Converting document files of more than 100 Mb?
Is it true that you cannot convert document files with more than 100 Mb to PDFs because of that limit on Adobe CreatePDF?
Is there a way of solving this problem e.g. document files with 285 Mb?
have you tried compressing the images in the original document? You can probably compress to 200 dpi if they are only for printing.
Similar Messages
-
Flex file upload more than 100 MB
Hi,
Is there possibly any method where I can upload file to the server which are more than 100 MB?
I've gone through the nice piece of code demonstrated at here : http://www.zehnet.de/2009/02/23/flex-fileupload-component/ , where it shown how we can upload files in chunks to the server following FP10, but it also limits to the FP max limit of 100 MB. I've also gone through the discussion followed at: http://forums.adobe.com/thread/494366 , where a process been discussed where FP first reads a defined amount of bytes from a file, loads them and upload them and then go for the rest of the bytes, following openAsync() method for FileMode.READ, but which is only available in AIR. So, I wonder, if there could possibly any way to upload more than of 100 MB files in chunks to the server in browser mode of the Flash Player.
Thanks for any coming suggestions.
Rgds,
Santanu.KLong time no see vet. Your problem sucks. I would go to sun site review there articles on JVM tunning. To solve this problem you will need to change the command line arguments to JVM to increase the heap space.
java -Xms<initial heap size> -Xmx<maximum heap size>
Defaults are usually: java -Xms32m -Xmx128m
-Xm*s* - initial java heap size
-Xm*x* - maximum java heap size
-Xm*n* - the size of the heap for the young generation
This is a good article: http://java.sun.com/developer/technicalArticles/Programming/turbo/
Also, if this solves your problem please check it off so I can get some points. I've been out of the game for awhile.
Ike Wiggins
http://bipublisher.blogspot.com -
Hi Everybody
Please suggest.
For one of our BizTalk interface, we have around 120 receive locations. We are just moving (*.dml) files from the source to destination without doing any processing.
We receive lots of files in different receive locations and in few cases the file size will be around 25 MB and so while moving these large files, the CPU usage is varying between 10% to 90+% and the time consuming for this single huge file is around
10 to 20 minutes. This solution was already in place and was designed by the previous vendor for moving the files to their clients. Each client has 2 receive locations and they have around 60 clients. Is there any best solution for implementing
this with in BizTalk or outside BizTalk? Please suggest.
I am also looking for how to control the number of files which gets picked from the BizTalk receive location. For example, If we have say 1000 files in receive location and we want to pick at a time only 50 files only (batch of 50) then is it possible?
because currently it is picking all the files available in source location, and one of the process is dropping thousands of files in to the source location, so we want to control the number of files getting picked (or even if we can control to pick the
number of KBs). Please guide us on how we can control the number of files.Hi Rajeev,
25 MB per file, 1000 files. Certainly you got to revisit the reason for choosing BizTalk.
“the time consuming for this single huge file is around 10 to 20 minutes”
- This is a problem.
You could consider other file transfer options like XCopy or RobotCopy etc if you want to transfer to another local/shared drive. Or you can consider using SSIS
which does comes with many adapters to send to destination system depending on their destination transfer protocol.
But in your case, you have some of the advantages that you get with BizTalk. For your scenario, you have more source systems (more Receive locations), with BizTalk
it’s always easier to manage these configurations, you can easily enable and disable them when a need arise. You can easily configure tracking; configure host instances based on load etc. So you can consider following design for your requirement. This design
would suit you well since you’re not processing the message and just pass it through from source to destination:
Use a custom pipeline component in the Receive Locations which receives the large file.
Stores the received file into disk and creates a small XML metadata message that contains the information about where the large file is stored.
The small XML message is then published into the
message box db
instead of the large file. Let the metadata file also contain the same context properties as the received file.
In the send port, use another custom pipeline component that process the metadata xml file, retrieve the location of the disk where the file is stored, access the file and send it to destination.
Read the following article on this design..
http://www.codeproject.com/Articles/180333/Transfer-Large-Files-using-BizTalk-Send-Side
This way you don’t need to publish the whole message into message box DB which would considerably reduce the processing time and utilises host instance to process
more files. This way you can still get the advantages of BizTalk and still process large files.
