Converting Forms and Reports 6i into Jdeveloper

Can we convert Forms and Reports 6i into Jdeveloper? If yes then
please give me the detail. Thanks.

I have read on Metalink:
MS Windows XP Professional certification: XP is currently not certified or supported on any release of Designer/SCM (Awaiting other related (IDS) products certification).
Maybe the problem is caused by this.

Similar Messages

Converting forms and reports to 10g

I am converting both forms and reports from 6i to 10g. Most of the reports work fine, however I am having problems with a few of them. When I run the reports from a URL, they run fine. However, when I try and call them from the forms, I get a REP-188: Reports Server only accepts batch jobs error message. I have looked around for information on what could cause this, but have only found the following:
How to use the BATCH commandline parameter when moving from RWCLI60 (6i) to RWCLIENT (9i) ?
When using RWCLIENT and the BATCH parameter is passed, the value always has to be YES. The Reports Server only accept batch jobs and cannot handle interactive requests in Oracle9i Reports. If you are passing BATCH=NO you will get an error: REP-188: Reports Server only accept batch jobs
I don't specify BATCH=NO anywhere, so am unsure of what is causing this problem.
We are using Mode=Batch, Destype=Cache for all 20 reports that are run from forms. 6 out of the 20 give us the REP-188 error. We have also tried Mode=Runtime, but this does not help.
Please advise.

I'm not in a position YET to help you work out a solution. But I propose a trade.
If you can help me get my reports server going (see my post of today 19th) then I promise to help investigate your problem.
Interested? If you are UK based then you can call me on 01202 862459
Trev.

Calling oracle9iAS Forms and reports into the portal

Hi !
Could it possible to call a Forms and reports in the portals? if yes ? How?
In my case I have to generate lots of reports..like printing reports in the different tray of printer through portal ? Could this be achieved by Oracle Portal ?
thanks in advance
chris

Do you know how to do it by now.
Thanks.

Importing oracle forms and reports into workbenches

Good day I am trying to understand the correct method of
Using workbenches how does one import oracle forms and reports.
Within my work group we think jsp and java are the technology being used.

Hi Rajesh,
But i have not installed IAS at all. I have only Forms and Reports 10g and Oracle database installed. As you said it only save on IAS, but can we save it on local machine. Is there any other alternative.
Again my second issues is --> I want to remove Mail option and rename Cache option to PDF from Destype combo box which appears at run time.
Any idea how we can do this?

Oracle Forms and Reports Installation - Creating domain failed

I installed the weblogic 10.3.6 (Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package Installer) in my Microsoft Windows(32-bit JVM) system first.
But there was an error occorred when the package of forms and reports (Oracle Forms and Reports 11gR2 (11.1.2.2.0)) was installing.
Please find the following error message for your reference.
Do you have any idea? Please kindly advise.
Thanks a lot!
2014-04-02 14:11:14,099 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:16,185 INFO [main] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:18,205 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option ServerStartMode to "prod"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option ServerStartMode to "prod"
2014-04-02 14:11:18,490 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,604 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,612 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find Server "AdminServer" as obj1
2014-04-02 14:11:18,652 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find Server "AdminServer" as obj1
2014-04-02 14:11:18,698 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,705 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,706 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,724 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,735 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - delete obj3
2014-04-02 14:11:18,763 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: delete obj3
2014-04-02 14:11:18,764 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create User "weblogic" as obj4
2014-04-02 14:11:18,768 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create User "weblogic" as obj4
2014-04-02 14:11:18,771 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,821 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,822 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,830 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,833 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,948 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,953 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,954 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2014-04-02 14:11:21,609 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd link=Start Admin Server for Weblogic Server Domain
2014-04-02 14:11:21,659 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd link=Stop Admin Server
2014-04-02 14:11:21,667 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Windows\system32\rundll32.exe link=Admin Server Console
2014-04-02 14:11:21,759 INFO [Thread-1] com.oracle.cie.domain.DomainRegistryWrapper - need to initialize domainRegistrydocument object
2014-04-02 14:11:21,777 INFO [Thread-1] com.oracle.cie.domain.DomainGenerator - Domain Generation Successful!
2014-04-02 14:11:21,783 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,011 WARN [main] com.oracle.cie.domain.template.dependency.TemplateSelectionTarget - Catalog does not have matching template for location C:\Users\GZ\AppData\Local\Temp\tmp1396419069239wls.jar
2014-04-02 14:11:22,071 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,100 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology - Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
2014-04-02 14:11:22,101 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
com.oracle.cie.domain.ConfigGroupsException: Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
at com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology.merge(ConfigGroupsEngine.java:2762)
at com.oracle.cie.domain.ConfigGroupsEngine.mergeTopology(ConfigGroupsEngine.java:551)
at com.oracle.cie.domain.ConfigGroupsEngine.merge(ConfigGroupsEngine.java:479)
at com.oracle.cie.domain.AbstractTemplate.addConfigGroups(AbstractTemplate.java:314)
at com.oracle.cie.domain.script.ScriptExecutor.addTemplate(ScriptExecutor.java:605)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.addTemplate$20(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py:89)
at org.python.pycode._pyx3.call_function(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py:42)
at org.python.pycode._pyx15.call_function(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)

