Converting DVD footage for use in FCP

I'm sure that this has been asked before, but I can't find it anywhere. Is it possible to take footage from a dvd and edit it in final cut? I have several old projects from my days in television on DVD that I need to use. How is this possible. Thanks in advance!

Welcome to the Forum.
Search is your friend. Surely you jest about "can't find it anywhere". Just scan the posts for the last week or so. Also, read the FCP manual about what format can be edited within FCP.

Similar Messages

Convert vob files for use in FCP X

I need to convert VOB files for use in FCP X on my macbookpro in OS X Lion (10.7.5) I use Clipwrap to convert other formats, but it does not seem to accept VOB for conversion (or if it does, I have not figured out how). In searching the web, I've come across several products that tout themselves as the best, fastest, easiest VOB to Prores converters etc., some that advertise as "free" when actually only a watermarked trial version is free. I have no idea of the actual quality of any of these (some examples are Brorsoft video converter for Mac, and Acrok HD Video Converter...), and would like some input from folks w/ experience in these things before dropping $ on the problem.
In another thread on this site I read something about MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing and I couldn't tell if it applied to my situation or not...
Thanks in advance for any light anyone can shed.

Midnighttrain wrote:
… MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html

Converting DVD Footage for Editing

It is always best to start the editing process with the highest quality, least compressed video format you can obtain. However, sometimes the only source you have for footage is from a DVD*. But since DVD footage is highly compressed and specially formatted as VOB files in order to meet the DVD-Video specification, the files on the DVD must be converted if you plan to edit them in Final Cut.
There are many apps available for converting DVD footage, but it is extremely important that you use the right tool for doing this if you plan to edit the footage. Beware that some apps, like Handbrake, are not designed to convert to an editing format. Using the wrong app can mean wasted time, unneeded quality loss due to multiple conversions, needless rendering in FCP and just plain frustrating.
The two recommended apps for conversion to an editing format are DVDxDV and MPEG Streamclip.
DVDxDV – http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
MPEG Streamclip – http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Nick Holmes has prepared an excellent, step-by-step tutorial on how to do this using the freeware application MPEG Streamclip which can be found here: http://www.secondchairvideo.com/?p=739 (thanks, Nick!). Be sure to read both parts.
-DH
* always make sure you have proper rights and licensing from the copyright owner when using any footage other than your own. DVDxDV and MPEG Streamclip should not be used to convert footage from commercially released DVDs.

Welcome to the Forum.
Search is your friend. Surely you jest about "can't find it anywhere". Just scan the posts for the last week or so. Also, read the FCP manual about what format can be edited within FCP.

Converting VOB Files For use in FCP

Hello,
I have a large FCP project using VOB files shot on a DVD Recorder.
I have been been using a freeware called MPEG Streamclip to convert them into Quicktime Files for use with FCP7. The resulting QT files have all been very choppy when used in the FCP Timeline etc.
I have options with this freeware to convert to MPEG, TS or export to Quicktime, DV, AVI, MPEG4 or other formats.
Any suggestions on how to bring these VOB files into Final Cut Pro so that they work well.
Thanks,
Marc

Nick's tutorial is good. Read it.
I had been using Cinematize for this but would always have trouble with the aspect ratio.
With MPEG Streamclip I have no problems if I do it this way:
Export to QuickTime
Change Compression to: Apple DV/DVCPro-NTSC
Quality: 100%
Frame Size: 720x480 (DV-NTSC)
Sound: Uncompressed (the default)
Make Movie
I do a preset of the above.
Now, when you take that resultant file into FCP:
In FCP make sure your sequence set-up is DV anamorphic (if footage is anamorphic/16:9). When you bring that file into FCP it will not be flagged as anamorphic. In the browser scroll over and check mark it as anamorphic. NOW drag into the timeline. Aspect ratio is good if you do it this way.
Sharon