And regarding your question of restricting the Receive location to handles the number of files from receives location. No it’s not possible.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Error while creating more than 100 users using Flatfile Recon
Hi,
I am trying to create users in OIM 9.1 using flat file recon. The recon works when I have less than 100 users in the flatfile. But if I add more than 100 users to the file, the recon does not create all users. Less than 50 users get created in OIM if the number of users in the flat file is more than 100. I get the below error in this scenario.
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
Is there any maximum limit to the number of users created in Flatfile recon? I also get lot many errors following the above error. Please suggest
Edited by: User_OIM on Nov 26, 2012 9:37 PMHi Rajiv,
I am using GTC for the recon. Below is the complete log
com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-11-28 23:08:22,052 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session:
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
at org.jboss.ejb.Container.invoke(Container.java:981)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
at $Proxy278.create(Unknown Source)
at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy798.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,602 ERROR [XELLERATE.APIS] Class/Method: tcBaseUtilityClient/getLocalInterface encounter some problems: {1}
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy798.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: javax.ejb.AccessLocalException: SecurityException
at org.jboss.ejb.plugins.LogInterceptor.handleException(LogInterceptor.java:384)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:136)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
at org.jboss.ejb.Container.invoke(Container.java:981)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
at $Proxy278.create(Unknown Source)
... 55 more
Caused by: com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
... 61 more
2012-11-28 23:08:27,605 ERROR [XELLERATE.GC.FRAMEWORKRECONCILIATION] Reconciliation Encountered error:
Thor.API.Exceptions.tcAPIException: Unable to retrieve default date format
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
ceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by [Nested Exception]:
Thor.API.Exceptions.tcAPIException
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
2012-11-28 23:08:27,607 WARN [XELLERATE.GC.FRAMEWORKRECONCILIATION] Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
2012-11-28 23:08:27,704 ERROR [XELLERATE.SERVER] Class/Method: QuartzWrapper/execute encounter some problems: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,704 INFO [org.quartz.core.JobRunShell] Job DEFAULT.FLAT RECON_GTC threw a JobExecutionException:
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520) -
Outofmemory while creating a new object of file with size more than 100 MB
I have created an application which generates a report by getting the data from our archived files (.zip file).By the time, the application is reaching a file with size more than 100 mb, it is running out fo memory while creating the object of that particular file. Can some one help me by tellin if there id way to resolve this issue?
Thanks in advanceIf you're getting OutOfMemoryError, the simplest thing to try is to give the VM more memory at startup. For Sun's VM, I believe the default is 64 MB. You can increase this by using the -X args that control the heap size. For example: java -Xms128m -Xmx256m ... etc. ... This says start with 128 MB of heap, and allow it to grow up to 256 MB.
One thing to consider, though, is do you need that much stuff in memory at once? A more intelligent approach might be to unpack the archive to the file system, and then read a file at a time or a line at a time or a whatever at a time is appropriate for the processing you need to do. -
Splitting to multiple files in file adaptor when it's more than 100 records
Hi,
I have a scenario where I'm generating a xml file to the receiver using file adaptor I need to write 100 records per file, if it's more than 100 then I need to write into a different file, to say I need to have 100 records per file.
ABAP Proxy > PI- >File
Any help is really appreciated.
Thanks,
Joe.PHi Joe,
What is your source structure and what is your destination structure?
You can go the ABAP proxy route but then your control is not in the integration layer but in the business system. But if you prefer it, here's some code outlined:
data:
index type i,
lcl_proxy type ref to ZCL_Proxy.
i = 0.
try.
loop at lt_recordset into ls_record.
append ls_record to lt_output.
index = index+1.
if index = 100.
create object lcl_proxy.
lcl_proxy->execute_asynchronous(output = lt_output).
index = 0.
clear lt_output.
endif.
end loop.
if index>0.
create object lcl_proxy.
lcl_proxy->execute_asynchronous(output = lt_output).
endif.
catch CX_ROOT.
endtry.
commit-work. -
Smart form: Spool to PDF Conversion more than 100 pages.
