Converting FLA files to FLV and/or F4V

Hi there,
Novice Q. I'm using the trial version of elearning suite and am unable to import flash video into Captivate. I'm assuming the FLA files need to be converted to FLV or F4V, but I can only generate SMV files, and these do not import into Captivate. I have media encoder start-up faults, which I am trying to address in the relevant forum. Does the encoder need to be active to convert these flash files? Running Mac OS 10.5.8. and wanting to upgrade to Lion soon (which may also be problematic for the media encoder in itself). Thanks.

Thanks for that. swf files import with no visual entry content i.e. there are no playback buttons shown although the video is there. I am pretty green with this, so it could be me as opposed to anything inherently wrong within the prgoram. I have downloaded and used a trial version of Wondershare Video Convertor and generated a flv file that does work in Captivate, so I do have usable video content. I have also looked at the Flash CS5.5 trial version documentation and it says:
The trial versions of After Effects CS5.5, Flash Professional CS5.5, Adobe Premiere Pro CS5.5 and Audition CS5.5 do not include some features that depend on software licensed from parties other than Adobe. For example, some codecs for encoding MPEG formats are available only with the full version of these products. HDV, XDCAM and AVCHD formats and sequence presets are not supported in the trial for both Mac OS and Windows. Adobe Media Encoder export does not include MPEG-4, MPEG-2, MPEG-2 DVD or MPEG-2 Blu-ray as export formats in the trial. The file importer does not recognize file types that are not included in trial mode (such as MPEG and XDCAM files). HDV is not included as a capture format in the Mac OS version of the trial.
My source video has been MPEG-4 so this is likely to be the problem. I'll use the converted video as a sample at the moment.. I'm trying to convince my clients to use this suite, and they will need video capability, so I hope it is not an inherent bug within the program. Ultimately their IT department will take over these types of specifics, as it's not my area. Cheers.

Similar Messages

Convert .fla files for Safari and Chrome

hi boys,
i need to convert .fla file for Safari and Chrome.
i pay for that, after new file is tested, and is ok.
the fee is 40$/file

I'm afraid you have quite a few html errors on the page I tested (about us page) that really need to be fixed - and some of them are likely the cause of the browser rendering the pages differently.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.newpathstherapy.com%2Fabout.h tml
For example, you can only use an ID once per page.
Also a few CSS errors: - in particular the first one - where you have the missing # hash tag before the color declaration. The others relate to the styleing of the scrollbar - which isn't worth the effort really because is a PC IE only thing anyway:
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. newpathstherapy.com%2Fabout.html
I think you have 'overwritten the code for the menu.. particularly the way you have used the IDS - which is causing an issue anyway. The menu can be made more simply and minimally styled with css - see this list of styling list menus:
HORIZONTAL / VERTICAL MENUS:
http://css.maxdesign.com.au/listamatic/
You need to fix those errors and then see how the page stands. If you have further problems after the 'fix', then post back.

Mac Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. You can also convert from AVI to MPEG or other major formats.

What is tyhe best video /audio converter to use on a Mac? To convert
Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. to convert from AVI to MPEG or other major formats?

I prefer using Mac Video Converter software to do video conversion. I convert Quicktime MOV to AVI so that I can play the video on PS3.

How to convert .fla files in .jpg or .pdf ????

Hello to all ,
I am using c# window application 3.5 .I want to convert .fla files to .jpg or another format so please guide me ??????

i'm not sure what you're trying to do but:
1. if you have flash pro, you can open the fla and publish bitmaps of any display object
2. rename the fla extension to zip and unzip it to utilize its bitmaps.

Convert video files TO flv flash files??

Can anyone tell me if there is a shareware program that converts video files to flv???

Can anyone tell me if there is a shareware program that converts video files to flv?
FilmRedux (open source version of Visual Hub) or FFmpegX. Alternatively, you can upload to YouTube, let them convert the file, and then download the converted file version.