Converting mts files for use in fcp

i know this horse has already been turned into glue ...
in any case, i have a dvd's worth of mts files provided by a client. can't import them directly into fcp, so i need to run them through some sort of conversion. tried MPEG StreamClip and that doesn't work. Toast is too expensive. demoed VoltaicHD and didn't care for it. the two that worked the best are Moyea HD Video Converter and Pavtube MTS/M2TS Converter that were recommended. very simple interface, reasonable file sizes and much quicker than VoltaicHD. they go for $35 which i guess is reasonable. interestingly they seem like the same exact product just slightly different skins. anyone have any experience with either? one thing that i did find disconcerting is they use SWREG as their e-commerce provider who immediately tried to sell me keycode backup insurance. the whole operation seemed a bit shady to me. anyone have any problems with these guys?
if anyone has any other solutions to this mts conversion issue it'd be appreciated. thanks.

Hi,is your problem resolved? there is a good mts converter for mac of highly-regarded reputation from this forum and other popular camcorder forum.http://www.camcorderinfo.com/bbs/showthread.php?p=251941

Converting .dv files for use in FCP

We recently purchased a Datavideo DN-300 that saves files from our HS-500 switcher in .dv file format. When I put in FCP6 it shows I have to render the file in order to see them play. How should I convert these file so I can work with them better in FCP? Or maybe there is a setting in FCP so I don't have to render the .dv files.

Quality is the same. In compressor under "other workflows", then "advanced format conversions", then "standard definition", use DV NTSC. This will create a .mov file that won't require any rendering. You might bebetter off using a mac and capturing the video via firewire in either Final Cut or Quicktime Pro. I record city meetings right into a four-year-old powermac using Quicktime Pro and at the end of the meeting I have .mov that we can edit and create a "wrap-up" show.
Message was edited by: televisiontim

Converting DVD-r for use in FCE

I have video on DVCPro, which I plan to burn to DVD-r, so that I can edit it in Final Cut Express. Will this work? If so, how?
P.S. I've already downloaded MPEG Streamclip 1.8 (as suggested on another post discussion), but I'm not sure it will do the trick since it didn't say the person started the process with DVD-r.
Help please...deadline looming!!

Yeah, you are right, but the camera and FCE aren't in the same place, and can't be. UGH!
I think my answer lies within your initial question ("Are you burning the raw DVCPRO file to a DVD-r or are you converting your video and burning it as a playable DVD?") Problem is, I have no idea how to anwer this! Sorry I'm so clueless. I think I may have to go back into work, so that I can properly explain the setup to you...but being ever optimistic, I will rudimentarily explain it now, and maybe maybe you'll know what the heck I'm talking about. Ok...I was told all I have to do is pop the DVC Pro tape into the deck, make sure the 'DVD' button is pressed on this thin, silver, shiny machine to the right of it, press play on the deck, press record on the shiny machine. Pathetic, I know...
Thanks for your patience.

Converting wmv files for use in imovie 9 for users who have pc

To convert wmv files use your pc windows movie maker. (if you have one) On your pc, open windows movie maker, get collections and get your wmv project/video, drag it into the timeline, and then save in your computer, save it as an avi file and rename it. After send file to your memory card reader, that way you can transfer that file onto your mac!! And voila! I tried to email it but file became too large so transfering it to a memory card is the easiest. This took me days to figure out, I hope I have helped someone out there.....

I don't want to use DV because these .m2t files are from an HDV camcorder and I want to preserve the aspect ratio and resolution in the files. What other "flavor" of HD would you suggest that I convert them to since (a) I can't bring the files into FCP6 or Compressor (b) I don't see any other flavors of HD to use in VisualHub.
The whole business of converting .m2t files to a FCP6 compatible format, i.e. a Quicktime format, would seem to be one that is commonly encountered, and yet I have never found a thread on this forum that really answers this question: What is the best workflow for converting .m2t files for use in FCP? Surely, one of the pros who frequent this forum must have dealt with this issue and have an answer.
I don't want to have to recapture the files from tape all over again just to use them in FCP6.
Tom

Extract DVDs for use in FCP

I am looking for a good, free DVD extractor that extracts into a Quicktime file for use in FCP.
I downloaded DVDxDV trial version and it pastes that name all over the file.
Thanks!
Steve

Mpeg Streamclip is good / free.