Hi folks,
I have an issue with Function Module (FM) CONVERT_ABAPSPOOLJOB_2_PDF when the report to be converted has more than 100 pages.....i have explained this scenario as below
We have been using the FM CONVERT_ABAPSPOOLJOB_2_PDF to convert ABAP report to PDF file and then send this via mail using FM SO_DOCUMENT_SEND_API1.....
PDF conversion using FM CONVERT_ABAPSPOOLJOB_2_PDF works well if the number of report pages is less than 100....i.e the table pdf of the FM will contain the output as expected.....
If the report has more than 100 pages, the the FM CONVERT_ABAPSPOOLJOB_2_PDF will schedule the conversion job as a background job and returns with a SY-subrc eq 0 and the table parameter pdf will ne empty.
Could you suggest me a woorkaround in this situtaion...i.e how do I then get the output of the background job
And any process to convert Spool to PDF if having more than 100 pages.
Thanks in Advance............Pb,
If the report has more than 100 pages, the the FM CONVERT_ABAPSPOOLJOB_2_PDF will schedule the conversion job as a background job and returns with a SY-subrc eq 0 and the table parameter pdf will ne empty
i would suggest you to if pages are more than 100 than you need to send report output to sp01 with spool request number by using fm job_open..job_close..
than from sp01 you can convert pdf by running RSTXPDFT4 in se38.
hope this would solve your problem.
Amit. -
My MacBook Pro with Retina display suddenly gave me a message when I boot up ie 'Your startup Disk is full' then after using a few more times, the screen suddenly become frozen white. Upon getting help, I managed to delete some files but when I checked the Storage space, the largest occupied space was orange color, named 'Others' which is more than 100 GB out of the total 120 GB!! I am surprised and do not understand what 'Others' mean. It is definitely not Audio, Video, Pictures, documents etc It is not mail too. If anyone can tell me what 'Others' in storage mean and how to see the contents of 'Others' so that I can delete those irrelevant files. Any advice and guidance is very much appreciated. Thanking you in anticipation of your early reply.
Joe"Other" includes everything that is not audio, movies, photos, apps and backups. In other words it includes the OS, mail, documents... See http://pondini.org/OSX/LionStorage.html and What is "Other" and What Can I Do About It?- Apple Support Communities https://discussions.apple.com/docs/DOC-5142
To clear disk space see https://discussions.apple.com/message/24012341#24012341 (in addition to Body's excellent document). -
Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
NaveenYour calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact. -
Download Header using GUI_DOWNLOAD for more than 100 fields
Hi,
I want to download data with header from a database table using the FM 'GUI_DOWNLOAD'.
I know that this can be achieved by
1. Download headers first to an internal table and call FM ' GUI_DOWNLOAD"
2. then Download data to the same file by calling FM 'GUI_DOWNLOAD' with APPEND = 'X'
But my database table has more than 100 fields, pls tell me how to download all the fields as header information.
Thanks in advance.Hi
This can be done using the FM GUI_DOWNLOAD.
Store all the field names in a internal table, pass the internal table to FIELDNAMES component of the FM. This will download the internal table with headings.
Note - To download it as excel, pass FILETYPE as 'DAT'.
Regards,
Vinod -
Excel 2013 (pro plus) extermely slow with sheets with more than 100 checkboxes
I have a customer with Excel 2013 (pro plus).
They use sheets with more than 100 checkboxes in it.
The sheet is extremly slow to display. When a user starts scrolling down, the checkboxes appear very slowly, one by one.
It happens with all users, on both x86 and 64bits Windows 8 PC's and Office clients (32b & 64b).
Anyone any idea?Hi R.Nieraeth,
Could you please let us know what exactly these checkbox was used for ? Any formulas depend on these checkbox? Or any VBA code in this excel file? If so, you may need to check your formulas or the VBA code.
In addition,does this issue happen only on excel 2013? You can try to disable hardware graphics acceleration: Click
File, and then click Options. In the Advanced group, click to select the
Disable hardware graphics acceleration check box. Click ok.