hi user ...
on windows there are some steps in front of installation and configuration.
1) cleare the Windows Env (Path .. Programme x86 )
no Blank in Path and so on
2) insert into your local host file your server and IP Adress
3) in Windows 32 setup of WLS is JDK included so you don't have to install the jdk in front of WLS
4) verify if you are using the right installation medium (jdk 32 bit, wls 32 bit , fmw 32 bit
in your OraInventory/logs directory is a *.out file for your installation please can you put this file in the forum
is there a nodemanager up and running (if so please stop)
Jan-Peter

Migration MS ACCESS FORMS and Reports to Oracle (Java or Forms or Reports)

Hello ,
can someone tell me, how i can migrate a whole MS ACCESS 2000 mdb (with forms and Reports) to Oracle.
I think i have first migrate the Access DB with the OMWB to Oracle and in the next Step to convert the VBA Code to JAVA or Forms9i.
BUT Is there a tool available for Migrating VBA code like the OMWB ????

I don't know if this is an obvious question, but do you have MS Access 2k installed on the machine you are trying to run this from? I'm assuming yes.
If you do and there is still a problem, you should log a ticket for support who will take your mdb and help out with the issue for you.
Many thanks
Barry

Error while Rebuild Forms and Reports Executables

Dear Experts,
Kindly note that while running the below commands I am facing the below error.
Please look into it and advise.
Rebuild Forms and Reports Executables
cd $ORACLE_HOME/forms/lib32
Note: if this directory does not exist:
cd $ORACLE_HOME/forms/lib
$ make -f ins_forms.mk sharedlib install
cd $ORACLE_HOME/reports/lib32
Note: if this directory does not exist:
cd $ORACLE_HOME/reports/lib
$ make -f ins_reports.mk install
[applmgr@ORACLE lib]$ make -f ins_forms.mk sharedlib install
for libs in libfrmjsl.so.0 libd2f.so.0 libia.so.0 libic.so.0 libicg.so.0 libid1.so.0 libid2.so.0 libidd.so.0 libidg.so.0 libidl.so.0 libie.so.0 libifc.so.0 libifg.so. 0 libig.so.0 libigo.so.0 libihm.so.0 libiic.so.0 libilfrm.so.0 libimc.so.0 libimg.so.0 libioc.so.0 libiod.so.0 libipc.so.0 libipg.so.0 libiplsn.so.0 libiplsd.so.0 lib irm.so.0 libit.so.0 libitg.so.0 libiwc.so.0 libiwg.so.0 libsosd.so.0 libibfrmw.so.0 libicw.so.0 libifcw.so.0 libijc.so.0 libijcw.so.0 libiffw.so.0 libiicw.so.0 libiif w.so.0 libiiiw.so.0 libimfw.so.0 libipfw.so.0 libiqw.so.0 libitw.so.0 libiwcw.so.0 libiwfw.so.0 libixw.so.0 libsosdw.so.0; do \
                rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//$libs ; \
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/bin/genshlib /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//$libs ; \
        done
rm -f frmbld
gcc -m32 -o frmbld -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2 /lib//stubs -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/ apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/s0nnmain.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sslidtab.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ui10.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/uiicxd.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ifzxtb.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sixn.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sixp.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/iwvgbm.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libie.a -lilfrm /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libie.a -lig -lifg -lig -limg -liwg -lidd -lidl -l idg -lid2 -lidg -lid1 -ligo -litg -lihm -limg -lipg -licg -lipc -limc -lifc -lijc -liwc -liplsd -liod -lioc -lic /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libsosd .a -liic -lit -lic /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libsosd.a -lipc \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/istuic.o \
        -lrws \
        -lnn -lobx -lzrc -lvgs -lde -lucol -lca -luicc -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -luihx -luc -luipr -luimotif -lot -lrem -lree   -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -ld fc -luat -lutc -lutj -lutl -lutsl -lpls10 -lplp10 -lplc10 -lpls10 -lplp10 -lslax10 -lsql10 -lpthread -lclntsh `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/l dflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10 -ln sgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /u01/a pplmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2 /lib/ldflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls1 0 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat /u01/applmgr/CDV1E BS1/apps/tech_st/10.1.2/lib/sysliblist` -Wl,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u0 1/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/xawt:/lib:/usr/lib -lm `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lpthread -lm     -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ -lsnls10 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/l ib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads -ljvm -Wl,-rp ath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `realpath@GLIBC_2.3'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
collect2: ld returned 1 exit status
make: *** [frmbld] Error 1
[applmgr@ORACLE lib]$
[applmgr@ORACLE lib]$ make -f ins_reports.mk install
rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.so; \
        rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
        /usr/bin/ar x /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
        /usr/bin/gcc -m32 -o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.so -shared -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ rwsutil.o rwspid.o \
        -lm /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
        /usr/bin/ar x /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -m32 -o rwbuilder -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2//lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//stubs -rdynamic -Bdynamic -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/ui10.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/uiicxd.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwsng.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwscl.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwssc.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwssc0.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwsdt.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwscr.o -lrw /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a -lobx -lnn -lrws -lde /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//libzrc.a -lrws   -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10    -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -Wl,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/xawt:/lib:/usr/lib -lm `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lpthread -lm   -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ -lsnls10 -lpthread -ljvm -Wl,-rpath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a -lnsl
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `realpath@GLIBC_2.3'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
Regards
Mohammed. Abdul Muqeet

