rid of this was to remove all colour correction, effects and transitions. When I reintroduced them, I ended up with the same result. I have found a work around, and that is opening a new project and importing the old cs4 project into it rather than just trying to open the cs4 project with cs5. Rather than using matrox settings, I just rerendered the sequence and it works fine, however, I don't have my program monitor which is controled through matrox. This will be the last of two SD projects, but wondered if anyone else had this issue.
Thanks, Christine

Yes, the Export function is the best that you will be able to do. There is usually forward compatibility between versions' Projects (though with a few pitfalls and failures), but there has never been backward compatibility. Closest that I have ever seen was some CS3 Encore Projects would Open in EncoreDVD 2.0, but that does not help you.
Good luck,
Hunt

Using CS3 and CS4 on the same computer

I have CS3 and have used it for about two years completing many projects and I am considering upgrading to either CS4 or CS5. When and if i do this will I have to delete CS3 and replace it with the newer version or can they both remain functional on the computer? And how compatible are the projects, can you open a CS3 project in CS4 or CS5 without issues?

CS5 will ask to convert and save new copies of your CS3 and 4 projects when you open them. They will work in CS5, but they will not be backwards-compatible.
And how compatible are the projects, can you open a CS3 project in CS4
or CS5 without issues?

Converting CS3 to CS4 Project

Similar Messages

Maybe you are looking for