Also please check if the following thread is helpful:
http://social.technet.microsoft.com/Forums/en-US/a9a257fa-ce8b-4399-860c-563022b8714f/checkbox-bug-in-excel-2010-slow-response?forum=excel -
Broadcasting results not transferring to AL11 if file size more than 3 MB
Hi All,
I am broadcasting Workbook results to AL11(application server) by using SAP standard program. If the result file is more than 3MB pre calculation working fine but file is not transferring to application server. Could please let me is there is setting to increase the transfer limit to AL11. Infact I am in touch with Ba
Thanks in advance.
Regards,
J BHi Inder,
As per sap recommendation we would be able to handle 100 MB, you need to tune your server by increasing the [arametersso that you would be able to handle the messages with big payload.
By default the parameter icm/HTTP/max_request_size_KB will be 10240 which can handle 100MB of file size.if you increase the parameter value by tuning ur system you can process a file bigger than that..
Please refer to the below links for reference....
[link1|http://help.sap.com/saphelp_nw04s/helpdata/en/58/108b02102344069e4a31758bc2c810/content.htm]
[link2|http://help.sap.com/saphelp_nwpi71/helpdata/de/95/1528d8ca4648869ec3ceafc975101c/content.htm]
as per the above suggestions the best practice is to sand as a multiple idocs splitting into chunks.
Cheers!!!!
Naveen. -
Reports with more than 100 columns
I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
declare
s varchar2(32767) := null;
begin
s := null;
wwv_flow_api.create_report_columns (
p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 157,
p_form_element_id=> null,
p_column_alias=> 'XYZ',
p_column_display_sequence=> 157,
p_column_heading=> 'XYZ 123',
p_column_alignment=>'LEFT',
p_disable_sort_column=>'Y',
p_sum_column=> 'N',
p_hidden_column=> 'N',
p_display_as=>'WITHOUT_MODIFICATION',
p_pk_col_source=> s,
p_column_comment=>'');
end;
/Hi,
Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
Just a thought..................
Regards
Andre -
IChatAgent takes more than 100% of CPU
The iChatAgent takes more than 100% of CPU. It works normally for 10-15min with little CPU usage but then takes 100% of CPU and stays like that until I quit/kill the process. I tried waiting for hours to see it might go down is usage, but no, and the cpu fan remains on continuously.
I simply use it for text based chatting, and have disabled audio, video,microphone etc, and still this behavior that I can't use it for more than 15min.
Here is the iChat version: Version 5.0.3 (745)
Macbook Pro/10.6.4/Intel Core i7
I have tried removing ~/Library/preferences/com.apple.iChatAgent.plist as suggested elsewhere, and that hasn't helped either.Thanks again Ralph.
No, I do not have any add-ons, just out-of-the-box ichat without any audio, video in use.
At this stage unfortunately, I can't continue using iChat as it hogs up the CPU in less than 15min. And that I do not experience any problem with other chat-clients such as AIM or jabber, so switching over to those until there is a resolution.