Error while converting class file to exp and jca file

error while converting *.class file to *.exp and *.jca file
=====================================================================================================================
linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
conversion completed with 2 errors and 0 warnings.
=====================================================================================================================

i compile a file javacard use this command:
===
javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
===
and try to convert this class use this command
===
/home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
===
result convert:
===
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
converting com.sun.javacard.samples.Identity.Identity
error: export file framework.exp of package javacard.framework not found.
conversion completed with 1 errors and 0 warnings.
===
why ??
please your comment for this problem.
thank 4 all.

Batch convert Pages files to Doc and stay in the same folder?

Hi there,
I use iWork '09 on Mountain Lion. I recently switched to Microsoft Word and prefer it over Pages (personal preference). However, I have nearly 1000 files on my computer that are in Pages format. I have extensively searched this issue in the Apple Support Communities and it appears that there are scripts that DO EXIST that batch convert Pages files into Word files. However, it appears that many of these scripts were built for older versions of iWork and therefore I run into various errors. For example, I used the script available at http://pagesfaq.blogspot.com/2008/01/export-folder-to-word-rtf-pdf-txt-or.html and click run but nothing actually happens (the script runs for less than a second, then I can click run again). I was able to use one script successfully (pasted below), but the only reason I can't use it is because it saves ALL my converted documents in one folder on my desktop and I would like a script that can save them in the original file were the Pages document is located.
So, is there an iWork '09 compatible script that can convert my Pages documents to Word documents and save them in the same folder as the original? Oh, and for an added bonus, it'd be cool if the script also deleted my Pages version after it was done with the conversion
--[SCRIPT batch_exportPages2DOC] (* Enregistrer ce script en tant que script ou progiciel. Exécuter ce script ou déposer l'icône d'un dossier sur son icône. Il ouvre tout document Pages du dossier et l' enregistre en fichier DOC dans le dossier "was_Pages_now_DOC". Celui-ci peut être sur le bureau ou dans le dossier "~/Documents". Si le GUIscripting n'est pas activé le script demande votre mot de passe pour l'activer. Le script récupère le dossier d'exportation par défaut dans le fichier de préférences de Pages. Éviter de cliquer durant l'exécution du script sauf évidemment pour sélectionner le dossier source. ************* Save the script as script or application bundle. Run it or drag and drop a folder icon on its icon. It opens every Pages's documents stored in the folder and save it as DOC file in a folder named "was_Pages_now_DOC". This one may be on the desktop or in the "~/Documents" folder. according to the property storeOnDesktop. If GUIscripting is disabled the script ask for your password to enable it. The script extract the default export path from the Pages's preferences file. Don't click when the script is running. Except, of course, to select the source folder. ************* Yvan KOENIG (VALLAURIS, France) 2008/04/20 2009/06/17 adapté pour format .doc 2009/12/13 updated for MacOs 10.6… *) property theApp : "Pages" property theExt : "pages" property nomDuRapport : "report_Pages2DOC.txt" property nom_du_dossier : "was_Pages_now_DOC" property storeOnDesktop : true (* true = dest folder will be on Desktop false = dest folder will be in "~/Documents" *) property msg1 : "" -- globale property msg90 : "" -- globale property msg91 : "" -- globale -- property msg92 : "" -- globale property msg94 : "" -- globale property msg96 : "" -- globale property msg99 : "" -- globale property rapport : "" -- globale property dossierDeStockage : "" -- globale property dossierParDefaut : "" -- globale property localExport : "" -- globale property newExt : "" -- globale property newType : "" -- globale property isOs4 : missing value -- globale property isOs5 : missing value -- globale property theMenu : missing value -- globale property menuExport : missing value -- globale property types : {{"doc", "SLDocumentTypeMSWord", 2}, {"pdf", "SLDocumentTypePDF", 1}, {"txt", "SLDocumentTypePlainText", 4}, {"rtf", "SLDocumentTypeRichText", 3}, {"rtfd", "SLDocumentTypeRichTextBundle"}, 3} --===== (* our settings *) property typeNum : 1 (* 1 = WORD, 2 = PDF, 3 = Txt, 4 = rtf, 5 = rtfd *) property theButton : missing value (* 1 button PDF 2 button Word 3 button RTF 4 button Standard *) --===== on run (* lignes exécutées si on double clique sur l'icône du script application • lines executed if one double click the application script's icon *) tell application "System Events" to set dossier to choose folder (* dans un bloc System Events pour avoir un titre de dialogue "localisé" • in a System Events block to get a localized dialog title. *) my commun({dossier}) -- my commun({"Macintosh HD:Users:yvan_koenig:Desktop:for_see:" as alias}) end run --===== on open (sel) (* sel contient une liste d'alias des éléments qu'on a déposés sur l'icône du script (la sélection) • sel contains a list of aliases of the items dropped on the script's icon (the selection) *) my commun(sel) end open --===== on commun(elems) my nettoie() my prepareMessages() tell application "System Events" if not (UI elements enabled) then set (UI elements enabled) to true (* Active le GUI scripting • Enable GUI scripting *) set titres to title of processes end tell -- to System Events if theApp is not in titres then my activateTheApp() (* Active et ferme la fenêtre du document créé à l'ouverture • Activate and close the doc's window created at opening *) set {newExt, newType, theButton} to item typeNum of types (* item 1 = {"doc", "SLDocumentTypeMSWord",2} item 2 = {"pdf", "SLDocumentTypePDF",1} item 3 = {"txt", "SLDocumentTypePlainText",4} item 4 = {"rtf", "SLDocumentTypeRichText",3} item 5 = {"rtfd", "SLDocumentTypeRichTextBundle",3} *) set sysAtt to (system attribute "sys2") if 4 > sysAtt then if my parleAnglais() then error "This script requires MacOs X 10.4 or higher !" else error "Ce script requiert MacOs X 1.4 ou ultérieur !" end if else if 5 > sysAtt then set isOs4 to true set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 9 end if else if 6 > sysAtt then set isOs4 to false set isOs5 to true if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if else set isOs4 to false set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if end if my fermeFenetres() (* • Close existing windows *) my afficheLeMessage(msg1) (* Éviter de cliquer… • Don't click… *) tell application theApp to set localExport to localized string "Export" set dossierParDefaut to my getDefaultExport() as text set rapport to "" set dossierDeStockage to my creeDossierDeStockage(nom_du_dossier) (* Unicode text *) try repeat with elem in elems try my exploreTraite(elem as alias, "") end try end repeat if rapport = "" then set rapport to msg90 -- crée un fichier texte sur le Bureau set p2d to path to desktop set p2r to (p2d as Unicode text) & nomDuRapport tell application "System Events" if exists (file p2r) then delete (file p2r) make new file at end of p2d with properties {name:nomDuRapport} end tell set rapport to rapport as text write rapport to (p2r as alias) on error MsgErr number NroErr if NroErr is not -128 then beep 2 tell application (path to frontmost application as string) to ¬ display dialog "" & NroErr & " : " & MsgErr with icon 0 buttons {msg99} giving up after 20 end if -- NroErr is… return end try my nettoie() if my parleAnglais() then my afficheLeMessage("Export done.") else my afficheLeMessage("Traitement terminé.") end if end commun --===== on nettoie() (* pour ne pas stocker dans le fichier script • So it will not be stored in the script file *) set dossierDeStockage to "" set dossierParDefaut to "" set rapport to "" set localExport to "" set newExt to "" set newType to "" set isOs4 to missing value set isOs5 to missing value set theMenu to missing value set menuExport to missing value set theButton to missing value set msg1 to "" set msg90 to "" set msg91 to "" set msg92 to "" -- set msg94 to "" set msg96 to "" set msg99 to " " end nettoie --===== on afficheLeMessage(m) beep 1 tell application (path to frontmost application as string) activate if my parleAnglais() then display dialog m buttons {" OK "} default button 1 giving up after 10 else display dialog m buttons {" Vu "} default button 1 giving up after 10 end if end tell end afficheLeMessage --===== on creeDossierDeStockage(Nom) (* S'il n'existe pas, construit un dossier destination sur le bureau ou dans "~/Documents" • If does not exist, create a destination folder on the desktop or in "~/Documents" *) local dd, dds if storeOnDesktop is true then set dd to path to desktop as Unicode text else set dd to path to documents folder as Unicode text end if if Nom ends with ":" then set dds to dd & Nom else set dds to dd & Nom & ":" end if (* dossierDeStockage n'existe pas, on le crée • dossierDeStockage is not available, build it *) tell application "System Events" to if not (exists item dds) then make new folder at end of folder dd with properties {name:Nom} return dds as Unicode text end creeDossierDeStockage --===== on exploreTraite(elem, ptree) (* elem est un alias • elem is an alias *) local elem_, cl_, type_Id set elem_ to elem as Unicode text tell application "System Events" to tell disk item elem_ set cl_ to class if cl_ is folder then set type_Id to "" else set type_Id to type identifier end if end tell -- "System Events" set cl_ to cl_ as Unicode text if type_Id is in {"com.apple.iwork.pages.pages", "com.apple.iwork.pages.sffpages"} then (* C'est un fichier Pages. • It's a Pages document *) my TraiteUnDocument(elem_) else if cl_ is in {"file package", "«class cpkg»"} then set rapport to rapport & msg91 & elem_ & return (* "Package", Attention, un package EST un dossier "spécial". • Caution, a package IS a "special" folder. *) else if cl_ is in {"folder", "«class cfol»"} then my ExploreUnDossier(elem_, ptree) else set rapport to rapport & msg92 & elem_ & return (* "Pas un document Pages". • "Not a Pages's document" *) end if -- typeId_ is … end exploreTraite --===== on ExploreUnDossier(dossier, ptree) local nomElement, cheminElement, c repeat with nomElement in list folder dossier without invisibles set cheminElement to dossier & nomElement tell application "System Events" to set c to name of (dossier as alias) my exploreTraite(cheminElement as alias, ptree & c & ":") end repeat end ExploreUnDossier --===== on TraiteUnDocument(leCheminOriginal_UniText) my export2Doc(leCheminOriginal_UniText as alias, leCheminOriginal_UniText) end TraiteUnDocument --===== on export2Doc(p, leCheminOriginal_UniText) (* • here p is the path as alias *) local flag, nom_de_p, nouveauChemin, w, bof, x, p_xport try tell application theApp open p set flag to false repeat 300 times (* Attends que le fichier soit réellement ouvert. • Wait until the file is really open *) if my getNbWindows() > 0 then set flag to true exit repeat end if end repeat end tell -- to theApp if flag is false then error number 8888 (* Le fichier n'a pu être ouvert. • The file can't be open. *) on error MsgErr number NroErr if NroErr = 8888 then set rapport to rapport & msg94 & leCheminOriginal_UniText & return else set rapport to rapport & "### " & MsgErr & " ### " & errNbr & return end if return (* can't do the remaining tasks *) end try tell application "System Events" to tell file leCheminOriginal_UniText set nom_de_p to name end tell -- System Events if nom_de_p ends with theExt then set nom_de_p to text 1 thru -(2 + (length of theExt)) of nom_de_p set nouveauChemin to dossierParDefaut & nom_de_p & "." & newExt --log nouveauChemin tell application "System Events" to if exists (file nouveauChemin) then set name of file nouveauChemin to nom_de_p & my horoDateur(modification date of file nouveauChemin) & "." & newExt (* name stamped *) try set {w, bof} to my getFrontWindow() tell application "System Events" to tell application process theApp click menu item menuExport of menu 1 of menu bar item theMenu of menu bar 1 (* Exporter… *) repeat until exists sheet 1 of window w delay 0.1 end repeat tell sheet 1 of window w (* sheet containing the buttons PDF, Word, RTF, Standard *) -- get properties of UI elements of radio group 1 if isOs4 then click button theButton of radio group 1 else if isOs5 then click checkbox theButton of radio group 1 else click radio button theButton of radio group 1 (* I hope that they will no longer change it *) end if -- isOs4 is true (* if typeNum is 2 then delay 0.2 tell pop up button 1 click click menu item quality of menu 1 end tell delay 0.2 end if *) click button 1 (* Suivant… *) repeat until exists button localExport delay 0.1 end repeat click button localExport (* Exporter… *) end tell -- to sheet… repeat 20 times if exists sheet 1 of window w then click button 2 of sheet 1 of window w (* "Ne pas consulter " dans éventuel rapport d'anomalies • "Don't review" in sheet reporting possible export anomalies *) exit repeat end if delay 0.1 end repeat end tell -- to process … System Events if dossierDeStockage is not dossierParDefaut then (* we must move the file from folder dossierParDefaut to folder dossierDeStockage *) set p_xport to dossierDeStockage & nom_de_p & "." & newExt tell application "System Events" to if exists (file p_xport) then set name of file p_xport to nom_de_p & my horoDateur(modification date of file p_xport) & "." & newExt tell application "Finder" to duplicate file nouveauChemin to folder dossierDeStockage (* • before 10.5, System Events is unable to move *) my wait4File(p_xport) tell application "System Events" to if exists file nouveauChemin then delete file nouveauChemin end if -- dossierDeStockage is not… my ferme1fenetre() on error errMsg number errNbr set rapport to rapport & msg96 & p & return & errMsg & " ### " & errNbr & return end try end export2Doc (* ===== • Build a stamp from the modification date_time *) on horoDateur(dt) local annee, mois, jour, lHeure, lesSecondes, lesMinutes set annee to year of dt set mois to month of dt as number (* existe depuis 