Converting Datalog files from LV5.0 to LV6i

I have some datalog files from LV5.0 and I'd like to use them in LV6i, but when although I push convert when asked it provides input parameter invalid when reading. I'm using the same vi I used to create and read the in LV5, so it's not supposed to be a program mistake. How can I convert them?

Try using the "Read Datalog File Example.vi" that comes with labview 6i. It uses different subvis than the LV 5 equivalent. If you do this, it should convert the file without any issues.

Similar Messages

  • How can I convert datalog files from LV5.0 to LV6i?

    I have some datalog files from LV5.0 and I'd like to use them in LV6i, but when although I push convert when asked in the moment of reading the file,it provides input parameter invalid when reading. I'm using the same vi I used to create and read them in LV5, so it's not supposed to be a program mistake. How can I convert them?"

    Hello,
    Thanks for answering my question. I downloaded LV6.02 as you suggested but the problem persists.
    I don't know maybe it's something very simple. I have attached 1 program to read the datalog file and another one that reads it in every version (LV5.0 and LV6.02) in case you can help me.
    Thanks again,
    Javi
    Attachments:
    WriteLV5.vi ‏65 KB
    OpenLV5.vi ‏74 KB
    OpenLV6.vi ‏59 KB

  • How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
    The answer depends on the type of video files you want to convert.  If they are DRM protected commercial videos, no help can be given here.  Google.

  • When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How can I solve this problem?

    When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How do I solve this problem?  I don't know how to change it from Read Only.

    Dear Sara
    Thank you very much for sending the converted file.  Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
    Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful).  I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK".  However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before.  I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images.  Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian."  Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
    Regards,
    Judith.

  • How to convert a file from pdf to txt in java

    hi,
    in my project ,I want to convert a file from pdf to txt using java api. If anyone
    have any idea about it plz help me.

    Google has several ideas. :)

  • Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

    Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

    yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

  • Want to convert a file from Windows XL to PDF

    Want to convert a file from Windows XL to a PDF can this be don?

    Search!
    http://lmgtfy.com/?q=convert+xl+file+to+pdf

  • I paid to convert a file from pdf to Word doc. and it is unintelligible. Why ?

    I paid to convert a file from pdf to Word and it is unintelligible. Why ?

    Hi M & B P,
    Please give the following a try:
    If you're converting via the ExportPDF website, log out, clear the cache, and then log back in.
    If you're converting from within Reader, choose Help > Check for Updates to make sure that you have the most current version.
    Please let us know how it goes. If you're still having problems, please let us know how you're converting, what browser you're using, and whether you're on Mac OS and Windows. We'll do some deeper digging if need be.
    Best,
    Sara

  • How to convert WMA files (from Windows Media Player) to play in iTunes

    How do I convert WMA files (from Windows Media Player) to now play in iTunes?

    Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
    tt2

  • How to convert raw files from new fujifilm x-t1 ?

    how to convert raw files from new fujifilm x-t1 ?

    The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
    Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

  • DNG converter not converting RAW files from Canon 70D.

    DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

    hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
    in any case, cr 8.2 or better is able to convert your camera's raw files.  why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

  • I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

    I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

    What version of P-Elements, and what codec does the camera produce?

  • Need help converting project file from Creative Cloud to CS6

    Hello.
    I started a project file on the Adobe Creative Cloud and I am trying to convert the file to CS6 (as that is what all my editors have). I have all of my time codes generated in Creative Cloud and I need the easiest solution to share the file across platforms with out corrupting it. Any help is appreciated. Thank you.
    -A*

    I am the director of the project- so I am not very technically inclined to answer these questions, but will try my best. My lead editor dropped out of the project leaving me very confused and I am trying to establish a new workflow based off of her existing project file.
    The original project was started in Adobe Creative Cloud. I am now trying to use Adobe CS6 and I am trying to figure out if we can convert a file from Creative Cloud > CS6. If you can provide a list of questions for me to ask my previous editor I can direct them to her and try to provide a more concise answer. Thanks for your help.

  • HT204433 can i take my converted epub file from pubit! on my PC and publish it to ibook?

    Can I take my converted epub file--from pubit! on my PC--and publish it to iBooks from my PC?

    Thank you. I was just wondering if i could do it myself. I have since converter my novel to ePub
    format and have it in my itunes book library and on my iPhone. All text and the cover look great, so I had hoped I could upload to apple on my own.

  • "Error 1 when trying to open and read datalog file from several subVi's

    So, I've been coding up this model based controller and have hit a snag:
    The program starts and opens a datalog file and passes the refnum to two loops.
    At a regular time interval (every 2 minutes), one loop (that's iterating once per second) writes the current information to a datalog file.
    Meanwhile, another loop (that's iterating continuously) checks to see if the file is big enough to support training of the model, if it is, then the training process begins. Once this happens a period of recent information is read from the file. Initially, this read would fail and return 0 data. However, this problem was fixed by passing in the data file path rather then the refnum and having the vi open,
    read, and close the data file. With the path, the vi was able to read all the data. However, still in the same loop, another vi downstream tries to read the file and returns error code 1, and no data is read. I tried passing that vi the path and seeing if it made any difference to open, read and close the file. But even then the read failed (with error code 1).
    I don't understand why it can read in one vi and not the other!
    Does anyone know what is going on here? It seems that semaphores would probably solve the problem, but would prefer a simpler solution. Thank you very much.

    Try passing the data to the continuous loop through a LV2-style global. That way you are only access the file in one place. But then that begs the question, if the data is passed internally, do you really need the file at all?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for

  • Error : Excise modvat accounts not defined for GRPO transaction and U1 exci

    I have Created Impot PO, After Planned Delivery cost MIRO I am trying to Perform GR then its giving Error "Excise modvat accounts not defined for GRPO transaction and U1 excise group Message no. 8I402"       I have already maintained GL account in "S

  • Retrieving data from document stored in External Server.

    Hello , We are working on a PoC requirement in which the data from a document stored in an external server (not using DMS) needs to be read from a reprot program in SAPCRM. Is this possible to do from CRM. Can you please suggest if there are any stan

  • I need to reset, clear or deselect a group of radio buttons

    I haven't been able to find the answer to this: I have a quiz-like animation that uses a group of radio buttons, I need the group to reset, clear or deselect the previous selection after submitting the answer on each question, is that possible? Here

  • Help in java program.i cnt solve the need of this question.question inside.

    Create a class named Employee. Includes data members for Employee class : Data member     = Data type Employee id     = String Employee name     = String Icno     = String Gender     = Char Date of birth     = String Address     = String Commencing D

  • Converting the user response date value to date data type

    Hi, I have a parameter which takes date as input (from date and to date). I need to get the difference between these two dates. So i can use the function todate(userresponsedate,"dd/mm/yyyy") but here i cannot hardcode the date format as dd/mm/yyyy.