Suhas
Here is a process-inspection done through ActivityMonitor when it was taking 100%:
Sampling process 517 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling iChatAgent (pid 517) every 1 millisecond
Call graph:
2457 Thread_7542 DispatchQueue_1: com.apple.main-thread (serial)
2457 start
2457 main
2454 -[NSRunLoop(NSRunLoop) run]
2439 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
2160 CFRunLoopRunSpecific
2087 __CFRunLoopRun
670 machport_insertmember
662 mach_msg
661 machmsgtrap
1 mach_msg
5 machport_insertmember
3 migget_replyport
596 machport_extractmember
589 mach_msg
577 machmsgtrap
12 mach_msg
4 machport_extractmember
3 migget_replyport
389 mach_msg
371 machmsgtrap
18 mach_msg
355 __CFRunLoopDoSources0
237 _MessageAvailable(void*)
110 XprtGetMessage
106 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
39 XPRT::TMessageQueue::GetMessage(bool)
14 XPRT::TPtrList::RemoveHead()
7 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
6 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TDynamicTraits::VOrphanElement(void*) const
7 XPRT::TPtrList::RemoveHead()
11 pthreadmutexunlock
8 pthreadmutexlock
4 spinlock
2 OSSpinLockUnlock
2 pthreadmutexlock
3 XPRT::TMessageQueue::GetMessage(bool)
3 _spinlock
31 free
20 szone_size
11 free
24 szonefree_definitesize
23 szonefree_definitesize
1 spinlock
5 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
5 operator delete(void*)
1 XPRT::TCritSec::Unlock()
1 _spinlock
2 XprtTlsGetValue
2 pthread_getspecific
110 XprtGiveMessage
85 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
50 XprtPostMessage
48 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
25 operator new(unsigned long)
21 malloc
18 malloczonemalloc
10 szonemalloc_shouldclear
6 szonemalloc_shouldclear
4 _cpunumber
5 malloczonemalloc
2 _spinlock
1 szone_malloc
3 malloc
4 operator new(unsigned long)
10 XPRT::TMessageQueue::PostMessage(XPRT::SMessage*)
5 XPRT::TPtrList::AddTail(void*)
4 XPRT::TList<void*, XPRT::TDynamicTraits>::NewNode(void*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TPtrList::AddTail(void*)
4 pthreadmutexlock
1 _spinlock
6 pthreadmutexunlock
5 pthreadmutexunlock
1 spinlock
2 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
2 _spinlock
1 XPRT::TCritSec::Lock()
1 dyldstub__spinlock
1 dyldstub__spinunlock
2 XprtPostMessage
14 COOL::TSocket::FireDataAvailable()
13 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 XPTL::CComObject<COOL::TProxiedSocket>::AddRef()
5 XPTL::CComObject<COOL::TProxiedSocket>::Release()
2 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
1 COOL::TSocket::FireDataAvailable()
7 non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
6 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
6 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
2 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPTL::CComObject<COOL::TSocket>::AddRef()
17 XPRT::TMessageMap::Lookup(unsigned int)
7 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
5 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
4 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
1 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
3 _spinlock
3 pthreadmutexunlock
2 XPRT::TMessageMap::Lookup(unsigned int)
2 pthreadmutexlock
1 OSSpinLockUnlock
1 pthreadmutexlock
8 XprtGiveMessage
6 _MessageAvailable(void*)
4 CFRunLoopSourceSignal
3 CFRunLoopSourceSignal
1 spinlock
4 _IMWillLog
2 _spinlock
1 OSSpinLockUnlock
85 CFSetApplyFunction
84 CFBasicHashApply
40 CFBasicHashGetBucket
28 _CFSetApplyFunction_block_invoke1
20 __CFRunLoopCollectSources0
12 __CFRunLoopCollectSources0
4 CFRetain
3 _CFRetain
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
8 _CFSetApplyFunction_block_invoke1
16 CFBasicHashApply