10.4 *) set jour to day of dt set lHeure to time of dt set lesSecondes to (lHeure mod 60) set lHeure to round (lHeure div 60) set lesMinutes to (lHeure mod 60) set lHeure to round (lHeure div 60) return "_" & annee & text -2 thru -1 of ("00" & mois) & text -2 thru -1 of ("00" & jour) & "-" & text -2 thru -1 of ("00" & lHeure) & text -2 thru -1 of ("00" & lesMinutes) & text -2 thru -1 of ("00" & lesSecondes) (* • Here, the stamp is "_YYYYMMDD-hhmmss" *) end horoDateur (* ===== • Take care, the front window may be an Inspector or a dialog one. *) on getFrontWindow() local namesOfWindows, w, flag tell application theApp to activate set flag to false tell application "System Events" to tell application process theApp set namesOfWindows to name of every window repeat with w in namesOfWindows if subrole of (get properties of window w) is "AXStandardWindow" then set flag to true exit repeat end if end repeat end tell return {w, flag} (* • w is the name of the front document's window *) end getFrontWindow (* ===== • Wait that the file is completely written on disk *) on wait4File(p) (* • p must be Unicode text *) local oldSize, nnn, newSize set oldSize to 0 tell application "System Events" to set nnn to name of file p repeat try tell application "System Events" to set newSize to physical size of file p if oldSize < newSize then set oldSize to newSize else exit repeat end if end try end repeat end wait4File --===== on activateTheApp() local bof, status tell application theApp to activate if my getStartingStatus() is false then tell application "System Events" to tell application process theApp to keystroke return repeat set {bof, status} to my getFrontWindow() if status is true then exit repeat end repeat end activateTheApp (* ===== • Close existing open windows *) on fermeFenetres() repeat while my getNbWindows() > 0 my ferme1fenetre() end repeat (* • Now there is no open window *) end fermeFenetres --===== on ferme1fenetre() tell application theApp to activate tell application "System Events" to tell application process theApp to keystroke "w" using {command down} end ferme1fenetre --===== on getPlistValue(valName, default) local thePlist, u set thePlist to (path to preferences folder as Unicode text) & "com.apple.iWork." & theApp & ".plist" tell application "System Events" if exists file thePlist then tell contents of property list file thePlist try set u to (value of property list item valName) (* Unicode Text *) on error (* On est là si Pages n'a rien enregistré avec des préférences neuves • Here if Pages never saved with the new preferences file. *) set u to default end try end tell -- to contents of… else (* On est là s'il n'y a pas de fichier de préférences • Here if there is no preferences file. *) set u to default end if end tell -- to system events return u end getPlistValue --===== on getStartingStatus() return my getPlistValue("LSDefaultsUseDefaultStartingPoint", false) end getStartingStatus --===== on getDefaultExport() local u (* son of a *****, I forgot that they don't use the same name !! *) if theApp contains "Pages" then set u to my getPlistValue("SLDocumentDefaultExportDirectory", "~/Documents") else if theApp contains "Numbers" then set u to my getPlistValue("LSDocumentDefaultExportDirectory", "~/Documents") else error "I didn't coded a Keynote version !" end if set u to (POSIX file (do shell script "echo " & u)) as text if u ends with ":" then return u else return (u & ":") end if end getDefaultExport --===== on getNbWindows() tell application "System Events" to tell application process theApp to return count of windows end getNbWindows --===== on getLocale(a, x) tell application a to return localized string x end getLocale --===== on getVersion() try tell application theApp to return version on error return "1" end try end getVersion --===== on parleAnglais() local z try tell application theApp to set z to localized string "Cancel" on error set z to "Cancel" end try return (z is not "Annuler") end parleAnglais --===== on prepareMessages() if my parleAnglais() then set msg1 to "Don’t click when the script is running." & return & "Except, of course, if it ask for." set msg90 to "No problem during the export process." set msg91 to "Package" set msg92 to "Not a " & theApp & "’s document" -- set msg94 to theApp & " can’t read it" set msg96 to "Not copied." set msg99 to "Oops" else set msg1 to "Éviter de cliquer durant l’exécution du script" & return & "sauf s’il le demande." set msg90 to "Exportation réussie sans incident." set msg91 to "Package" set msg92 to "Pas un document " & theApp -- set msg94 to theApp & " n’a pas pu le lire" set msg96 to "Pas copié." set msg99 to " Vu " end if set msg91 to "### " & msg91 & " ### " set msg92 to "### " & msg92 & " ### " -- set msg94 to "### " & msg94 & " ### " set msg96 to "### " & msg96 & " ### " end prepareMessages --===== --[/SCRIPT]

Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf.

I subscribed to Adobe PDF Pack, why can't I convert Pdf files to doc and/or jepg with my acrobat reader XI

I subscribed to Adobe PDF Pack, why can't I convert Pdf files to doc and/or jepg with my acrobat reader XI
I purchased the Pack three days ago, asked to sign in. when I try to sign in, I am led to a page to purchase the program.
What do I need to do to activate my subscribtion, so it will work with my reader XI?

Hi helmutb86458194,
Did you have an update for us? Your response came through blank...
Best,
Sara

How to convert a file of emails and the attachments to pdf?

In adobe pro XI, how do you convert a file of emails AND their attachments to pdf?

Unfortunately, that did not work either. I am thinking this may not be possible (at least with 10.1.3.4). What I was hoping for was that I could audit the presentation catalog groups and users. I want to be able to get a list of all the users and the groups they are listed in. Again, this would be helpful so we do not need to keep an external record. If we are removing access to a user or updating the group, we want to make sure we remove them from all applicable groups (Settings>Administration>Manage Presentation Catalog Groups and Users)

I'm using CS6 Design Web & Prem. When I use Media Encoder to convert WMV file to FLV the top portio

Hi,
I'm using CS6 Design Web & Prem. When I use Media Encoder to convert WMV file to FLV the top portion of the video is not visible. How can I fix the issue?
Thanks!

It's a Windows Update bug:
WMV files corrupted on import or export
Mylenium

Shareware program that converts video files TO flv Flash files?