Please implement the solution in (Upgrading JDK To 7_25 - Step 3.7 Rebuild Forms Reports: Error: Collect2: Ld Returned 1 Exit Status (Doc ID 1569998.1)).
Thanks,
Hussein

Form and report on the same page...

Hi,
I want to have a form and report on the same page... as soon as user enters the information and submit the form via button then the report should be able to display the addition...
may I know how to accomplish this...
Thanks in advance

Hi
Can you try like this
1.First create an empty page and add a html region and template as form region and add the necessary fields to insert into table
2. create a another region with type as "SQL Query" and template as report region and add the necessary fields for the reports.
Once u entered the details into form region and created process and insert into table and then automatically the report region query will fetch the recently added row and displays in the report.
Hopes this might helps you.
Thanks & Regards
Srikkanth.M

How to have RAC accept Forms and Reports connection to non specific node?

Hi all,
I have posted this in the Forms forum w/ no result, hoping someone here can help;
Oracle Forms and Reports services, not the entire app server. Version 10.1.2.0.2, one server
Oracle database, RAC Version 11.1.0.6.0, 3 nodes
Instance=RMSTEST
Nodes = RMSTEST1, RMSTEST2, RMSTEST3
I can TNSPING RMSTEST w/o issue
When I have userid in formsweb.cfg = user/pw@RMSTEST we are being prompted when logging into forms and reports to supply the password for the RMSTEST instance, enter the password and we are in.
So we changed this in formsweb.cfg = user/pw@RMSTEST? (?= any of the nodes 1-3) and the password prompt is no longer being requested.
What do I need to do to have Forms and Reports connect to the RMSTEST cluster directly for it to determine which node to connect to instead of having an unbalanced node(s)?
Thanks,
Steve

This is what I have;
RMSTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.111)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.112)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.113)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RMSTEST)
LISTENERS_RMSTEST =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.111)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.112)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.113)(PORT = 1521))
RMSTEST3 =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.113)(PORT = 1521))
     (CONNECT_DATA =
     (SERVER = DEDICATED)
     (SERVICE_NAME = RMSTEST)
     (INSTANCE_NAME = RMSTEST3)
RMSTEST2 =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.112)(PORT = 1521))
     (CONNECT_DATA =
     (SERVER = DEDICATED)
     (SERVICE_NAME = RMSTEST)
     (INSTANCE_NAME = RMSTEST2)
RMSTEST1 =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.12.111)(PORT = 1521))
     (CONNECT_DATA =
     (SERVER = DEDICATED)
     (SERVICE_NAME = RMSTEST)
     (INSTANCE_NAME = RMSTEST1)
)

How To Start Forms and Reports From Start Command

Hi All,
How to start Oracle Forms and Reports in Oracle8i My OS is Windows 2000.Please tell the procedure to get into forms and reports.
Otherwise we have to install other software for Forms and Reports.
Thanks
Sujan

Sujan,
what does the database have to do with starting Forms and Reports ? If you are on Wondows2000 then navigate to the \bin directory if the Oracle Home you installed Oracle9iDS to. Type ifbld90 for Forms and rwbuilder for Reports design environment.
If your ability to start Forms and Reports from the command line is your only exit criteria in evaluating software for a project , how far will you go with it?
Frank