1 CFSetApplyFunction
16 __CFRunLoopDoSources0
4 CFRelease
3 _CFRelease
2 CFGetTypeID
2 dyldstubOSAtomicCompareAndSwap32Barrier
2 dyldstub_IMWillLog
1 CFBasicHashGetCount
1 CFSetGetCount
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
1 OSSpinLockUnlock
29 CFSetContainsValue
25 CFBasicHashGetCountOfKey
25 _CFBasicHashFindBucket1
13 _CFBasicHashFindBucket1
10 __CFStringHash
1 CFHash
1 __CFBasicHashStandardCallback
4 CFSetContainsValue
24 __CFRunLoopRun
9 _spinlock
5 dispatch_get_main_queue_port4CF
3 CFRunLoopGetMain
2 OSSpinLockUnlock
2 dyldstubOSSpinLockLock
1 dyldstub_mach_msgtrap
1 pthread_getspecific
1 pthreadmainnp
36 __CFRunLoopFindMode
31 CFSetGetValue
30 CFBasicHashFindBucket
29 _CFBasicHashFindBucket1
9 __CFStringHash
8 _CFBasicHashFindBucket1
6 CFHash
5 __CFBasicHashStandardCallback
3 CFEqual
2 __CFBasicHashStandardCallback
1 __CFRunLoopModeHash
1 CFBasicHashFindBucket
1 CFSetGetValue
2 __bzero
2 memset
1 __CFRunLoopFindMode
17 __CFRunLoopModeIsEmpty
17 CFSetContainsValue
17 CFBasicHashGetCountOfKey
17 _CFBasicHashFindBucket1
12 __CFStringHash
5 _CFBasicHashFindBucket1
8 CFRunLoopRunSpecific
7 _spinlock
2 spinlock
2 dyldstub_machmsg
1 dyldstubOSSpinLockUnlock
121 _CFRunLoopFinished
80 __CFRunLoopFindMode
66 CFSetGetValue
63 CFBasicHashFindBucket
57 _CFBasicHashFindBucket1
22 __CFBasicHashStandardCallback
16 CFEqual
14 CFEqual
2 __CFRunLoopModeEqual
6 __CFBasicHashStandardCallback
17 _CFBasicHashFindBucket1
9 __CFStringHash
6 CFHash
3 __CFRunLoopModeHash
5 CFBasicHashFindBucket
1 __CFBasicHashStandardCallback
3 CFSetGetValue
6 __bzero
5 __CFRunLoopFindMode
2 memset
1 _CFRuntimeSetInstanceTypeID
29 __CFRunLoopModeIsEmpty
19 CFSetContainsValue
14 CFBasicHashGetCountOfKey
13 _CFBasicHashFindBucket1
7 __CFStringHash
3 _CFBasicHashFindBucket1
2 __CFBasicHashStandardCallback
1 CFHash
1 CFBasicHashGetCountOfKey
5 CFSetContainsValue
6 pthreadmainnp
2 pthread_getspecific
1 CFRunLoopGetMain
1 __CFRunLoopModeIsEmpty
6 _CFRunLoopFinished
2 OSSpinLockUnlock
2 _spinlock
2 dyldstub_pthread_mainnp
39 _CFAutoreleasePoolPop
23 _CFAutoreleasePoolPop
7 pthread_setspecific
3 pthread_getspecific
2 objcgetFreedObjectClass
2 objc_collectingEnabled
2 pthread_self
29 -[NSCFString isEqual:]
11 -[NSCFString isEqual:]
8 CFStringGetCStringPtr
4 object_getClass
3 objcmsgSendvtable2
2 _CFStringGetLength2
1 NSClassFromObject
28 CFAbsoluteTimeGetCurrent
21 gettimeofday
18 __gettimeofday
12 __nanotime
6 __gettimeofday
3 gettimeofday
7 CFAbsoluteTimeGetCurrent
17 _CFAutoreleasePoolPush
8 pthread_setspecific
7 _CFAutoreleasePoolPush
2 objc_collectingEnabled
13 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
6 NSPopAutoreleasePool
2 NSPopAutoreleasePool
2 _CFExecutableLinkedOnOrAfter
2 objc_collectingEnabled
5 _spinlock
4 objc_msgSend
3 dyldstub_CFStringGetLength2
3 dyldstub_pthreadsetspecific
2 CFRunLoopRunInMode
2 CFRunLoopGetCurrent
2 dyldstubCFStringGetCStringPtr
2 dyldstubOSSpinLockUnlock
1 dyldstub__objcgetFreedObjectClass
1 dyldstubgettimeofday
1 dyldstub_objccollectingEnabled
1 dyldstub_pthreadgetspecific
1 objcmsgSendvtable12
9 objc_msgSend
3 -[NSRunLoop(NSRunLoop) run]
1 +[NSDate distantFuture]
1 CFRunLoopRunInMode
1 NSPushAutoreleasePool
3 dyldstub_objcmsgSend
2457 Thread_7543 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2457 start_wqthread
2457 pthreadwqthread
2457 dispatch_workerthread2
2457 dispatch_queueinvoke
2457 dispatch_mgrinvoke
2457 kevent
2457 Thread_7553
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 XPRT::TTimer::ThreadProc(void*)
2457 XPRT::TCondVar::Wait(int)
2457 pthread_condwait
2457 _semwaitsignal
2457 Thread_7554
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 COOL::TSocket::SocketThreadProc(void*)
2457 select$DARWIN_EXTSN