Can anyone tell me if there is a shareware program that converts video files to flv???

from past experience there is nothing free available that either works or produces basic quality
try this for $49:
http://www.verticalmoon.com/products/video2swf/video2swf.htm#overview

Convert FLA/SWF to FLV

Hello, although I’m sure this topic has already popped
up in this forum, I was still unable to find a satisfactory answer
nor was I able to hear from Adobe regarding this…
I do have to convert SWFs or FLAs to FLVs; is there a way to
do so? I find it extremely frustrating that if you develop a movie
using flash, although you can export it to a Windows avi file or to
a QuickTime movie, you cannot export it to an FLV… I
understand that the word “Flash” from FLash Video means
that you can view it via Flash player, but wouldn’t it make
sense to be able to export a Flash movie to an FLV using Adobe
“Creative” Suite rather than having to use some obscure
software to perform the conversion?
Thanks.

I've been saying this since Adobe first introduced the FLV
video format.
They give you a separate application bundled with Flash so
that you can convert to FLV, and they slipstreamed it into Flash
itself for importing videos (all videos get converted to FLV on
import). But for some reason, they haven't given us the ability to
export FLV directly out of Flash. Makes no sense to me. (especially
when we can export FLV out of Photoshop...)

Convert WMV files to MPEG and/or get Quicktime plug-in for WMV and AVI

Hi Apple experts,
I need to convert some WMV files to MPEG format or something that will play natively on a Mac in QuickTime or iTunes.
I was advised that the VLC app that will convert WMV to MPEG4?... but the page at the URL below indicates that this version of VLC is a player and does not say anything about converting WMV to MPEG...
http://vlc-download.com/download-vlc/?gclid=COrY_NKghKYCFQN7gwoduQy4qA
I would like to convert WMV files to MPEG so they will play in QuickTime or in iTunes on a Mac by just double-clicking them... for family members with Macs like me.
I am working on a PC where I am right now, but I have Macs at home and at work. I am on a PC for the time being at a friends place and I've produced a few .wmv files in Windows Live Movie Maker 2011. (Sorry Steve, it's just for a test).
QuickTime will not play WMV files, nor AVI files, but it indicates that it can use a plug-in to do so, but the QuickTime webpage for plug-ins that it takes me to doesn't have any plug-ins for WMV or AVI format files.
Of course the Windows Media Player plays the WMV and AVI files, but is there also a way to make them play in QuickTime or iTunes besides converting them?
Thanks so much,
numetro

Hi QTKirk,
I would like to be able to just give my family these files on a CD for high-res viewing on a computer, in addition to the DVDs that I have made for their TVs.
Since I don't control what they install on their computers, they don't necessarily have Flip4Mac on their Macs like I do... I just want them to be able to play MPEGs from a file on a CD or on their hard drives by simply double-clicking them.
After working with the recommended VLC player that also allegedly converts WMV files to MPEGs, for 8 hours, I have a result with the 7th attempt that mimics the worst kind of modern digital art that I've ever seen... I wish I could plug in the screenshot of the MPEG video that VLC produced... completely useless garbage.
Are there any other suggestions for a converter that simply handles converting WMV to any kind of MPEG file?
FFE was going to be the one that I tried until I read a post about VLC... that turned out to be a waste of 8 hours of sleepless time.
numetro

CONVERT SCANNED FILE TO PDF AND SEND TO EMAIL!

I got many files that were scanned in (110) to be exact. I need to know how to convert the scanned files to pdf and then send them to an email. Thanks Marie

What is the format (file type) of these scanned docs?

Convert .FLA files to .MP3?

Is there an application (freeware/shareware) that will convert flash .FVA files to .MP3? I've tried ffmpegx but it doesn't reconginize the .fva file and using the encoder in VLC player just produces a file full of static. My search has turned up fruitless so far so any help will be appreciated.

After further research I found a freeware app called Max that will convert .FLAC files to .MP3. I had to add a "C" to the extension of the orginal file but it worked perfectly.
Here's the link if anyone else is interested:
http://sbooth.org/Max/

Converting FLA files to FLV and/or F4V

Similar Messages

Maybe you are looking for