Problem hiding userid etc in cookie using 10.1.2.0.2 Forms and Reports

Hi
Background
I am new to 10.1.2.0.2 Forms and Reports and also to Application Server - though not to Oracle forms and reports. We are currently converting from 6i.
Due to security concerns we would very much like to use the FrmReportsInteg Bean (or like) to hide userid connect string in a temporary and encrypted cookie when trying to run a report from a form (and the report has a report parameter screen that we want to display).
Firstly I have to decide how we are going to use reports via the Developer Suite -for development work. Then I have to work out how to do it via the Application Server - for testing and production. So if you have two variations of any solutions - one for DS and one for AS, could you give both please?
Problem
Problem is that I cannot get the bean to work. I get report parameter form displaying ok, hit submit and then get the Database User Authentication window poppling up with the "REP-51018: Need database user authentication" error that I've noticed a few other people in this forum have had too. If the user id etc is then entered in this window, the report parameter form redisplays (from a second html) and submitting this causes the report to display. Don't like the Database User Authentication window poppling up and don't like the second parameter form - html for this has the userid etc in it.
For me though I can't even get the bean to output any logs. Got any ideas to help me at least output some logs?
Also do I have to do anything to the browser (IE6) to get it to read the cookies?
Do I need to change the bean code for the DS in some way - eg to avoid using domain name (as I noticed in another thread)?
My code exactly follows the whitepaper and I also carefully followed the instructions for adding the bean to the form and configuring the forms services - as per white paper.
Looking forward to some answers
Pamela

hi Kashif,
just check this thread,
How to deploy Forms/report on Application Server 10.1.3
Regards,
Hamdy

How can i save and retrieve blob data through forms and reports...

I have blob data type column and I want to save word, html, gif
document in oracle database through forms 6 and retrieve the
data into forms and reports.
Details : I want to open .doc,.html,.gif file through a button
and save it ..and i want retrieve the data into text item same
in reports....
If anybody have the answer then send me at
[email protected]

use ole container
initialize the container with the filename (doc or gif)
Edited by: arshid on Feb 8, 2009 1:57 PM

Query on install Oracle AS Forms and Reports Services

Hi All,
I want to install 'Oracle Internet Application Server Products - Forms and Reports', I referenced the 'Forms and Reports Services Installation Guides 10g Release 2(10.1.2) for Windows B16392-02'.
I install successfully up to Chapter 5.
When I jump into Chapter 6 of the release (Configuring Forms and Reports Services to Use an Oracle Application Server Infrastructure), I followed the guideline but could not see my AS has any way to allow me to configure Oracle Identity Management/OracleAS Metadata Repository/Starting OPMN Services/Testing the Configuration.... Is it because my AS is just for Forms and Reports and not a full feature one? How I can test my AS is working?
On the other hand, is it possible to migrate forms and reports from old version like Developer 2000 4.5 to 10g? Any reference or suggestion?
And what I need to do more with the current AS in order to allow me to upload forms and reports to it? Please kindly advise.
Best Regards
AC

Hi AC!
There are two versions of Forms and Reports: one standalone and one as part of the Application Server. The second one will offer the Infrastructure. If you use the second one then you will have an Infrastructure after the installation.
Seems to me that you do not have the complete AS but the standalone version.
cu
Andreas

AS 10g forms and reports services install

I only have Developer 9.0.2 loaded. I want to load AS10g Forms and Report Services but I'm not sure how this relates to my old instance of Developer. Should I reuse the Oracle Home of the 9.0.2 Developer instance for the new install or do I need to create a new Oracle Home? I noticed in the OUI that a "complete" Installation Type will also load Developer. Does this mean I should be doing an upgrade rather than an install? Do I need to just trash the 9.0.2 instance and start anew?
Thanks, Chris

Chris,
I suggest to install into a complete new Oracle Home. If you mix two installs you end up with unpredictable behaviours, if not in Forms then possibly in otehr components. Note that this mustn't be the case, but better is.
Frank

OAS 10G Forms and Reports Forms - Removing old sessions

I am currently running Oracle Application Server 10.1.2.0.2 Forms and Reports Services Install.The problem that I am experiencing is that some users don't log out of our application and after 8 hours of inactivity our DB logs the users out of Oracle. This leaves forms sessions attached to the application server. Is there a way that I can remove these connections without having to manually log into Enterprise manager and disconnect them? I was hoping to be able to run a script at night and disconnect all sessions that have been connected for x number of hours or better yet find an option that I can configure in my forms setup to limit connect_time to a certain length of time. Any suggestions would be appreciated.

Have you modfied the timeout parameter ? This will help to exit the application when there is no activity
Rajesh

Converting Forms and Reports 6i into Jdeveloper

Similar Messages

Maybe you are looking for