Total number in stack (recursive counted multiple, when >=5):
11 _spinlock
6 OSSpinLockUnlock
5 __CFBasicHashStandardCallback
5 __CFStringHash
5 _CFBasicHashFindBucket1
5 spinlock
Sort by top of stack, same collapsed (when >= 5):
_semwaitsignal 2457
kevent 2457
select$DARWIN_EXTSN 2457
machmsgtrap 1609
__CFStringHash 47
_CFBasicHashFindBucket1 46
CFBasicHashGetBucket 40
_spinlock 37
mach_msg 31
__CFRunLoopRun 24
_CFAutoreleasePoolPop 23
szonefree_definitesize 23
szone_size 20
pthreadmutexunlock 19
CFEqual 17
CFBasicHashApply 16
__CFRunLoopDoSources0 16
pthread_setspecific 15
CFHash 14
-[NSRunLoop(NSRunLoop) runMode:beforeDate:] 13
objc_msgSend 13
__CFBasicHashStandardCallback 12
__CFRunLoopCollectSources0 12
__nanotime 12
-[NSCFString isEqual:] 11
free 11
CFSetContainsValue 9
OSSpinLockUnlock 9
spinlock 9
CFRunLoopRunSpecific 8
CFStringGetCStringPtr 8
XprtGiveMessage 8
_CFSetApplyFunction_block_invoke1 8
__bzero 8
pthread_getspecific 8
CFAbsoluteTimeGetCurrent 7
XPRT::TPtrList::RemoveHead() 7
_CFAutoreleasePoolPush 7
non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*) 7
pthreadmainnp 7
pthreadmutexlock 7
CFBasicHashFindBucket 6
COOL::TSocket::SocketMessageProc(unsigned int, void*, void*) 6
XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*) 6
XPTL::CComObject<COOL::TProxiedSocket>::AddRef() 6
_CFRunLoopFinished 6
_MessageAvailable(void*) 6
__CFRunLoopFindMode 6
__gettimeofday 6
migget_replyport 6
objc_collectingEnabled 6
szonemalloc_shouldclear 6
XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool) 5
XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const 5
XPTL::CComObject<COOL::TProxiedSocket>::Release() 5
dispatch_get_main_queue_port4CF 5
machport_insertmember 5
malloczonemalloc 5
operator delete(void*) 5
Sample analysis of process 517 written to file /dev/stdout -
Update more than 100 authorizations
Hi gurus, i want to know if is possible to update more than 100 authorizations (in BI 7) at the same time.
For example, i want to add the infosite "Zxxxxx" to all authorizations creates for the object "0COSTCENTER".
Is possible to do this trough file, DSO or similar?
Thanks!Hi,
You can assign more that 100 Authorizations
Data Warehousing Workbench u2013 DataStore object/S_RS_ODSO.
Authorizations for working with DataStore objects and their subobjects.
For more details on authorizations go through the link below
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
Regards,
Marasa.
Maybe you are looking for
-
Hi. This is an enigma! Both my husband nad I have iphones which we sync with my mac although on different user accounts. We both use different libraries but also both use only 1 itunes account. Problems 1: Husband has created his own account now
-
I have an IMac desktop -- IMac 11.2 with this software version 10.6.8 I also have an IPhone 4S and an IPad Air, and I want to link all three. My IMac desktop was purchased before ICloud, so ICloud was not pre-installed. How do I install ICloud on the
-
hi, This is pretty urgent.Im not able to creatae delivery for a subcontracting purchase order and for a stock transport order of z document type. Is there any related configurations?I am getting the error "Selection criterium "Delivery creati
-
Appraisal Document Error in ERP6 EHP6 and Portal 7.3
Dear All, I am on ECC6 EHP6 and Portal 7.3 and using WDA ESS and MSS business packages. I have gone through all the below notes: 1600380 - Appraisal Document does not open in portal 1468466 Performance Management Launchpad Configuration 1463821 Perfo
-
Hi, Can somebody explain how to create an IDoc automatically whenever a Production Order is released or changes made to a released production order? Appreciate it. Regards, V M.