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Capturing audio from telephone for use in FCP

My requirement is quite specific, and so far none of previous posts seem to answer my question. So...
I'm looking to capture audio from my telephone for use in FCP. It won't be a telephone conversation, but a voice text. In other words, an SMS sent to a landline. The audio is saved as a voice message on the answer machine. My phone / answer machine is fairly basic - it has a speaker and the only ports it has is for power and the telephone line itself. I have tried a very basic method of playing the message on speaker and capturing it on a mini DV - but that results in too much audio edit to get it to sound acceptable. My Mac is a G5 and I have the full FC studio, but just not sure of best way to get audio onto the Mac without losing too much of the sound quality.
Any suggestions?
Many thanks all...
Kirsten
iMac G5
iMac G5

you need a telephone audio interface like the products made by the fine folks at gentner, telos or jk audio. i have a celltap from jk audio, works very very well. http://www.jkaudio.com/celltap.htm

Internal SATA DVD burners for use with Encore

I want to buy a SATA internal DVD burner for use with Encore (on Windows XP). I've carefully reviewed the list of Adobe approved Encore-compatible DVD burners and the list seems to only include IDE and external (USB/Firewire) devices. Is there ANY SATA internal DVD burner that is certified to work with Encore?

Not that I know of, but since they appear as normal IDE devices, the procedure should be very much the same. It's more a matter of how reliably the driver for the burner translates the commands, I'd guess.
Mylenium

External Hard Drive for PowerMac G5 for use with FCP Studio

Hello,
I'd greatly appreciate any recommendation for an external hard drive for a PowerMac G5 for use with FCP Studio.
Thanks.
-graziemile

We see alot of Lacie issues here and elsewhere.
Drives fail... period. I believe you hear more about Lacie drives failing because they sell a ton more of them than many other suppliers. I've got 8 of em sitting right here on the desk and two more at the second station. I've lost one since I started using them years ago (and it had problems right out of the box) and I use them pretty heavy.
I understand that they use several different brands of drives in their enclosures, but from my experience they must have pretty good QC standards for what they package.
The guy said the G Techs were a little overkill for his needs. Lacie doesn't pay me. But if someone asks "how are Lacies?" I'll tell them they've been great for me and many others I know, especially if your requirements are capturing DV.
In five years, I ain't heard anybody say anything about it.
As for FCP. I love it! In 20 years of business, it's probably the purchase that's given me the most bang for my buck. But if you haven't heard people knock it, you've never met an Avid zelot, bruhhhhh, just the thought gives me shivers.
The drives X mentioned are designed for video work.
What Studio said, well he gives out some of the best advice on this board
(and maybe the most! ) and my reply to his post... that's why I used the little smiley face. No offence intended X.
I only meant to say that, in a world where software like FCP can do what it does at the price it does it, and drives like Lacie and G Tech can give you the storage they do for the price they do, the line between consumer and professional products is easily blurred.
rh

Exporting HD footage from Avid (PC) for use in FCP (MAC)

Hello,
Here is my issue, there was and HD shoot of my business for local promotional use. I wanted the footage for marketing purposes down the road. I put together most of our promotional video using FCP 5.1.4. The footage was edited on a PC Avid system and exported using an animation codac to quicklime. (This is what the editor said would work)
The footage will not play back correctly, starts off playing for the first second or so and freezes. When I import it into a sequence and render it I can here audio but the canvas remains black. Before I have them export this thing again I wanted to make sure it wasn't an issue on my end. Below are the clip details and CPU info. Thanks in advance for any help.
Clip: 1920 x 1080, 29.97fps, Apple lossless Animation compression, Data rate 190.2 MB/sec, Pixel aspect ratio: square
CPU Info: Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
Message was edited by: Jeffrey W Gilmore

Animation files are much too large data-wise to play back. YOu need to use Compressor to convert them into a codec that is more editable. DVCPRO HD for example...or ProRes. Depending on what hard drives you are trying to play this footage from.
Animation is a good transfer codec, but it needs to be converted.
Shane

Converting DVD footage for use in FCP

Similar Messages

Maybe you are looking for